mi da' errore perchè il sito non esiste più!hg clone http://mcentral.de/hg/~mrec/em28xx-new pinnacle
Che fare??rm -rf Module.symvers;
make -C /lib/modules/`if [ -d /lib/modules/2.6.21.4-eeepc ]; then echo 2.6.21.4-eeepc; else uname -r; fi`/build SUBDIRS=`pwd` modules
make[1]: ingresso nella directory "/usr/src/linux-headers-2.6.35-24-generic"
CC [M] /home/donato/em28xx-new/em2880-dvb.o
In file included from /home/donato/em28xx-new/em2880-dvb.c:37:
/home/donato/em28xx-new/em28xx.h:523: error: expected specifier-qualifier-list before ‘IR_KEYTAB_TYPE’
/home/donato/em28xx-new/em28xx.h:622: error: expected specifier-qualifier-list before ‘IR_KEYTAB_TYPE’
/home/donato/em28xx-new/em2880-dvb.c: In function ‘em2880_stop_stream’:
/home/donato/em28xx-new/em2880-dvb.c:250: error: implicit declaration of function ‘usb_buffer_free’
/home/donato/em28xx-new/em2880-dvb.c: In function ‘em2880_start_stream’:
/home/donato/em28xx-new/em2880-dvb.c:290: error: implicit declaration of function ‘usb_buffer_alloc’
/home/donato/em28xx-new/em2880-dvb.c:291: warning: assignment makes pointer from integer without a cast
/home/donato/em28xx-new/em2880-dvb.c: In function ‘mt352_pinnacle_init’:
/home/donato/em28xx-new/em2880-dvb.c:444: warning: missing initializer
/home/donato/em28xx-new/em2880-dvb.c:444: warning: (near initialization for ‘zlconf[23].reg’)
make[2]: *** [/home/donato/em28xx-new/em2880-dvb.o] Errore 1
make[1]: *** [_module_/home/donato/em28xx-new] Errore 2
make[1]: uscita dalla directory "/usr/src/linux-headers-2.6.35-24-generic"
make: *** [default] Errore 2
puoi dargli un'occhiata?[ 0.504589] pci 0000:00:05.0: bridge window [io disabled]
[ 0.504589] pci 0000:00:05.0: bridge window [mem 0xd1200000-0xd12fffff]
[ 0.504589] pci 0000:00:05.0: bridge window [mem pref disabled]
[ 0.504589] pci 0000:09:00.0: BAR 6: assigned [mem 0xd1010000-0xd101ffff pref]
[ 0.504589] pci 0000:00:06.0: PCI bridge to [bus 09-09]
[ 0.504589] pci 0000:00:06.0: bridge window [io 0x2000-0x2fff]
[ 0.504589] pci 0000:00:06.0: bridge window [mem 0xd2500000-0xd25fffff]
[ 0.504589] pci 0000:00:06.0: bridge window [mem 0xd1000000-0xd10fffff 64bit pref]
[ 0.504589] pci 0000:00:0a.0: PCI bridge to [bus 0a-0a]
[ 0.504589] pci 0000:00:0a.0: bridge window [io disabled]
[ 0.504589] pci 0000:00:0a.0: bridge window [mem 0xd1100000-0xd11fffff]
[ 0.504589] pci 0000:00:0a.0: bridge window [mem pref disabled]
[ 0.504589] pci 0000:00:14.4: PCI bridge to [bus 80-8f]
[ 0.504589] pci 0000:00:14.4: bridge window [io 0x1000-0x1fff]
[ 0.504589] pci 0000:00:14.4: bridge window [mem disabled]
[ 0.504589] pci 0000:00:14.4: bridge window [mem pref disabled]
[ 0.504589] alloc irq_desc for 18 on node -1
[ 0.504589] alloc kstat_irqs on node -1
[ 0.504589] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.504589] pci 0000:00:02.0: setting latency timer to 64
[ 0.504589] alloc irq_desc for 16 on node -1
[ 0.504589] alloc kstat_irqs on node -1
[ 0.504589] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.504589] pci 0000:00:04.0: setting latency timer to 64
[ 0.504589] alloc irq_desc for 17 on node -1
[ 0.504589] alloc kstat_irqs on node -1
[ 0.504589] pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.504589] pci 0000:00:05.0: setting latency timer to 64
[ 0.504589] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.504589] pci 0000:00:06.0: setting latency timer to 64
[ 0.504589] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.504589] pci 0000:00:0a.0: setting latency timer to 64
[ 0.504589] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.504589] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.504589] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.504589] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.504589] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.504589] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.504589] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[ 0.504589] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[ 0.504589] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[ 0.504589] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[ 0.504589] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[ 0.504589] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
[ 0.504589] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
[ 0.504589] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
[ 0.504589] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
[ 0.504589] pci_bus 0000:00: resource 19 [mem 0xc0000000-0xdfffffff]
[ 0.504589] pci_bus 0000:00: resource 20 [mem 0xe4000000-0xffffffff]
[ 0.504589] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
[ 0.504589] pci_bus 0000:01: resource 1 [mem 0xd2300000-0xd23fffff]
[ 0.504589] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.504589] pci_bus 0000:02: resource 0 [io 0x3000-0x4fff]
[ 0.504589] pci_bus 0000:02: resource 1 [mem 0xd1300000-0xd22fffff]
