[Driver] ath5k

[DaVinci]

Ciao, spero che qualcuno possa aiutarmi a risolvere il mio problema. Vengono subito al dunque... Ho una scheda atheros ar242x con driver ath5k, adesso mi trovo installato con altro driver di conseguenza la mia scheda non funziona, o per lo meno funziona solo collegata all' eternet. Spero che qualcuno di voi mi spieghi la procedura completa x l'installazione dei driver ath5k. Grazie in anticipo a tutti... ::)

[fungus]

Ciao allora se stai parlando dei drivers wireless forse ti posso aiutare...
In giro x internet ho trovato qsto...

http://elubuntu.blogspot.com/2009/02/in ... eless.html

spero che ti possa aiutare ciaoooo

[jerico]

il driver ath5k è già presente nel kernel (almeno dovrebbe). postami questo

Codice: Seleziona tutto

lsmod

[DaVinci]

ciao il risultato a questo comando è: Module                  Size  Used by
binfmt_misc            6587  1
ppdev                  5259  0
snd_hda_codec_realtek  203310  1
fbcon                  35102  71
tileblit                2031  1 fbcon
font                    7557  1 fbcon
bitblit                4707  1 fbcon
softcursor              1189  1 bitblit
snd_hda_intel          21941  2
vga16fb                11385  0
vgastate                8961  1 vga16fb
snd_hda_codec          74201  2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep              5412  1 snd_hda_codec
joydev                  8708  0
snd_pcm_oss            35308  0
snd_mixer_oss          13746  1 snd_pcm_oss
snd_pcm                70662  3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_dummy          1338  0
snd_seq_oss            26726  0
snd_seq_midi            4557  0
snd_rawmidi            19056  1 snd_seq_midi
arc4                    1153  2
snd_seq_midi_event      6003  2 snd_seq_oss,snd_seq_midi
snd_seq                47263  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer              19098  2 snd_pcm,snd_seq
snd_seq_device          5700  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
ath5k                121792  0
snd                    54148  16 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
i915                  285076  3
mac80211              205146  1 ath5k
uvcvideo              56990  0
intel_agp              24119  2 i915
drm_kms_helper        29297  1 i915
ath                    7611  1 ath5k
acer_wmi              13861  0
soundcore              6620  1 snd
videodev              34361  1 uvcvideo
v4l1_compat            13251  2 uvcvideo,videodev
drm                  162377  4 i915,drm_kms_helper
i2c_algo_bit            5028  1 i915
psmouse                63245  0
serio_raw              3978  0
cfg80211              126517  3 ath5k,mac80211,ath
led_class              2864  2 ath5k,acer_wmi
snd_page_alloc          7076  2 snd_hda_intel,snd_pcm
agpgart                31724  2 intel_agp,drm
video                  17375  1 i915
output                  1871  1 video
lp                      7028  0
parport                32635  2 ppdev,lp
ahci                  32200  2
atl1e                  28018  0
ring0@ring0:~$

[jerico]

come vedi c è. postami l'ultimo terzo di questo comando ( mi interessa la parte "ethernet")

Codice: Seleziona tutto

lspci -vvv

e anche

Codice: Seleziona tutto

sudo lshw -C network

[DaVinci]

Codice: Seleziona tutto

ring0@ring0:~$ lspci -vvv
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
	Subsystem: Acer Incorporated [ALI] Device 022c
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: agpgart-intel
	Kernel modules: intel-agp

00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
	Subsystem: Acer Incorporated [ALI] Device 022c
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at 56380000 (32-bit, non-prefetchable) [size=512K]
	Region 1: I/O ports at 50f0 [size=8]
	Region 2: Memory at 40000000 (32-bit, prefetchable) [size=256M]
	Region 3: Memory at 56400000 (32-bit, non-prefetchable) [size=256K]
	Capabilities: <access denied>
	Kernel driver in use: i915
	Kernel modules: i915

00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
	Subsystem: Acer Incorporated [ALI] Device 022c
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Region 0: Memory at 56300000 (32-bit, non-prefetchable) [size=512K]
	Capabilities: <access denied>

