Ho un netbook ACER ONE D250 che con Ubuntu va benissimo. Il problema è relativo ad un lettore/masterizzatore DVD esterno USB che non è montato in automatico. Non si può dire che non sia riconosciuto perchè in Sistema>Amministrazione>Gestore Dischi è rilevato correttamente così come da vari comandi e così come da Win. Ho trovato delle guide su questo forum che modificano /etc/fstab. Le ho provate tutte senza risultato e IMHO la strada non è quella giusta. Infatti in un altro PC, con xubuntu che ha gia un lettore, appena è inserito viene visualizzato e il /etc/fstab non ha alcuna riga relativa al lettore interno ne a quello esterno. Penso sia un problema di un servizio che magari è abilitato nel pc che ha il lettore DVD all'installazione. Quando installi in un pc dove non c'è il CD non è abilitato un modulo del kernel, magari UDEV ma non ci capisco un granchè. Qualche info?
Grazie.
Lettore Masterizzatore esterno USB non montato in automatico
-
giacomosmit
- Imperturbabile Insigne
- Messaggi: 3225
- Iscrizione: venerdì 3 dicembre 2010, 22:04
Re: Lettore Masterizzatore esterno USB non montato in automatico
é normale che non lo monti in automatico . come per gli hard disk . dovresti crearti un collegamento sulla scrivania e salvarlo ( da terminale non so )
Ricordo che sono da cell., non vogliatemene se non cito tutti o altro. Lo sapete che con quel display è un casino.
Salva l'Ucraina!
Salva l'Ucraina!
-
krava58
- Prode Principiante
- Messaggi: 76
- Iscrizione: giovedì 14 febbraio 2008, 20:44
- Località: Forlì
- Contatti:
Re: Lettore Masterizzatore esterno USB non montato in automatico
Non mi hai convinto. Se hai una installazione di Ubuntu in macchine nelle quali già esistono lettori/masterizzatori, tu infili il cavo USB del masterizzatore esterno e poi lo usi tranquillamente. Quindi sono più che sicuro che è un qualcosa che riguarda la configurazione. Non ci vogliono hardlink o softlink e probabilmente nessuna modifica di /etc/fstab.é normale che non lo monti in automatico . come per gli hard disk . dovresti crearti un collegamento sulla scrivania e salvarlo ( da terminale non so )
-
magozurlinux
- Accecante Asceta
- Messaggi: 25012
- Iscrizione: mercoledì 17 marzo 2010, 17:44
- Desktop: xubuntu
- Distribuzione: Xubuntu 22.04.3 LTS x86_64
- Sesso: Maschile
- Località: Pisa
Re: Lettore Masterizzatore esterno USB non montato in automatico
Effettivamente, un masterizzatore o lettore usb, dovrebbe essere riconosciuto automaticamente appena inserito ad una porta usb, a meno che non ci sia qualche regola udev da modificare per farlo funzionare automaticamente.
Da terminale col masterizzatore usb inserito postami questi comandi:
Da terminale col masterizzatore usb inserito postami questi comandi:
Codice: Seleziona tutto
dmesg | grep usb
Codice: Seleziona tutto
dmesg | grep CD-ROM
Codice: Seleziona tutto
cdrecord -scanbus
Codice: Seleziona tutto
wodim --devices
-
krava58
- Prode Principiante
- Messaggi: 76
- Iscrizione: giovedì 14 febbraio 2008, 20:44
- Località: Forlì
- Contatti:
Re: Lettore Masterizzatore esterno USB non montato in automatico
magozurlinux ha scritto: Effettivamente, un masterizzatore o lettore usb, dovrebbe essere riconosciuto automaticamente appena inserito ad una porta usb, a meno che non ci sia qualche regola udev da modificare per farlo funzionare automaticamente.
Da terminale col masterizzatore usb inserito postami questi comandi:
Codice: Seleziona tutto
dmesg | grep usb [ 0.406298] usbcore: registered new interface driver usbfs [ 0.406346] usbcore: registered new interface driver hub [ 0.406437] usbcore: registered new device driver usb [ 1.228047] usb 1-2: new high speed USB device using ehci_hcd and address 2 [ 1.776086] usb 1-8: new high speed USB device using ehci_hcd and address 4 [ 2.165338] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 2.195611] scsi0 : usb-storage 1-8:1.0 [ 2.196378] usbcore: registered new interface driver usb-storage [ 2.400704] usbcore: registered new interface driver hiddev [ 2.404938] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input5 [ 2.405334] generic-usb 0003:046D:C526.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1/input0 [ 2.411022] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/input/input6 [ 2.411447] generic-usb 0003:046D:C526.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.1-1/input1 [ 2.411514] usbcore: registered new interface driver usbhid [ 2.411521] usbhid: USB HID core driver [ 28.000972] input: Webcam as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/input/input8 [ 28.001290] usbcore: registered new interface driver uvcvideo [ 379.760153] usb 1-1: new high speed USB device using ehci_hcd and address 5 [ 379.894838] usb-storage 1-1:1.0: Quirks match for vid 05e3 pid 0701: 520 [ 379.894976] scsi5 : usb-storage 1-1:1.0
TSSTcorp... è lui!!!Codice: Seleziona tutto
dmesg | grep CD-ROM [ 380.945565] scsi 5:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S202J SB01 PQ: 0 ANSI: 0 [ 381.223650] Uniform CD-ROM driver Revision: 3.20 [ 381.224016] sr 5:0:0:0: Attached scsi CD-ROM sr0
Codice: Seleziona tutto
cdrecord -scanbus scsibus5: 5,0,0 500) 'TSSTcorp' 'CDDVDW SH-S202J ' 'SB01' Removable CD-ROM 5,1,0 501) * 5,2,0 502) * 5,3,0 503) * 5,4,0 504) * 5,5,0 505) * 5,6,0 506) * 5,7,0 507) *
Ecco. Come vedi è riconosciuto ma non viene montato. Con un cd dentro ho provato a montarlo manualmente ma è uno schifo: ci vuole un sacco per leggere i file e comunque se apro Brasero non riconosce il CD e quindi non copia. (P.S. il Cd era una xubuntu)Codice: Seleziona tutto
wodim --devices wodim: Overview of accessible drives (1 found) : ------------------------------------------------------------------------- 0 dev='/dev/scd0' rwrw-- : 'TSSTcorp' 'CDDVDW SH-S202J' -------------------------------------------------------------------------
-
magozurlinux
- Accecante Asceta
- Messaggi: 25012
- Iscrizione: mercoledì 17 marzo 2010, 17:44
- Desktop: xubuntu
- Distribuzione: Xubuntu 22.04.3 LTS x86_64
- Sesso: Maschile
- Località: Pisa
Re: Lettore Masterizzatore esterno USB non montato in automatico
Gli outputs che hai postato vanno bene.
Non c'è una cartella di nome cdrom0 in /media;
dai questi comandi senza cd o DVD inserito nel masterizzatore usb:
vai in fondo al file e premi Invio; aggiungi questa riga:
Salva ed esci dall'editor di testo.
Da terminale dai questi comandi:
aggiungi in fondo queste righe:
Riavvia il pc.
Non c'è una cartella di nome cdrom0 in /media;
dai questi comandi senza cd o DVD inserito nel masterizzatore usb:
Codice: Seleziona tutto
sudo mkdir /media/cdrom0
Codice: Seleziona tutto
sudo gedit /etc/fstab
Codice: Seleziona tutto
/dev/sr0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
Da terminale dai questi comandi:
Codice: Seleziona tutto
sudo mount -a
Codice: Seleziona tutto
sudo gedit /etc/hdparm.conf
Codice: Seleziona tutto
/dev/sr0 {
dma = on
}
-
krava58
- Prode Principiante
- Messaggi: 76
- Iscrizione: giovedì 14 febbraio 2008, 20:44
- Località: Forlì
- Contatti:
Re: Lettore Masterizzatore esterno USB non montato in automatico
Eccetto quello di hdparm, gli altri comandi li avevo già provati. L'ho fatto di nuovo ma con lo stesso successo: nada de nada. Ho intenzione di prendere un hd, sostituirlo a questo (lho già fatto ed è facile) installare ubuntu 10.10 dal lettore esterno invece che dalla chiavetta e poi confrontare la parte relativa a UDEV perchè IMHO il trucco è lì o in qualche script particolare.magozurlinux ha scritto: Gli outputs che hai postato vanno bene.