[ 0.504589] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd0ffffff 64bit pref]
[ 0.504589] pci_bus 0000:08: resource 1 [mem 0xd1200000-0xd12fffff]
[ 0.504589] pci_bus 0000:09: resource 0 [io 0x2000-0x2fff]
[ 0.504589] pci_bus 0000:09: resource 1 [mem 0xd2500000-0xd25fffff]
[ 0.504589] pci_bus 0000:09: resource 2 [mem 0xd1000000-0xd10fffff 64bit pref]
[ 0.504589] pci_bus 0000:0a: resource 1 [mem 0xd1100000-0xd11fffff]
[ 0.504589] pci_bus 0000:80: resource 0 [io 0x1000-0x1fff]
[ 0.504589] pci_bus 0000:80: resource 4 [io 0x0000-0x0cf7]
[ 0.504589] pci_bus 0000:80: resource 5 [io 0x0d00-0xffff]
[ 0.504589] pci_bus 0000:80: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.504589] pci_bus 0000:80: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.504589] pci_bus 0000:80: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.504589] pci_bus 0000:80: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.504589] pci_bus 0000:80: resource 10 [mem 0x000cc000-0x000cffff]
[ 0.504589] pci_bus 0000:80: resource 11 [mem 0x000d0000-0x000d3fff]
[ 0.504589] pci_bus 0000:80: resource 12 [mem 0x000d4000-0x000d7fff]
[ 0.504589] pci_bus 0000:80: resource 13 [mem 0x000d8000-0x000dbfff]
[ 0.504589] pci_bus 0000:80: resource 14 [mem 0x000dc000-0x000dffff]
[ 0.504589] pci_bus 0000:80: resource 15 [mem 0x000e0000-0x000e3fff]
[ 0.504589] pci_bus 0000:80: resource 16 [mem 0x000e4000-0x000e7fff]
[ 0.504589] pci_bus 0000:80: resource 17 [mem 0x000e8000-0x000ebfff]
[ 0.504589] pci_bus 0000:80: resource 18 [mem 0x000ec000-0x000effff]
[ 0.504589] pci_bus 0000:80: resource 19 [mem 0xc0000000-0xdfffffff]
[ 0.504589] pci_bus 0000:80: resource 20 [mem 0xe4000000-0xffffffff]
[ 0.504589] NET: Registered protocol family 2
[ 0.504589] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.506602] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.511258] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.511258] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.511258] TCP reno registered
[ 0.511258] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.511258] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.511258] NET: Registered protocol family 1
[ 0.671438] pci 0000:01:00.0: Boot video device
[ 0.671474] PCI: CLS 64 bytes, default 64
[ 0.671481] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.671487] Placing 64MB software IO TLB between ffff880001f9e000 - ffff880005f9e000
[ 0.671493] software IO TLB at phys 0x1f9e000 - 0x5f9e000
[ 0.671676] Simple Boot Flag at 0x44 set to 0x1
[ 0.672107] Scanning for low memory corruption every 60 seconds
[ 0.672501] audit: initializing netlink socket (disabled)
[ 0.672532] type=2000 audit(1296501933.670:1): initialized
[ 0.691296] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.691296] VFS: Disk quotas dquot_6.5.2
[ 0.691296] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.691296] fuse init (API version 7.14)
[ 0.691296] msgmni has been set to 7898
[ 0.691296] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.691296] io scheduler noop registered
[ 0.691296] io scheduler deadline registered
[ 0.691296] io scheduler cfq registered (default)
[ 0.691296] pcieport 0000:00:02.0: setting latency timer to 64
[ 0.691296] alloc irq_desc for 40 on node -1
[ 0.691296] alloc kstat_irqs on node -1
[ 0.691296] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 0.691296] pcieport 0000:00:04.0: setting latency timer to 64
[ 0.691296] alloc irq_desc for 41 on node -1
[ 0.691296] alloc kstat_irqs on node -1
[ 0.691296] pcieport 0000:00:04.0: irq 41 for MSI/MSI-X
[ 0.691296] pcieport 0000:00:05.0: setting latency timer to 64
[ 0.691296] alloc irq_desc for 42 on node -1
[ 0.691296] alloc kstat_irqs on node -1
[ 0.691296] pcieport 0000:00:05.0: irq 42 for MSI/MSI-X
[ 0.691296] pcieport 0000:00:06.0: setting latency timer to 64
[ 0.691296] alloc irq_desc for 43 on node -1
[ 0.691296] alloc kstat_irqs on node -1
[ 0.691296] pcieport 0000:00:06.0: irq 43 for MSI/MSI-X
[ 0.691296] pcieport 0000:00:0a.0: setting latency timer to 64
[ 0.691296] alloc irq_desc for 44 on node -1
[ 0.691296] alloc kstat_irqs on node -1
[ 0.691296] pcieport 0000:00:0a.0: irq 44 for MSI/MSI-X
[ 0.691296] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.691296] \_SB_.PCI0:_OSC request failed
[ 0.691296] _OSC request data:1 0 1f
[ 0.691296] \_SB_.PCI0:_OSC request failed
[ 0.691296] _OSC request data:1 0 1f
[ 0.691296] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.691500] ACPI: AC Adapter [ACAD] (on-line)
[ 0.691642] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.691656] ACPI: Power Button [PWRB]
[ 0.691756] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.691764] ACPI: Sleep Button [SLPB]
[ 0.691892] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 0.692071] ACPI: Lid Switch [LID]
[ 0.692099] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.692106] ACPI: Power Button [PWRF]
[ 0.692945] ACPI: acpi_idle registered with cpuidle