00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)
	Subsystem: Acer Incorporated [ALI] Device 022c
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at 56440000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: HDA Intel
	Kernel modules: snd-hda-intel

00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02)
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 00003000-00004fff
	Memory behind bridge: 55200000-562fffff
	Prefetchable memory behind bridge: 0000000050000000-0000000050ffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 02)
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: 54100000-551fffff
	Prefetchable memory behind bridge: 0000000051000000-0000000051ffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1c.3 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 4 (rev 02)
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	I/O behind bridge: 00001000-00001fff
	Memory behind bridge: 53000000-540fffff
	Prefetchable memory behind bridge: 0000000052000000-0000000052ffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1d.0 USB Controller: Intel Corporation N10/ICH7 Family USB UHCI Controller #1 (rev 02)
	Subsystem: Acer Incorporated [ALI] Device 022c
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 4: I/O ports at 50a0 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02)
	Subsystem: Acer Incorporated [ALI] Device 022c
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 17
	Region 4: I/O ports at 5080 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02)
	Subsystem: Acer Incorporated [ALI] Device 022c
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 4: I/O ports at 5060 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02)
	Subsystem: Acer Incorporated [ALI] Device 022c
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin D routed to IRQ 19
	Region 4: I/O ports at 5040 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02) (prog-if 20)
	Subsystem: Acer Incorporated [ALI] Device 022c
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at 56444400 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) (prog-if 01)
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
	I/O behind bridge: 0000f000-00000fff
	Memory behind bridge: fff00000-000fffff
	Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
	Subsystem: Acer Incorporated [ALI] Device 022c
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel modules: iTCO_wdt, intel-rng

00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02) (prog-if 8a [Master SecP PriP])
	Subsystem: Acer Incorporated [ALI] Device 022c
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: I/O ports at 01f0 [size=8]
	Region 1: I/O ports at 03f4 [size=1]
	Region 2: I/O ports at 0170 [size=8]
	Region 3: I/O ports at 0374 [size=1]
	Region 4: I/O ports at 50c0 [size=16]
	Kernel driver in use: ata_piix

00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller (rev 02) (prog-if 01)
	Subsystem: Acer Incorporated [ALI] Device 022c
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 27
	Region 0: I/O ports at 50d8 [size=8]
	Region 1: I/O ports at 50fc [size=4]
	Region 2: I/O ports at 50d0 [size=8]
	Region 3: I/O ports at 50f8 [size=4]
	Region 4: I/O ports at 5020 [size=16]
	Region 5: Memory at 56444000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ahci
	Kernel modules: ahci

00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02)
	Subsystem: Acer Incorporated [ALI] Device 022c
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin B routed to IRQ 11
	Region 4: I/O ports at 5000 [size=32]
	Kernel modules: i2c-i801

01:00.0 Ethernet controller: Atheros Communications Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller (rev b0)
	Subsystem: Acer Incorporated [ALI] Device 022c
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 28
	Region 0: Memory at 55200000 (64-bit, non-prefetchable) [size=256K]
	Region 2: I/O ports at 3000 [size=128]
	Capabilities: <access denied>
	Kernel driver in use: ATL1E
	Kernel modules: atl1e

02:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
	Subsystem: Foxconn International, Inc. Device e00d
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at 54100000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: ath5k
	Kernel modules: ath5k

ring0@ring0:~$ 

INVECE CON IL COMANDO  sudo lshw -C network:

*-network               
       description: Ethernet interface
       product: Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller
       vendor: Atheros Communications
       physical id: 0
       bus info: pci@0000:01:00.0
       logical name: eth0
       version: b0
       serial: 00:23:8b:9d:8f:3b
       size: 100MB/s
       capacity: 100MB/s
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=ATL1E driverversion=1.0.0.7-NAPI duplex=full firmware=L1e ip=192.168.1.2 latency=0 link=yes multicast=yes port=twisted pair speed=100MB/s
       resources: irq:28 memory:55200000-5523ffff ioport:3000(size=128)
  *-network DISABLED
       description: Wireless interface
       product: AR5001 Wireless Network Adapter
       vendor: Atheros Communications Inc.
       physical id: 0
       bus info: pci@0000:02:00.0
       logical name: wlan0
       version: 01
       serial: 00:24:2b:e2:23:68
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress msix bus_master cap_list ethernet physical wireless
       configuration: broadcast=yes driver=ath5k latency=0 multicast=yes wireless=IEEE 802.11bg
       resources: irq:18 memory:54100000-5410ffff

edit dello staff: ricordiamoci i tags code, prima di postare paginate del genere

[jerico]

il driver é riconosciuto e correttamente utilizzato.
Dov'é il problema?

