USB Adapter Wireless 802.11b/g

[matteo92]

Ciao, ho installato Ubuntu, ma purtroppo non mi riconosce l'USB Adapter Wireless 802.11b/g :-[ E siccome mi serve assolutamente per connettermi a Internet, come posso fare??? Grazie a tutti

[matteo92]

Perchè nessuno mi risponde????' Vi prego ho un urgente bisogno di Internet (yes)

[matteo92]

Possibile che non c'è nessuno che abbia usato queste schede???

[AleXit]

Che marca/modello è il tuo usb-adapter? Quello che dici è troppo generico per arrivare a capire il driver giusto da installare.
In ogni caso, posta se puoi i risultati dei seguenti comandi dati sul terminale:
- lsusb (a chiavetta inserita)
- dmesg (subito dopo aver staccato e riattaccato la chiavetta)
- ifconfig

[matteo92]

lsusb (a chiavetta inserita):

Bus 003 Device 004: ID 2001:3a03 D-Link Corp. [hex]
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000

- dmesg (subito dopo aver staccato e riattaccato la chiavetta):

[17179569.184000] Linux version 2.6.17-10-generic (root@vernadsky) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Fri Oct 13 18:45:35 UTC 2006 (Ubuntu 2.6.17-10.33-generic)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009b800 (usable)
[17179569.184000] BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 000000001fea0000 (usable)
[17179569.184000] BIOS-e820: 000000001fea0000 - 000000001feae000 (ACPI data)
[17179569.184000] BIOS-e820: 000000001feae000 - 000000001ff00000 (ACPI NVS)
[17179569.184000] BIOS-e820: 000000001ff00000 - 0000000020000000 (reserved)
[17179569.184000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[17179569.184000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[17179569.184000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 510MB LOWMEM available.
[17179569.184000] found SMP MP-table at 000f6df0
[17179569.184000] On node 0 totalpages: 130720
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] Normal zone: 126624 pages, LIFO batch:31
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 PTLTD ) @ 0x000f6db0
[17179569.184000] ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x1fea81ad
[17179569.184000] ACPI: FADT (v001 ATI Piranha 0x06040000 ATI 0x000f4240) @ 0x1feade20
[17179569.184000] ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @ 0x1feade94
[17179569.184000] ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x1feadf6a
[17179569.184000] ACPI: MCFG (v001 PTLTD MCFG 0x06040000 LTP 0x00000000) @ 0x1feadfc4
[17179569.184000] ACPI: DSDT (v001 ATI SB400 0x06040000 MSFT 0x0100000e) @ 0x00000000
[17179569.184000] ATI board detected. Disabling timer routing over 8254.
[17179569.184000] ACPI: PM-Timer IO Port: 0x8008
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 15:4 APIC version 16
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hda4 ro quiet splash locale=it_IT
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[17179569.184000] Detected 1800.384 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179573.276000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179573.276000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179573.288000] Memory: 508504k/522880k available (1910k kernel code, 13836k reserved, 1070k data, 308k init, 0k highmem)
[17179573.288000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179573.368000] Calibrating delay using timer specific routine.. 3606.07 BogoMIPS (lpj=7212144)
[17179573.368000] Security Framework v1.0.0 initialized
[17179573.368000] SELinux: Disabled at boot.
[17179573.368000] Mount-cache hash table entries: 512
[17179573.368000] CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
[17179573.368000] CPU: After vendor identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
[17179573.368000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[17179573.368000] CPU: L2 Cache: 1024K (64 bytes/line)
[17179573.368000] CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001
[17179573.368000] Checking 'hlt' instruction... OK.
[17179573.384000] SMP alternatives: switching to UP code
[17179573.384000] Freeing SMP alternatives: 16k freed
