problemi con modem dial up

Riconoscimento, installazione e configurazione delle periferiche.
Scrivi risposta
gere
Prode Principiante
Messaggi: 10
Iscrizione: lunedì 25 ottobre 2010, 22:04

problemi con modem dial up

Messaggio da gere »

Salve a tutti sono nuovo sia di ubuntu e sia del forum.
il mio problema è che non ho adsl e l'unico modo di connettermi che ho è il dial up.Ho installato ubuntu 9.10 ieri e il problema che ho riscontrato è che non ho  la piu pallida idea di come connettermi con ubuntu.
ho cercato e ricercato ho trovato qualche programma ma non riesco neanche ad installarlo perche lo devo scaricare con windows e poi andare su ubuntu ma non so come fare...
quello che so sul mio modem è questo: HDAUDIO Soft Data Fax Modem with SmartCP (COM3)
ho un portatile dell'hp  pavilion dv6000...non so se sia utile a qualcosa....
Se qualcuno fosse tanto gentile ad indicarmi come si fa...perche sulle guide sparse qua e la nella rete non ci ho capito niente...grazie in anticipo..
Ultima modifica di gere il lunedì 25 ottobre 2010, 22:34, modificato 1 volta in totale.
Avatar utente
steff
Moderatore Globale
Moderatore Globale
Messaggi: 40367
Iscrizione: domenica 18 febbraio 2007, 19:48
Desktop: LXQt+labwc
Distribuzione: Arch; Debian; Ubuntu Server
Sesso: Maschile
Località: Toscana
Contatti:

Re: problemi con modem dial up

Messaggio da steff »

Inanzitutto ti conviene di usare il DVD invece del cd per installare, se hai solo il dialup. E' un modem seriale?

Prova

Codice: Seleziona tutto

sudo wvdialconf
ma temo che non hanno installato wvdial nella 9.10.

Se è un cosidetto softmodem o winmodem scarica scanmodem, lancialo e posta ModemData.txt
http://wiki.ubuntu-it.org/Hardware/Modem/Dialup
Hai fatto un backup oggi? Ieri?? Quando???
La Documentazione da consultare e la FAQ sul uso del forum
Sistemi: LXQt - semplice, modulare e configurabile + *ubuntu in Vbox
gere
Prode Principiante
Messaggi: 10
Iscrizione: lunedì 25 ottobre 2010, 22:04

Re: problemi con modem dial up

Messaggio da gere »

eheheh :-[
sono proprio all'inizio....
devo mettere scanmodem su qualche cartella particolare??
perche quando digito sul terminale quel comando mi dice comando non esistente o qualcosa del genere..
gere
Prode Principiante
Messaggi: 10
Iscrizione: lunedì 25 ottobre 2010, 22:04

Re: problemi con modem dial up

Messaggio da gere »

niente non riesco neanche a far andare scanModem... :'( :'(
Avatar utente
steff
Moderatore Globale
Moderatore Globale
Messaggi: 40367
Iscrizione: domenica 18 febbraio 2007, 19:48
Desktop: LXQt+labwc
Distribuzione: Arch; Debian; Ubuntu Server
Sesso: Maschile
Località: Toscana
Contatti:

Re: problemi con modem dial up

Messaggio da steff »

Basta leggere e seguire le istruzioni: deve essere nella home, non sulla scrivania o altro.
http://wiki.ubuntu-it.org/Hardware/Mode ... /Scanmodem

Non è quindi un modem seriale?
Hai fatto un backup oggi? Ieri?? Quando???
La Documentazione da consultare e la FAQ sul uso del forum
Sistemi: LXQt - semplice, modulare e configurabile + *ubuntu in Vbox
gere
Prode Principiante
Messaggi: 10
Iscrizione: lunedì 25 ottobre 2010, 22:04

Re: problemi con modem dial up

Messaggio da gere »

Codice: Seleziona tutto

 jerry@jerry-laptop:~$ cd Scrivania
bash: cd: Scrivania: Nessun file o directory
jerry@jerry-laptop:~$ gunzip scanModem.gz
gzip: scanModem.gz: No such file or directory
jerry@jerry-laptop:~$ 
ho provato in tutti i modi ma non ci riesco...
non so cosa significa seriale  :-\ :-[
Avatar utente
steff
Moderatore Globale
Moderatore Globale
Messaggi: 40367
Iscrizione: domenica 18 febbraio 2007, 19:48
Desktop: LXQt+labwc
Distribuzione: Arch; Debian; Ubuntu Server
Sesso: Maschile
Località: Toscana
Contatti:

Re: problemi con modem dial up

Messaggio da steff »

Un modem analogico connesso tramite la porta seriale.
Dove hai quel file scanmodem.gzip? Mettilo nella tua home , tasto destro sul file > unzip
poi

Codice: Seleziona tutto

./scanModem
Hai fatto un backup oggi? Ieri?? Quando???
La Documentazione da consultare e la FAQ sul uso del forum
Sistemi: LXQt - semplice, modulare e configurabile + *ubuntu in Vbox
gere
Prode Principiante
Messaggi: 10
Iscrizione: lunedì 25 ottobre 2010, 22:04

Re: problemi con modem dial up

Messaggio da gere »

Codice: Seleziona tutto

 Only plain text email is forwarded by the  Discuss@Linmodems.org List Server,
 as HTML can contain viruses. Use as the email Subject Line:
           YourName, YourCountry  kernel 2.6.31-19-generic 
 With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
 YourCountry will enable Country specific guidance. Linux experts in YourCountry 
 can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@Linmodems.org are sometimes blocked by an Internet Provider mail filters.
 So in a day, also check the Archived responses at http://www.linmodems.org 
--------------------------  System information ----------------------------
CPU=i686,  Ubuntu ,  ALSA_version=1.0.20
Linux version 2.6.31-19-generic (buildd@palmer) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #56-Ubuntu SMP Thu Jan 28 01:26:53 UTC 2010
 scanModem update of:  2010_05_29

Distrib_ID=Ubuntu
DistribCodeName=karmic
AptRepositoryStem=http://it.archive.ubuntu.com/ubuntu/


Presently install your Linux Distributions dkms package. It provides for automated driver updates,
following upgrade of your kernel.  For details see http://linux.dell.com/projects.shtml#dkms

 There are no blacklisted modem drivers in /etc/modprobe*  files 

 Potentially useful modem drivers now loaded are:
       snd_hda_intel           

Attached USB devices are:
 ID 0c45:62c0 Microdia Sonix USB 2.0 Camera
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is:  http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html

If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@linmodems.org

Candidate PCI devices with modem chips are:
00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2)
High Definition Audio cards can host modem chips.

For candidate card in slot 00:10.1, firmware information and bootup diagnostics are:
 PCI slot	PCI ID		SubsystemID	Name
 ----------	---------	---------	--------------
 00:10.1	10de:026c	103c:30b7	Audio device: nVidia Corporation MCP51 High Definition Audio 

 Modem interrupt assignment and sharing: 
 21:          1        913   IO-APIC-fasteoi   HDA Intel
 --- Bootup diagnostics for card in PCI slot 00:10.1 ----
[    0.185000] pci 0000:00:10.1: reg 10 32bit mmio: [0xc0000000-0xc0003fff]
[    0.185038] pci 0000:00:10.1: PME# supported from D3hot D3cold
[    0.185042] pci 0000:00:10.1: PME# disabled
[   24.439035] HDA Intel 0000:00:10.1: PCI INT B -> Link[LAZA] -> GSI 21 (level, high) -> IRQ 21
[   24.439090] HDA Intel 0000:00:10.1: setting latency timer to 64

 The PCI slot 00:10.1 of the modem card may be disabled early in 
 a bootup process,  but then enabled later. If modem drivers load 
 but the  modem is not responsive, read DOCs/Bootup.txt about possible fixes.
 Send dmesg.txt along with ModemData.txt to discuss@linmodems.org
 if help is needed.
 


===== Advanced Linux Sound Architecture (ALSA) diagnostics ===== 
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.

