problema serio

Installazione, configurazione e uso di programmi e strumenti.
Scrivi risposta
zanna5
Prode Principiante
Messaggi: 78
Iscrizione: lunedì 23 agosto 2010, 14:15

problema serio

Messaggio da zanna5 »

salve! volevo chiedere aiuto per un fatto sgradevole che mi capita troppo spesso con ubuntu 9.10, installato 1 mese fa tramite usb e con procedura standard apparentemente corretta.. non chiedetemi il perché o il per come, ma quando gli gira, il mio schermo diventa tutto nero con una lineetta (bianca orizzontale) in alto a sinistra che pulsa (tipo un terminale) e mi lampeggia anche il sensore che si accende quando mettiamo il tasto permanente per le maiuscole.
Ovviamente la macchina poi non risponde a nessun comando e devo spegnerla di forza col pulsante.. Sono onesto e so che forse mi attirerò critiche da tanti di voi, pero' windows non mi dava tutti questi problemi..

Se sapete aiutarmi aiutatemi per piacere! buona giornata a tutti.
Ultima modifica di zanna5 il domenica 5 dicembre 2010, 11:53, modificato 1 volta in totale.
Avatar utente
pieddu
Tenace Tecnocrate
Tenace Tecnocrate
Messaggi: 13453
Iscrizione: sabato 11 novembre 2006, 21:46
Desktop: Mate XFCE
Distribuzione: Devuan Trisquel
Sesso: Maschile
Località: Serravalle di Chienti (Taverne)

Re: problema serio

Messaggio da pieddu »

zanna5 ha scritto:Sono onesto e so che forse mi attirerò critiche da tanti di voi, pero' windows non mi dava tutti questi problemi..
Senza critiche, ma cosa speri di ottenere con questa affermazione?

I sintomi sono quelli di un kernel-panic.
Allega l'output di

Codice: Seleziona tutto

dmesg
:birra:
zanna5
Prode Principiante
Messaggi: 78
Iscrizione: lunedì 23 agosto 2010, 14:15

Re: problema serio

Messaggio da zanna5 »

I sintomi sono quelli di un kernel-panic.
Allega l'output di

Codice: Seleziona tutto

dmesg
come faccio ad allegartelo!? è una sfilza interminabile di cose.. =) comunque grazie per l'aiuto..veramente gentile..
JiraiyaAbura
Prode Principiante
Messaggi: 26
Iscrizione: sabato 4 dicembre 2010, 19:31

Re: problema serio

Messaggio da JiraiyaAbura »

Copia il testo poi vai sulla discussione aperta è premi il pulsante "inserisci codice" in seguito inserisci il tutto li dentro e otterai una cosa del genere:

Codice: Seleziona tutto

Ti uscirà una cosa del genere
Canale youtube:http://www.youtube.com/user/ZabuzaSama1994?feature=mhum
Se mi volete aggiungere su SKYPE:NinoBSD
zanna5
Prode Principiante
Messaggi: 78
Iscrizione: lunedì 23 agosto 2010, 14:15

Re: problema serio

Messaggio da zanna5 »

