forzare check drive

Installazione, configurazione e uso di programmi e strumenti.
Scrivi risposta
Avatar utente
francok
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1797
Iscrizione: domenica 18 gennaio 2009, 9:41
Desktop: Gnome 46
Distribuzione: Ubuntu 24.04 LTS

forzare check drive

Messaggio da francok »

Come devo fare  a forzare il check drive?(ubuntu 10.04) non lo ha fatto mai
Dispositivo Boot      Start        End      Blocks  Id  System
/dev/sda1  *          1        6538    52516453+  7  HPFS/NTFS
/dev/sda2            6539      13411    55207372+  83  Linux
/dev/sda3          13412      19324    47496172+  83  Linux
/dev/sda4          19325      19457    1068322+  82  Linux swap / Solaris
Ubuntu 24.04 LTS G46
Avatar utente
A.Milinux
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 2032
Iscrizione: domenica 31 maggio 2009, 18:27
Desktop: Gnome Shell
Distribuzione: Ubuntu 20.04 LTS
Sesso: Maschile
Località: Catania

Re: forzare check drive

Messaggio da A.Milinux »

Se intendi il check che ubuntu esegue ogni toot di avvii,...
...fai partire il live cd di ubuntu.
Apri il terminale e dai il comando:

Codice: Seleziona tutto

sudo fsck /dev/sdx
dove /dev/sdx è il disco che viene controllato in fase di avvio.
Se ad ogni sasso, dovessimo dare un calcio, a fine giornata, ci ritireremmo con il piede rotto!
Avatar utente
francok
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1797
Iscrizione: domenica 18 gennaio 2009, 9:41
Desktop: Gnome 46
Distribuzione: Ubuntu 24.04 LTS

Re: forzare check drive

Messaggio da francok »

A.Milinux ha scritto: Se intendi il check che ubuntu esegue ogni toot di avvii,...
...fai partire il live cd di ubuntu.
Apri il terminale e dai il comando:

Codice: Seleziona tutto

sudo fsck /dev/sdx
dove /dev/sdx è il disco che viene controllato in fase di avvio.
grazie ma quale devo mettere " /dev/sdx" la home che è 2  o / che è 3
Ubuntu 24.04 LTS G46
Avatar utente
A.Milinux
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 2032
Iscrizione: domenica 31 maggio 2009, 18:27
Desktop: Gnome Shell
Distribuzione: Ubuntu 20.04 LTS
Sesso: Maschile
Località: Catania

Re: forzare check drive

Messaggio da A.Milinux »

Quella di root se è la sda3,...
...si!
Se ad ogni sasso, dovessimo dare un calcio, a fine giornata, ci ritireremmo con il piede rotto!
Avatar utente
francok
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1797
Iscrizione: domenica 18 gennaio 2009, 9:41
Desktop: Gnome 46
Distribuzione: Ubuntu 24.04 LTS

Re: forzare check drive

Messaggio da francok »

ok ora provo
grazie
Ubuntu 24.04 LTS G46
Avatar utente
francok
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1797
Iscrizione: domenica 18 gennaio 2009, 9:41
Desktop: Gnome 46
Distribuzione: Ubuntu 24.04 LTS

Re: forzare check drive

Messaggio da francok »

Ho dato il comando da live
ubuntu@ubuntu:~$ sudo fsck /dev/sda3
fsck from util-linux-ng 2.17.2
e2fsck 1.41.11 (14-Mar-2010)
/dev/sda3: clean, 196853/2973696 files, 1219245/11874043 blocks

All'avvio non ha fatti il check
Ubuntu 24.04 LTS G46
Avatar utente
A.Milinux
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 2032
Iscrizione: domenica 31 maggio 2009, 18:27
Desktop: Gnome Shell
Distribuzione: Ubuntu 20.04 LTS
Sesso: Maschile
Località: Catania

Re: forzare check drive

Messaggio da A.Milinux »

Per effettuare il check all'avvio, dai il comando:

Codice: Seleziona tutto

sudo touch /forcefsck
creando il file vuoto forcefsck in /
....al riavvio il sistema vede quel file ed esegue il check del disco.
Fatto ciò il file viene eliminato.