The modem cards detected by "aplay -l"  are: None


The /proc/asound/pcm file reports:
-----------------------
00-00: CONEXANT Analog : CONEXANT Analog : playback 1 : capture 1
00-01: Conexant Digital : Conexant Digital : playback 1

about /proc/asound/cards:
------------------------
 0 [NVidia         ]: HDA-Intel - HDA NVidia
                      HDA NVidia at 0xc0000000 irq 21

 PCI slot 00:10.1 has a High Definition Audio Card
 The drivers are in the kernel modules tree at:
 /lib/modules/2.6.31-14-generic/kernel/sound/pci/hda/snd-hda-intel.ko
/lib/modules/2.6.31-19-generic/kernel/sound/pci/hda/snd-hda-intel.ko

 The HDA diagnostics did not recognize a modem chip on the audio subsystem,
 though a Conexant chip modem might not be recognized.

=== Finished firmware and bootup diagnostics, next deducing cogent software. ===

Predictive  diagnostics for card in bus 00:10.1:
	Modem chipset  detected on
NAME="Audio device: nVidia Corporation MCP51 High Definition Audio "
CLASS=0403
PCIDEV=10de:026c
SUBSYS=103c:30b7
IRQ=21
HDA2=00:10.1
SOFT=10de:026c.HDA
ArchivedChip=0x14f12bfa
CodecClass=14f1
IDENT=hsfmodem
Driver=hsfmodem-drivers

 For candidate modem in:  00:10.1
   0403 Audio device: nVidia Corporation MCP51 High Definition Audio 
      Primary device ID:  10de:026c
    Subsystem PCI_id  103c:30b7 
    Softmodem codec or chipset from diagnostics: 
                               from    Archives: 0x14f12bfa
                        
      

Support type needed or chipset:	hsfmodem


For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read DOCs/Conexant.txt


For all code packages from Linuxant.com, either a driver set matching the boot kernel will be installed,
or the drivers will first be compiled and then installed. The expert on modem software for Linux is
"Support (Jonathan)" <modem.support@linuxant.com>

 From  http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
 download hsfmodem-7.80.02.06full_k2.6.31_19_generic_ubuntu_i386.deb.zip 
 Under Linux unpack with:
 $ unzip hsfmodem*.zip
 Then install with:
 $ sudo dpkg -i hsfmodem*.deb
 Subsequently, the modem should be found with
 $ sudo wvdialconf /etc/wvdial.conf
 Edit in your personal information with:
 $ sudo gedit /etc/wvdial.conf
 and try dialing out with:
 $ sudo wvdial.
 See DOCs/Testing.txt  for details.
 
 The directions following below need only be pursued, if the above procedures are not adequate.

Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to find the
hsfmodem package matching your System. For several Linux distros, there are
precompiled drivers matched to specific kernels. These have within the FileName,
your KernelVersion:	2.6.31_19_generic
They can be found through http://www.linuxant.com/drivers/hsf/full/downloads.php 
A more precise location may be given a few paragraphs below.
If an EXACT Match with your your KernelVersion is not found, the needed drivers 
will be auto compiled anyway. Alternatively, one of the 
"Generic packages with source" near the bottom of the page must be used.
Downloaded packages must be moved into the Linux partition (home folder is OK)
and unzipped with:
	unzip hsf*.zip
The installation command for a .deb suffic packages is, with root/adm permission:
  sudo dpkg -i hsf*.deb
while for .rpm suffix it is, with:
  rpm -i hsf*.rpm
 Read DOCs/Conexant.txt

Writing DOCs/Conexant.txt


 Completed candidate modem analyses.

 The base of the UDEV device file system is: /dev/.udev

 Versions adequately match for the compiler installed: 4.4.1
             and the compiler used in kernel assembly: 4.4.1


 
 Minimal compiling resources appear complete:
   make utility - /usr/bin/make
   Compiler version 4.4
   linuc_headers base folder /lib/modules/2.6.31-19-generic/build

 However some compilations and executable functions may need additional files,
 in the FileNames.h (so called kernel "h"eaders) collection installed in  /usr/include/ .
 For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default. 
 Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
 In not included on your install CD, search for them at http://packages.ubuntu.com
 or comparable Repository for other Linux distros.
 When compiling ALSA drivers, the utility "patch" will also be needed.




If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$  apt-get update
$  apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb


Checking pppd properties:
	-rwsr-xr-- 1 root dip 277352 2009-02-20 18:25 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
    http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
	$ su - root  (not for Ubuntu)
        sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
	sudo chmod a+x /usr/sbin/pppd

Checking settings of:	/etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

For guidance on FAX usage, get from http://linmodems.technion.ac.il/packages/  get faxing.tar.gz
It has samples for a modem using port /dev/ttySL0, which must be changed to match your modem's port.

Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.

 Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================

 Checking for modem support lines:
 --------------------------------------
     /device/modem symbolic link:   
slmodemd created symbolic link /dev/ttySL0:  
     Within /etc/udev/ files:

     Within /etc/modprobe.conf files:
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------

alla fine ci son riuscito  ;D
comunque grazie dell'interessamento..
Avatar utente
steff
Moderatore Globale
Moderatore Globale
Messaggi: 40367
Iscrizione: domenica 18 febbraio 2007, 19:48
Desktop: LXQt+labwc
Distribuzione: Arch; Debian; Ubuntu Server
Sesso: Maschile
Località: Toscana
Contatti:

Re: problemi con modem dial up

Messaggio da steff »

La notizia buona: il driver c'è, quella brutta: la licenza per usarlo a piena velocità costa, credo $19

Da  http://www.linuxant.com/drivers/hsf/ful ... tu-x86.php
scarica hsfmodem-7.80.02.06full_k2.6.31_19_generic_ubuntu_i386.deb.zip
scompattalo (nella home!) col tasto destro

Codice: Seleziona tutto

 sudo dpkg -i hsfmodem*.deb
Prova (sperando che è installato wvdial)

Codice: Seleziona tutto

 sudo wvdialconf  
Se dice "wvdial: comand not found bisogna installare qualche pacchetto, se va basta inserire i parametri in

Codice: Seleziona tutto

gksu gedit /etc/wvdial.conf
Hai fatto un backup oggi? Ieri?? Quando???
La Documentazione da consultare e la FAQ sul uso del forum
Sistemi: LXQt - semplice, modulare e configurabile + *ubuntu in Vbox
gere
Prode Principiante
Messaggi: 10
Iscrizione: lunedì 25 ottobre 2010, 22:04

Re: problemi con modem dial up

Messaggio da gere »

wvidial non c'è...avevo letto già giorni fà di questo programma...ma non sono riuscito a trovare dove scaricarlo...e se ho capito bene servono ancha degli altri file per farlo funzionare...

ah andando a scaricare il file che mi hai detto ho notato che non c'è
hsfmodem-7.80.02.06full_k2.6.31_19_generic_ubuntu_i386.deb.zip
ho scaricato il file: hsfmodem-7.80.02.06full_k2.6.31_17_generic_ubuntu_i386.deb.zip
  va bene lo stesso??
Ultima modifica di gere il giovedì 28 ottobre 2010, 21:58, modificato 1 volta in totale.
Avatar utente
steff
Moderatore Globale
Moderatore Globale
Messaggi: 40367
Iscrizione: domenica 18 febbraio 2007, 19:48
Desktop: LXQt+labwc
Distribuzione: Arch; Debian; Ubuntu Server
Sesso: Maschile
Località: Toscana
Contatti:

Re: problemi con modem dial up

Messaggio da steff »

Hanno fatto una ***ata non fornirlo più di default. Ho trovato questo:

Ma il problema è il 19/17: dovresti scaricare la versione esatta per il tuo kernel, meglio provare il generico:
http://www.linuxant.com/drivers/hsf/ful ... 86.deb.zip

Potresti anche fare un pensiero e installare la 10.04 che ha supporto fino il 2013, la 9.10 tra mezz'anno è fuori supporto, e scaricare/installara dal dvd che contiene molti pacchetti wvdial compreso.
Hai fatto un backup oggi? Ieri?? Quando???
La Documentazione da consultare e la FAQ sul uso del forum
Sistemi: LXQt - semplice, modulare e configurabile + *ubuntu in Vbox
gere
Prode Principiante
Messaggi: 10
Iscrizione: lunedì 25 ottobre 2010, 22:04

Re: problemi con modem dial up

Messaggio da gere »

ora provo a installare questi pacchetti...
ma semmai volevo provare ad installare la 10.10...quando riesco a scaricarla da qualche mio amico..
Scrivi risposta

Ritorna a “Driver e periferiche”

Chi c’è in linea

Visualizzano questa sezione: steff e 9 ospiti