[ 0.698820] [Firmware Bug]: Invalid critical threshold (0)
[ 0.699624] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.699624] ACPI: Thermal Zone [THRM] (68 C)
[ 0.699833] ERST: Table is not found!
[ 0.700626] Linux agpgart interface v0.103
[ 0.700693] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.703229] brd: module loaded
[ 0.703315] loop: module loaded
[ 0.704000] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.704168] pata_acpi 0000:00:14.1: setting latency timer to 64
[ 0.704873] Fixed MDIO Bus: probed
[ 0.704953] PPP generic driver version 2.4.2
[ 0.705040] tun: Universal TUN/TAP device driver, 1.6
[ 0.705044] tun: (C) 1999-2004 Max Krasnyansky
[ 0.705224] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.705333] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.705412] ehci_hcd 0000:00:12.2: setting latency timer to 64
[ 0.705420] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 0.705501] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 0.705655] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
[ 0.705688] ehci_hcd 0000:00:12.2: debug port 1
[ 0.705753] ehci_hcd 0000:00:12.2: irq 17, io mem 0xd2408500
[ 0.706072] ACPI: Battery Slot [BAT0] (battery absent)
[ 0.721356] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 0.721671] hub 1-0:1.0: USB hub found
[ 0.721684] hub 1-0:1.0: 6 ports detected
[ 0.722014] alloc irq_desc for 19 on node -1
[ 0.722019] alloc kstat_irqs on node -1
[ 0.722037] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.722076] ehci_hcd 0000:00:13.2: setting latency timer to 64
[ 0.722084] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 0.722197] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 0.722323] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
[ 0.722356] ehci_hcd 0000:00:13.2: debug port 1
[ 0.722411] ehci_hcd 0000:00:13.2: irq 19, io mem 0xd2408400
[ 0.741309] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 0.741534] hub 2-0:1.0: USB hub found
[ 0.741547] hub 2-0:1.0: 6 ports detected
[ 0.741798] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.741900] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.741930] ohci_hcd 0000:00:12.0: setting latency timer to 64
[ 0.741938] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 0.742019] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 0.742151] ohci_hcd 0000:00:12.0: irq 16, io mem 0xd2407000
[ 0.809555] hub 3-0:1.0: USB hub found
[ 0.809637] hub 3-0:1.0: 3 ports detected
[ 0.809788] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.809815] ohci_hcd 0000:00:12.1: setting latency timer to 64
[ 0.809823] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 0.809900] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 0.810015] ohci_hcd 0000:00:12.1: irq 16, io mem 0xd2406000
[ 0.869532] hub 4-0:1.0: USB hub found
[ 0.869613] hub 4-0:1.0: 3 ports detected
[ 0.869770] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.869798] ohci_hcd 0000:00:13.0: setting latency timer to 64
[ 0.869806] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 0.869891] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 0.870015] ohci_hcd 0000:00:13.0: irq 18, io mem 0xd2405000
[ 0.929574] hub 5-0:1.0: USB hub found
[ 0.929655] hub 5-0:1.0: 3 ports detected
[ 0.929807] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.929835] ohci_hcd 0000:00:13.1: setting latency timer to 64
[ 0.929843] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 0.929926] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 0.930034] ohci_hcd 0000:00:13.1: irq 18, io mem 0xd2404000
[ 0.989637] hub 6-0:1.0: USB hub found
[ 0.989719] hub 6-0:1.0: 3 ports detected
[ 0.989887] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.990182] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.012291] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.012291] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.012291] mice: PS/2 mouse device common for all mice
[ 1.010024] Freeing initrd memory: 10752k freed
[ 1.012291] rtc_cmos 00:05: RTC can wake from S4
[ 1.012291] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.012291] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[ 1.012291] device-mapper: uevent: version 1.0.3
[ 1.012291] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 1.012291] device-mapper: multipath: version 1.1.1 loaded
[ 1.012291] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.012291] cpuidle: using governor ladder
[ 1.012291] cpuidle: using governor menu
[ 1.012291] TCP cubic registered
[ 1.012291] NET: Registered protocol family 10
[ 1.012291] lo: Disabled Privacy Extensions
[ 1.012693] NET: Registered protocol family 17
[ 1.012794] powernow-k8: Found 1 AMD Athlon(tm) X2 Dual-Core QL-65 (2 cpu cores) (version 2.20.00)
[ 1.012929] powernow-k8: 0 : pstate 0 (2100 MHz)
[ 1.012934] powernow-k8: 1 : pstate 1 (1050 MHz)
[ 1.021252] PM: Resume from disk failed.