Prova!
Se ad ogni sasso, dovessimo dare un calcio, a fine giornata, ci ritireremmo con il piede rotto!
Avatar utente
francok
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1797
Iscrizione: domenica 18 gennaio 2009, 9:41
Desktop: Gnome 46
Distribuzione: Ubuntu 24.04 LTS

Re: forzare check drive

Messaggio da francok »

A.Milinux ha scritto: Per effettuare il check all'avvio, dai il comando:

Codice: Seleziona tutto

sudo touch /forcefsck
creando il file vuoto forcefsck in /
....al riavvio il sistema vede quel file ed esegue il check del disco.
Fatto ciò il file viene eliminato.

Prova!
Devo dare quel comando per creare il file,ma devo farlo da live cd?
Ubuntu 24.04 LTS G46
Avatar utente
A.Milinux
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 2032
Iscrizione: domenica 31 maggio 2009, 18:27
Desktop: Gnome Shell
Distribuzione: Ubuntu 20.04 LTS
Sesso: Maschile
Località: Catania

Re: forzare check drive

Messaggio da A.Milinux »

francok ha scritto:
A.Milinux ha scritto: Per effettuare il check all'avvio, dai il comando:

Codice: Seleziona tutto

sudo touch /forcefsck
creando il file vuoto forcefsck in /
....al riavvio il sistema vede quel file ed esegue il check del disco.
Fatto ciò il file viene eliminato.

Prova!
Devo dare quel comando per creare il file,ma devo farlo da live cd?
No!
Dal sistema interessato.
Quindi dal tuo ubuntu.
Se ad ogni sasso, dovessimo dare un calcio, a fine giornata, ci ritireremmo con il piede rotto!
Avatar utente
francok
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1797
Iscrizione: domenica 18 gennaio 2009, 9:41
Desktop: Gnome 46
Distribuzione: Ubuntu 24.04 LTS

Re: forzare check drive

Messaggio da francok »

NoN lo ha fatto lo stesso,ho intravisto un messaggio all'avvio riguardo un file o partizione non contigue.
Poi ho riavviato e non c'era più il messaggio (non contiguo)

Ma non sarà perchè c'è anche windows nelle partizioni?
Se così lo levo subito,tanto è ridotto un catorcio,senza antivirus niente driver per la scheda di rete.
Lo uso ogni tanto per giocare,perciò ho fatto in modo che non possa collegarsi ad internet
Allegati
Schermata--dev-sda - GParted.png
Ultima modifica di Anonymous il lunedì 10 gennaio 2011, 17:38, modificato 1 volta in totale.
Ubuntu 24.04 LTS G46
Avatar utente
A.Milinux
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 2032
Iscrizione: domenica 31 maggio 2009, 18:27
Desktop: Gnome Shell
Distribuzione: Ubuntu 20.04 LTS
Sesso: Maschile
Località: Catania

Re: forzare check drive

Messaggio da A.Milinux »

Ridai il comando ed al riavvio scegli la modalità di ripristino/recovery.
...prova cosi!
Se ad ogni sasso, dovessimo dare un calcio, a fine giornata, ci ritireremmo con il piede rotto!
Avatar utente
francok
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1797
Iscrizione: domenica 18 gennaio 2009, 9:41
Desktop: Gnome 46
Distribuzione: Ubuntu 24.04 LTS

Re: forzare check drive

Messaggio da francok »