Codice: Seleziona tutto

 
[    0.466581] highmem bounce pool size: 64 pages
[    0.466587] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.468357] VFS: Disk quotas dquot_6.5.2
[    0.468424] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.469109] fuse init (API version 7.12)
[    0.469207] msgmni has been set to 1681
[    0.469428] alg: No test for stdrng (krng)
[    0.469443] io scheduler noop registered
[    0.469446] io scheduler anticipatory registered
[    0.469449] io scheduler deadline registered
[    0.469500] io scheduler cfq registered (default)
[    0.469514] pci 0000:00:02.0: Boot video device
[    0.500147]   alloc irq_desc for 24 on node -1
[    0.500150]   alloc kstat_irqs on node -1
[    0.500165] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[    0.500178] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[    0.500355]   alloc irq_desc for 25 on node -1
[    0.500357]   alloc kstat_irqs on node -1
[    0.500367] pcieport-driver 0000:00:1c.2: irq 25 for MSI/MSI-X
[    0.500380] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[    0.500499] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.500656] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.501262] ACPI: AC Adapter [ADP1] (off-line)
[    0.501339] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.501344] ACPI: Power Button [PWRF]
[    0.501404] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    0.501408] ACPI: Power Button [PWRB]
[    0.501457] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[    0.503993] Switched to high resolution mode on CPU 0
[    0.600104] ACPI: Lid Switch [LID0]
[    0.600160] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[    0.600164] ACPI: Sleep Button [SLPB]
[    0.603735] Monitor-Mwait will be used to enter C-1 state
[    0.603763] Monitor-Mwait will be used to enter C-2 state
[    0.603786] Monitor-Mwait will be used to enter C-3 state
[    0.603795] Marking TSC unstable due to TSC halts in idle
[    0.603818] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[    0.603846] processor LNXCPU:00: registered as cooling_device0
[    0.603851] ACPI: Processor [CPU0] (supports 8 throttling states)
[    0.608573] thermal LNXTHERM:01: registered as thermal_zone0
[    0.608583] ACPI: Thermal Zone [TZ00] (27 C)
[    0.608640] isapnp: Scanning for PnP cards...
[    0.963034] isapnp: No Plug & Play device found
[    0.964546] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.966057] brd: module loaded
[    0.966574] loop: module loaded
[    0.966662] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[    0.966741] ahci 0000:00:1f.2: version 3.0
[    0.966754]   alloc irq_desc for 19 on node -1
[    0.966757]   alloc kstat_irqs on node -1
[    0.966763] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.966797]   alloc irq_desc for 26 on node -1
[    0.966800]   alloc kstat_irqs on node -1
[    0.966810] ahci 0000:00:1f.2: irq 26 for MSI/MSI-X
[    0.966866] ahci: SSS flag set, parallel bus scan disabled
[    0.966909] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[    0.966914] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ems 
[    0.966920] ahci 0000:00:1f.2: setting latency timer to 64
[    0.988061] scsi0 : ahci
[    0.988150] scsi1 : ahci
[    0.988212] scsi2 : ahci
[    0.988317] scsi3 : ahci
[    0.988384] scsi4 : ahci
[    0.988535] scsi5 : ahci
[    0.988999] ata1: SATA max UDMA/133 abar m2048@0xe4505000 port 0xe4505100 irq 26
[    0.989004] ata2: SATA max UDMA/133 abar m2048@0xe4505000 port 0xe4505180 irq 26
[    0.989007] ata3: DUMMY
[    0.989009] ata4: DUMMY
[    0.989012] ata5: SATA max UDMA/133 abar m2048@0xe4505000 port 0xe4505300 irq 26
[    0.989016] ata6: SATA max UDMA/133 abar m2048@0xe4505000 port 0xe4505380 irq 26
[    0.989973] Fixed MDIO Bus: probed
[    0.990013] PPP generic driver version 2.4.2
[    0.990104] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.990124] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.990137] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.990142] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.990174] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.994079] ehci_hcd 0000:00:1a.7: debug port 1
[    0.994087] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    0.994152] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xe4505c00
[    1.008018] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    1.008106] usb usb1: configuration #1 chosen from 1 choice
[    1.008139] hub 1-0:1.0: USB hub found
[    1.008148] hub 1-0:1.0: 4 ports detected
[    1.008244]   alloc irq_desc for 23 on node -1
[    1.008247]   alloc kstat_irqs on node -1
[    1.008253] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.008265] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.008269] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.008305] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    1.012207] ehci_hcd 0000:00:1d.7: debug port 1
[    1.012215] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    1.012230] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe4505800
[    1.020114] ACPI: Battery Slot [BAT0] (battery present)
[    1.028043] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.028167] usb usb2: configuration #1 chosen from 1 choice
[    1.028198] hub 2-0:1.0: USB hub found
[    1.028206] hub 2-0:1.0: 8 ports detected