[17179573.384000] checking if image is initramfs... it is
[17179573.900000] Freeing initrd memory: 5563k freed
[17179573.900000] ACPI: Core revision 20060707
[17179573.904000] ACPI: Looking for DSDT ... not found!
[17179573.908000] CPU0: AMD Turion(tm) 64 Mobile Technology ML-34 stepping 02
[17179573.908000] Total of 1 processors activated (3606.07 BogoMIPS).
[17179573.908000] ENABLING IO-APIC IRQs
[17179573.908000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179573.908000] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[17179573.908000] ...trying to set up timer (IRQ0) through the 8259A ... failed.
[17179573.908000] ...trying to set up timer as Virtual Wire IRQ... works.
[17179574.092000] Brought up 1 CPUs
[17179574.092000] migration_cost=0
[17179574.092000] NET: Registered protocol family 16
[17179574.092000] EISA bus registered
[17179574.092000] ACPI: bus type pci registered
[17179574.092000] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
[17179574.092000] PCI: Not using MMCONFIG.
[17179574.096000] PCI: PCI BIOS revision 2.10 entry at 0xfd63c, last bus=6
[17179574.096000] PCI: Using configuration type 1
[17179574.096000] Setting up standard PCI resources
[17179574.100000] ACPI: Interpreter enabled
[17179574.100000] ACPI: Using IOAPIC for interrupt routing
[17179574.100000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179574.100000] PCI: Probing PCI hardware (bus 00)
[17179574.104000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
[17179574.104000] Boot video device is 0000:01:00.0
[17179574.108000] PCI: Transparent bridge - 0000:00:14.4
[17179574.108000] PCI: Bus #07 (-#08) is hidden behind transparent bridge #06 (-#06) (try 'pci=assign-busses')
[17179574.108000] Please report the result to linux-kernel to fix this permanently
[17179574.108000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179574.112000] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[17179574.112000] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[17179574.112000] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[17179574.112000] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[17179574.112000] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[17179574.112000] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[17179574.112000] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[17179574.112000] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[17179574.112000] ACPI: Embedded Controller [EC0] (gpe 3) interrupt mode.
[17179574.148000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
[17179574.152000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT]
[17179574.152000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[17179574.152000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[17179574.152000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179574.152000] pnp: PnP ACPI init
[17179574.160000] pnp: PnP ACPI: found 11 devices
[17179574.160000] PnPBIOS: Disabled by ACPI PNP
[17179574.160000] PCI: Using ACPI for IRQ routing
[17179574.160000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[17179574.160000] PCI: Cannot allocate resource region 7 of bridge 0000:00:06.0
[17179574.160000] PCI: Cannot allocate resource region 8 of bridge 0000:00:06.0
[17179574.160000] PCI: Cannot allocate resource region 7 of bridge 0000:00:07.0
[17179574.160000] PCI: Cannot allocate resource region 8 of bridge 0000:00:07.0
[17179574.180000] pnp: 00:08: ioport range 0x1080-0x1080 has been reserved
[17179574.180000] pnp: 00:08: ioport range 0x1200-0x120f has been reserved
[17179574.180000] pnp: 00:08: ioport range 0x500-0x51f has been reserved
[17179574.180000] pnp: 00:08: ioport range 0x40b-0x40b has been reserved
[17179574.180000] PCI: Bridge: 0000:00:02.0
[17179574.180000] IO window: 9000-9fff
[17179574.180000] MEM window: c0100000-c01fffff
[17179574.180000] PREFETCH window: c8000000-cfffffff
[17179574.180000] PCI: Bridge: 0000:00:06.0
[17179574.180000] IO window: disabled.
[17179574.180000] MEM window: disabled.