Non c'è una cartella di nome cdrom0 in /media;
dai questi comandi senza cd o DVD inserito nel masterizzatore usb:
Codice: Seleziona tutto
sudo mkdir /media/cdrom0vai in fondo al file e premi Invio; aggiungi questa riga:Codice: Seleziona tutto
sudo gedit /etc/fstab
Salva ed esci dall'editor di testo.Codice: Seleziona tutto
/dev/sr0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
Da terminale dai questi comandi:
Codice: Seleziona tutto
sudo mount -aaggiungi in fondo queste righe:Codice: Seleziona tutto
sudo gedit /etc/hdparm.conf
Riavvia il pc.Codice: Seleziona tutto
/dev/sr0 { dma = on }
Altre idee?
-
magozurlinux
- Accecante Asceta
- Messaggi: 25012
- Iscrizione: mercoledì 17 marzo 2010, 17:44
- Desktop: xubuntu
- Distribuzione: Xubuntu 22.04.3 LTS x86_64
- Sesso: Maschile
- Località: Pisa
Re: Lettore Masterizzatore esterno USB non montato in automatico
Da terminale dai questo comando:
controlla che il tuo nome utente sia associato al gruppo cdrom.
Se non risulta associato al gruppo cdrom, da terminale dai questo comando:
Questo è il mio output
Codice: Seleziona tutto
groups
Se non risulta associato al gruppo cdrom, da terminale dai questo comando:
Codice: Seleziona tutto
sudo adduser tuo-username cdrom
Questo è il mio output
Aggiungendo una regola udev al tuo sistema dovresti riuscire a far funzionare il masterizzatore esterno usb.jupiter@jupiter:~$ groups
jupiter adm disk dialout cdrom floppy plugdev fuse lpadmin admin sambashare
Ultima modifica di magozurlinux il mercoledì 5 ottobre 2011, 19:01, modificato 1 volta in totale.
-
luna10
- Prode Principiante
- Messaggi: 54
- Iscrizione: venerdì 7 ottobre 2011, 10:25
- Desktop: gnome
- Distribuzione: ubuntu 14.04 64bit
Re: Lettore Masterizzatore esterno USB non montato in automatico
scusate se mi intrometto ma anche io ho lo stesso problema
con il masterizzaatore usb
ho gia un lettore cd (non masterizzatore) che funziona perfettamente
ho fatto tutto fino alla risposta 06
come si inserisce la regola udev ?
grazie in anticipo
con il masterizzaatore usb
ho gia un lettore cd (non masterizzatore) che funziona perfettamente
ho fatto tutto fino alla risposta 06
come si inserisce la regola udev ?
grazie in anticipo
Ultima modifica di luna10 il venerdì 7 ottobre 2011, 11:28, modificato 1 volta in totale.
-
luna10
- Prode Principiante
- Messaggi: 54
- Iscrizione: venerdì 7 ottobre 2011, 10:25
- Desktop: gnome
- Distribuzione: ubuntu 14.04 64bit
Re: Lettore Masterizzatore esterno USB non montato in automatico
pippo@pippo-desktop:~$ groups
pippo adm dialout cdrom plugdev lpadmin admin sambashare
pippo@pippo-desktop:~$
questo e' il risulato
pippo adm dialout cdrom plugdev lpadmin admin sambashare
pippo@pippo-desktop:~$
questo e' il risulato
-
magozurlinux
- Accecante Asceta
- Messaggi: 25012
- Iscrizione: mercoledì 17 marzo 2010, 17:44
- Desktop: xubuntu
- Distribuzione: Xubuntu 22.04.3 LTS x86_64
- Sesso: Maschile
- Località: Pisa
Re: Lettore Masterizzatore esterno USB non montato in automatico
Se hai due masterizzatori, uno interno (/dev/sr0) ed uno esterno (/dev/sr1), devi creare una regola udev per quello esterno.
Da terminale col masterizzatore usb esterno postami l'output di questo comando:
Da terminale col masterizzatore usb esterno postami l'output di questo comando:
Codice: Seleziona tutto
find /sys -name sr1
-
luna10
- Prode Principiante
- Messaggi: 54
- Iscrizione: venerdì 7 ottobre 2011, 10:25
- Desktop: gnome
- Distribuzione: ubuntu 14.04 64bit
Re: Lettore Masterizzatore esterno USB non montato in automatico
pippo@pippo-desktop:~$ find /sys -name sr1
pippo@pippo-desktop:~$
pippo@pippo-desktop:~$
-
magozurlinux
- Accecante Asceta
- Messaggi: 25012
- Iscrizione: mercoledì 17 marzo 2010, 17:44
- Desktop: xubuntu
- Distribuzione: Xubuntu 22.04.3 LTS x86_64
- Sesso: Maschile
- Località: Pisa
Re: Lettore Masterizzatore esterno USB non montato in automatico
Col masterizzatore usb inserito postami questo comando:
Codice: Seleziona tutto
dmesg | grep CD-ROM
-
luna10
- Prode Principiante
- Messaggi: 54
- Iscrizione: venerdì 7 ottobre 2011, 10:25
- Desktop: gnome
- Distribuzione: ubuntu 14.04 64bit
Re: Lettore Masterizzatore esterno USB non montato in automatico
pippo@pippo-desktop:~$ dmesg | grep CD-ROM
pippo@pippo-desktop:~$
pippo@pippo-desktop:~$
-
luna10
- Prode Principiante
- Messaggi: 54
- Iscrizione: venerdì 7 ottobre 2011, 10:25
- Desktop: gnome
- Distribuzione: ubuntu 14.04 64bit
Re: Lettore Masterizzatore esterno USB non montato in automatico
ho spento e riavviato con il masterizzatore usb insirito nella porta e e' cambiato tutto cosi
pippo@pippo-desktop:~$ dmesg | grep CD-ROM
[ 1.155734] scsi 1:0:0:0: CD-ROM HL-DT-ST CD-ROM GCR-8521B 1.02 PQ: 0 ANSI: 5
[ 1.161512] Uniform CD-ROM driver Revision: 3.20
[ 1.161778] sr 1:0:0:0: Attached scsi CD-ROM sr0
pippo@pippo-desktop:~$
pippo@pippo-desktop:~$ dmesg | grep CD-ROM
[ 1.155734] scsi 1:0:0:0: CD-ROM HL-DT-ST CD-ROM GCR-8521B 1.02 PQ: 0 ANSI: 5
[ 1.161512] Uniform CD-ROM driver Revision: 3.20
[ 1.161778] sr 1:0:0:0: Attached scsi CD-ROM sr0
pippo@pippo-desktop:~$
pippo@pippo-desktop:~$ dmesg | grep CD-ROM
[ 1.155734] scsi 1:0:0:0: CD-ROM HL-DT-ST CD-ROM GCR-8521B 1.02 PQ: 0 ANSI: 5
[ 1.161512] Uniform CD-ROM driver Revision: 3.20
[ 1.161778] sr 1:0:0:0: Attached scsi CD-ROM sr0
pippo@pippo-desktop:~$
pippo@pippo-desktop:~$ dmesg | grep CD-ROM
[ 1.155734] scsi 1:0:0:0: CD-ROM HL-DT-ST CD-ROM GCR-8521B 1.02 PQ: 0 ANSI: 5
[ 1.161512] Uniform CD-ROM driver Revision: 3.20
[ 1.161778] sr 1:0:0:0: Attached scsi CD-ROM sr0
pippo@pippo-desktop:~$
-
magozurlinux
- Accecante Asceta
- Messaggi: 25012
- Iscrizione: mercoledì 17 marzo 2010, 17:44
- Desktop: xubuntu
- Distribuzione: Xubuntu 22.04.3 LTS x86_64
- Sesso: Maschile
- Località: Pisa
Re: Lettore Masterizzatore esterno USB non montato in automatico
quello evidenziato in rosso è il tuo lettore CD interno al pc; quello usb esterno non viene rilevato.pippo@pippo-desktop:~$ dmesg | grep CD-ROM
[ 1.155734] scsi 1:0:0:0: CD-ROM HL-DT-ST CD-ROM GCR-8521B 1.02 PQ: 0 ANSI: 5
[ 1.161512] Uniform CD-ROM driver Revision: 3.20
[ 1.161778] sr 1:0:0:0: Attached scsi CD-ROM sr0
questo è il mio output:
jupiter@jupiter:~$ dmesg | grep CD-ROM
[ 1.780379] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4082B A201 PQ: 0 ANSI: 5
[ 1.795921] Uniform CD-ROM driver Revision: 3.20
[ 1.796423] sr 1:0:0:0: Attached scsi CD-ROM sr0
-
luna10
- Prode Principiante
- Messaggi: 54
- Iscrizione: venerdì 7 ottobre 2011, 10:25
- Desktop: gnome
- Distribuzione: ubuntu 14.04 64bit
Re: Lettore Masterizzatore esterno USB non montato in automatico
ho provato su un altro pc con windows e funziona perfetto
sai consigliarmi su cosa fare ?
grazie
sai consigliarmi su cosa fare ?
grazie
Ultima modifica di luna10 il venerdì 7 ottobre 2011, 12:34, modificato 1 volta in totale.
