[Risolto] Problema con lm-sensors

Installazione, configurazione e uso di programmi e strumenti.
kripton
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 287
Iscrizione: sabato 7 marzo 2009, 23:24
Distribuzione: Ubuntu 14.04

[Risolto] Problema con lm-sensors

Messaggio da kripton »

ragazzi le ventole del mio pc non vengono più rilevate da lm-sensors e non capisco il perchè :-\... con ubuntu 10.04 ero in grado di poterle monitorare , quindi i sensori ci sono, inoltre anche i vari voltaggi sono spariti.Ora l'output di sensors è questo:

acpitz-virtual-0
Adapter: Virtual device
temp1:       +40.0°C  (crit = +75.0°C)                  

k8temp-pci-00c3
Adapter: PCI adapter
Core0 Temp:  +25.0°C                                    
Core1 Temp:  +28.0°C  

è legato alla versione 10.10 di Ubuntu , visto che ora uso questa? grazie per l'aiuto :)
Ultima modifica di kripton il giovedì 6 gennaio 2011, 13:34, modificato 1 volta in totale.
Avatar utente
Alka-Seltzer PLUS
Rampante Reduce
Rampante Reduce
Messaggi: 8887
Iscrizione: venerdì 18 settembre 2009, 13:29
Desktop: Unity + Gnome flashback
Distribuzione: Ubuntu 16.04 & 14.04 64bit

Re: Problema con lm-sensors

Messaggio da Alka-Seltzer PLUS »

Ciao, hai riscannerizzato i sensori ?
| MB: ASUS M3A78 PRO | CPU: AMD Phenom II X4 940 BE | RAM: G-SKILL 8GB 800 MHz | VGA: Sapphire ATI HD 5770 | HD: SSD SAMSUNG 850 EVO + WDC WD10EACS-00DS | Optical drive: NEC SATA AD-7201 Lightscribe | Monitor: ASUS MK221H 22' | Speakers: Majestic HTS 221 | Case: Coolermaster ELITE 335 | Power supply: EVGA SuperNova 550 GS V2 | OS: Ubuntu 16.04 64 bit + Ubuntu Linux 14.04 64bit |
kripton
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 287
Iscrizione: sabato 7 marzo 2009, 23:24
Distribuzione: Ubuntu 14.04

Re: Problema con lm-sensors

Messaggio da kripton »

Ciao :D si ho riprovato e questo è l'output:

Codice: Seleziona tutto

# sensors-detect revision 5818 (2010-01-18 17:22:07 +0100)
# System: HP Pavilion 061 RJ082AA-ABZ t3620.it
# Board: ASUSTek Computer INC. NODUSM3

This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.

Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no): y
Silicon Integrated Systems SIS5595...                       No
VIA VT82C686 Integrated Sensors...                          No
VIA VT8231 Integrated Sensors...                            No
AMD K8 thermal sensors...                                   Success!
    (driver `k8temp')
AMD Family 10h thermal sensors...                           No
AMD Family 11h thermal sensors...                           No
Intel Core family thermal sensor...                         No
Intel Atom thermal sensor...                                No
Intel AMB FB-DIMM thermal sensor...                         No
VIA C7 thermal sensor...                                    No
VIA Nano thermal sensor...                                  No

Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): y
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor'...                   No
Trying family `SMSC'...                                     Yes
Found `SMSC DME1737 Super IO'                               
    (hardware monitoring capabilities accessible via SMBus only)
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor'...                   No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Nuvoton/Fintek'...               No
Trying family `ITE'...                                      No

Some systems (mainly servers) implement IPMI, a set of common interfaces
through which system health data may be retrieved, amongst other things.
We first try to get the information from SMBIOS. If we don't find it
there, we have to read from arbitrary I/O ports to probe for such
interfaces. This is normally safe. Do you want to scan for IPMI
interfaces? (YES/no): y
Probing for `IPMI BMC KCS' at 0xca0...                      No
Probing for `IPMI BMC SMIC' at 0xca8...                     No

Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (yes/NO): y
Probing for `National Semiconductor LM78' at 0x290...       No
Probing for `National Semiconductor LM79' at 0x290...       No
Probing for `Winbond W83781D' at 0x290...                   No
Probing for `Winbond W83782D' at 0x290...                   No

Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no): y
Using driver `i2c-nforce2' for device 0000:00:0a.1: nVidia Corporation nForce SMBus (MCP51)
Module i2c-dev loaded successfully.