[ 1.021283] registered taskstats version 1
[ 1.021951] Magic number: 11:688:446
[ 1.021951] rtc_cmos 00:05: setting system clock to 2011-01-31 19:25:34 UTC (1296501934)
[ 1.021951] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.021951] EDD information not available.
[ 1.022037] Freeing unused kernel memory: 908k freed
[ 1.022809] Write protecting the kernel read-only data: 10240k
[ 1.023189] Freeing unused kernel memory: 412k freed
[ 1.024022] Freeing unused kernel memory: 1644k freed
[ 1.030471] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.046628] usb 1-3: new high speed USB device using ehci_hcd and address 2
[ 1.052471] udev[75]: starting version 163
[ 1.130486] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.130553] r8169 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.130750] r8169 0000:09:00.0: setting latency timer to 64
[ 1.130834] alloc irq_desc for 45 on node -1
[ 1.130839] alloc kstat_irqs on node -1
[ 1.130873] r8169 0000:09:00.0: irq 45 for MSI/MSI-X
[ 1.217681] scsi0 : pata_atiixp
[ 1.232483] r8169 0000:09:00.0: eth0: RTL8168d/8111d at 0xffffc900050aa000, 00:23:8b:e6:c6:e7, XID 081000c0 IRQ 45
[ 1.284419] scsi1 : pata_atiixp
[ 1.287353] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6000 irq 14
[ 1.287360] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6008 irq 15
[ 1.291288] ahci 0000:00:11.0: version 3.0
[ 1.291288] alloc irq_desc for 22 on node -1
[ 1.291288] alloc kstat_irqs on node -1
[ 1.291288] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.291288] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[ 1.291288] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 1.291288] scsi2 : ahci
[ 1.291288] scsi3 : ahci
[ 1.291288] scsi4 : ahci
[ 1.291288] ata3: SATA max UDMA/133 abar m1024@0xd2408000 port 0xd2408100 irq 22
[ 1.291288] ata4: SATA max UDMA/133 abar m1024@0xd2408000 port 0xd2408180 irq 22
[ 1.291288] ata5: SATA max UDMA/133 abar m1024@0xd2408000 port 0xd2408200 irq 22
[ 1.630201] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.830082] ata4: softreset failed (device not ready)
[ 1.830091] ata4: applying SB600 PMP SRST workaround and retrying
[ 1.830124] ata3: softreset failed (device not ready)
[ 1.830131] ata3: applying SB600 PMP SRST workaround and retrying
[ 2.030129] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.030180] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.032709] ata3.00: ATA-8: WDC WD5000BEVT-60ZAT1, 02.01A02, max UDMA/100
[ 2.032717] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.035488] ata3.00: configured for UDMA/100
[ 2.049187] ata4.00: ATAPI: TSSTcorp CDDVDW TS-L633M, 0200, max UDMA/100
[ 2.051615] scsi 2:0:0:0: Direct-Access ATA WDC WD5000BEVT-6 02.0 PQ: 0 ANSI: 5
[ 2.051976] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.052054] sd 2:0:0:0: [sda] Write Protect is off
[ 2.052054] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.052054] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.052395] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 2.052749] sda:
[ 2.068887] ata4.00: configured for UDMA/100
[ 2.085525] sda1 sda2 sda3
[ 2.118804] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.635440] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 14.949536] udev[367]: starting version 163
[ 14.991266] Adding 7772156k swap on /dev/sda5. Priority:-1 extents:1 across:7772156k
[ 15.070045] lp: driver loaded but no devices found
[ 15.071298] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SMBI [io 0x0b00-0x0b0f pref disabled]
[ 15.071298] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 15.398853] lirc_dev: IR Remote Control driver registered, major 251
[ 15.398853] lirc_ene0100: module is from the staging directory, the quality is unknown, you have been warned.