[17179574.180000] PREFETCH window: disabled.
[17179574.180000] PCI: Bridge: 0000:00:07.0
[17179574.180000] IO window: disabled.
[17179574.180000] MEM window: disabled.
[17179574.180000] PREFETCH window: disabled.
[17179574.180000] PCI: Bus 7, cardbus bridge: 0000:06:06.0
[17179574.180000] IO window: 0000a400-0000a4ff
[17179574.180000] IO window: 0000a800-0000a8ff
[17179574.180000] PREFETCH window: 30000000-31ffffff
[17179574.180000] MEM window: 34000000-35ffffff
[17179574.180000] PCI: Bridge: 0000:00:14.4
[17179574.180000] IO window: a000-afff
[17179574.180000] MEM window: c0200000-c02fffff
[17179574.180000] PREFETCH window: 30000000-32ffffff
[17179574.180000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[17179574.180000] PCI: Setting latency timer of device 0000:00:06.0 to 64
[17179574.180000] PCI: Setting latency timer of device 0000:00:07.0 to 64
[17179574.180000] ACPI: PCI Interrupt 0000:06:06.0[A] -> GSI 20 (level, low) -> IRQ 177
[17179574.180000] NET: Registered protocol family 2
[17179574.220000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[17179574.220000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[17179574.220000] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[17179574.220000] TCP: Hash tables configured (established 16384 bind 8192)
[17179574.220000] TCP reno registered
[17179574.220000] audit: initializing netlink socket (disabled)
[17179574.220000] audit(1163950550.220:1): initialized
[17179574.220000] VFS: Disk quotas dquot_6.5.1
[17179574.220000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179574.220000] Initializing Cryptographic API
[17179574.220000] io scheduler noop registered
[17179574.220000] io scheduler anticipatory registered
[17179574.220000] io scheduler deadline registered
[17179574.220000] io scheduler cfq registered (default)
[17179574.220000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[17179574.220000] pcie_portdrv_probe->Dev[5a34:1002] has invalid IRQ. Check vendor BIOS
[17179574.220000] assign_interrupt_mode Found MSI capability
[17179574.220000] Allocate Port Service[0000:00:02.0:pcie00]
[17179574.220000] PCI: Setting latency timer of device 0000:00:06.0 to 64
[17179574.220000] pcie_portdrv_probe->Dev[5a38:1002] has invalid IRQ. Check vendor BIOS
[17179574.220000] assign_interrupt_mode Found MSI capability
[17179574.220000] Allocate Port Service[0000:00:06.0:pcie00]
[17179574.220000] PCI: Setting latency timer of device 0000:00:07.0 to 64
[17179574.220000] pcie_portdrv_probe->Dev[5a39:1002] has invalid IRQ. Check vendor BIOS
[17179574.220000] assign_interrupt_mode Found MSI capability
[17179574.220000] Allocate Port Service[0000:00:07.0:pcie00]
[17179574.220000] isapnp: Scanning for PnP cards...
[17179574.576000] isapnp: No Plug & Play device found
[17179574.596000] Real Time Clock Driver v1.12ac
[17179574.596000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179574.596000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179574.596000] ACPI: PCI Interrupt 0000:00:14.6 -> GSI 17 (level, low) -> IRQ 217
[17179574.596000] ACPI: PCI interrupt for device 0000:00:14.6 disabled
[17179574.596000] mice: PS/2 mouse device common for all mice
[17179574.596000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179574.596000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179574.596000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179574.596000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[17179574.612000] i8042.c: Detected active multiplexing controller, rev 1.1.
[17179574.616000] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[17179574.616000] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[17179574.616000] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[17179574.616000] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[17179574.616000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179574.620000] EISA: Probing bus 0 at eisa.0
[17179574.620000] Cannot allocate resource for EISA slot 1
[17179574.620000] Cannot allocate resource for EISA slot 8