Next adapter: SMBus nForce2 adapter at 4c40 (i2c-0)
Do you want to scan it? (YES/no/selectively): y

Next adapter: NVIDIA i2c adapter  (i2c-1)
Do you want to scan it? (YES/no/selectively): y
Client found at address 0x49
Probing for `National Semiconductor LM75'...                No
Probing for `Dallas Semiconductor DS75'...                  No
Probing for `National Semiconductor LM77'...                No
Probing for `Dallas Semiconductor DS1621/DS1631'...         No
Probing for `National Semiconductor LM73'...                No
Probing for `National Semiconductor LM92'...                No
Probing for `National Semiconductor LM76'...                No
Probing for `Maxim MAX6633/MAX6634/MAX6635'...              No
Client found at address 0x50
Probing for `Analog Devices ADM1033'...                     No
Probing for `Analog Devices ADM1034'...                     No
Probing for `SPD EEPROM'...                                 No
Probing for `EDID EEPROM'...                                Yes
    (confidence 8, not a hardware monitoring chip)
Client found at address 0x51
Probing for `Analog Devices ADM1033'...                     No
Probing for `Analog Devices ADM1034'...                     No
Probing for `SPD EEPROM'...                                 No
Client found at address 0x52
Probing for `Analog Devices ADM1033'...                     No
Probing for `Analog Devices ADM1034'...                     No
Probing for `SPD EEPROM'...                                 No
Client found at address 0x53
Probing for `Analog Devices ADM1033'...                     No
Probing for `Analog Devices ADM1034'...                     No
Probing for `SPD EEPROM'...                                 No

Next adapter: NVIDIA i2c adapter  (i2c-2)
Do you want to scan it? (YES/no/selectively): y

Next adapter: NVIDIA i2c adapter  (i2c-3)
Do you want to scan it? (YES/no/selectively): y

Now follows a summary of the probes I have just done.
Just press ENTER to continue: 

Driver `k8temp' (autoloaded):
  * Chip `AMD K8 thermal sensors' (confidence: 9)

No modules to load, skipping modules configuration.

Unloading i2c-dev... OK
 
Ultima modifica di kripton il giovedì 6 gennaio 2011, 13:23, modificato 1 volta in totale.
Avatar utente
Alka-Seltzer PLUS
Rampante Reduce
Rampante Reduce
Messaggi: 8887
Iscrizione: venerdì 18 settembre 2009, 13:29
Desktop: Unity + Gnome flashback
Distribuzione: Ubuntu 16.04 & 14.04 64bit

Re: Problema con lm-sensors

Messaggio da Alka-Seltzer PLUS »

Stai dicendo che dopo 249 messaggi non hai ancora preso l'abitudine di postare l' output del terminale in codice ???

Edita il tuo precedente messaggio e posta anche ( in codice !!! ):

Codice: Seleziona tutto

cat /etc/modules
| MB: ASUS M3A78 PRO | CPU: AMD Phenom II X4 940 BE | RAM: G-SKILL 8GB 800 MHz | VGA: Sapphire ATI HD 5770 | HD: SSD SAMSUNG 850 EVO + WDC WD10EACS-00DS | Optical drive: NEC SATA AD-7201 Lightscribe | Monitor: ASUS MK221H 22' | Speakers: Majestic HTS 221 | Case: Coolermaster ELITE 335 | Power supply: EVGA SuperNova 550 GS V2 | OS: Ubuntu 16.04 64 bit + Ubuntu Linux 14.04 64bit |
kripton
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 287
Iscrizione: sabato 7 marzo 2009, 23:24
Distribuzione: Ubuntu 14.04

Re: Problema con lm-sensors

Messaggio da kripton »

ragazzi ho risolto come mostrato in questa guida : http://www.webupd8.org/2009/10/make-lm-sensors-work-in-ubuntu-karmic.html ciao!
Ultima modifica di kripton il giovedì 6 gennaio 2011, 13:34, modificato 1 volta in totale.
Scrivi risposta

Ritorna a “Applicazioni”

Chi c’è in linea

Visualizzano questa sezione: Bing [Bot] e 7 ospiti