[    1.028274] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.028291] uhci_hcd: USB Universal Host Controller Interface driver
[    1.028313]   alloc irq_desc for 16 on node -1
[    1.028315]   alloc kstat_irqs on node -1
[    1.028321] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.028329] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.028333] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.028375] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    1.028413] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000030e0
[    1.028501] usb usb3: configuration #1 chosen from 1 choice
[    1.028569] hub 3-0:1.0: USB hub found
[    1.028577] hub 3-0:1.0: 2 ports detected
[    1.028624]   alloc irq_desc for 21 on node -1
[    1.028627]   alloc kstat_irqs on node -1
[    1.028632] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    1.028640] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    1.028644] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    1.028682] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    1.028719] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000030c0
[    1.028806] usb usb4: configuration #1 chosen from 1 choice
[    1.028837] hub 4-0:1.0: USB hub found
[    1.028844] hub 4-0:1.0: 2 ports detected
[    1.028895] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.028903] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.028907] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.028939] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    1.028969] uhci_hcd 0000:00:1d.0: irq 23, io base 0x000030a0
[    1.029054] usb usb5: configuration #1 chosen from 1 choice
[    1.029084] hub 5-0:1.0: USB hub found
[    1.029092] hub 5-0:1.0: 2 ports detected
[    1.029141] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.029149] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.029153] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.029187] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    1.029216] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003080
[    1.029303] usb usb6: configuration #1 chosen from 1 choice
[    1.029336] hub 6-0:1.0: USB hub found
[    1.029343] hub 6-0:1.0: 2 ports detected
[    1.029393] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    1.029401] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.029405] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.029437] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    1.029467] uhci_hcd 0000:00:1d.2: irq 16, io base 0x00003060
[    1.029559] usb usb7: configuration #1 chosen from 1 choice
[    1.029591] hub 7-0:1.0: USB hub found
[    1.029599] hub 7-0:1.0: 2 ports detected
[    1.029647] uhci_hcd 0000:00:1d.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.029654] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    1.029658] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.029695] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[    1.029733] uhci_hcd 0000:00:1d.3: irq 18, io base 0x00003040
[    1.029827] usb usb8: configuration #1 chosen from 1 choice
[    1.029857] hub 8-0:1.0: USB hub found
[    1.029864] hub 8-0:1.0: 2 ports detected
[    1.029967] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.033719] i8042.c: Detected active multiplexing controller, rev 1.1.
[    1.036068] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.036088] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.036092] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.036095] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.036099] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.036160] mice: PS/2 mouse device common for all mice
[    1.036295] rtc_cmos 00:03: RTC can wake from S4
[    1.036331] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.036366] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.036524] device-mapper: uevent: version 1.0.3
[    1.036616] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    1.036705] device-mapper: multipath: version 1.1.0 loaded
[    1.036708] device-mapper: multipath round-robin: version 1.0.0 loaded
[    1.036963] EISA: Probing bus 0 at eisa.0
[    1.036970] Cannot allocate resource for EISA slot 1
[    1.036972] Cannot allocate resource for EISA slot 2
[    1.036975] Cannot allocate resource for EISA slot 3
[    1.036998] EISA: Detected 0 cards.
[    1.037126] cpuidle: using governor ladder
[    1.037195] cpuidle: using governor menu
[    1.037730] TCP cubic registered
[    1.037919] NET: Registered protocol family 10
[    1.038407] lo: Disabled Privacy Extensions
[    1.038751] NET: Registered protocol family 17
[    1.038770] Bluetooth: L2CAP ver 2.13
[    1.038772] Bluetooth: L2CAP socket layer initialized
[    1.038775] Bluetooth: SCO (Voice Link) ver 0.6
[    1.038777] Bluetooth: SCO socket layer initialized
[    1.038803] Bluetooth: RFCOMM TTY layer initialized
[    1.038806] Bluetooth: RFCOMM socket layer initialized
[    1.038809] Bluetooth: RFCOMM ver 1.11
[    1.039158] Using IPI No-Shortcut mode
[    1.039229] PM: Resume from disk failed.
[    1.039241] registered taskstats version 1
[    1.039370]   Magic number: 6:85:272
[    1.039444] rtc_cmos 00:03: setting system clock to 2010-12-05 09:16:12 UTC (1291540572)
[    1.039448] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.039451] EDD information not available.
[    1.074024] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[    1.312057] ata1: SATA link down (SStatus 0 SControl 300)