[17179574.620000] EISA: Detected 0 cards.
[17179574.620000] TCP bic registered
[17179574.620000] NET: Registered protocol family 1
[17179574.620000] NET: Registered protocol family 8
[17179574.620000] NET: Registered protocol family 20
[17179574.620000] Using IPI No-Shortcut mode
[17179574.620000] ACPI: (supports S0 S3 S4 S5)
[17179574.620000] Freeing unused kernel memory: 308k freed
[17179575.736000] Capability LSM initialized
[17179575.764000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[17179575.812000] ACPI: Thermal Zone [TZS0] (61 C)
[17179575.868000] ACPI: Thermal Zone [TZS1] (40 C)
[17179575.916000] ACPI: Thermal Zone [TZSV] (47 C)
[17179576.220000] ATIIXP: IDE controller at PCI slot 0000:00:14.1
[17179576.220000] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 225
[17179576.220000] ATIIXP: chipset revision 0
[17179576.220000] ATIIXP: not 100% native mode: will probe irqs later
[17179576.220000] ide0: BM-DMA at 0x8410-0x8417, BIOS settings: hda:DMA, hdb:pio
[17179576.220000] ide1: BM-DMA at 0x8418-0x841f, BIOS settings: hdc:DMA, hdd:pio
[17179576.220000] Probing IDE interface ide0...
[17179576.508000] hda: HTS541010G9AT00, ATA DISK drive
[17179577.184000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179577.200000] Probing IDE interface ide1...
[17179577.936000] hdc: MATSHITAUJ-845D, ATAPI CD/DVD-ROM drive
[17179578.272000] ide1 at 0x170-0x177,0x376 on irq 15
[17179578.280000] hda: max request size: 512KiB
[17179578.284000] hda: 195371568 sectors (100030 MB) w/7539KiB Cache, CHS=16383/255/63, UDMA(100)
[17179578.284000] hda: cache flushes supported
[17179578.284000] hda: hda1 hda2 hda3 hda4
[17179578.372000] hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179578.372000] Uniform CD-ROM driver Revision: 3.20
[17179578.872000] ieee1394: Initialized config rom entry `ip1394'
[17179578.876000] ACPI: PCI Interrupt 0000:06:06.2[C] -> GSI 22 (level, low) -> IRQ 233
[17179578.944000] usbcore: registered new driver usbfs
[17179578.944000] usbcore: registered new driver hub
[17179578.944000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[17179578.944000] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 50
[17179578.944000] ohci_hcd 0000:00:13.0: OHCI Host Controller
[17179578.944000] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[17179579.152000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[233] MMIO=[c0208000-c02087ff] Max Packet=[2048] IR/IT contexts=[4/8]
[17179579.160000] ohci_hcd 0000:00:13.0: irq 50, io mem 0xc0000000
[17179579.220000] usb usb1: configuration #1 chosen from 1 choice
[17179579.220000] hub 1-0:1.0: USB hub found
[17179579.220000] hub 1-0:1.0: 4 ports detected
[17179579.324000] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 50
[17179579.324000] ohci_hcd 0000:00:13.1: OHCI Host Controller
[17179579.324000] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
[17179579.540000] ohci_hcd 0000:00:13.1: irq 50, io mem 0xc0001000
[17179579.600000] usb usb2: configuration #1 chosen from 1 choice
[17179579.600000] hub 2-0:1.0: USB hub found
[17179579.600000] hub 2-0:1.0: 4 ports detected
[17179579.704000] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 50
[17179579.704000] ehci_hcd 0000:00:13.2: EHCI Host Controller
[17179579.704000] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[17179579.704000] ehci_hcd 0000:00:13.2: irq 50, io mem 0xc0002000
[17179579.704000] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179579.704000] usb usb3: configuration #1 chosen from 1 choice
[17179579.704000] hub 3-0:1.0: USB hub found
[17179579.704000] hub 3-0:1.0: 8 ports detected
[17179579.872000] Attempting manual resume
[17179579.912000] kjournald starting. Commit interval 5 seconds
[17179579.912000] EXT3-fs: mounted filesystem with ordered data mode.
[17179580.424000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[1234567812345678]
[17179590.360000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179590.368000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179590.400000] Linux agpgart interface v0.101 (c) Dave Jones
