Non posso masterizzare CD

Riconoscimento, installazione e configurazione delle periferiche.
neobuna
Prode Principiante
Messaggi: 18
Iscrizione: mercoledì 21 febbraio 2007, 8:22
Contatti:

Non posso masterizzare CD

Messaggio da neobuna »

Ciao a tutti,
ho un problema col masterizzatore. Leggo tranquillamente CD e DVD, masterizzo bene DVD ma non c'è verso di masterizzare CD (dati, audio, immagini iso).
Ho kubuntu 10.04 e uso K3b, anche Brasero presenta lo stesso problema.
Ho letto qua e la di problemi simili a cdrecord e wodim ma sinceramente nulla mi è sembrato saggio da provare, sapete darmi qualche suggerimento su cosa provare ?

Allego il log di k3b dopo ennesimo fallimento:

Codice: Seleziona tutto

Devices
-----------------------
HL-DT-ST DVDRAM GH24NS50 XP01 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R sequenziale, DVD-R sequenziale a doppio strato, DVD-R jump a doppio strato, DVD-RAM, DVD-RW a riscrittura limitata, DVD-RW sequenziale, DVD+RW, DVD+R, DVD+R a doppio strato, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Riscrittura limitata, Livello Jump] [%7]

System
-----------------------
K3b Version: 1.91.0
KDE Version: 4.4.2 (KDE 4.4.2)
QT Version:  4.6.2
Kernel:      2.6.32-25-generic

Used versions
-----------------------
cdrecord: 1.1.10

cdrecord
-----------------------
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.10
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 0 = CD-DA
Driveropts: 'burnfree'
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   : 
Vendor_info    : 'HL-DT-ST'
Identification : 'DVDRAM GH24NS50 '
Revision       : 'XP01'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009 (CD-R)
Profile: 0x0012 (DVD-RAM) 
Profile: 0x0011 (DVD-R sequential recording) 
Profile: 0x0015 (DVD-R/DL sequential recording) 
Profile: 0x0016 (DVD-R/DL layer jump recording) 
Profile: 0x0014 (DVD-RW sequential recording) 
Profile: 0x0013 (DVD-RW restricted overwrite) 
Profile: 0x001A (DVD+RW) 
Profile: 0x001B (DVD+R) 
Profile: 0x002B (DVD+R/DL) 
Profile: 0x0010 (DVD-ROM) 
Profile: 0x0009 (CD-R) (current)
Profile: 0x000A (CD-RW) 
Profile: 0x0008 (CD-ROM) 
Profile: 0x0002 (Removable disk) 
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE 
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1053696 = 1029 KB
Drive DMA Speed: 16712 kB/s 94x CD 12x DVD
FIFO size      : 12582912 = 12288 KB
Speed set to 706 KB/s
pregap1: -1
Track 01: audio   36 MB (03:36.72) no preemp swab copy
Track 02: audio   37 MB (03:42.57) no preemp swab copy
Track 03: audio   21 MB (02:06.46) no preemp swab copy
Track 04: audio   27 MB (02:45.65) no preemp swab copy
Track 05: audio   28 MB (02:47.37) no preemp swab copy
Track 06: audio   35 MB (03:29.53) no preemp swab copy
Track 07: audio   28 MB (02:50.12) no preemp swab copy
Track 08: audio   18 MB (01:50.76) no preemp swab copy
Track 09: audio   16 MB (01:39.77) no preemp swab copy
Track 10: audio   30 MB (03:01.32) no preemp swab copy
Track 11: audio   32 MB (03:13.08) no preemp swab copy
Track 12: audio   24 MB (02:27.41) no preemp swab copy
Track 13: audio   36 MB (03:38.49) no preemp swab copy
Track 14: audio   26 MB (02:39.64) no preemp swab copy
Track 15: audio   33 MB (03:18.53) no preemp swab copy
Track 16: audio   37 MB (03:43.28) no preemp swab copy
Track 17: audio   28 MB (02:48.08) no preemp swab copy
Track 18: audio   34 MB (03:24.60) no preemp swab copy
Track 19: audio   34 MB (03:25.58) no preemp swab copy
Track 20: audio   31 MB (03:08.09) no preemp swab copy
Track 21: audio   39 MB (03:53.61) no preemp swab copy
Track 22: audio   22 MB (02:15.10) no preemp swab copy
Track 23: audio   28 MB (02:50.37) no preemp swab copy
Track 24: audio   39 MB (03:52.68) no preemp swab copy
Track 25: audio   27 MB (02:46.20) no preemp swab copy
Track 26: audio   30 MB (03:03.49) no preemp swab copy
Total size:      798 MB (79:08.56) = 356142 sectors
Lout start:      799 MB (79:10/42) = 356142 sectors
Current Secsize: 2048
  ATIP start of lead in:  -11634 (97:26/66)
  ATIP start of lead out: 359846 (79:59/71)
Disk type:    Short strategy type (Phthalocyanine or similar)
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 359846 Blocks current: 359846 Blocks remaining: 3704
Starting to write CD/DVD at speed   4.0 in real TAO mode for single session.
Last chance to quit, starting real write in    2 seconds.
   1 seconds.
   0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Starting new track at sector: 0
Track 01:    0 of   36 MB written.
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB:  2A 00 00 00 00 00 00 00 1B 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 72 0B 00 00 00 00 00 0E 09 0C 00 00 00 03 00 00
Sense Key: 0x0 No Additional Sense, Segment 11
Sense Code: 0x00 Qual 0x03 (setmark detected) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 4.332s timeout 40s
/usr/bin/wodim: A write error occured.
/usr/bin/wodim: Please properly read the error message above.
write track data: error after 0 bytes
Writing  time:   13.309s
Average write speed 357.9x.
Fixating...
Fixating time:   63.209s
/usr/bin/wodim: fifo had 192 puts and 1 gets.
/usr/bin/wodim: fifo was 0 times empty and 0 times full, min fill was 100%.

cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=4 -tao driveropts=burnfree -useinfo -audio /tmp/kde-neobuna/k3b_audio_0_01.inf /tmp/kde-neobuna/k3b_audio_0_02.inf /tmp/kde-neobuna/k3b_audio_0_03.inf /tmp/kde-neobuna/k3b_audio_0_04.inf /tmp/kde-neobuna/k3b_audio_0_05.inf /tmp/kde-neobuna/k3b_audio_0_06.inf /tmp/kde-neobuna/k3b_audio_0_07.inf /tmp/kde-neobuna/k3b_audio_0_08.inf /tmp/kde-neobuna/k3b_audio_0_09.inf /tmp/kde-neobuna/k3b_audio_0_10.inf /tmp/kde-neobuna/k3b_audio_0_11.inf /tmp/kde-neobuna/k3b_audio_0_12.inf /tmp/kde-neobuna/k3b_audio_0_13.inf /tmp/kde-neobuna/k3b_audio_0_14.inf /tmp/kde-neobuna/k3b_audio_0_15.inf /tmp/kde-neobuna/k3b_audio_0_16.inf /tmp/kde-neobuna/k3b_audio_0_17.inf /tmp/kde-neobuna/k3b_audio_0_18.inf /tmp/kde-neobuna/k3b_audio_0_19.inf /tmp/kde-neobuna/k3b_audio_0_20.inf /tmp/kde-neobuna/k3b_audio_0_21.inf /tmp/kde-neobuna/k3b_audio_0_22.inf /tmp/kde-neobuna/k3b_audio_0_23.inf /tmp/kde-neobuna/k3b_audio_0_24.inf /tmp/kde-neobuna/k3b_audio_0_25.inf /tmp/kde-neobuna/k3b_audio_0_26.inf
Avatar utente
gianmpu
Rampante Reduce
Rampante Reduce
Messaggi: 7721
Iscrizione: giovedì 15 novembre 2007, 17:11

Re: Non posso masterizzare CD

Messaggio da gianmpu »

"Chi c**a sott' 'a neve, pure si ffa 'a bbuca e poi 'a copre, quanno 'a neve se scioje, 'a mm***a vie' sempre fori" T. Milian
neobuna
Prode Principiante
Messaggi: 18
Iscrizione: mercoledì 21 febbraio 2007, 8:22
Contatti:

Re: Non posso masterizzare CD

Messaggio da neobuna »

Allora ho seguito la procedura indicata per installare cdrecord nell aversione 3.0
Purtroppo riavviando e provando  a masterizzare ho un errore di buffer undenrrun. ::)

