[Install] Ubuntu non parte dopo aggiornamento a 11.04

Problemi riscontrati durante l'installazione di Ubuntu, degli aggiornamenti e degli avanzamenti del sistema.
Angel2006
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 269
Iscrizione: lunedì 17 dicembre 2007, 23:57

[Install] Ubuntu non parte dopo aggiornamento a 11.04

Messaggio da Angel2006 »

Come da titolo, mi si blocca al logo iniziale..quello con i pallini e la scritta ubuntu su sfondo fucsia ..
volevo dire pero' che il grub mi è rimasto uguale..cioè c'è scritto ancora Ubuntu 10.04 .. ma non penso sia un problema..perchè con la 10.10 andava senza problemi..

ho provato a fare partire in modalità grafica ridotta e ubuntu va (anche se a livello estetico è rimasto tutto invariato rispetto alla 10.10) .. solo che quando ha fatto l'accesso mi ha detto che la scheda video/driver non è compatibile con natty (sicuramente devo aggiornare i driver) e di far partire tramite "ubuntu classico" scegliendolo dalla finestra di log (o qualcosa simile)...

cosa puo' essere? perchè non parte ubuntu in modalità normale? Grazie mille a tutti :)



EDIT: leggendo in giro, alcuni hanno risolto reinstallando i driver nvidia..ma non capisco come fare a reinstallarli ...sinceramente ho sempre seguito 2000 guide ma mi ha sempre dato errori...qualcuno mi indica la strada più sicura per reinstallare sti driver nvidia? e magari all'ultima versione? :) Grazie mille!
Ultima modifica di Angel2006 il lunedì 23 maggio 2011, 9:45, modificato 1 volta in totale.
fraverick
Prode Principiante
Messaggi: 3
Iscrizione: lunedì 23 maggio 2011, 14:46

Re: [Install] Ubuntu non parte dopo aggiornamento a 11.04

Messaggio da fraverick »

Prova da console (alt F2) a dare

sudo stop gdm 

così potrai modificare il file Xorg o installare i driver nvidia e far ripartire la modalità grafica con:

sudo start gdm
Ultima modifica di fraverick il lunedì 23 maggio 2011, 14:57, modificato 1 volta in totale.
Avatar utente
Diabolik62
Tenace Tecnocrate
Tenace Tecnocrate
Messaggi: 16046
Iscrizione: domenica 20 dicembre 2009, 16:29
Distribuzione: wind 10049 archfce4.12

Re: [Install] Ubuntu non parte dopo aggiornamento a 11.04

Messaggio da Diabolik62 »

rientra nel login in low graphic e fai partire ubuntu normale non unity,vedi se funge
Angel2006
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 269
Iscrizione: lunedì 17 dicembre 2007, 23:57

Re: [Install] Ubuntu non parte dopo aggiornamento a 11.04

Messaggio da Angel2006 »

fraverick ha scritto: Prova da console (alt F2) a dare

sudo stop gdm 

così potrai modificare il file Xorg o installare i driver nvidia e far ripartire la modalità grafica con:

sudo start gdm

non funzia.. :( mi ritorna nella modalità normale..ma se avvio ubuntu come root in riga di comando e provo ad installare gli ultimi driver che ho scaricato (io ho i 185 .. mentre gli ultimi sono i 270 ) mi da diversi errori..
Diabolik62 ha scritto: rientra nel login in low graphic e fai partire ubuntu normale non unity,vedi se funge
si funge .. sempre in low graphic.. ho provato anche a settare i driver 173 .. ma niente.. è la stessa cosa, anzi con questi neanche si blocca al logo "ubuntu" .. mi va direttamente in riga di comando...
Avatar utente
hellojoker
Rampante Reduce
Rampante Reduce
Messaggi: 7740
Iscrizione: martedì 22 febbraio 2011, 20:37
Desktop: Gnome Shell
Distribuzione: Fedora|Win10

Re: [Install] Ubuntu non parte dopo aggiornamento a 11.04

Messaggio da hellojoker »

che computer è?
Avatar utente
Diabolik62
Tenace Tecnocrate
Tenace Tecnocrate
Messaggi: 16046
Iscrizione: domenica 20 dicembre 2009, 16:29
Distribuzione: wind 10049 archfce4.12