-
magozurlinux
- Accecante Asceta
- Messaggi: 25012
- Iscrizione: mercoledì 17 marzo 2010, 17:44
- Desktop: xubuntu
- Distribuzione: Xubuntu 22.04.3 LTS x86_64
- Sesso: Maschile
- Località: Pisa
Re: Lettore Masterizzatore esterno USB non montato in automatico
Con Windows funziona perchè ha il suo driver; con Linux certe volte ci sono problemi, facciamo quest'altra prova:
Da terminale senza il masterizzatore usb inserito dai questo comando:
inserisci il masterizzatore ad una porta usb;
segui l'output dei messaggi emanati dal comando tail -f ....
quando ha terminato di emettere messaggi premi Ctrl c per terminare il comando.
Postami l'output di questi messaggi emessi dal comando tail -f ...
Da terminale senza il masterizzatore usb inserito dai questo comando:
Codice: Seleziona tutto
tail -f /var/log/messages
segui l'output dei messaggi emanati dal comando tail -f ....
quando ha terminato di emettere messaggi premi Ctrl c per terminare il comando.
Postami l'output di questi messaggi emessi dal comando tail -f ...
-
luna10
- Prode Principiante
- Messaggi: 54
- Iscrizione: venerdì 7 ottobre 2011, 10:25
- Desktop: gnome
- Distribuzione: ubuntu 14.04 64bit
Re: Lettore Masterizzatore esterno USB non montato in automatico
pippo@pippo-desktop:~$ tail -f /var/log/messages
Oct 7 13:16:32 pippo-desktop kernel: [ 212.116142] usb 2-1: new full speed USB device using ohci_hcd and address 68
Oct 7 13:16:32 pippo-desktop kernel: [ 212.316923] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:16:32 pippo-desktop kernel: [ 212.335375] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:16:32 pippo-desktop kernel: [ 212.372342] scsi69 : SCSI emulation for USB Mass Storage devices
Oct 7 13:16:34 pippo-desktop kernel: [ 214.527459] usb 2-1: USB disconnect, address 68
Oct 7 13:16:35 pippo-desktop kernel: [ 215.304114] usb 2-1: new full speed USB device using ohci_hcd and address 69
Oct 7 13:16:35 pippo-desktop kernel: [ 215.505318] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:16:35 pippo-desktop kernel: [ 215.525211] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:16:35 pippo-desktop kernel: [ 215.554848] scsi70 : SCSI emulation for USB Mass Storage devices
Oct 7 13:16:36 pippo-desktop kernel: [ 216.839863] usb 2-1: USB disconnect, address 69
Oct 7 13:17:11 pippo-desktop kernel: [ 251.844149] usb 2-1: new full speed USB device using ohci_hcd and address 70
Oct 7 13:17:11 pippo-desktop kernel: [ 252.044327] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:17:12 pippo-desktop kernel: [ 252.064419] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:17:12 pippo-desktop kernel: [ 252.095934] scsi71 : SCSI emulation for USB Mass Storage devices
Oct 7 13:17:14 pippo-desktop kernel: [ 254.188453] usb 2-1: USB disconnect, address 70
Oct 7 13:17:14 pippo-desktop kernel: [ 254.964149] usb 2-1: new full speed USB device using ohci_hcd and address 71
Oct 7 13:17:15 pippo-desktop kernel: [ 255.164688] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:17:15 pippo-desktop kernel: [ 255.183140] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:17:15 pippo-desktop kernel: [ 255.213550] scsi72 : SCSI emulation for USB Mass Storage devices
Oct 7 13:17:17 pippo-desktop kernel: [ 257.378535] usb 2-1: USB disconnect, address 71
Oct 7 13:17:18 pippo-desktop kernel: [ 258.152129] usb 2-1: new full speed USB device using ohci_hcd and address 72
Oct 7 13:17:18 pippo-desktop kernel: [ 258.354112] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:17:18 pippo-desktop kernel: [ 258.374183] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:17:18 pippo-desktop kernel: [ 258.407891] scsi73 : SCSI emulation for USB Mass Storage devices
Oct 7 13:17:20 pippo-desktop kernel: [ 260.565391] usb 2-1: USB disconnect, address 72
Oct 7 13:17:21 pippo-desktop kernel: [ 261.340103] usb 2-1: new full speed USB device using ohci_hcd and address 73
Oct 7 13:17:21 pippo-desktop kernel: [ 261.540458] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:17:21 pippo-desktop kernel: [ 261.558886] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:17:21 pippo-desktop kernel: [ 261.585533] scsi74 : SCSI emulation for USB Mass Storage devices
Oct 7 13:17:23 pippo-desktop kernel: [ 263.759357] usb 2-1: USB disconnect, address 73
Oct 7 13:17:24 pippo-desktop kernel: [ 264.536096] usb 2-1: new full speed USB device using ohci_hcd and address 74
Oct 7 13:17:24 pippo-desktop kernel: [ 264.736914] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:17:24 pippo-desktop kernel: [ 264.756787] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:17:24 pippo-desktop kernel: [ 264.788213] scsi75 : SCSI emulation for USB Mass Storage devices
Oct 7 13:17:26 pippo-desktop kernel: [ 266.953597] usb 2-1: USB disconnect, address 74
Oct 7 13:17:27 pippo-desktop kernel: [ 267.728114] usb 2-1: new full speed USB device using ohci_hcd and address 75
Oct 7 13:17:27 pippo-desktop kernel: [ 267.928231] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:17:27 pippo-desktop kernel: [ 267.946629] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:17:27 pippo-desktop kernel: [ 267.977972] scsi76 : SCSI emulation for USB Mass Storage devices
Oct 7 13:17:30 pippo-desktop kernel: [ 270.154090] usb 2-1: USB disconnect, address 75
Oct 7 13:17:30 pippo-desktop kernel: [ 270.928116] usb 2-1: new full speed USB device using ohci_hcd and address 76
Oct 7 13:17:31 pippo-desktop kernel: [ 271.128669] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:17:31 pippo-desktop kernel: [ 271.147096] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:17:31 pippo-desktop kernel: [ 271.180552] scsi77 : SCSI emulation for USB Mass Storage devices
Oct 7 13:17:33 pippo-desktop kernel: [ 273.335542] usb 2-1: USB disconnect, address 76
Oct 7 13:17:34 pippo-desktop kernel: [ 274.112090] usb 2-1: new full speed USB device using ohci_hcd and address 77
Oct 7 13:17:34 pippo-desktop kernel: [ 274.313012] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:17:34 pippo-desktop kernel: [ 274.331421] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:17:34 pippo-desktop kernel: [ 274.374351] scsi78 : SCSI emulation for USB Mass Storage devices
Oct 7 13:17:36 pippo-desktop kernel: [ 276.535089] usb 2-1: USB disconnect, address 77
Oct 7 13:17:37 pippo-desktop kernel: [ 277.312472] usb 2-1: new full speed USB device using ohci_hcd and address 78
Oct 7 13:17:37 pippo-desktop kernel: [ 277.512454] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:17:37 pippo-desktop kernel: [ 277.530831] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:17:37 pippo-desktop kernel: [ 277.561378] scsi79 : SCSI emulation for USB Mass Storage devices
Oct 7 13:17:39 pippo-desktop kernel: [ 279.695483] usb 2-1: USB disconnect, address 78
Oct 7 13:17:40 pippo-desktop kernel: [ 280.472420] usb 2-1: new full speed USB device using ohci_hcd and address 79
Oct 7 13:17:40 pippo-desktop kernel: [ 280.672854] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:17:40 pippo-desktop kernel: [ 280.691225] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:17:40 pippo-desktop kernel: [ 280.724708] scsi80 : SCSI emulation for USB Mass Storage devices
Oct 7 13:17:42 pippo-desktop kernel: [ 282.902103] usb 2-1: USB disconnect, address 79
Oct 7 13:17:44 pippo-desktop kernel: [ 284.072378] usb 2-1: new full speed USB device using ohci_hcd and address 80
Oct 7 13:17:44 pippo-desktop kernel: [ 284.272365] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:17:44 pippo-desktop kernel: [ 284.290740] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:17:44 pippo-desktop kernel: [ 284.324267] scsi81 : SCSI emulation for USB Mass Storage devices
Oct 7 13:17:46 pippo-desktop kernel: [ 286.474099] usb 2-1: USB disconnect, address 80
Oct 7 13:17:47 pippo-desktop kernel: [ 287.248156] usb 2-1: new full speed USB device using ohci_hcd and address 81