[17179590.424000] input: PC Speaker as /class/input/input0
[17179591.116000] ACPI: PCI Interrupt 0000:00:14.5 -> GSI 17 (level, low) -> IRQ 217
[17179591.284000] ieee80211_crypt: registered algorithm 'NULL'
[17179591.320000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[17179591.320000] ieee80211: Copyright (C) 2004-2005 Intel Corporation
[17179591.632000] ACPI: PCI Interrupt 0000:00:14.6 -> GSI 17 (level, low) -> IRQ 217
[17179591.740000] irda_init()
[17179591.740000] NET: Registered protocol family 23
[17179591.744000] MC'97 1 converters and GPIO not ready (0xff00)
[17179591.744000] ACPI: PCI Interrupt 0000:06:06.3[A] -> GSI 20 (level, low) -> IRQ 177
[17179591.828000] ACPI: PCI Interrupt 0000:06:06.0[A] -> GSI 20 (level, low) -> IRQ 177
[17179591.828000] Yenta: CardBus bridge found at 0000:06:06.0 [1025:0080]
[17179591.828000] Yenta: Using CSCINT to route CSC interrupts to PCI
[17179591.828000] Yenta: Routing CardBus interrupts to PCI
[17179591.828000] Yenta TI: socket 0000:06:06.0, mfunc 0x010a1b22, devctl 0x64
[17179591.920000] sdhci: Secure Digital Host Controller Interface driver, 0.12
[17179591.920000] sdhci: Copyright(c) Pierre Ossman
[17179592.036000] bcm43xx driver
[17179592.060000] Yenta: ISA IRQ mask 0x0ef8, PCI irq 177
[17179592.060000] Socket status: 30000006
[17179592.060000] Yenta: Raising subordinate bus# of parent bus (#06) from #06 to #08
[17179592.060000] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
[17179592.060000] cs: IO port probe 0xa000-0xafff: clean.
[17179592.060000] pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xc02fffff
[17179592.060000] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x32ffffff
[17179592.064000] r8169 Gigabit Ethernet driver 2.2LK loaded
[17179592.064000] ACPI: PCI Interrupt 0000:06:07.0[A] -> GSI 23 (level, low) -> IRQ 58
[17179592.064000] eth0: Identified chip type is 'RTL8169s/8110s'.
[17179592.064000] eth0: RTL8169 at 0xe09de400, 00:0a:e4:e6:c6:26, IRQ 58
[17179592.068000] sdhci: SDHCI controller found at 0000:06:06.4 [104c:8034] (rev 0)
[17179592.068000] ACPI: PCI Interrupt 0000:06:06.4[A] -> GSI 20 (level, low) -> IRQ 177
[17179592.068000] mmc0: SDHCI at 0xc0209000 irq 177 DMA
[17179592.068000] mmc1: SDHCI at 0xc0208c00 irq 177 DMA
[17179592.068000] mmc2: SDHCI at 0xc0208800 irq 177 DMA
[17179592.068000] ACPI: PCI Interrupt 0000:06:05.0[A] -> GSI 21 (level, low) -> IRQ 169
[17179592.420000] cs: IO port probe 0x100-0x3af: clean.
[17179592.420000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[17179592.424000] cs: IO port probe 0x820-0x8ff: excluding 0x878-0x87f
[17179592.424000] cs: IO port probe 0xc00-0xcf7: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcdf
[17179592.424000] cs: IO port probe 0xa00-0xaff: clean.
[17179592.620000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000
[17179592.656000] input: SynPS/2 Synaptics TouchPad as /class/input/input1
[17179592.656000] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1
[17179592.656000] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 3.
[17179592.656000] nsc-ircc, chip->init
[17179592.656000] nsc-ircc, Found chip at base=0x02e
[17179592.656000] nsc-ircc, driver loaded (Dag Brattli)
[17179592.656000] nsc_ircc_open(), can't get iobase of 0x2f8
[17179592.656000] nsc-ircc, Found chip at base=0x02e
[17179592.656000] nsc-ircc, driver loaded (Dag Brattli)
[17179592.656000] nsc_ircc_open(), can't get iobase of 0x2f8
[17179592.656000] pnp: Device 00:0a disabled.
[17179592.668000] ts: Compaq touchscreen protocol output
[17179592.960000] lp: driver loaded but no devices found
[17179593.012000] SCSI subsystem initialized
[17179593.020000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[17179593.020000] ieee1394: sbp2: Try serialize_io=0 for better performance
[17179593.044000] Adding 682720k swap on /dev/disk/by-uuid/557db801-dc87-4ee8-8543-314ab9900474. Priority:-1 extents:1 across:682720k
[17179593.100000] EXT3 FS on hda4, internal journal
[17179594.520000] NET: Registered protocol family 17