[DaVinci]

Ciao Jeric, il problema sta nel fatto che forse non sono attivi, lanciando alcuni comandi ricevo una lista di dati con il nome dei driver ath5k scritti in rosso. Verificando ho visto che sono installati gli atl1, ma non so come disabilitarli ed utilizzare gli ath5k.

[jerico]

ma li hai installati tu? è il driver atl1e? dai questo

Codice: Seleziona tutto

sudo rmmod atl1e

Codice: Seleziona tutto

sudo modprobe ath5k 

e vedi se funziona

[DaVinci]

No, non funziona !!! Ti posto i comandi iwconfig e ifconfig.


iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

wlan0    IEEE 802.11bg  ESSID:off/any 
          Mode:Managed  Access Point: Not-Associated  Tx-Power=20 dBm 
          Retry  long limit:7  RTS thr:off  Fragment thr:off
          Power Management:off

ifconfig
eth0      Link encap:Ethernet  HWaddr 00:23:8b:9d:8f:3b 
          indirizzo inet:192.168.1.2  Bcast:192.168.1.255  Maschera:255.255.255.0
          indirizzo inet6: fe80::223:8bff:fe9d:8f3b/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:263 errors:0 dropped:0 overruns:0 frame:0
          TX packets:324 errors:0 dropped:0 overruns:0 carrier:2
          collisioni:0 txqueuelen:1000
          Byte RX:127217 (127.2 KB)  Byte TX:48190 (48.1 KB)
          Interrupt:28

lo        Link encap:Loopback locale 
          indirizzo inet:127.0.0.1  Maschera:255.0.0.0
          indirizzo inet6: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:8 errors:0 dropped:0 overruns:0 frame:0
          TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
          collisioni:0 txqueuelen:0
          Byte RX:480 (480.0 B)  Byte TX:480 (480.0 B)

[jerico]

ora sono sul pc della mia morosa che ha seven  (bad) e non ricordo a memoria... postami

Codice: Seleziona tutto

ls /etc/modprobe.d/

p.s.
tra poco devo staccare perchè mi sta addosso  :'(

[DaVinci]

ls /etc/modprobe.d/
alsa-base.conf          blacklist-firewire.conf    blacklist-oss.conf
blacklist-ath_pci.conf  blacklist-framebuffer.conf  blacklist-watchdog.conf
blacklist.conf          blacklist-modem.conf        libpisock9.conf
la lista  blacklist-oss.conf è di colore azzurro.

[DaVinci]

questa è la lista della voce che compare di color azzurro, cioè la lista blacklist-oss.conf:


blacklist ac97
blacklist ac97_codec
blacklist ac97_plugin_ad1980
blacklist ad1848
blacklist ad1889
blacklist adlib_card
blacklist aedsp16
blacklist ali5455
blacklist btaudio
blacklist cmpci
blacklist cs4232
blacklist cs4281
blacklist cs461x
blacklist cs46xx
blacklist emu10k1
blacklist es1370
blacklist es1371
blacklist esssolo1
blacklist forte
blacklist gus
blacklist i810_audio
blacklist kahlua
blacklist mad16
blacklist maestro
blacklist maestro3
blacklist maui
blacklist mpu401
blacklist nm256_audio
blacklist opl3
blacklist opl3sa
blacklist opl3sa2
blacklist pas2
blacklist pss
blacklist rme96xx
blacklist sb
blacklist sb_lib

[jerico]

inserisci nel blacklist.conf il modulo eth1e
blacklist eth1e
,salva il file e riavvia