Oct 7 13:17:47 pippo-desktop kernel: [ 287.450807] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:17:47 pippo-desktop kernel: [ 287.469197] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:17:47 pippo-desktop kernel: [ 287.487476] scsi82 : SCSI emulation for USB Mass Storage devices
Oct 7 13:17:49 pippo-desktop kernel: [ 289.667191] usb 2-1: USB disconnect, address 81
Oct 7 13:17:50 pippo-desktop kernel: [ 290.444175] usb 2-1: new full speed USB device using ohci_hcd and address 82
Oct 7 13:17:50 pippo-desktop kernel: [ 290.645182] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:17:50 pippo-desktop kernel: [ 290.664682] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:17:50 pippo-desktop kernel: [ 290.701336] scsi83 : SCSI emulation for USB Mass Storage devices
Oct 7 13:17:52 pippo-desktop kernel: [ 292.844346] usb 2-1: USB disconnect, address 82
Oct 7 13:17:53 pippo-desktop kernel: [ 293.620200] usb 2-1: new full speed USB device using ohci_hcd and address 83
Oct 7 13:17:53 pippo-desktop kernel: [ 293.820502] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:17:53 pippo-desktop kernel: [ 293.838930] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:17:53 pippo-desktop kernel: [ 293.871391] scsi84 : SCSI emulation for USB Mass Storage devices
Oct 7 13:17:55 pippo-desktop kernel: [ 296.005183] usb 2-1: USB disconnect, address 83
Oct 7 13:17:56 pippo-desktop kernel: [ 296.780115] usb 2-1: new full speed USB device using ohci_hcd and address 84
Oct 7 13:17:56 pippo-desktop kernel: [ 296.980949] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:17:56 pippo-desktop kernel: [ 296.999453] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:17:56 pippo-desktop kernel: [ 297.031728] scsi85 : SCSI emulation for USB Mass Storage devices
Oct 7 13:17:59 pippo-desktop kernel: [ 299.192415] usb 2-1: USB disconnect, address 84
Oct 7 13:17:59 pippo-desktop kernel: [ 299.968328] usb 2-1: new full speed USB device using ohci_hcd and address 85
Oct 7 13:18:00 pippo-desktop kernel: [ 300.168260] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:18:00 pippo-desktop kernel: [ 300.189594] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:18:00 pippo-desktop kernel: [ 300.218571] scsi86 : SCSI emulation for USB Mass Storage devices
Oct 7 13:18:02 pippo-desktop kernel: [ 302.377670] usb 2-1: USB disconnect, address 85
Oct 7 13:18:03 pippo-desktop kernel: [ 303.152125] usb 2-1: new full speed USB device using ohci_hcd and address 86
Oct 7 13:18:03 pippo-desktop kernel: [ 303.352647] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:18:03 pippo-desktop kernel: [ 303.372083] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:18:03 pippo-desktop kernel: [ 303.390872] scsi87 : SCSI emulation for USB Mass Storage devices
Oct 7 13:18:05 pippo-desktop kernel: [ 305.546890] usb 2-1: USB disconnect, address 86
Oct 7 13:18:06 pippo-desktop kernel: [ 306.324172] usb 2-1: new full speed USB device using ohci_hcd and address 87
Oct 7 13:18:06 pippo-desktop kernel: [ 306.525026] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:18:06 pippo-desktop kernel: [ 306.545087] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:18:06 pippo-desktop kernel: [ 306.576890] scsi88 : SCSI emulation for USB Mass Storage devices
Oct 7 13:18:08 pippo-desktop kernel: [ 308.732894] usb 2-1: USB disconnect, address 87
Oct 7 13:18:09 pippo-desktop kernel: [ 309.508146] usb 2-1: new full speed USB device using ohci_hcd and address 88
Oct 7 13:18:09 pippo-desktop kernel: [ 309.708411] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:18:09 pippo-desktop kernel: [ 309.726812] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:18:09 pippo-desktop kernel: [ 309.759813] scsi89 : SCSI emulation for USB Mass Storage devices
Oct 7 13:18:11 pippo-desktop kernel: [ 311.928253] usb 2-1: USB disconnect, address 88
Oct 7 13:18:12 pippo-desktop kernel: [ 312.704178] usb 2-1: new full speed USB device using ohci_hcd and address 89
Oct 7 13:18:12 pippo-desktop kernel: [ 312.905613] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:18:12 pippo-desktop kernel: [ 312.923275] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:18:12 pippo-desktop kernel: [ 312.955998] scsi90 : SCSI emulation for USB Mass Storage devices
Oct 7 13:18:15 pippo-desktop kernel: [ 315.112797] usb 2-1: USB disconnect, address 89
Oct 7 13:18:15 pippo-desktop kernel: [ 315.888160] usb 2-1: new full speed USB device using ohci_hcd and address 90
Oct 7 13:18:16 pippo-desktop kernel: [ 316.089239] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:18:16 pippo-desktop kernel: [ 316.111143] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:18:16 pippo-desktop kernel: [ 316.154784] scsi91 : SCSI emulation for USB Mass Storage devices
Oct 7 13:18:18 pippo-desktop kernel: [ 318.272181] usb 2-1: USB disconnect, address 90
Oct 7 13:18:18 pippo-desktop kernel: [ 319.048118] usb 2-1: new full speed USB device using ohci_hcd and address 91
Oct 7 13:18:19 pippo-desktop kernel: [ 319.248565] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:18:19 pippo-desktop kernel: [ 319.266975] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:18:19 pippo-desktop kernel: [ 319.304412] scsi92 : SCSI emulation for USB Mass Storage devices
Oct 7 13:18:21 pippo-desktop kernel: [ 321.456840] usb 2-1: USB disconnect, address 91
Oct 7 13:18:22 pippo-desktop kernel: [ 322.232170] usb 2-1: new full speed USB device using ohci_hcd and address 92
Oct 7 13:18:22 pippo-desktop kernel: [ 322.432989] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:18:22 pippo-desktop kernel: [ 322.453075] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:18:22 pippo-desktop kernel: [ 322.488144] scsi93 : SCSI emulation for USB Mass Storage devices
Oct 7 13:18:24 pippo-desktop kernel: [ 324.615497] usb 2-1: USB disconnect, address 92
Oct 7 13:18:25 pippo-desktop kernel: [ 325.392147] usb 2-1: new full speed USB device using ohci_hcd and address 93
Oct 7 13:18:25 pippo-desktop kernel: [ 325.593373] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:18:25 pippo-desktop kernel: [ 325.611802] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:18:25 pippo-desktop kernel: [ 325.643374] scsi94 : SCSI emulation for USB Mass Storage devices
Oct 7 13:18:27 pippo-desktop kernel: [ 327.795771] usb 2-1: USB disconnect, address 93
Oct 7 13:18:28 pippo-desktop kernel: [ 328.572190] usb 2-1: new full speed USB device using ohci_hcd and address 94
Oct 7 13:18:28 pippo-desktop kernel: [ 328.772758] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:18:28 pippo-desktop kernel: [ 328.791106] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:18:28 pippo-desktop kernel: [ 328.825564] scsi95 : SCSI emulation for USB Mass Storage devices
Oct 7 13:18:30 pippo-desktop kernel: [ 330.952645] usb 2-1: USB disconnect, address 94
Oct 7 13:18:31 pippo-desktop kernel: [ 331.728161] usb 2-1: new full speed USB device using ohci_hcd and address 95
Oct 7 13:18:31 pippo-desktop kernel: [ 331.929465] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:18:31 pippo-desktop kernel: [ 331.949016] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:18:31 pippo-desktop kernel: [ 331.980115] scsi96 : SCSI emulation for USB Mass Storage devices
Oct 7 13:18:34 pippo-desktop kernel: [ 334.113415] usb 2-1: USB disconnect, address 95
Oct 7 13:18:34 pippo-desktop kernel: [ 334.888120] usb 2-1: new full speed USB device using ohci_hcd and address 96
Oct 7 13:18:35 pippo-desktop kernel: [ 335.088464] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:18:35 pippo-desktop kernel: [ 335.108424] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:18:35 pippo-desktop kernel: [ 335.144884] scsi97 : SCSI emulation for USB Mass Storage devices
Oct 7 13:18:37 pippo-desktop kernel: [ 337.290049] usb 2-1: USB disconnect, address 96
Oct 7 13:18:38 pippo-desktop kernel: [ 338.064403] usb 2-1: new full speed USB device using ohci_hcd and address 97