[ 15.399390] enecir 00:0b: lirc_dev: driver enecir registered at minor = 0
[ 15.399520] enecir: unknown ENE chip detected, assuming KB3926D
[ 15.399523] enecir: driver support incomplete
[ 15.399528] enecir: chip is 0x3926 - 0x00, 0xd2
[ 15.399543] enecir: hardware features:
[ 15.399547] enecir: learning and tx off, gpio40_learn off, fan_in off
[ 15.399550] enecir: driver has been succesfully loaded
[ 15.432376] EDAC MC: Ver: 2.1.0 Dec 2 2010
[ 15.450047] cfg80211: Calling CRDA to update world regulatory domain
[ 15.450416] Linux video capture interface: v2.00
[ 15.451300] uvcvideo: Found UVC 1.00 device HP Webcam (5986:0180)
[ 15.451300] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[ 15.461262] input: HP Webcam as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/input/input5
[ 15.461262] usbcore: registered new interface driver uvcvideo
[ 15.461262] USB Video Class driver (v0.1.0)
[ 15.468960] type=1400 audit(1296498348.939:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=644 comm="apparmor_parser"
[ 15.469563] type=1400 audit(1296498348.939:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=644 comm="apparmor_parser"
[ 15.469897] type=1400 audit(1296498348.939:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=644 comm="apparmor_parser"
[ 15.471297] EDAC amd64_edac: Ver: 3.3.0 Dec 2 2010
[ 15.471297] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
[ 15.471297] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 15.471297] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 15.471297] (Note that use of the override may cause unknown side effects.)
[ 15.471297] amd64_edac: probe of 0000:00:18.2 failed with error -22
[ 15.470928] lis3lv02d: laptop model unknown, using default axes configuration
[ 15.473032] type=1400 audit(1296498348.949:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=604 comm="apparmor_parser"
[ 15.473637] type=1400 audit(1296498348.949:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=604 comm="apparmor_parser"
[ 15.473978] type=1400 audit(1296498348.949:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=604 comm="apparmor_parser"
[ 15.476436] lis3lv02d: 8 bits sensor found
[ 15.491268] input: HP WMI hotkeys as /devices/virtual/input/input6
[ 15.521298] [drm] Initialized drm 1.1.0 20060810
[ 15.521694] acpi device:09: registered as cooling_device2
[ 15.523011] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:06/LNXVIDEO:01/input/input7
[ 15.523232] ACPI: Video Device [DVGA] (multi-head: yes rom: no post: no)
[ 15.561299] cfg80211: World regulatory domain updated:
[ 15.561299] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 15.561299] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 15.561299] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 15.561299] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 15.561299] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 15.561299] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 15.561597] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input8
[ 15.561915] Registered led device: hp::hddprotect
[ 15.561963] lis3lv02d driver loaded.
[ 15.731298] [drm] radeon defaulting to kernel modesetting.
[ 15.731298] [drm] radeon kernel modesetting enabled.
[ 15.731298] radeon 0000:01:00.0: power state changed by ACPI to D0
[ 15.731298] radeon 0000:01:00.0: power state changed by ACPI to D0
[ 15.731298] radeon 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 15.731298] radeon 0000:01:00.0: setting latency timer to 64
[ 15.733959] [drm] initializing kernel modesetting (RV710 0x1002:0x9553).
[ 15.734470] ath9k 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 15.734470] ath9k 0000:08:00.0: setting latency timer to 64
[ 15.806924] [drm] register mmio base: 0xD2300000
[ 15.806924] [drm] register mmio size: 65536
[ 15.808008] ATOM BIOS: BR33731
[ 15.808062] [drm] Clocks initialized !
[ 15.808116] radeon 0000:01:00.0: VRAM: 512M 0x00000000 - 0x1FFFFFFF (512M used)
[ 15.808123] radeon 0000:01:00.0: GTT: 512M 0x20000000 - 0x3FFFFFFF
[ 15.808640] [drm] Detected VRAM RAM=512M, BAR=256M
[ 15.808652] [drm] RAM width 64bits DDR
[ 15.824790] ath: EEPROM regdomain: 0x6a
[ 15.824799] ath: EEPROM indicates we should expect a direct regpair map
[ 15.824809] ath: Country alpha2 being used: 00
[ 15.824813] ath: Regpair used: 0x6a
[ 15.840227] [TTM] Zone kernel: Available graphics memory: 2028786 kiB.
[ 15.840236] [TTM] Initializing pool allocator.