A.Milinux ha scritto: Ridai il comando ed al riavvio scegli la modalità di ripristino/recovery.
...prova cosi!
Lo stesso di prima,in più ho scoperto che il tasto per le maiuscole non funziona quando devo mettere la password e fare il login da recovery mode per avviarlo normalmente.
Di solito io uso l'accesso automatico,ma questo è un'altra storia  ::)
Ubuntu 24.04 LTS G46
Avatar utente
francok
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1797
Iscrizione: domenica 18 gennaio 2009, 9:41
Desktop: Gnome 46
Distribuzione: Ubuntu 24.04 LTS

Re: forzare check drive

Messaggio da francok »

up
Ubuntu 24.04 LTS G46
Avatar utente
francok
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1797
Iscrizione: domenica 18 gennaio 2009, 9:41
Desktop: Gnome 46
Distribuzione: Ubuntu 24.04 LTS

Re: forzare check drive

Messaggio da francok »

Ho provato smartctl
Ma non ci capisco nulla,ci sono problemi ?

Codice: Seleziona tutto

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		 ( 430) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 (  54) minutes.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   118   099   006    Pre-fail  Always       -       175783281
  3 Spin_Up_Time            0x0003   097   097   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   097   097   020    Old_age   Always       -       3082
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   083   060   030    Pre-fail  Always       -       225205030
  9 Power_On_Hours          0x0032   088   088   000    Old_age   Always       -       10686
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   097   097   020    Old_age   Always       -       3079
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   068   053   045    Old_age   Always       -       32 (Lifetime Min/Max 20/32)
194 Temperature_Celsius     0x0022   032   047   000    Old_age   Always       -       32 (0 14 0 0)
195 Hardware_ECC_Recovered  0x001a   079   069   000    Old_age   Always       -       47507750
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0000   100   253   000    Old_age   Offline      -       0
202 TA_Increase_Count       0x0032   100   253   000    Old_age   Always       -       0

SMART Error Log Version: 1
ATA Error Count: 4
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 4 occurred at disk power-on lifetime: 7745 hours (322 days + 17 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  10 51 08 68 96 a1 e0  Error: IDNF 8 sectors at LBA = 0x00a19668 = 10589800

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 68 96 a1 e0 00      01:00:20.696  READ DMA EXT
  25 00 08 60 96 a1 e0 00      01:00:20.698  READ DMA EXT
  25 00 08 58 96 a1 e0 00      01:00:20.698  READ DMA EXT
  25 00 06 52 96 a1 e0 00      01:00:20.698  READ DMA EXT
  25 00 02 50 96 a1 e0 00      01:00:20.698  READ DMA EXT

Error 3 occurred at disk power-on lifetime: 7745 hours (322 days + 17 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  10 51 08 68 96 a1 e0  Error: IDNF 8 sectors at LBA = 0x00a19668 = 10589800

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 68 96 a1 e0 00      01:00:12.820  READ DMA EXT
  25 00 01 00 00 00 e0 00      01:00:12.820  READ DMA EXT
  25 00 08 50 30 00 e0 00      01:00:12.820  READ DMA EXT
  25 00 08 50 20 00 e0 00      01:00:12.820  READ DMA EXT
  25 00 03 e5 70 a2 e0 00      01:00:12.850  READ DMA EXT

Error 2 occurred at disk power-on lifetime: 7745 hours (322 days + 17 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  10 51 08 68 96 a1 e0  Error: IDNF 8 sectors at LBA = 0x00a19668 = 10589800

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 68 96 a1 e0 00      01:00:12.119  READ DMA EXT
  25 00 08 60 96 a1 e0 00      01:00:12.119  READ DMA EXT
  25 00 08 58 96 a1 e0 00      01:00:12.121  READ DMA EXT
  25 00 06 52 96 a1 e0 00      01:00:12.121  READ DMA EXT
  25 00 02 50 96 a1 e0 00      01:00:12.121  READ DMA EXT

Error 1 occurred at disk power-on lifetime: 7745 hours (322 days + 17 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  10 51 08 68 96 a1 e0  Error: IDNF 8 sectors at LBA = 0x00a19668 = 10589800