Oct 7 13:18:38 pippo-desktop kernel: [ 338.265936] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:18:38 pippo-desktop kernel: [ 338.285900] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:18:38 pippo-desktop kernel: [ 338.316514] scsi98 : SCSI emulation for USB Mass Storage devices
Oct 7 13:18:40 pippo-desktop kernel: [ 340.467020] usb 2-1: USB disconnect, address 97
Oct 7 13:18:41 pippo-desktop kernel: [ 341.244230] usb 2-1: new full speed USB device using ohci_hcd and address 98
Oct 7 13:18:41 pippo-desktop kernel: [ 341.444276] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:18:41 pippo-desktop kernel: [ 341.462731] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:18:41 pippo-desktop kernel: [ 341.501860] scsi99 : SCSI emulation for USB Mass Storage devices
Oct 7 13:18:43 pippo-desktop kernel: [ 343.658275] usb 2-1: USB disconnect, address 98
Oct 7 13:18:44 pippo-desktop kernel: [ 344.432257] usb 2-1: new full speed USB device using ohci_hcd and address 99
Oct 7 13:18:44 pippo-desktop kernel: [ 344.632668] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:18:44 pippo-desktop kernel: [ 344.652669] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:18:44 pippo-desktop kernel: [ 344.676870] scsi100 : SCSI emulation for USB Mass Storage devices
Oct 7 13:18:46 pippo-desktop kernel: [ 346.827851] usb 2-1: USB disconnect, address 99
Oct 7 13:18:47 pippo-desktop kernel: [ 347.604117] usb 2-1: new full speed USB device using ohci_hcd and address 100
Oct 7 13:18:47 pippo-desktop kernel: [ 347.804997] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:18:47 pippo-desktop kernel: [ 347.823422] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:18:47 pippo-desktop kernel: [ 347.854287] scsi101 : SCSI emulation for USB Mass Storage devices
Oct 7 13:18:49 pippo-desktop kernel: [ 350.019305] usb 2-1: USB disconnect, address 100
Oct 7 13:18:50 pippo-desktop kernel: [ 350.796664] usb 2-1: new full speed USB device using ohci_hcd and address 101
Oct 7 13:18:50 pippo-desktop kernel: [ 350.996453] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:18:50 pippo-desktop kernel: [ 351.014836] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:18:50 pippo-desktop kernel: [ 351.051034] scsi102 : SCSI emulation for USB Mass Storage devices
Oct 7 13:18:53 pippo-desktop kernel: [ 353.177976] usb 2-1: USB disconnect, address 101
Oct 7 13:18:53 pippo-desktop kernel: [ 353.952098] usb 2-1: new full speed USB device using ohci_hcd and address 102
Oct 7 13:18:54 pippo-desktop kernel: [ 354.152769] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:18:54 pippo-desktop kernel: [ 354.171153] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:18:54 pippo-desktop kernel: [ 354.208368] scsi103 : SCSI emulation for USB Mass Storage devices
Oct 7 13:18:56 pippo-desktop kernel: [ 356.354969] usb 2-1: USB disconnect, address 102
Oct 7 13:18:57 pippo-desktop kernel: [ 357.132147] usb 2-1: new full speed USB device using ohci_hcd and address 103
Oct 7 13:18:57 pippo-desktop kernel: [ 357.333185] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:18:57 pippo-desktop kernel: [ 357.353249] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:18:57 pippo-desktop kernel: [ 357.397355] scsi104 : SCSI emulation for USB Mass Storage devices
Oct 7 13:18:59 pippo-desktop kernel: [ 359.534059] usb 2-1: USB disconnect, address 103
Oct 7 13:19:00 pippo-desktop kernel: [ 360.308158] usb 2-1: new full speed USB device using ohci_hcd and address 104
Oct 7 13:19:00 pippo-desktop kernel: [ 360.508564] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:19:00 pippo-desktop kernel: [ 360.526949] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:19:00 pippo-desktop kernel: [ 360.564888] scsi105 : SCSI emulation for USB Mass Storage devices
Oct 7 13:19:02 pippo-desktop kernel: [ 362.715831] usb 2-1: USB disconnect, address 104
Oct 7 13:19:03 pippo-desktop kernel: [ 363.492152] usb 2-1: new full speed USB device using ohci_hcd and address 105
Oct 7 13:19:03 pippo-desktop kernel: [ 363.692905] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:19:03 pippo-desktop kernel: [ 363.712950] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:19:03 pippo-desktop kernel: [ 363.743299] scsi106 : SCSI emulation for USB Mass Storage devices
Oct 7 13:19:05 pippo-desktop kernel: [ 365.896865] usb 2-1: USB disconnect, address 105
Oct 7 13:19:06 pippo-desktop kernel: [ 366.672201] usb 2-1: new full speed USB device using ohci_hcd and address 106
Oct 7 13:19:06 pippo-desktop kernel: [ 366.872339] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:19:06 pippo-desktop kernel: [ 366.892349] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:19:06 pippo-desktop kernel: [ 366.924748] scsi107 : SCSI emulation for USB Mass Storage devices
Oct 7 13:19:08 pippo-desktop kernel: [ 369.056277] usb 2-1: USB disconnect, address 106
Oct 7 13:19:09 pippo-desktop kernel: [ 369.833187] usb 2-1: new full speed USB device using ohci_hcd and address 107
Oct 7 13:19:09 pippo-desktop kernel: [ 370.032664] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:19:09 pippo-desktop kernel: [ 370.052614] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:19:10 pippo-desktop kernel: [ 370.084276] scsi108 : SCSI emulation for USB Mass Storage devices
Oct 7 13:19:12 pippo-desktop kernel: [ 372.262000] usb 2-1: USB disconnect, address 107
Oct 7 13:19:12 pippo-desktop kernel: [ 373.036203] usb 2-1: new full speed USB device using ohci_hcd and address 108
Oct 7 13:19:13 pippo-desktop kernel: [ 373.237133] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:19:13 pippo-desktop kernel: [ 373.255498] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:19:13 pippo-desktop kernel: [ 373.295648] scsi109 : SCSI emulation for USB Mass Storage devices
Oct 7 13:19:15 pippo-desktop kernel: [ 375.460817] usb 2-1: USB disconnect, address 108
Oct 7 13:19:16 pippo-desktop kernel: [ 376.236133] usb 2-1: new full speed USB device using ohci_hcd and address 109
Oct 7 13:19:16 pippo-desktop kernel: [ 376.436451] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:19:16 pippo-desktop kernel: [ 376.454945] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:19:16 pippo-desktop kernel: [ 376.488226] scsi110 : SCSI emulation for USB Mass Storage devices
Oct 7 13:19:18 pippo-desktop kernel: [ 378.644888] usb 2-1: USB disconnect, address 109
Oct 7 13:19:19 pippo-desktop kernel: [ 379.420179] usb 2-1: new full speed USB device using ohci_hcd and address 110
Oct 7 13:19:19 pippo-desktop kernel: [ 379.620876] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:19:19 pippo-desktop kernel: [ 379.639238] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:19:19 pippo-desktop kernel: [ 379.676672] scsi111 : SCSI emulation for USB Mass Storage devices
Oct 7 13:19:21 pippo-desktop kernel: [ 381.812107] usb 2-1: USB disconnect, address 110
Oct 7 13:19:22 pippo-desktop kernel: [ 382.588214] usb 2-1: new full speed USB device using ohci_hcd and address 111
Oct 7 13:19:22 pippo-desktop kernel: [ 382.788944] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:19:22 pippo-desktop kernel: [ 382.806691] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:19:22 pippo-desktop kernel: [ 382.844248] scsi112 : SCSI emulation for USB Mass Storage devices
Oct 7 13:19:24 pippo-desktop kernel: [ 385.023811] usb 2-1: USB disconnect, address 111
Oct 7 13:19:25 pippo-desktop kernel: [ 385.800151] usb 2-1: new full speed USB device using ohci_hcd and address 112
Oct 7 13:19:25 pippo-desktop kernel: [ 386.000894] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:19:25 pippo-desktop kernel: [ 386.019024] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:19:25 pippo-desktop kernel: [ 386.057698] scsi113 : SCSI emulation for USB Mass Storage devices
^C
pippo@pippo-desktop:~$
continua senza fermarsi lo ho bloccato
Oct 7 13:16:32 pippo-desktop kernel: [ 212.116142] usb 2-1: new full speed USB device using ohci_hcd and address 68