[    1.320048] usb 1-2: new high speed USB device using ehci_hcd and address 2
[    1.500030] Clocksource tsc unstable (delta = -423109435 ns)
[    1.542033] usb 1-2: configuration #1 chosen from 1 choice
[    1.656050] usb 2-6: new high speed USB device using ehci_hcd and address 2
[    1.789103] usb 2-6: configuration #1 chosen from 1 choice
[    1.812053] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.812662] ata2.00: ACPI _SDD failed (AE 0x5)
[    7.296106] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    7.296762] ata2.00: ACPI _SDD failed (AE 0x5)
[    7.296764] ata2.00: ACPI: failed the second time, disabled
[    7.344602] ata2.00: ATA-8: TOSHIBA MK2555GSX, FG001J, max UDMA/100
[    7.344607] ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    7.345559] ata2.00: configured for UDMA/100
[    7.360219] scsi 1:0:0:0: Direct-Access     ATA      TOSHIBA MK2555GS FG00 PQ: 0 ANSI: 5
[    7.360349] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    7.360394] sd 1:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    7.360447] sd 1:0:0:0: [sda] Write Protect is off
[    7.360451] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    7.360479] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    7.360618]  sda: sda1 sda2 < sda5 >
[    7.441011] sd 1:0:0:0: [sda] Attached SCSI disk
[    7.680108] ata5: SATA link down (SStatus 0 SControl 300)
[    8.016112] ata6: SATA link down (SStatus 0 SControl 300)
[    8.032113] Freeing unused kernel memory: 544k freed
[    8.032397] Write protecting the kernel text: 4588k
[    8.032435] Write protecting the kernel read-only data: 1840k
[    8.261776] Linux agpgart interface v0.103
[    8.265549] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset
[    8.266324] agpgart-intel 0000:00:00.0: detected 65532K stolen memory
[    8.274359] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    8.274393] r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    8.274480] r8169 0000:02:00.0: setting latency timer to 64
[    8.274624]   alloc irq_desc for 27 on node -1
[    8.274626]   alloc kstat_irqs on node -1
[    8.274665] r8169 0000:02:00.0: irq 27 for MSI/MSI-X
[    8.275353] eth0: RTL8168cp/8111cp at 0xf80ae000, 00:1e:33:1e:dc:94, XID 3cb00080 IRQ 27
[    8.308865] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    8.416801] [drm] Initialized drm 1.1.0 20060810
[    8.432194] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    8.432200] i915 0000:00:02.0: setting latency timer to 64
[    8.434593]   alloc irq_desc for 28 on node -1
[    8.434597]   alloc kstat_irqs on node -1
[    8.434608] i915 0000:00:02.0: irq 28 for MSI/MSI-X
[    8.541819] [drm] i2c_init DPDDC-B
[    8.551618] [drm] i2c_init DPDDC-D
[    8.678242] i2c-adapter i2c-2: unable to read EDID block.
[    8.678247] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[    8.960840] [drm] TV-20: set mode NTSC 480i 0
[    9.088555] [drm] fb0: inteldrmfb frame buffer device
[    9.091438] acpi device:04: registered as cooling_device1
[    9.091776] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/input/input6
[    9.091808] ACPI: Video Device [OVGA] (multi-head: yes  rom: no  post: no)
[    9.091855] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    9.167741] [drm] LVDS-8: set mode 1366x768 1d
[    9.496963] Console: switching to colour frame buffer device 170x48
[    9.975742] PM: Starting manual resume from disk
[    9.975747] PM: Resume from partition 8:5
[    9.975750] PM: Checking hibernation image.
[    9.975865] PM: Resume from disk failed.
[   10.008815] EXT4-fs (sda1): barriers enabled
[   10.027844] kjournald2 starting: pid 386, dev sda1:8, commit interval 5 seconds
[   10.027878] EXT4-fs (sda1): delayed allocation enabled
[   10.027882] EXT4-fs: file extents enabled
[   10.053211] EXT4-fs: mballoc enabled
[   10.053227] EXT4-fs (sda1): mounted filesystem with ordered data mode
[   10.749312] type=1505 audit(1291540582.209:2): operation="profile_load" pid=410 name=/usr/share/gdm/guest-session/Xsession
[   10.751915] type=1505 audit(1291540582.209:3): operation="profile_load" pid=411 name=/sbin/dhclient3
[   10.752965] type=1505 audit(1291540582.212:4): operation="profile_load" pid=411 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[   10.753525] type=1505 audit(1291540582.212:5): operation="profile_load" pid=411 name=/usr/lib/connman/scripts/dhclient-script
[   10.801829] type=1505 audit(1291540582.260:6): operation="profile_load" pid=412 name=/usr/bin/evince
[   10.818394] type=1505 audit(1291540582.276:7): operation="profile_load" pid=412 name=/usr/bin/evince-previewer
[   10.828239] type=1505 audit(1291540582.288:8): operation="profile_load" pid=412 name=/usr/bin/evince-thumbnailer
[   10.875123] type=1505 audit(1291540582.332:9): operation="profile_load" pid=414 name=/usr/lib/cups/backend/cups-pdf
[   10.876346] type=1505 audit(1291540582.336:10): operation="profile_load" pid=414 name=/usr/sbin/cupsd
[   10.893750] type=1505 audit(1291540582.352:11): operation="profile_load" pid=415 name=/usr/sbin/tcpdump
[   20.058495] udev: starting version 147
[   20.082975] Adding 8867840k swap on /dev/sda5.  Priority:-1 extents:1 across:8867840k 
[   20.136491] lp: driver loaded but no devices found
[   20.218959] EXT4-fs (sda1): internal journal on sda1:8
[   20.570890] cfg80211: Calling CRDA to update world regulatory domain