Codice: Seleziona tutto

Devices
-----------------------
HL-DT-ST DVDRAM GH24NS50 XP01 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R sequenziale, DVD-R sequenziale a doppio strato, DVD-R jump a doppio strato, DVD-RAM, DVD-RW a riscrittura limitata, DVD-RW sequenziale, DVD+RW, DVD+R, DVD+R a doppio strato, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Riscrittura limitata, Livello Jump] [%7]

System
-----------------------
K3b Version: 1.91.0
KDE Version: 4.4.2 (KDE 4.4.2)
QT Version:  4.6.2
Kernel:      2.6.32-25-generic

Used versions
-----------------------
cdrecord: 3.0

cdrecord
-----------------------
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
SCSI buffer size: 64512
/usr/bin/cdrecord: Warning: DMA resid 0 for 'read buffer', actual data is too short.
/usr/bin/cdrecord: Warning: The DMA speed test has been skipped.
Cdrecord-ProDVD-ProBD-Clone 3.00 (i686-pc-linux-gnu) Copyright (C) 1995-2010 J�rg Schilling
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.9'.
Driveropts: 'burnfree'
atapi: 1
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   : 
Vendor_info    : 'HL-DT-ST'
Identifikation : 'DVDRAM GH24NS50 '
Revision       : 'XP01'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Current: CD-R
Profile: DVD-RAM 
Profile: DVD-R sequential recording 
Profile: DVD-R/DL sequential recording 
Profile: DVD-R/DL layer jump recording 
Profile: DVD-RW sequential recording 
Profile: DVD-RW restricted overwrite 
Profile: DVD+RW 
Profile: DVD+R 
Profile: DVD+R/DL 
Profile: DVD-ROM 
Profile: CD-R (current)
Profile: CD-RW 
Profile: CD-ROM 
Profile: Removable Disk 
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE 
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R LAYER_JUMP
Drive buf size : 1053696 = 1029 KB
Drive pbuf size: 1966080 = 1920 KB
FIFO size      : 4194304 = 4096 KB
Track 01: data   693 MB        
Total size:      796 MB (78:51.94) = 354896 sectors
Lout start:      796 MB (78:53/71) = 354896 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 5
Disk Is not unrestricted
Disk Is not erasable
  Disk sub type: Medium Type A, high Beta category (A+) (3)
  ATIP start of lead in:  -11634 (97:26/66)
  ATIP start of lead out: 359846 (79:59/71)
Disk type:    Short strategy type (Phthalocyanine or similar)
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
    Capacity  Blklen/Sparesz.  Format-type  Type
           0             2048         0x00  No Media Present or Unknown Capacity
Blocks total: 359846 Blocks current: 359846 Blocks remaining: 4950
Starting to write CD/DVD/BD at speed 8 in dummy SAO mode for single session.
Last chance to quit, starting dummy write in 3 seconds.
   2 seconds.
   1 seconds.
   0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
Turning BURN-Free on
Sending CUE sheet...
/usr/bin/cdrecord: WARNING: Drive returns wrong startsec (0) using -150
/usr/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB:  2A 00 FF FF FF 6A 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 72 0B 00 00 00 00 00 0E 09 0C 00 00 00 03 00 00
Sense Key: 0x0 No Additional Sense, Segment 11
Sense Code: 0x00 Qual 0x03 (setmark detected) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.502s timeout 200s
Writing pregap for track 1 at -150
write track pad data: error after 0 bytes
BFree: 1024 K BSize: 1029 K
Starting new track at sector: 0
Track 01:    0 of  693 MB written.
/usr/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB:  2A 00 00 00 00 00 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 2A 30 01 80 21 02 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.002s timeout 200s
/usr/bin/cdrecord: The current problem looks like a buffer underrun.
/usr/bin/cdrecord: It looks like 'driveropts=burnfree' does not work for this drive.
/usr/bin/cdrecord: Please report.
/usr/bin/cdrecord: Make sure that you are root, enable DMA and check your HW/OS set up.
write track data: error after 0 bytes
Writing  time:    5.556s
Average write speed 858.6x.
Fixating...
WARNING: Some drives don't like fixation in dummy mode.
Fixating time:   27.349s
/usr/bin/cdrecord: fifo had 64 puts and 1 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.

cdrecord command:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=/dev/sr0 speed=8 -sao -dummy driveropts=burnfree -data -tsize=354896s -
Scrivi risposta

Ritorna a “Driver e periferiche”

Chi c’è in linea

Visualizzano questa sezione: steff e 9 ospiti