Oct 7 13:16:32 pippo-desktop kernel: [ 212.316923] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:16:32 pippo-desktop kernel: [ 212.335375] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:16:32 pippo-desktop kernel: [ 212.372342] scsi69 : SCSI emulation for USB Mass Storage devices
Oct 7 13:16:34 pippo-desktop kernel: [ 214.527459] usb 2-1: USB disconnect, address 68
Oct 7 13:16:35 pippo-desktop kernel: [ 215.304114] usb 2-1: new full speed USB device using ohci_hcd and address 69
Oct 7 13:16:35 pippo-desktop kernel: [ 215.505318] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:16:35 pippo-desktop kernel: [ 215.525211] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:16:35 pippo-desktop kernel: [ 215.554848] scsi70 : SCSI emulation for USB Mass Storage devices
Oct 7 13:16:36 pippo-desktop kernel: [ 216.839863] usb 2-1: USB disconnect, address 69
Oct 7 13:17:11 pippo-desktop kernel: [ 251.844149] usb 2-1: new full speed USB device using ohci_hcd and address 70
Oct 7 13:17:11 pippo-desktop kernel: [ 252.044327] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:17:12 pippo-desktop kernel: [ 252.064419] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:17:12 pippo-desktop kernel: [ 252.095934] scsi71 : SCSI emulation for USB Mass Storage devices
Oct 7 13:17:14 pippo-desktop kernel: [ 254.188453] usb 2-1: USB disconnect, address 70
Oct 7 13:17:14 pippo-desktop kernel: [ 254.964149] usb 2-1: new full speed USB device using ohci_hcd and address 71
Oct 7 13:17:15 pippo-desktop kernel: [ 255.164688] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:17:15 pippo-desktop kernel: [ 255.183140] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:17:15 pippo-desktop kernel: [ 255.213550] scsi72 : SCSI emulation for USB Mass Storage devices
Oct 7 13:17:17 pippo-desktop kernel: [ 257.378535] usb 2-1: USB disconnect, address 71
Oct 7 13:17:18 pippo-desktop kernel: [ 258.152129] usb 2-1: new full speed USB device using ohci_hcd and address 72
Oct 7 13:17:18 pippo-desktop kernel: [ 258.354112] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:17:18 pippo-desktop kernel: [ 258.374183] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:17:18 pippo-desktop kernel: [ 258.407891] scsi73 : SCSI emulation for USB Mass Storage devices
Oct 7 13:17:20 pippo-desktop kernel: [ 260.565391] usb 2-1: USB disconnect, address 72
Oct 7 13:17:21 pippo-desktop kernel: [ 261.340103] usb 2-1: new full speed USB device using ohci_hcd and address 73
Oct 7 13:17:21 pippo-desktop kernel: [ 261.540458] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:17:21 pippo-desktop kernel: [ 261.558886] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:17:21 pippo-desktop kernel: [ 261.585533] scsi74 : SCSI emulation for USB Mass Storage devices
Oct 7 13:17:23 pippo-desktop kernel: [ 263.759357] usb 2-1: USB disconnect, address 73
Oct 7 13:17:24 pippo-desktop kernel: [ 264.536096] usb 2-1: new full speed USB device using ohci_hcd and address 74
Oct 7 13:17:24 pippo-desktop kernel: [ 264.736914] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:17:24 pippo-desktop kernel: [ 264.756787] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:17:24 pippo-desktop kernel: [ 264.788213] scsi75 : SCSI emulation for USB Mass Storage devices
Oct 7 13:17:26 pippo-desktop kernel: [ 266.953597] usb 2-1: USB disconnect, address 74
Oct 7 13:17:27 pippo-desktop kernel: [ 267.728114] usb 2-1: new full speed USB device using ohci_hcd and address 75
Oct 7 13:17:27 pippo-desktop kernel: [ 267.928231] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:17:27 pippo-desktop kernel: [ 267.946629] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:17:27 pippo-desktop kernel: [ 267.977972] scsi76 : SCSI emulation for USB Mass Storage devices
Oct 7 13:17:30 pippo-desktop kernel: [ 270.154090] usb 2-1: USB disconnect, address 75
Oct 7 13:17:30 pippo-desktop kernel: [ 270.928116] usb 2-1: new full speed USB device using ohci_hcd and address 76
Oct 7 13:17:31 pippo-desktop kernel: [ 271.128669] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:17:31 pippo-desktop kernel: [ 271.147096] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:17:31 pippo-desktop kernel: [ 271.180552] scsi77 : SCSI emulation for USB Mass Storage devices
Oct 7 13:17:33 pippo-desktop kernel: [ 273.335542] usb 2-1: USB disconnect, address 76
Oct 7 13:17:34 pippo-desktop kernel: [ 274.112090] usb 2-1: new full speed USB device using ohci_hcd and address 77
Oct 7 13:17:34 pippo-desktop kernel: [ 274.313012] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:17:34 pippo-desktop kernel: [ 274.331421] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:17:34 pippo-desktop kernel: [ 274.374351] scsi78 : SCSI emulation for USB Mass Storage devices
Oct 7 13:17:36 pippo-desktop kernel: [ 276.535089] usb 2-1: USB disconnect, address 77
Oct 7 13:17:37 pippo-desktop kernel: [ 277.312472] usb 2-1: new full speed USB device using ohci_hcd and address 78
Oct 7 13:17:37 pippo-desktop kernel: [ 277.512454] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:17:37 pippo-desktop kernel: [ 277.530831] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:17:37 pippo-desktop kernel: [ 277.561378] scsi79 : SCSI emulation for USB Mass Storage devices
Oct 7 13:17:39 pippo-desktop kernel: [ 279.695483] usb 2-1: USB disconnect, address 78
Oct 7 13:17:40 pippo-desktop kernel: [ 280.472420] usb 2-1: new full speed USB device using ohci_hcd and address 79
Oct 7 13:17:40 pippo-desktop kernel: [ 280.672854] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:17:40 pippo-desktop kernel: [ 280.691225] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:17:40 pippo-desktop kernel: [ 280.724708] scsi80 : SCSI emulation for USB Mass Storage devices
Oct 7 13:17:42 pippo-desktop kernel: [ 282.902103] usb 2-1: USB disconnect, address 79
Oct 7 13:17:44 pippo-desktop kernel: [ 284.072378] usb 2-1: new full speed USB device using ohci_hcd and address 80
Oct 7 13:17:44 pippo-desktop kernel: [ 284.272365] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:17:44 pippo-desktop kernel: [ 284.290740] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:17:44 pippo-desktop kernel: [ 284.324267] scsi81 : SCSI emulation for USB Mass Storage devices
Oct 7 13:17:46 pippo-desktop kernel: [ 286.474099] usb 2-1: USB disconnect, address 80
Oct 7 13:17:47 pippo-desktop kernel: [ 287.248156] usb 2-1: new full speed USB device using ohci_hcd and address 81
Oct 7 13:17:47 pippo-desktop kernel: [ 287.450807] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:17:47 pippo-desktop kernel: [ 287.469197] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:17:47 pippo-desktop kernel: [ 287.487476] scsi82 : SCSI emulation for USB Mass Storage devices
Oct 7 13:17:49 pippo-desktop kernel: [ 289.667191] usb 2-1: USB disconnect, address 81
Oct 7 13:17:50 pippo-desktop kernel: [ 290.444175] usb 2-1: new full speed USB device using ohci_hcd and address 82
Oct 7 13:17:50 pippo-desktop kernel: [ 290.645182] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:17:50 pippo-desktop kernel: [ 290.664682] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:17:50 pippo-desktop kernel: [ 290.701336] scsi83 : SCSI emulation for USB Mass Storage devices
Oct 7 13:17:52 pippo-desktop kernel: [ 292.844346] usb 2-1: USB disconnect, address 82
Oct 7 13:17:53 pippo-desktop kernel: [ 293.620200] usb 2-1: new full speed USB device using ohci_hcd and address 83
Oct 7 13:17:53 pippo-desktop kernel: [ 293.820502] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:17:53 pippo-desktop kernel: [ 293.838930] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:17:53 pippo-desktop kernel: [ 293.871391] scsi84 : SCSI emulation for USB Mass Storage devices
Oct 7 13:17:55 pippo-desktop kernel: [ 296.005183] usb 2-1: USB disconnect, address 83
Oct 7 13:17:56 pippo-desktop kernel: [ 296.780115] usb 2-1: new full speed USB device using ohci_hcd and address 84