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 68 96 a1 e0 00      00:59:52.213  READ DMA EXT
  25 00 08 60 96 a1 e0 00      00:59:52.212  READ DMA EXT
  25 00 08 58 96 a1 e0 00      00:59:52.212  READ DMA EXT
  25 00 06 52 96 a1 e0 00      00:59:52.212  READ DMA EXT
  25 00 02 50 96 a1 e0 00      00:59:52.212  READ DMA EXT

SMART Self-test log structure revision number 1

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Ubuntu 24.04 LTS G46
dadexix86
Tenace Tecnocrate
Tenace Tecnocrate
Messaggi: 16364
Iscrizione: domenica 22 marzo 2009, 19:58
Desktop: Unity
Distribuzione: Ubuntu 18.04 x86_64
Località: Paris, France

Re: forzare check drive

Messaggio da dadexix86 »

Se vuoi fare un fdisk essendo sicuro di non avere problemi, accedi da live e senza montare i dischi dai

Codice: Seleziona tutto

sudo fdisk -l
per avere la tabella delle partizioni.
Poi cerchi quelli in ext (o altri formati supportati, ad esempio NON NTFS o FAT) e dai

Codice: Seleziona tutto

sudo fsck -fv /dev/sdXY
Per vedere tra quanto verrà automaticamente controllato il filesystem, invece, dai

Codice: Seleziona tutto

$ sudo dumpe2fs -h /dev/sda3
Non si dà supporto tramite mp in forum
L'utilizzo del tasto [Code] quando scrivi in forum risolve i 2/3 dei tuoi problemi
Per problemi con Skype rivolgersi qui. | Un Matematico Migrante
Avatar utente
francok
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1797
Iscrizione: domenica 18 gennaio 2009, 9:41
Desktop: Gnome 46
Distribuzione: Ubuntu 24.04 LTS

Re: forzare check drive

Messaggio da francok »

Ho avviato da cd live e dato i tre comandi come hai detto tu:

il primo è allegato ,il secondo è nel link,il terzo lo copio qui

http://upload.centerzone.it/viewer.php? ... 089477.png
(secondo comando)

terzo

Codice: Seleziona tutto

ubuntu@ubuntu:~$ sudo fsck -fv /dev/sdXY
fsck from util-linux-ng 2.17.2
e2fsck 1.41.11 (14-Mar-2010)
fsck.ext2: No such file or directory while trying to open /dev/sdXY

The superblock could not be read or does not describe a correct ext2
filesystem.  If the device is valid and it really contains an ext2
filesystem (and not swap or ufs or something else), then the superblock
is corrupt, and you might try running e2fsck with an alternate superblock:
    e2fsck -b 8193 <device>

ubuntu@ubuntu:~$ sudo dumpe2fs -h /dev/sda3
dumpe2fs 1.41.11 (14-Mar-2010)
Filesystem volume name:   <none>
Last mounted on:          /
Filesystem UUID:          3726c9d6-c0ae-4a20-bfab-6e0f1fe9a135
Filesystem magic number:  0xEF53
Filesystem revision #:    1 (dynamic)
Filesystem features:      has_journal ext_attr resize_inode dir_index filetype extent flex_bg sparse_super large_file huge_file uninit_bg dir_nlink extra_isize
Filesystem flags:         signed_directory_hash 
Default mount options:    (none)
Filesystem state:         clean
Errors behavior:          Continue
Filesystem OS type:       Linux
Inode count:              2973696
Block count:              11874043
Reserved block count:     593702
Free blocks:              10657074
Free inodes:              2775762
First block:              0
Block size:               4096
Fragment size:            4096
Reserved GDT blocks:      1021
Blocks per group:         32768
Fragments per group:      32768
Inodes per group:         8192
Inode blocks per group:   512
Flex block group size:    16
Filesystem created:       Tue Oct 12 15:16:39 2010
Last mount time:          Sun Jan 16 12:33:09 2011
Last write time:          Sun Jan 16 10:25:02 2011
Mount count:              2
Maximum mount count:      25
Last checked:             Sun Jan 16 10:25:02 2011
Check interval:           15552000 (6 months)
Next check after:         Fri Jul 15 10:25:02 2011
Lifetime writes:          68 GB
Reserved blocks uid:      0 (user root)
Reserved blocks gid:      0 (group root)
First inode:              11
Inode size:	          256
Required extra isize:     28
Desired extra isize:      28
Journal inode:            8
Default directory hash:   half_md4
Directory Hash Seed:      6737f9bb-0af0-46e8-ab4e-7a2edf4cb697
Journal backup:           inode blocks
Journal features:         journal_incompat_revoke
Journal size:             128M
Journal length:           32768
Journal sequence:         0x00037843
Journal start:            0