Re: [Install] Ubuntu non parte dopo aggiornamento a 11.04

Messaggio da Diabolik62 »

avvia in modalita low graphic
da terminale dai
sudo apt-get --purge remove xserver-xorg-video-nouveau
sempre da terminale
sudo apt-get --purge remove nvidia-current
e reinstalli
sudo apt-get install nvidia-current
riavvia
Angel2006
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 269
Iscrizione: lunedì 17 dicembre 2007, 23:57

Re: [Install] Ubuntu non parte dopo aggiornamento a 11.04

Messaggio da Angel2006 »

perfetto.. ora è andato reinstallando di driver.. :) grazie diabolik!!

Pero' .. non vedo nessun effetto grafico diverso.. il desktop è precisamente identico a quello che avevo prima..e non so più come abilitare gli effetti grafici .. O.o

(tipo le finestre che quando le sposti non sono rigide..ma più "flessibili")...


p.s. è un hp dv 6530el :)
paglia
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 569
Iscrizione: domenica 14 dicembre 2008, 15:29

Re: [Install] Ubuntu non parte dopo aggiornamento a 11.04

Messaggio da paglia »

Angel2006 ha scritto: perfetto.. ora è andato reinstallando di driver.. :) grazie diabolik!!

Pero' .. non vedo nessun effetto grafico diverso.. il desktop è precisamente identico a quello che avevo prima..e non so più come abilitare gli effetti grafici .. O.o

(tipo le finestre che quando le sposti non sono rigide..ma più "flessibili")...


p.s. è un hp dv 6530el :)
per avviare unity sceglilo dal gdm usando la voce Ubuntu e non Ubuntu versione classica
paglias.net Blog su Ubuntu!
Angel2006
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 269
Iscrizione: lunedì 17 dicembre 2007, 23:57

Re: [Install] Ubuntu non parte dopo aggiornamento a 11.04

Messaggio da Angel2006 »

eh ho fatto così infatti .. ma questo è il risultato .. :/
paglia
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 569
Iscrizione: domenica 14 dicembre 2008, 15:29

Re: [Install] Ubuntu non parte dopo aggiornamento a 11.04

Messaggio da paglia »

Angel2006 ha scritto: eh ho fatto così infatti .. ma questo è il risultato .. :/
Cioè ti si avvia la modalità classica con i due pannelli senza nessun avviso che dica che non puoi usare unity?
paglias.net Blog su Ubuntu!
Angel2006
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 269
Iscrizione: lunedì 17 dicembre 2007, 23:57

Re: [Install] Ubuntu non parte dopo aggiornamento a 11.04

Messaggio da Angel2006 »

mi si avvia per come l'avevo modificato io l'anno scorso ..colori, solo barra sotto, lanciatori sul pannello .. ecc ecc..
Avatar utente
Diabolik62
Tenace Tecnocrate
Tenace Tecnocrate
Messaggi: 16046
Iscrizione: domenica 20 dicembre 2009, 16:29
Distribuzione: wind 10049 archfce4.12

Re: [Install] Ubuntu non parte dopo aggiornamento a 11.04

Messaggio da Diabolik62 »

Angel2006 ha scritto: eh ho fatto così infatti .. ma questo è il risultato .. :/
scusa ma quale sarebbe il risultato io non vedo na mazza
Angel2006
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 269
Iscrizione: lunedì 17 dicembre 2007, 23:57

Re: [Install] Ubuntu non parte dopo aggiornamento a 11.04

Messaggio da Angel2006 »

nonono parlo del fatto che non ci sono effetti...a quello mi riferivo con la parola "questo" ...
Avatar utente
Diabolik62
Tenace Tecnocrate
Tenace Tecnocrate
Messaggi: 16046
Iscrizione: domenica 20 dicembre 2009, 16:29
Distribuzione: wind 10049 archfce4.12

Re: [Install] Ubuntu non parte dopo aggiornamento a 11.04

Messaggio da Diabolik62 »