Oct 7 13:17:56 pippo-desktop kernel: [ 296.980949] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:17:56 pippo-desktop kernel: [ 296.999453] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:17:56 pippo-desktop kernel: [ 297.031728] scsi85 : SCSI emulation for USB Mass Storage devices
Oct 7 13:17:59 pippo-desktop kernel: [ 299.192415] usb 2-1: USB disconnect, address 84
Oct 7 13:17:59 pippo-desktop kernel: [ 299.968328] usb 2-1: new full speed USB device using ohci_hcd and address 85
Oct 7 13:18:00 pippo-desktop kernel: [ 300.168260] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:18:00 pippo-desktop kernel: [ 300.189594] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:18:00 pippo-desktop kernel: [ 300.218571] scsi86 : SCSI emulation for USB Mass Storage devices
Oct 7 13:18:02 pippo-desktop kernel: [ 302.377670] usb 2-1: USB disconnect, address 85
Oct 7 13:18:03 pippo-desktop kernel: [ 303.152125] usb 2-1: new full speed USB device using ohci_hcd and address 86
Oct 7 13:18:03 pippo-desktop kernel: [ 303.352647] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:18:03 pippo-desktop kernel: [ 303.372083] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:18:03 pippo-desktop kernel: [ 303.390872] scsi87 : SCSI emulation for USB Mass Storage devices
Oct 7 13:18:05 pippo-desktop kernel: [ 305.546890] usb 2-1: USB disconnect, address 86
Oct 7 13:18:06 pippo-desktop kernel: [ 306.324172] usb 2-1: new full speed USB device using ohci_hcd and address 87
Oct 7 13:18:06 pippo-desktop kernel: [ 306.525026] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:18:06 pippo-desktop kernel: [ 306.545087] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:18:06 pippo-desktop kernel: [ 306.576890] scsi88 : SCSI emulation for USB Mass Storage devices
Oct 7 13:18:08 pippo-desktop kernel: [ 308.732894] usb 2-1: USB disconnect, address 87
Oct 7 13:18:09 pippo-desktop kernel: [ 309.508146] usb 2-1: new full speed USB device using ohci_hcd and address 88
Oct 7 13:18:09 pippo-desktop kernel: [ 309.708411] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:18:09 pippo-desktop kernel: [ 309.726812] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:18:09 pippo-desktop kernel: [ 309.759813] scsi89 : SCSI emulation for USB Mass Storage devices
Oct 7 13:18:11 pippo-desktop kernel: [ 311.928253] usb 2-1: USB disconnect, address 88
Oct 7 13:18:12 pippo-desktop kernel: [ 312.704178] usb 2-1: new full speed USB device using ohci_hcd and address 89
Oct 7 13:18:12 pippo-desktop kernel: [ 312.905613] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:18:12 pippo-desktop kernel: [ 312.923275] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:18:12 pippo-desktop kernel: [ 312.955998] scsi90 : SCSI emulation for USB Mass Storage devices
Oct 7 13:18:15 pippo-desktop kernel: [ 315.112797] usb 2-1: USB disconnect, address 89
Oct 7 13:18:15 pippo-desktop kernel: [ 315.888160] usb 2-1: new full speed USB device using ohci_hcd and address 90
Oct 7 13:18:16 pippo-desktop kernel: [ 316.089239] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:18:16 pippo-desktop kernel: [ 316.111143] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:18:16 pippo-desktop kernel: [ 316.154784] scsi91 : SCSI emulation for USB Mass Storage devices
Oct 7 13:18:18 pippo-desktop kernel: [ 318.272181] usb 2-1: USB disconnect, address 90
Oct 7 13:18:18 pippo-desktop kernel: [ 319.048118] usb 2-1: new full speed USB device using ohci_hcd and address 91
Oct 7 13:18:19 pippo-desktop kernel: [ 319.248565] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:18:19 pippo-desktop kernel: [ 319.266975] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:18:19 pippo-desktop kernel: [ 319.304412] scsi92 : SCSI emulation for USB Mass Storage devices
Oct 7 13:18:21 pippo-desktop kernel: [ 321.456840] usb 2-1: USB disconnect, address 91
Oct 7 13:18:22 pippo-desktop kernel: [ 322.232170] usb 2-1: new full speed USB device using ohci_hcd and address 92
Oct 7 13:18:22 pippo-desktop kernel: [ 322.432989] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:18:22 pippo-desktop kernel: [ 322.453075] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:18:22 pippo-desktop kernel: [ 322.488144] scsi93 : SCSI emulation for USB Mass Storage devices
Oct 7 13:18:24 pippo-desktop kernel: [ 324.615497] usb 2-1: USB disconnect, address 92
Oct 7 13:18:25 pippo-desktop kernel: [ 325.392147] usb 2-1: new full speed USB device using ohci_hcd and address 93
Oct 7 13:18:25 pippo-desktop kernel: [ 325.593373] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:18:25 pippo-desktop kernel: [ 325.611802] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:18:25 pippo-desktop kernel: [ 325.643374] scsi94 : SCSI emulation for USB Mass Storage devices
Oct 7 13:18:27 pippo-desktop kernel: [ 327.795771] usb 2-1: USB disconnect, address 93
Oct 7 13:18:28 pippo-desktop kernel: [ 328.572190] usb 2-1: new full speed USB device using ohci_hcd and address 94
Oct 7 13:18:28 pippo-desktop kernel: [ 328.772758] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:18:28 pippo-desktop kernel: [ 328.791106] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:18:28 pippo-desktop kernel: [ 328.825564] scsi95 : SCSI emulation for USB Mass Storage devices
Oct 7 13:18:30 pippo-desktop kernel: [ 330.952645] usb 2-1: USB disconnect, address 94
Oct 7 13:18:31 pippo-desktop kernel: [ 331.728161] usb 2-1: new full speed USB device using ohci_hcd and address 95
Oct 7 13:18:31 pippo-desktop kernel: [ 331.929465] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:18:31 pippo-desktop kernel: [ 331.949016] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:18:31 pippo-desktop kernel: [ 331.980115] scsi96 : SCSI emulation for USB Mass Storage devices
Oct 7 13:18:34 pippo-desktop kernel: [ 334.113415] usb 2-1: USB disconnect, address 95
Oct 7 13:18:34 pippo-desktop kernel: [ 334.888120] usb 2-1: new full speed USB device using ohci_hcd and address 96
Oct 7 13:18:35 pippo-desktop kernel: [ 335.088464] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:18:35 pippo-desktop kernel: [ 335.108424] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:18:35 pippo-desktop kernel: [ 335.144884] scsi97 : SCSI emulation for USB Mass Storage devices
Oct 7 13:18:37 pippo-desktop kernel: [ 337.290049] usb 2-1: USB disconnect, address 96
Oct 7 13:18:38 pippo-desktop kernel: [ 338.064403] usb 2-1: new full speed USB device using ohci_hcd and address 97
Oct 7 13:18:38 pippo-desktop kernel: [ 338.265936] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:18:38 pippo-desktop kernel: [ 338.285900] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:18:38 pippo-desktop kernel: [ 338.316514] scsi98 : SCSI emulation for USB Mass Storage devices
Oct 7 13:18:40 pippo-desktop kernel: [ 340.467020] usb 2-1: USB disconnect, address 97
Oct 7 13:18:41 pippo-desktop kernel: [ 341.244230] usb 2-1: new full speed USB device using ohci_hcd and address 98
Oct 7 13:18:41 pippo-desktop kernel: [ 341.444276] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:18:41 pippo-desktop kernel: [ 341.462731] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:18:41 pippo-desktop kernel: [ 341.501860] scsi99 : SCSI emulation for USB Mass Storage devices
Oct 7 13:18:43 pippo-desktop kernel: [ 343.658275] usb 2-1: USB disconnect, address 98
Oct 7 13:18:44 pippo-desktop kernel: [ 344.432257] usb 2-1: new full speed USB device using ohci_hcd and address 99
Oct 7 13:18:44 pippo-desktop kernel: [ 344.632668] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:18:44 pippo-desktop kernel: [ 344.652669] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:18:44 pippo-desktop kernel: [ 344.676870] scsi100 : SCSI emulation for USB Mass Storage devices
Oct 7 13:18:46 pippo-desktop kernel: [ 346.827851] usb 2-1: USB disconnect, address 99
Oct 7 13:18:47 pippo-desktop kernel: [ 347.604117] usb 2-1: new full speed USB device using ohci_hcd and address 100