ubuntu@ubuntu:~$ 
Allegati
1.png
Ubuntu 24.04 LTS G46
dadexix86
Tenace Tecnocrate
Tenace Tecnocrate
Messaggi: 16364
Iscrizione: domenica 22 marzo 2009, 19:58
Desktop: Unity
Distribuzione: Ubuntu 18.04 x86_64
Località: Paris, France

Re: forzare check drive

Messaggio da dadexix86 »

-.- al posto di XY devi metterci i parametri che ti interessano! ( ad esempio a3 )
Non si dà supporto tramite mp in forum
L'utilizzo del tasto [Code] quando scrivi in forum risolve i 2/3 dei tuoi problemi
Per problemi con Skype rivolgersi qui. | Un Matematico Migrante
Avatar utente
francok
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1797
Iscrizione: domenica 18 gennaio 2009, 9:41
Desktop: Gnome 46
Distribuzione: Ubuntu 24.04 LTS

Re: forzare check drive

Messaggio da francok »

non lo avevo capito ora rirpovo  >:(
ecco,

Codice: Seleziona tutto

ubuntu@ubuntu:~$ sudo fsck -fv /dev/sda3
fsck from util-linux-ng 2.17.2
e2fsck 1.41.11 (14-Mar-2010)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information

/dev/sda3: ***** FILE SYSTEM WAS MODIFIED *****

  197936 inodes used (6.66%)
     361 non-contiguous files (0.2%)
     252 non-contiguous directories (0.1%)
         # of inodes with ind/dind/tind blocks: 0/0/0
         Extent depth histogram: 176376/39
 1217150 blocks used (10.25%)
       0 bad blocks
       1 large file

  151786 regular files
   22893 directories
       4 character device files
       1 block device file
       0 fifos
     408 links
   23212 symbolic links (21475 fast symbolic links)
      31 sockets
--------
  198335 files

Codice: Seleziona tutto

ubuntu@ubuntu:~$ sudo fdisk -l

Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xe4d9e4d9

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *           1        6538    52516453+   7  HPFS/NTFS
/dev/sda2            6539       13411    55207372+  83  Linux
/dev/sda3           13412       19324    47496172+  83  Linux
/dev/sda4           19325       19457     1068322+  82  Linux swap / Solaris
ubuntu@ubuntu:~$ sudo fsck -fv /dev/sda3
fsck from util-linux-ng 2.17.2
e2fsck 1.41.11 (14-Mar-2010)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information

  197936 inodes used (6.66%)
     361 non-contiguous files (0.2%)
     252 non-contiguous directories (0.1%)
         # of inodes with ind/dind/tind blocks: 0/0/0
         Extent depth histogram: 176376/39
 1217150 blocks used (10.25%)
       0 bad blocks
       1 large file