[   20.621287] cfg80211: World regulatory domain updated:
[   20.621291] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   20.621296] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   20.621299] 	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   20.621303] 	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   20.621306] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   20.621310] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   20.834544] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k
[   20.834548] iwlagn: Copyright(c) 2003-2009 Intel Corporation
[   20.834620] iwlagn 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   20.834630] iwlagn 0000:01:00.0: setting latency timer to 64
[   20.834660] iwlagn 0000:01:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
[   20.881387] acer-wmi: Acer Laptop ACPI-WMI Extras
[   20.881664] acer-wmi: Brightness must be controlled by generic video driver
[   20.886851] Linux video capture interface: v2.00
[   20.890878] uvcvideo: Found UVC 1.00 device HD Video WebCam (064e:a133)
[   20.940566] ip_tables: (C) 2000-2006 Netfilter Core Team
[   20.967908] r8169: eth0: link down
[   20.968210] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   20.985943] input: HD Video WebCam as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input7
[   20.986006] usbcore: registered new interface driver uvcvideo
[   20.986010] USB Video Class driver (v0.1.0)
[   21.100547] iwlagn 0000:01:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[   21.100616]   alloc irq_desc for 29 on node -1
[   21.100619]   alloc kstat_irqs on node -1
[   21.100641] iwlagn 0000:01:00.0: irq 29 for MSI/MSI-X
[   21.122530]   alloc irq_desc for 22 on node -1
[   21.122533]   alloc kstat_irqs on node -1
[   21.122542] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   21.122578] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   21.146179] phy0: Selected rate control algorithm 'iwl-agn-rs'
[   21.202029] iwlagn 0000:01:00.0: firmware: requesting iwlwifi-5000-2.ucode
[   21.285167] hda_codec: Unknown model for ALC269, trying auto-probe from BIOS...
[   21.285270] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[   21.300837] type=1505 audit(1291540592.760:12): operation="profile_replace" pid=925 name=/usr/share/gdm/guest-session/Xsession
[   21.303378] iwlagn 0000:01:00.0: loaded firmware version 8.24.2.12
[   21.324076] type=1505 audit(1291540592.784:13): operation="profile_replace" pid=930 name=/sbin/dhclient3
[   21.325112] type=1505 audit(1291540592.784:14): operation="profile_replace" pid=930 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[   21.325674] type=1505 audit(1291540592.784:15): operation="profile_replace" pid=930 name=/usr/lib/connman/scripts/dhclient-script
[   21.382517] type=1505 audit(1291540592.840:16): operation="profile_replace" pid=931 name=/usr/bin/evince
[   21.451911] type=1505 audit(1291540592.908:17): operation="profile_replace" pid=931 name=/usr/bin/evince-previewer
[   21.479703] type=1505 audit(1291540592.936:18): operation="profile_replace" pid=931 name=/usr/bin/evince-thumbnailer
[   21.484304] Registered led device: iwl-phy0::radio
[   21.484328] Registered led device: iwl-phy0::assoc
[   21.484348] Registered led device: iwl-phy0::RX
[   21.484367] Registered led device: iwl-phy0::TX
[   21.507692] type=1505 audit(1291540592.964:19): operation="profile_replace" pid=972 name=/usr/lib/cups/backend/cups-pdf
[   21.508917] type=1505 audit(1291540592.968:20): operation="profile_replace" pid=972 name=/usr/sbin/cupsd
[   21.515567] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   21.546755] type=1505 audit(1291540593.004:21): operation="profile_replace" pid=984 name=/usr/sbin/tcpdump
[   21.904030] usb 3-1: new full speed USB device using uhci_hcd and address 2
[   22.009945] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa44000
[   22.079981] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9
[   22.142863] usb 3-1: configuration #1 chosen from 1 choice
[   22.192504] i2c-adapter i2c-2: unable to read EDID block.
[   22.192511] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[   22.193664] Bluetooth: Generic Bluetooth USB driver ver 0.5
[   22.193794] usbcore: registered new interface driver btusb
[   22.206760] i2c-adapter i2c-2: unable to read EDID block.
[   22.206766] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[   22.252702] [drm] TV-20: set mode NTSC 480i 0
[   22.325289] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   22.325293] Bluetooth: BNEP filters: protocol multicast
[   22.369658] Bridge firewalling registered
[   22.605888] [drm] TV-20: set mode NTSC 480i 0
[   22.884255] i2c-adapter i2c-2: unable to read EDID block.
[   22.884261] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[   22.891374] i2c-adapter i2c-2: unable to read EDID block.
[   22.891379] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[   22.937286] [drm] TV-20: set mode NTSC 480i 0
[   22.965312] ppdev: user-space parallel port driver
[   23.100314] [drm] TV-20: set mode NTSC 480i 0
[   26.216393] i2c-adapter i2c-2: unable to read EDID block.
[   26.216399] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[   26.220930] i2c-adapter i2c-2: unable to read EDID block.
[   26.220934] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[   26.266811] [drm] TV-20: set mode NTSC 480i 0
[   26.432429] [drm] TV-20: set mode NTSC 480i 0