Oct 7 13:18:47 pippo-desktop kernel: [ 347.804997] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:18:47 pippo-desktop kernel: [ 347.823422] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:18:47 pippo-desktop kernel: [ 347.854287] scsi101 : SCSI emulation for USB Mass Storage devices
Oct 7 13:18:49 pippo-desktop kernel: [ 350.019305] usb 2-1: USB disconnect, address 100
Oct 7 13:18:50 pippo-desktop kernel: [ 350.796664] usb 2-1: new full speed USB device using ohci_hcd and address 101
Oct 7 13:18:50 pippo-desktop kernel: [ 350.996453] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:18:50 pippo-desktop kernel: [ 351.014836] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:18:50 pippo-desktop kernel: [ 351.051034] scsi102 : SCSI emulation for USB Mass Storage devices
Oct 7 13:18:53 pippo-desktop kernel: [ 353.177976] usb 2-1: USB disconnect, address 101
Oct 7 13:18:53 pippo-desktop kernel: [ 353.952098] usb 2-1: new full speed USB device using ohci_hcd and address 102
Oct 7 13:18:54 pippo-desktop kernel: [ 354.152769] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:18:54 pippo-desktop kernel: [ 354.171153] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:18:54 pippo-desktop kernel: [ 354.208368] scsi103 : SCSI emulation for USB Mass Storage devices
Oct 7 13:18:56 pippo-desktop kernel: [ 356.354969] usb 2-1: USB disconnect, address 102
Oct 7 13:18:57 pippo-desktop kernel: [ 357.132147] usb 2-1: new full speed USB device using ohci_hcd and address 103
Oct 7 13:18:57 pippo-desktop kernel: [ 357.333185] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:18:57 pippo-desktop kernel: [ 357.353249] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:18:57 pippo-desktop kernel: [ 357.397355] scsi104 : SCSI emulation for USB Mass Storage devices
Oct 7 13:18:59 pippo-desktop kernel: [ 359.534059] usb 2-1: USB disconnect, address 103
Oct 7 13:19:00 pippo-desktop kernel: [ 360.308158] usb 2-1: new full speed USB device using ohci_hcd and address 104
Oct 7 13:19:00 pippo-desktop kernel: [ 360.508564] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:19:00 pippo-desktop kernel: [ 360.526949] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:19:00 pippo-desktop kernel: [ 360.564888] scsi105 : SCSI emulation for USB Mass Storage devices
Oct 7 13:19:02 pippo-desktop kernel: [ 362.715831] usb 2-1: USB disconnect, address 104
Oct 7 13:19:03 pippo-desktop kernel: [ 363.492152] usb 2-1: new full speed USB device using ohci_hcd and address 105
Oct 7 13:19:03 pippo-desktop kernel: [ 363.692905] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:19:03 pippo-desktop kernel: [ 363.712950] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:19:03 pippo-desktop kernel: [ 363.743299] scsi106 : SCSI emulation for USB Mass Storage devices
Oct 7 13:19:05 pippo-desktop kernel: [ 365.896865] usb 2-1: USB disconnect, address 105
Oct 7 13:19:06 pippo-desktop kernel: [ 366.672201] usb 2-1: new full speed USB device using ohci_hcd and address 106
Oct 7 13:19:06 pippo-desktop kernel: [ 366.872339] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:19:06 pippo-desktop kernel: [ 366.892349] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:19:06 pippo-desktop kernel: [ 366.924748] scsi107 : SCSI emulation for USB Mass Storage devices
Oct 7 13:19:08 pippo-desktop kernel: [ 369.056277] usb 2-1: USB disconnect, address 106
Oct 7 13:19:09 pippo-desktop kernel: [ 369.833187] usb 2-1: new full speed USB device using ohci_hcd and address 107
Oct 7 13:19:09 pippo-desktop kernel: [ 370.032664] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:19:09 pippo-desktop kernel: [ 370.052614] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:19:10 pippo-desktop kernel: [ 370.084276] scsi108 : SCSI emulation for USB Mass Storage devices
Oct 7 13:19:12 pippo-desktop kernel: [ 372.262000] usb 2-1: USB disconnect, address 107
Oct 7 13:19:12 pippo-desktop kernel: [ 373.036203] usb 2-1: new full speed USB device using ohci_hcd and address 108
Oct 7 13:19:13 pippo-desktop kernel: [ 373.237133] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:19:13 pippo-desktop kernel: [ 373.255498] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:19:13 pippo-desktop kernel: [ 373.295648] scsi109 : SCSI emulation for USB Mass Storage devices
Oct 7 13:19:15 pippo-desktop kernel: [ 375.460817] usb 2-1: USB disconnect, address 108
Oct 7 13:19:16 pippo-desktop kernel: [ 376.236133] usb 2-1: new full speed USB device using ohci_hcd and address 109
Oct 7 13:19:16 pippo-desktop kernel: [ 376.436451] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:19:16 pippo-desktop kernel: [ 376.454945] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:19:16 pippo-desktop kernel: [ 376.488226] scsi110 : SCSI emulation for USB Mass Storage devices
Oct 7 13:19:18 pippo-desktop kernel: [ 378.644888] usb 2-1: USB disconnect, address 109
Oct 7 13:19:19 pippo-desktop kernel: [ 379.420179] usb 2-1: new full speed USB device using ohci_hcd and address 110
Oct 7 13:19:19 pippo-desktop kernel: [ 379.620876] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:19:19 pippo-desktop kernel: [ 379.639238] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:19:19 pippo-desktop kernel: [ 379.676672] scsi111 : SCSI emulation for USB Mass Storage devices
Oct 7 13:19:21 pippo-desktop kernel: [ 381.812107] usb 2-1: USB disconnect, address 110
Oct 7 13:19:22 pippo-desktop kernel: [ 382.588214] usb 2-1: new full speed USB device using ohci_hcd and address 111
Oct 7 13:19:22 pippo-desktop kernel: [ 382.788944] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:19:22 pippo-desktop kernel: [ 382.806691] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:19:22 pippo-desktop kernel: [ 382.844248] scsi112 : SCSI emulation for USB Mass Storage devices
Oct 7 13:19:24 pippo-desktop kernel: [ 385.023811] usb 2-1: USB disconnect, address 111
Oct 7 13:19:25 pippo-desktop kernel: [ 385.800151] usb 2-1: new full speed USB device using ohci_hcd and address 112
Oct 7 13:19:25 pippo-desktop kernel: [ 386.000894] usb 2-1: not running at top speed; connect to a high speed hub
Oct 7 13:19:25 pippo-desktop kernel: [ 386.019024] usb 2-1: configuration #1 chosen from 1 choice
Oct 7 13:19:25 pippo-desktop kernel: [ 386.057698] scsi113 : SCSI emulation for USB Mass Storage devices
^C
pippo@pippo-desktop:~$
continua senza fermarsi lo ho bloccato
Ultima modifica di luna10 il venerdì 7 ottobre 2011, 13:22, modificato 1 volta in totale.
-
krava58
- Prode Principiante
- Messaggi: 76
- Iscrizione: giovedì 14 febbraio 2008, 20:44
- Località: Forlì
- Contatti:
Re: Lettore Masterizzatore esterno USB non montato in automatico
Questo è il miomagozurlinux ha scritto: Con Windows funziona perchè ha il suo driver; con Linux certe volte ci sono problemi, facciamo quest'altra prova:
Da terminale senza il masterizzatore usb inserito dai questo comando:
inserisci il masterizzatore ad una porta usb;Codice: Seleziona tutto
tail -f /var/log/messages
segui l'output dei messaggi emanati dal comando tail -f ....
quando ha terminato di emettere messaggi premi Ctrl c per terminare il comando.
Postami l'output di questi messaggi emessi dal comando tail -f ...
Codice: Seleziona tutto
tail -f /var/log/messages
Oct 7 17:55:17 packard kernel: [ 568.544997] usb 1-1: USB disconnect, address 5
Oct 7 17:55:34 packard kernel: [ 585.884089] usb 1-1: new high speed USB device using ehci_hcd and address 6
Oct 7 17:55:35 packard kernel: [ 586.018876] usb-storage 1-1:1.0: Quirks match for vid 05e3 pid 0701: 520
Oct 7 17:55:35 packard kernel: [ 586.019012] scsi6 : usb-storage 1-1:1.0
Oct 7 17:55:36 packard kernel: [ 587.022710] scsi 6:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S202J SB01 PQ: 0 ANSI: 0
Oct 7 17:55:36 packard kernel: [ 587.029332] sr0: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray
Oct 7 17:55:36 packard kernel: [ 587.032540] sr 6:0:0:0: Attached scsi generic sg2 type 5
Chi c’è in linea
Visualizzano questa sezione: 0 utenti iscritti e 3 ospiti