[ 15.840293] [drm] radeon: 512M of VRAM memory ready
[ 15.840297] [drm] radeon: 512M of GTT memory ready.
[ 15.840426] alloc irq_desc for 46 on node -1
[ 15.840431] alloc kstat_irqs on node -1
[ 15.840463] radeon 0000:01:00.0: irq 46 for MSI/MSI-X
[ 15.840479] radeon 0000:01:00.0: radeon: using MSI.
[ 15.840569] [drm] radeon: irq initialized.
[ 15.840577] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 15.841301] [drm] Loading RV710 Microcode
[ 15.855165] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 15.855381] HDA Intel 0000:00:14.2: setting latency timer to 64
[ 15.861298] phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 15.861298] Registered led device: ath9k-phy0::radio
[ 15.861298] Registered led device: ath9k-phy0::assoc
[ 15.861298] Registered led device: ath9k-phy0::tx
[ 15.861298] Registered led device: ath9k-phy0::rx
[ 15.861298] phy0: Atheros AR9285 Rev:2 mem=0xffffc90005360000, irq=17
[ 15.916505] [drm] ring test succeeded in 1 usecs
[ 15.916916] [drm] radeon: ib pool ready.
[ 15.917177] [drm] ib test succeeded in 0 usecs
[ 15.917183] [drm] Enabling audio support
[ 15.918530] [drm] Default TV standard: NTSC
[ 15.920038] [drm] Radeon Display Connectors
[ 15.920038] [drm] Connector 0:
[ 15.920038] [drm] LVDS
[ 15.920038] [drm] DDC: 0x7f68 0x7f68 0x7f6c 0x7f6c 0x7f70 0x7f70 0x7f74 0x7f74
[ 15.920038] [drm] Encoders:
[ 15.920038] [drm] LCD1: INTERNAL_UNIPHY2
[ 15.920038] [drm] Connector 1:
[ 15.920038] [drm] VGA
[ 15.920038] [drm] DDC: 0x7fa0 0x7fa0 0x7fa4 0x7fa4 0x7fa8 0x7fa8 0x7fac 0x7fac
[ 15.920038] [drm] Encoders:
[ 15.920038] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 15.920038] [drm] Connector 2:
[ 15.920038] [drm] HDMI-A
[ 15.920038] [drm] HPD1
[ 15.920038] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 15.920038] [drm] Encoders:
[ 15.920038] [drm] DFP1: INTERNAL_UNIPHY
[ 15.985108] [drm] radeon: power management initialized
[ 16.052363] input: HDA ATI SB Mic at Ext Front Jack as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 16.052591] input: HDA ATI SB Line Out at Ext Front Jack as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 16.130758] [drm] fb mappable at 0xC0142000
[ 16.130758] [drm] vram apper at 0xC0000000
[ 16.130758] [drm] size 4325376
[ 16.130758] [drm] fb depth is 24
[ 16.130758] [drm] pitch is 5632
[ 16.165953] type=1400 audit(1296498349.629:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=940 comm="apparmor_parser"
[ 16.163517] type=1400 audit(1296498349.639:9): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=939 comm="apparmor_parser"
[ 16.165953] type=1400 audit(1296498349.639:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=940 comm="apparmor_parser"
[ 16.165953] type=1400 audit(1296498349.639:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=940 comm="apparmor_parser"
[ 16.274786] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 16.316001] r8169 0000:09:00.0: eth0: link down
[ 16.316034] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.414113] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04751/0xa00000/0x0
[ 16.492997] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11
[ 17.910058] Console: switching to colour frame buffer device 170x48
[ 17.911304] fb0: radeondrmfb frame buffer device
[ 17.911308] drm: registered panic notifier
[ 17.911316] Slow work thread pool: Starting up
[ 17.911474] Slow work thread pool: Ready
[ 17.911490] [drm] Initialized radeon 2.5.0 20080528 for 0000:01:00.0 on minor 0
[ 17.912459] HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 17.912459] alloc irq_desc for 47 on node -1
[ 17.912459] alloc kstat_irqs on node -1
[ 17.912459] HDA Intel 0000:01:00.1: irq 47 for MSI/MSI-X
[ 17.912459] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 18.190050] ppdev: user-space parallel port driver
[ 18.970648] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,commit=0
[ 20.141295] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 20.451366] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,commit=0
[ 26.882742] wlan0: authenticate with 00:0c:f6:51:ba:c7 (try 1)
[ 26.890031] wlan0: authenticated
[ 26.914883] wlan0: associate with 00:0c:f6:51:ba:c7 (try 1)
[ 26.921267] wlan0: RX AssocResp from 00:0c:f6:51:ba:c7 (capab=0x411 status=0 aid=1)
[ 26.921267] wlan0: associated
[ 26.931265] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 26.951262] cfg80211: Calling CRDA for country: US
[ 26.990016] Intel AES-NI instructions are not detected.