[   26.695534] i2c-adapter i2c-2: unable to read EDID block.
[   26.695539] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[   26.700455] i2c-adapter i2c-2: unable to read EDID block.
[   26.700459] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[   26.746365] [drm] TV-20: set mode NTSC 480i 0
[   26.892541] [drm] TV-20: set mode NTSC 480i 0
[   27.140182] i2c-adapter i2c-2: unable to read EDID block.
[   27.140188] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[   27.144606] i2c-adapter i2c-2: unable to read EDID block.
[   27.144609] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[   27.190491] [drm] TV-20: set mode NTSC 480i 0
[   27.350441] [drm] TV-20: set mode NTSC 480i 0
[   28.727880] i2c-adapter i2c-2: unable to read EDID block.
[   28.727885] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[   28.732776] i2c-adapter i2c-2: unable to read EDID block.
[   28.732780] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[   28.778663] [drm] TV-20: set mode NTSC 480i 0
[   28.922776] [drm] TV-20: set mode NTSC 480i 0
[   49.715585] wlan0: authenticate with AP 00:22:3f:96:2c:27
[   49.719921] wlan0: authenticated
[   49.719926] wlan0: associate with AP 00:22:3f:96:2c:27
[   49.724888] wlan0: RX AssocResp from 00:22:3f:96:2c:27 (capab=0x431 status=0 aid=1)
[   49.724892] wlan0: associated
[   49.729336] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   49.759782] cfg80211: Calling CRDA for country: DE
[   49.762436] cfg80211: Received country IE:
[   49.762440] cfg80211: Regulatory domain: DE
[   49.762443] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   49.762447] 	(2402000 KHz - 2494000 KHz @ 40000 KHz), (10000 mBi, 10000 mBm)
[   49.762449] cfg80211: CRDA thinks this should applied:
[   49.762451] cfg80211: Regulatory domain: DE
[   49.762453] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   49.762456] 	(2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   49.762460] 	(5150000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   49.762463] 	(5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
[   49.762465] cfg80211: We intersect both of these and get:
[   49.762468] cfg80211: Regulatory domain: 98
[   49.762469] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   49.762473] 	(2402000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   49.762478] cfg80211: Leaving channel 5180 MHz intact on phy0 - no rule found in band on Country IE
[   49.762481] cfg80211: Leaving channel 5200 MHz intact on phy0 - no rule found in band on Country IE
[   49.762484] cfg80211: Leaving channel 5220 MHz intact on phy0 - no rule found in band on Country IE
[   49.762487] cfg80211: Leaving channel 5240 MHz intact on phy0 - no rule found in band on Country IE
[   49.762490] cfg80211: Leaving channel 5260 MHz intact on phy0 - no rule found in band on Country IE
[   49.762493] cfg80211: Leaving channel 5280 MHz intact on phy0 - no rule found in band on Country IE
[   49.762496] cfg80211: Leaving channel 5300 MHz intact on phy0 - no rule found in band on Country IE
[   49.762499] cfg80211: Leaving channel 5320 MHz intact on phy0 - no rule found in band on Country IE
[   49.762502] cfg80211: Leaving channel 5500 MHz intact on phy0 - no rule found in band on Country IE
[   49.762505] cfg80211: Leaving channel 5520 MHz intact on phy0 - no rule found in band on Country IE
[   49.762508] cfg80211: Leaving channel 5540 MHz intact on phy0 - no rule found in band on Country IE
[   49.762512] cfg80211: Leaving channel 5560 MHz intact on phy0 - no rule found in band on Country IE
[   49.762515] cfg80211: Leaving channel 5580 MHz intact on phy0 - no rule found in band on Country IE
[   49.762518] cfg80211: Leaving channel 5600 MHz intact on phy0 - no rule found in band on Country IE
[   49.762521] cfg80211: Leaving channel 5620 MHz intact on phy0 - no rule found in band on Country IE
[   49.762524] cfg80211: Leaving channel 5640 MHz intact on phy0 - no rule found in band on Country IE
[   49.762527] cfg80211: Leaving channel 5660 MHz intact on phy0 - no rule found in band on Country IE
[   49.762530] cfg80211: Leaving channel 5680 MHz intact on phy0 - no rule found in band on Country IE
[   49.762532] cfg80211: Leaving channel 5700 MHz intact on phy0 - no rule found in band on Country IE
[   49.762536] cfg80211: Leaving channel 5745 MHz intact on phy0 - no rule found in band on Country IE
[   49.762539] cfg80211: Leaving channel 5765 MHz intact on phy0 - no rule found in band on Country IE
[   49.762542] cfg80211: Leaving channel 5785 MHz intact on phy0 - no rule found in band on Country IE
[   49.762544] cfg80211: Leaving channel 5805 MHz intact on phy0 - no rule found in band on Country IE
[   49.762548] cfg80211: Leaving channel 5825 MHz intact on phy0 - no rule found in band on Country IE
[   49.762555] cfg80211: Current regulatory domain updated by AP to: DE
[   49.762558] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   49.762561] 	(2402000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   49.998646] padlock: VIA PadLock not detected.
[   60.612090] wlan0: no IPv6 routers present
[  108.512296] iwlagn 0000:01:00.0: iwl_tx_agg_start on ra = 00:22:3f:96:2c:27 tid = 0
Avatar utente
pieddu
Tenace Tecnocrate
Tenace Tecnocrate
Messaggi: 13453
Iscrizione: sabato 11 novembre 2006, 21:46
Desktop: Mate XFCE
Distribuzione: Devuan Trisquel
Sesso: Maschile
Località: Serravalle di Chienti (Taverne)