[17179597.580000] ACPI: AC Adapter [ADP1] (off-line)
[17179597.788000] ACPI: Battery Slot [BAT0] (battery present)
[17179597.804000] ACPI: Power Button (FF) [PWRF]
[17179597.804000] ACPI: Lid Switch [LID0]
[17179597.804000] ACPI: Sleep Button (CM) [SLPB]
[17179597.852000] ACPI: ACPI Dock Station Driver
[17179597.932000] ibm_acpi: ec object not found
[17179597.956000] pcc_acpi: loading...
[17179598.048000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[17179598.048000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[17179598.292000] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.60.2)
[17179598.292000] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x4 (1450 mV)
[17179598.292000] powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0x6 (1400 mV)
[17179598.292000] powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x16 (1000 mV)
[17179598.292000] cpu_init done, current fid 0xa, vid 0x4
[17179599.820000] [drm] Initialized drm 1.0.1 20051102
[17179599.844000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 18 (level, low) -> IRQ 66
[17179599.848000] [drm] Initialized radeon 1.25.0 20060524 on minor 0
[17179600.528000] [drm] Setting GART location based on new memory map
[17179600.528000] [drm] Loading R300 Microcode
[17179600.528000] [drm] writeback test succeeded in 1 usecs
[17179600.804000] apm: BIOS not found.
[17179603.156000] ttyS1: LSR safety check engaged!
[17179604.520000] input: AT Translated Set 2 keyboard as /class/input/input2
[17179605.048000] Bluetooth: Core ver 2.8
[17179605.048000] NET: Registered protocol family 31
[17179605.048000] Bluetooth: HCI device and connection manager initialized
[17179605.048000] Bluetooth: HCI socket layer initialized
[17179605.108000] Bluetooth: L2CAP ver 2.8
[17179605.108000] Bluetooth: L2CAP socket layer initialized
[17179605.124000] Bluetooth: RFCOMM socket layer initialized
[17179605.124000] Bluetooth: RFCOMM TTY layer initialized
[17179605.124000] Bluetooth: RFCOMM ver 1.7
[17179619.652000] NET: Registered protocol family 10
[17179619.652000] lo: Disabled Privacy Extensions
[17179619.652000] IPv6 over IPv4 tunneling driver
[17179789.064000] psmouse.c: TouchPad at isa0060/serio4/input0 - driver resynched.
[17179930.628000] r8169: eth0: link up
[17179940.784000] eth0: no IPv6 routers present
[17179992.408000] APIC error on CPU0: 00(40)
[17180047.144000] APIC error on CPU0: 40(40)
[17180093.624000] usb 3-2: new high speed USB device using ehci_hcd and address 2
[17180093.756000] usb 3-2: configuration #1 chosen from 1 choice
[17180234.640000] APIC error on CPU0: 40(40)
[17180795.664000] ISO 9660 Extensions: Microsoft Joliet Level 3
[17180795.700000] ISOFS: changing to secondary root
[17180845.408000] ndiswrapper version 1.22 loaded (preempt=no,smp=yes)
[17180845.408000] ndiswrapper (wrapper_init:129): loadndiswrapper failed (32512); check system log for messages from 'loadndisdriver'
[17180845.412000] ndiswrapper (wrapper_init:136): ndiswrapper: initialization failed
[17180961.812000] atkbd.c: Unknown key pressed (translated set 2, code 0xd6 on isa0060/serio0).
[17180961.812000] atkbd.c: Use 'setkeycodes e056 ' to make it known.
[17181159.436000] ndiswrapper version 1.22 loaded (preempt=no,smp=yes)
[17181159.440000] ndiswrapper (wrapper_init:129): loadndiswrapper failed (32512); check system log for messages from 'loadndisdriver'
[17181159.444000] ndiswrapper (wrapper_init:136): ndiswrapper: initialization failed
[17181763.640000] usb 3-2: USB disconnect, address 2
[17181766.652000] usb 3-3: new high speed USB device using ehci_hcd and address 3
[17181766.784000] usb 3-3: configuration #1 chosen from 1 choice
[17181998.756000] usb 3-3: USB disconnect, address 3
[17182279.472000] usb 3-3: new high speed USB device using ehci_hcd and address 4
[17182279.604000] usb 3-3: configuration #1 chosen from 1 choice
[17182925.612000] usb 3-3: USB disconnect, address 4
[17182945.256000] usb 3-2: new high speed USB device using ehci_hcd and address 5
[17182945.388000] usb 3-2: configuration #1 chosen from 1 choice