Angel2006 ha scritto: nonono parlo del fatto che non ci sono effetti...a quello mi riferivo con la parola "questo" ...
installa compiz settings manager,  avvialo e insersci gli effetti
Angel2006
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 269
Iscrizione: lunedì 17 dicembre 2007, 23:57

Re: [Install] Ubuntu non parte dopo aggiornamento a 11.04

Messaggio da Angel2006 »

ehm ce l'ho già installato.. ma non so come avviarlo ..
Avatar utente
Diabolik62
Tenace Tecnocrate
Tenace Tecnocrate
Messaggi: 16046
Iscrizione: domenica 20 dicembre 2009, 16:29
Distribuzione: wind 10049 archfce4.12

Re: [Install] Ubuntu non parte dopo aggiornamento a 11.04

Messaggio da Diabolik62 »

cercalo nella tray su in cima alla tua sx,tramite cerca o vai nelle applicazioni
Angel2006
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 269
Iscrizione: lunedì 17 dicembre 2007, 23:57

Re: [Install] Ubuntu non parte dopo aggiornamento a 11.04

Messaggio da Angel2006 »

l'ho trovato ma sta impostato per bene..soltanto che ancora non ci sono effetti... :/

edit: poi ho notato anche che quando le finestre sono ridotte ad icona, se le devo massimizzare ci vogliono 2 secondi almeno..stesso tempo per ridurre ad icona...
Ultima modifica di Angel2006 il lunedì 23 maggio 2011, 21:27, modificato 1 volta in totale.
Avatar utente
Diabolik62
Tenace Tecnocrate
Tenace Tecnocrate
Messaggi: 16046
Iscrizione: domenica 20 dicembre 2009, 16:29
Distribuzione: wind 10049 archfce4.12

Re: [Install] Ubuntu non parte dopo aggiornamento a 11.04

Messaggio da Diabolik62 »

dai
compiz --replace
Angel2006
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 269
Iscrizione: lunedì 17 dicembre 2007, 23:57

Re: [Install] Ubuntu non parte dopo aggiornamento a 11.04

Messaggio da Angel2006 »

mi restituisce questo.. sembra abbia riavviato compiz.. ma non cmq cambiato nulla :(

Spoiler
Mostra

Codice: Seleziona tutto

angel2k6@my-laptop:~$ compiz --replace
Backend     : gconf
Integration : true
Profile     : unity
Adding plugins
Initializing core options...done
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 1
Window created on XQueryTree, map state isViewable? 1
Window created on XQueryTree, map state isViewable? 1
Window created on XQueryTree, map state isViewable? 1
Window created on XQueryTree, map state isViewable? 1
Window created on XQueryTree, map state isViewable? 1
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 1
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 1
Window created on XQueryTree, map state isViewable? 1
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 0
Window created on XQueryTree, map state isViewable? 1
Initializing bailer options...done
Initializing detection options...done
Initializing composite options...done
Xlib:  extension "GLX" missing on display ":0.0".
Xlib:  extension "GLX" missing on display ":0.0".
Xlib:  extension "GLX" missing on display ":0.0".
Compiz (opengl) - Fatal: glXCreateContext failed
Compiz (bailer) - Info: Ensuring a shell for your session
angel2k6@my-laptop:~$ Cannot register the panel shell: there is already one running.
Avviso del window manager: Received a _NET_WM_MOVERESIZE message for 0x4a0003a ([Install] ); these messages lack timestamps and therefore suck.
RO.RO.19
Prode Principiante
Messaggi: 35
Iscrizione: giovedì 7 aprile 2011, 19:49

Re: [Install] Ubuntu non parte dopo aggiornamento a 11.04

Messaggio da RO.RO.19 »

Ciao! Ho avuto lo stesso problema nel fisso...ma quando vado rimuovere e reinstallare, mi dice che non trova i pacchetti! Come posso fare?
Scrivi risposta

Ritorna a “Installazione e aggiornamento del sistema operativo”

Chi c’è in linea

Visualizzano questa sezione: Bing [Bot], Claudio F e 6 ospiti