Re: problema serio

Messaggio da pieddu »

Dovrebbe essere questo bug:
https://bugs.launchpad.net/ubuntu/+sour ... bug/487185

Installa la 10.04 o quantomeno prova il live cd e fa la stessa prova spulciando dmesg alla ricerca di questo:

Codice: Seleziona tutto

[   26.216393] i2c-adapter i2c-2: unable to read EDID block.
[   26.216399] i915 0000:00:02.0: HDMI Type A-1: no EDID data
Se non c'è, installala....

PS: cambia titolo, deve essere attinente la discussione.
:birra:
JiraiyaAbura
Prode Principiante
Messaggi: 26
Iscrizione: sabato 4 dicembre 2010, 19:31

Re: kernel panic

Messaggio da JiraiyaAbura »

zanna5 ha scritto: Ovviamente la macchina poi non risponde a nessun comando e devo spegnerla di forza col pulsante.. Sono onesto e so che forse mi attirerò critiche da tanti di voi, pero' windows non mi dava tutti questi problemi..
A dire il vero succede con maggiore frequenza negli OS Microsoft...
Canale youtube:http://www.youtube.com/user/ZabuzaSama1994?feature=mhum
Se mi volete aggiungere su SKYPE:NinoBSD
zanna5
Prode Principiante
Messaggi: 78
Iscrizione: lunedì 23 agosto 2010, 14:15

Re: problema serio

Messaggio da zanna5 »

metto anche risolto..non c'è problema..sei stato gentilissimo per la pazienza e tutto.. volevo solamente chiederti una cosa..
sono un utente medio di pc.. casa,scuola e niente di più..quindi tra un sistema operativo e l'altro non mi cambia la vita.. ora se mettessi nuovamente windows sulla mia macchina, questo errore persisterebbe oppure no!?
ti spiego..è bellissimo ubuntu, ma nel mio contesto sono l'unico che ce l'ha e sono un po' un pesce fuor' d'acqua rispetto a tutti i miei amici che hanno windows..poi non ho un livello alto di conoscenza informatica, e sn sicuro di non poter sfruttare ubuntu al 100%..
finiti gli studi è ovvio che mi metterò a smanettare.. ;)
Per ora mi basta sapere se qst sintomo di kernel panic lo risentirò anche su windows dopo aver formttato il pc..

grazie!
Avatar utente
pieddu
Tenace Tecnocrate
Tenace Tecnocrate
Messaggi: 13453
Iscrizione: sabato 11 novembre 2006, 21:46
Desktop: Mate XFCE
Distribuzione: Devuan Trisquel
Sesso: Maschile
Località: Serravalle di Chienti (Taverne)

Re: kernel panic

Messaggio da pieddu »

Posta l'outup di

Codice: Seleziona tutto

lspci
ho l'impressione che il tuo acer vada molto meglio con ubuntu che non con win.

Per tornare a win è semplicissimo. Cerca nel forum è pieno di ritorni....
:birra:
JiraiyaAbura
Prode Principiante
Messaggi: 26
Iscrizione: sabato 4 dicembre 2010, 19:31

Re: problema serio

Messaggio da JiraiyaAbura »

zanna5 ha scritto: metto anche risolto..non c'è problema..sei stato gentilissimo per la pazienza e tutto.. volevo solamente chiederti una cosa..
sono un utente medio di pc.. casa,scuola e niente di più..quindi tra un sistema operativo e l'altro non mi cambia la vita.. ora se mettessi nuovamente windows sulla mia macchina, questo errore persisterebbe oppure no!?
ti spiego..è bellissimo ubuntu, ma nel mio contesto sono l'unico che ce l'ha e sono un po' un pesce fuor' d'acqua rispetto a tutti i miei amici che hanno windows..poi non ho un livello alto di conoscenza informatica, e sn sicuro di non poter sfruttare ubuntu al 100%..
finiti gli studi è ovvio che mi metterò a smanettare.. ;)
Per ora mi basta sapere se qst sintomo di kernel panic lo risentirò anche su windows dopo aver formttato il pc..

grazie!
Io ubuntu lo utilizzato dalla versione 7 e qualcosa e non mi sono mai sentito pesce fuor' d'acqua anzi caso mai era il contrario ;)
Quindi vai alle superiori, bene pure io ci vado faccio il 3° anno, tu invece???
Canale youtube:http://www.youtube.com/user/ZabuzaSama1994?feature=mhum
Se mi volete aggiungere su SKYPE:NinoBSD
zanna5
Prode Principiante
Messaggi: 78
Iscrizione: lunedì 23 agosto 2010, 14:15

Re: kernel panic

Messaggio da zanna5 »

pieddu ha scritto: Posta l'outup di

Codice: Seleziona tutto

lspci
ho l'impressione che il tuo acer vada molto meglio con ubuntu che non con win.
=) grazie..spero sia vero..