[ 27.001263] cfg80211: Received country IE:
[ 27.001263] cfg80211: Regulatory domain: US
[ 27.001263] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 27.001263] (2402000 KHz - 2472000 KHz @ 40000 KHz), (10000 mBi, 1600 mBm)
[ 27.001263] cfg80211: CRDA thinks this should applied:
[ 27.001263] cfg80211: Regulatory domain: US
[ 27.001263] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 27.001263] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 27.001263] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 27.001263] (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 27.001263] (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 27.001263] (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 27.001263] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 27.001263] cfg80211: We intersect both of these and get:
[ 27.001263] cfg80211: Regulatory domain: 98
[ 27.001263] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 27.001263] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 1600 mBm)
[ 27.001263] cfg80211: Current regulatory domain updated by AP to: US
[ 27.001263] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 27.001263] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 1600 mBm)
[ 27.023050] padlock: VIA PadLock not detected.
[ 37.660043] wlan0: no IPv6 routers present
[ 48.480287] usb 1-1: new high speed USB device using ehci_hcd and address 3
[ 48.692792] 3:2:1: endpoint lacks sample rate attribute bit, cannot set.
[ 48.692792] 3:2:2: endpoint lacks sample rate attribute bit, cannot set.
[ 48.692792] 3:2:3: endpoint lacks sample rate attribute bit, cannot set.
[ 48.692792] 3:2:4: endpoint lacks sample rate attribute bit, cannot set.
[ 48.692792] 3:2:5: endpoint lacks sample rate attribute bit, cannot set.
[ 48.695168] usbcore: registered new interface driver snd-usb-audio
[ 48.831301] 3:2:2: endpoint lacks sample rate attribute bit, cannot set.
[ 48.834274] 3:2:2: endpoint lacks sample rate attribute bit, cannot set.
[ 76.941999] usb 1-1: USB disconnect, address 3
[ 79.251341] usb 1-1: new high speed USB device using ehci_hcd and address 4
[ 79.490057] em28xx v4l2 driver version 0.0.1 loaded
[ 79.490057] em28xx: new video device (eb1a:2870): interface 0, class 255
[ 79.490057] em28xx: device is attached to a USB 2.0 bus
[ 79.490057] em28xx #0: Alternate settings: 8
[ 79.490057] em28xx #0: Alternate setting 0, max size= 0
[ 79.490057] em28xx #0: Alternate setting 1, max size= 0
[ 79.490057] em28xx #0: Alternate setting 2, max size= 1448
[ 79.490057] em28xx #0: Alternate setting 3, max size= 2048
[ 79.490057] em28xx #0: Alternate setting 4, max size= 2304
[ 79.490057] em28xx #0: Alternate setting 5, max size= 2580
[ 79.490057] em28xx #0: Alternate setting 6, max size= 2892
[ 79.490057] em28xx #0: Alternate setting 7, max size= 3072
[ 79.911262] input: em2880/em2870 remote control as /devices/virtual/input/input12
[ 79.911262] em28xx-input.c: remote control handler attached
[ 79.911262] em28xx #0: Found Pinnacle PCTV DVB-T
[ 79.911262] usbcore: registered new interface driver em28xx
[ 80.010519] em2880-dvb.c: DVB Init
[ 80.138166] MT2060: successfully identified (IF1 = 1220)
[ 80.703505] DVB: registering new adapter (em2880 DVB-T)
[ 80.703537] DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)...