ifconfig:

eth0 Link encap:Ethernet HWaddr 00:0A:E4:E6:C6:26
inet addr:192.168.1.197 Bcast:255.255.255.255 Mask:255.255.255.0
inet6 addr: fe80::20a:e4ff:fee6:c626/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1951 errors:0 dropped:0 overruns:0 frame:0
TX packets:2046 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:768360 (750.3 KiB) TX bytes:371725 (363.0 KiB)
Interrupt:58 Base address:0xe400

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:200 (200.0 b) TX bytes:200 (200.0 b)

Aspetto una vostra risposta. Ciao e grazie

[matteo92]

Sapete dirmi qualcosa??? Grazie

[AleXit]

Un po' di pazienza, inanzitutto...
dalle mie ricerche, risulta che la tua chiavetta è una d-link g132 e monta un chipset atheros AR5005UG.
Nel forum internazionale di ubuntu, (http://www.ubuntuforums.org/showthread.php?t=286530) sono riusciti a farla funzionare con ndiswrapper, una sorta di emulatore che ti permette di usare i drivers per windows.
Se cerchi nel forum info su ndiswrapper, non ti dovrebbe essere difficile installarlo.
Comunque si trova già nei repository di ubuntu, basta un

Codice: Seleziona tutto

sudo apt-get install ndiswrapper

Dal tuo log leggo pero' che dovresti aver già installato una versione di ndiswrapper. Prova solo a configurarlo con i comandi

Codice: Seleziona tutto

sudo ndiswrapper -i /path/del/driver/di/windows.inf

a questo punto verifica il funzionamento digitando
ndiswrapper -l
l'output dovrebbe essere simile a questo

Codice: Seleziona tutto

{name of driver}  driver present, hardware present

Fai un po' di prove e poi fammi sapere...
Ciao

[matteo92]

Scusami per la fretta, ma ho veramente urgente bisogno :-\ Cmq a breve provo a fare quello che mi hai detto sopra e ti faccio sapere (good) Grazie

[matteo92]

Ho provato a fare quello che mi hai detto, questi sono i risultati: Link all'immagine
Grazie, aspetto una vostra risposta

[matteo92]

Ho scritto un messaggio perchè il post stava scomparendo nei meandri del forum (rotfl) Scusare :'(

[AleXit]

ehhhhhhmmmm
mi sembrava chiaro che nel comando

Codice: Seleziona tutto

sudo ndiswrapper -i /path/del/driver/di/windows.inf

ci dovessi mettere il VERO percorso del driver .inf di windows per la tua chiavetta........

In pratica, fai una cartella e mettici dentro il file con estensione .inf e quello .sys.
poi nel path ci metti il percorso COMPLETO del file inf...

[matteo92]

Ma come devo impostare il percorso??? Cioè, dovrei fare così: sudo ndiswrapper -i /Matteo/home/desktop/windows.inf oppure sudo ndiswrapper -i /FileSystem/Matteo/Home/Desktop/windows.inf??? Aspetto una vostra risposta e poi posto i risultati, ma questa cosa la devo fare sia per il file .inf che per il file .sys???

[AleXit]

lo devi fare solo per il file .inf.
il percorso completo sarebbe del tipo
/home/Matteo/Desktop/driver.inf

Ps
il file .sys deve essere nella stessa cartella del .inf.

[ubu]

Prova a seguire le indicazioni che ci sono su questa pagina:

http://www.debianitalia.org/modules/wfs ... icleid=130

Sono per una D-Link DWL-G122 C ma potrebbero andare bene anche per la tua o comunque costituiscono una traccia da seguire.

Ciao, Lorenzo

[matteo92]

Ho provato a fare come dici, ma questi sono i risultati: Link all'immagine

[AleXit]

hai sbagliato ancora path. prova con:

Codice: Seleziona tutto

sudo ndiswrapper -i /home/Matteo/Desktop/athfmwdl.inf

Ammesso che il tuo file .inf si trovi sul desktop.

Ps: potresti evitare di mettere screenshot e copiare-incollare direttamente qui il testo del risultato del terminale? Grazie...