Codice: Seleziona tutto

00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
00:1f.6 Signal processing controller: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem (rev 03)
01:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
comunque sia la 10.4 che la 10.10 hanno provato ad installarmele ma con risultati non buoni..adesso nn ti vorrei annoiare con un'altra discussione, ma purtroppo fidati che la 9.10 era la mia unica salvezza..
zanna5
Prode Principiante
Messaggi: 78
Iscrizione: lunedì 23 agosto 2010, 14:15

Re: problema serio

Messaggio da zanna5 »

JiraiyaAbura ha scritto:
zanna5 ha scritto: metto anche risolto..non c'è problema..sei stato gentilissimo per la pazienza e tutto.. volevo solamente chiederti una cosa..
sono un utente medio di pc.. casa,scuola e niente di più..quindi tra un sistema operativo e l'altro non mi cambia la vita.. ora se mettessi nuovamente windows sulla mia macchina, questo errore persisterebbe oppure no!?
ti spiego..è bellissimo ubuntu, ma nel mio contesto sono l'unico che ce l'ha e sono un po' un pesce fuor' d'acqua rispetto a tutti i miei amici che hanno windows..poi non ho un livello alto di conoscenza informatica, e sn sicuro di non poter sfruttare ubuntu al 100%..
finiti gli studi è ovvio che mi metterò a smanettare.. ;)
Per ora mi basta sapere se qst sintomo di kernel panic lo risentirò anche su windows dopo aver formttato il pc..

grazie!
Io ubuntu lo utilizzato dalla versione 7 e qualcosa e non mi sono mai sentito pesce fuor' d'acqua anzi caso mai era il contrario ;)
Quindi vai alle superiori, bene pure io ci vado faccio il 3° anno, tu invece???
vorrei essere stato così fortunato pure io.. vado in 5 sup.. comunque ho idea che mi hanno fatto qualcosa al pc senza volerlo..correggimi se sbaglio (e scusami se magari dico cazzate)
la prima volta che me l'hanno installato mi hanno messo una usb nel pc spento, acceso il computer, premuto F2 per far si ce il pc leggesse la chiavetta, salvato le impostazioni e dopodiché ubuntu partiva con il menù classico di prova,installa ecc ecc.. tutto perfetto..

qnd sono uscite prima la 10.4 e poi l 10.10 hanno fatto la stessa identica procedura..solo che........................dopo aver salvato non è partito il menù come detto sopra...schermata nera con qualche scritta in bianco che non ricordo e poi una parola per ultima in una riga isolata con scritto boot se non erro e una lineetta che lampeggiava..tipo terminale...nn sta chiedermi cos'era xk ne so meno di niente..se la sono cavata digitando help ed è apparso un menù diverso con cui bisognava premere configurazioni di F# vari e poi è partita in automatico la versione live..
ora..prima di passare a ubuntu ho letto le cose base, e soprattutto dell'installazione..la prima che mi hanno fatto era giusta..ma queste 2 cose che mi hanno fatto sono state fatte bene??

scusate il papiro ma nn posso dire ai miei che devo buttar via 50 euro x farmi rimettere a posto il pc sennò giustamente mi danno del cretino che mi sono fatto smanettare il pc..
Grazie per l'aiuto..
JiraiyaAbura
Prode Principiante
Messaggi: 26
Iscrizione: sabato 4 dicembre 2010, 19:31

Re: problema serio

Messaggio da JiraiyaAbura »

Scusa ma l'installazione non la potevi fare tu, che era meglio????
Fai il quinto liceo oppure vai in un istituto tecnico professionale come me???
Cmq se vuoi Windows telo puoi mettere con molta facilità tu stesso niente di + facile...
Mi sembra strano che ti abbiano fatto qualcosa che non dovevano fare...
Canale youtube:http://www.youtube.com/user/ZabuzaSama1994?feature=mhum
Se mi volete aggiungere su SKYPE:NinoBSD
zanna5
Prode Principiante
Messaggi: 78
Iscrizione: lunedì 23 agosto 2010, 14:15

Re: problema serio

Messaggio da zanna5 »

JiraiyaAbura ha scritto: Scusa ma l'installazione non la potevi fare tu, che era meglio????
Fai il quinto liceo oppure vai in un istituto tecnico professionale come me???
Cmq se vuoi Windows telo puoi mettere con molta facilità tu stesso niente di + facile...
Mi sembra strano che ti abbiano fatto qualcosa che non dovevano fare...
tutti mi dicono che è facile mettere su windows, il problema è che mi hanno fatto 4 dischi di recovery e non saprei poi cosa fare..quindi adesso vedo se la cosa si può sistemare da sola oppure ciao ubuntu.. io cmq non ho mai fatto niente perché non sono un esperto anzi.. 5 liceo scientifico per l'esattezza.. capire un po' di più di computers è solamente una mia piccola ambizione..
Avatar utente
pieddu
Tenace Tecnocrate
Tenace Tecnocrate
Messaggi: 13453
Iscrizione: sabato 11 novembre 2006, 21:46
Desktop: Mate XFCE
Distribuzione: Devuan Trisquel
Sesso: Maschile
Località: Serravalle di Chienti (Taverne)

Re: problema serio

Messaggio da pieddu »

Hai un Dell?

Scarica e masterizza TU la 10.04
Poi provala senza installarla, e fammi sapere come va.
Io dico che non ti darà problemi.....
Poi casomai installiamo.
:birra:
Scrivi risposta

Ritorna a “Applicazioni”

Chi c’è in linea

Visualizzano questa sezione: 0 utenti iscritti e 11 ospiti