[ 80.713450] Em28xx: Initialized (Em2880 DVB Extension) extension
[ 145.710043] lo: Disabled Privacy Extensions
[ 151.227647] usb 1-1: USB disconnect, address 4
[ 151.240126] em28xx #0: reading key failed (error=-19=-ENODEV)
[ 151.281501] em28xx-input.c: remote control handler detached
e questo lsmod:Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID eb1a:2870 eMPIA Technology, Inc. Pinnacle PCTV Stick
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 5986:0180 Acer, Inc
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Module Size Used by
mt2060 4557 1
zl10353 7785 1
em28xx_dvb 16053 0
dvb_core 105239 1 em28xx_dvb
em28xx 403086 1 em28xx_dvb
snd_usb_audio 105567 0
snd_usbmidi_lib 21313 1 snd_usb_audio
cryptd 8140 0
aes_x86_64 7936 2
aes_generic 27631 1 aes_x86_64
binfmt_misc 7984 1
parport_pc 30086 0
ppdev 6804 0
snd_hda_codec_atihdmi 3079 1
snd_hda_codec_idt 64667 1
arc4 1497 2
snd_hda_intel 26019 2
snd_hda_codec 100919 3 snd_hda_codec_atihdmi,snd_hda_codec_idt,snd_hda_intel
snd_hwdep 6660 2 snd_usb_audio,snd_hda_codec
radeon 909450 3
snd_pcm 89104 3 snd_usb_audio,snd_hda_intel,snd_hda_codec
snd_seq_midi 5932 0
snd_rawmidi 22207 2 snd_usbmidi_lib,snd_seq_midi
ath9k 101730 0
snd_seq_midi_event 7291 1 snd_seq_midi
snd_seq 57512 2 snd_seq_midi,snd_seq_midi_event
ath9k_common 6874 1 ath9k
ath9k_hw 314699 2 ath9k,ath9k_common
ath 10413 2 ath9k,ath9k_hw
joydev 11395 0
ttm 68212 1 radeon
snd_timer 23850 2 snd_pcm,snd_seq
snd_seq_device 6912 3 snd_seq_midi,snd_rawmidi,snd_seq
mac80211 266625 2 ath9k,ath9k_common
uvcvideo 62379 0
hp_wmi 6467 0
video 22176 0
lirc_ene0100 7819 0
drm_kms_helper 32836 1 radeon
lirc_dev 11209 1 lirc_ene0100
output 2527 1 video
psmouse 62080 0
videodev 49359 2 em28xx,uvcvideo
v4l1_compat 15519 2 uvcvideo,videodev
v4l2_compat_ioctl32 12614 1 videodev
hp_accel 14304 0
lis3lv02d 10384 1 hp_accel
input_polldev 4527 1 lis3lv02d
snd 64181 15 snd_usb_audio,snd_usbmidi_lib,snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
k10temp 3535 0
serio_raw 4910 0
cfg80211 170293 4 ath9k,ath9k_common,ath,mac80211
led_class 3393 2 ath9k,hp_accel
edac_core 46822 0
edac_mce_amd 9387 0
soundcore 1240 1 snd
snd_page_alloc 8588 2 snd_hda_intel,snd_pcm
drm 206230 5 radeon,ttm,drm_kms_helper
i2c_algo_bit 6208 1 radeon
i2c_piix4 10047 0
lp 10201 0
parport 37032 3 parport_pc,ppdev,lp
ahci 22210 2
libahci 26052 1 ahci
pata_atiixp 4405 0
r8169 42254 0
mii 5261 1 r8169
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID eb1a:2871 eMPIA Technology, Inc.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 5986:0180 Acer, Inc
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Mi dispiace dirtelo...dony-91 ha scritto: Ravviando e usando di nuovo lsusb, il computer la riconosce in modo diversoBus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID eb1a:2871 eMPIA Technology, Inc.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 5986:0180 Acer, Inc
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>:( >:(Sly88 ha scritto:ATTENZIONE, IMPORTANTE !!!CHI ESEGUE QUESTA GUIDA DEVE ASSOLUTAMENTE DISCONNETTERE LA SCHEDA TV QUANDO VENGONO ESEGUITI GLI AGGIORNAMENTI DI SISTEMA DI UBUNTU. ALTRIMENTI, SI RISCHIA DI FAR CAMBIARE L'USB-ID DELLA SCHEDA TV, RENDENDOLA INUTILIZZABILE
Codice: Seleziona tutto
em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 70 28 c0 12 81 00 6a 22 00 00
em28xx #0: i2c eeprom 10: 00 00 04 57 02 0d 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 20: 44 00 00 00 f0 10 02 00 00 00 00 00 5b 00 00 00
em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 22 b4 0a 4a
em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 22 03 55 00 53 00
em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 37 00 30 00 20 00 44 00
em28xx #0: i2c eeprom 80: 65 00 76 00 69 00 63 00 65 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Kaffeine la riconosce però non mi fa vedere nessun canale e se faccio una nuova ricerca non me ne trova nemmeno uno >:(Bus 002 Device 002: ID eb1a:2870 eMPIA Technology, Inc. Pinnacle PCTV Stick
Nelle altre due invece normalmente cioè:Bus 001 Device 007: ID eb1a:2871 eMPIA Technology, Inc.
Resta il fatto che però non mi funziona lo stesso.. >:(Bus 001 Device 006: ID eb1a:2870 eMPIA Technology, Inc. Pinnacle PCTV Stick
Questa è proprio bella !dony-91 ha scritto: Mmm.. ho riscontrato una cosa al quanto strana..
In una porta usb, mi segna la stick come:Nelle altre due invece normalmente cioè:Bus 001 Device 007: ID eb1a:2871 eMPIA Technology, Inc.Resta il fatto che però non mi funziona lo stesso.. >:(Bus 001 Device 006: ID eb1a:2870 eMPIA Technology, Inc. Pinnacle PCTV Stick
Codice: Seleziona tutto
dmesg | tail -n 30Visualizzano questa sezione: Bing [Bot] e 8 ospiti