  151786 regular files
   22893 directories
       4 character device files
       1 block device file
       0 fifos
     408 links
   23212 symbolic links (21475 fast symbolic links)
      31 sockets
--------
  198335 files






ubuntu@ubuntu:~$ sudo dumpe2fs -h /dev/sda3
dumpe2fs 1.41.11 (14-Mar-2010)
Filesystem volume name:   <none>
Last mounted on:          /
Filesystem UUID:          3726c9d6-c0ae-4a20-bfab-6e0f1fe9a135
Filesystem magic number:  0xEF53
Filesystem revision #:    1 (dynamic)
Filesystem features:      has_journal ext_attr resize_inode dir_index filetype extent flex_bg sparse_super large_file huge_file uninit_bg dir_nlink extra_isize
Filesystem flags:         signed_directory_hash 
Default mount options:    (none)
Filesystem state:         clean
Errors behavior:          Continue
Filesystem OS type:       Linux
Inode count:              2973696
Block count:              11874043
Reserved block count:     593702
Free blocks:              10656893
Free inodes:              2775760
First block:              0
Block size:               4096
Fragment size:            4096
Reserved GDT blocks:      1021
Blocks per group:         32768
Fragments per group:      32768
Inodes per group:         8192
Inode blocks per group:   512
Flex block group size:    16
Filesystem created:       Tue Oct 12 15:16:39 2010
Last mount time:          Sun Jan 16 13:44:11 2011
Last write time:          Sun Jan 16 15:55:59 2011
Mount count:              0
Maximum mount count:      25
Last checked:             Sun Jan 16 15:55:59 2011
Check interval:           15552000 (6 months)
Next check after:         Fri Jul 15 15:55:59 2011
Lifetime writes:          68 GB
Reserved blocks uid:      0 (user root)
Reserved blocks gid:      0 (group root)
First inode:              11
Inode size:	          256
Required extra isize:     28
Desired extra isize:      28
Journal inode:            8
Default directory hash:   half_md4
Directory Hash Seed:      6737f9bb-0af0-46e8-ab4e-7a2edf4cb697
Journal backup:           inode blocks
Journal features:         journal_incompat_revoke
Journal size:             128M
Journal length:           32768
Journal sequence:         0x00037a48
Journal start:            0 

Ultima modifica di Anonymous il domenica 16 gennaio 2011, 17:08, modificato 1 volta in totale.
Ubuntu 24.04 LTS G46
Avatar utente
francok
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1797
Iscrizione: domenica 18 gennaio 2009, 9:41
Desktop: Gnome 46
Distribuzione: Ubuntu 24.04 LTS

Re: forzare check drive

Messaggio da francok »

Adesso ho disinstallato windows,mi serviva spazio nel disco ed ora la situazione è  questa:
Dispositivo Boot      Start         End      Blocks   Id  System
/dev/sda2               1       13411   107723826   83  Linux           /home
/dev/sda3           13412       19324    47496172+  83  Linux /
/dev/sda4           19325       19457     1068322+  82  Linux swap / Solaris

Ho dato   "sudo touch /forcefsck"
Ma non ha fatto il check all'avvio
/ e home sopra in rosso le ho messe io

Non so se questo può essere utile:
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
#            
proc            /proc           proc    nodev,noexec,nosuid 0       0
# / was on /dev/sda3 during installation
UUID=3726c9d6-c0ae-4a20-bfab-6e0f1fe9a135 /               ext4    errors=remount-ro 0       1
# /home was on /dev/sda2 during installation
UUID=98b9b0e8-94a3-483e-b368-b823aa4fccbc /home           ext4    defaults        0       2
# swap was on /dev/sda4 during installation
UUID=e6a4802f-8ca8-4342-a4a1-27696f18af58 none            swap    sw              0       0
#/dev/fd0        /media/floppy0  auto    rw,user,noauto,exec,utf8 0       0
Ultima modifica di Anonymous il sabato 22 gennaio 2011, 5:55, modificato 1 volta in totale.
Ubuntu 24.04 LTS G46
Scrivi risposta

Ritorna a “Applicazioni”

Chi c’è in linea

Visualizzano questa sezione: Bing [Bot], Google [Bot] e 8 ospiti