[Risolto] La Firewire della mia Sony DCR-TRV60E non viene rilevata da Kdenlive

[Sga72]

Ciao amici,

sto provando con ubuntu 11.10 ma niente, non mi va

ho fatto così
da terminale

sudo gedit /etc/udev/rules.d/40-permissions.rules
mi ha aperto un file completaente vuoto e io ho aggiunto queste tre righe

KERNEL=="raw1394", GROUP="disk", MODE="0666"
KERNEL=="dv1394*", GROUP="video", MODE="0666"
KERNEL=="video1394*", GROUP="video", MODE="0666"

poi da terminale
sudo gedit /etc/modules

mi ha aperto un file con poche righe e sotto ho inserito queste tre righe

raw1394
video1394
dv1394

se provo a caricare questi tre moduli
$ sudo modeprobe raw1394
$ sudo modeprobe video1394
$ sudo modeprobe dv1394

la risposta da terminale è negativa
modeprobe: command not found

se infatti avvio l'installazione di Kdenlive mi rileva solo la webcam e non la telecamera.

come posso risolvere?
grazie mille

[cristian_c]

La porta firewire viene rilevata in generale dal sistema? 

[Sga72]

non so come si fa per vedere se la porta viene rilevata

puoi aiutarmi?

[cristian_c]

non so come si fa per vedere se la porta viene rilevata

puoi aiutarmi?

Da terminale digita il comando:

Codice: Seleziona tutto

lspci

e copia qui il risultato all'interno del tag 'code' 

Poi collega la videocamera alla porta e digita subito:

Codice: Seleziona tutto

dmesg

copiando qui il risultato all'interno del tag 'code' 

Inoltre mi sembra che hai seguito in modo confuso una qualche procedura, sbagliando anche i nomi dei comandi. Guarda piuttosto qui: http://ottobitnews.blogspot.com/2009/01/come-rilevare-la-vostra-videocamera-su.html

[Sga72]

grazie mille 

la risposta a lsb è questa

Codice: Seleziona tutto

00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
00:1f.6 Signal processing controller: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation G96 [GeForce 9600M GT] (rev a1)
02:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
06:00.0 FireWire (IEEE 1394): JMicron Technology Corp. IEEE 1394 Host Controller
06:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller
06:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller
06:00.3 System peripheral: JMicron Technology Corp. MS Host Controller
06:00.4 System peripheral: JMicron Technology Corp. xD Host Controller

mentre la risposta a dmesg è questa

Codice: Seleziona tutto

[    0.512056] pci 0000:00:1e.0: setting latency timer to 64
[    0.512061] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.512064] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.512067] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.512070] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff]
[    0.512073] pci_bus 0000:01: resource 0 [io  0x9000-0x9fff]
[    0.512076] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd2ffffff]
[    0.512079] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.512082] pci_bus 0000:02: resource 0 [io  0x8000-0x8fff]
[    0.512084] pci_bus 0000:02: resource 1 [mem 0xde200000-0xdf2fffff]
[    0.512087] pci_bus 0000:02: resource 2 [mem 0xd3000000-0xd3ffffff 64bit pref]
[    0.512090] pci_bus 0000:03: resource 0 [io  0x6000-0x7fff]
[    0.512093] pci_bus 0000:03: resource 1 [mem 0xdd200000-0xde1fffff]
[    0.512096] pci_bus 0000:03: resource 2 [mem 0xd4000000-0xd50fffff 64bit pref]
[    0.512099] pci_bus 0000:04: resource 0 [io  0x5000-0x5fff]
[    0.512101] pci_bus 0000:04: resource 1 [mem 0xdc200000-0xdd1fffff]
[    0.512104] pci_bus 0000:04: resource 2 [mem 0xd5100000-0xd60fffff 64bit pref]
[    0.512107] pci_bus 0000:05: resource 0 [io  0x4000-0x4fff]
[    0.512110] pci_bus 0000:05: resource 1 [mem 0xdb200000-0xdc1fffff]
[    0.512113] pci_bus 0000:05: resource 2 [mem 0xd6100000-0xd70fffff 64bit pref]
[    0.512115] pci_bus 0000:06: resource 0 [io  0x3000-0x3fff]
[    0.512118] pci_bus 0000:06: resource 1 [mem 0xda100000-0xdb1fffff]
[    0.512121] pci_bus 0000:06: resource 2 [mem 0xd7100000-0xd80fffff 64bit pref]
[    0.512124] pci_bus 0000:07: resource 0 [io  0x2000-0x2fff]
[    0.512126] pci_bus 0000:07: resource 1 [mem 0xd9100000-0xda0fffff]
[    0.512129] pci_bus 0000:07: resource 2 [mem 0xd8100000-0xd90fffff 64bit pref]
[    0.512132] pci_bus 0000:0a: resource 4 [io  0x0000-0x0cf7]
[    0.512135] pci_bus 0000:0a: resource 5 [io  0x0d00-0xffff]
[    0.512138] pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff]
[    0.512140] pci_bus 0000:0a: resource 7 [mem 0xc0000000-0xfebfffff]
[    0.512202] NET: Registered protocol family 2
[    0.512290] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.512584] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.513061] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.513292] TCP: Hash tables configured (established 131072 bind 65536)
[    0.513294] TCP reno registered
[    0.513298] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.513307] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.513403] NET: Registered protocol family 1
[    0.513860] pci 0000:01:00.0: Boot video device
[    0.513932] PCI: CLS 64 bytes, default 64
[    0.513939] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[    0.513941] Simple Boot Flag at 0x44 set to 0x1
[    0.514303] audit: initializing netlink socket (disabled)
[    0.514313] type=2000 audit(1319528689.508:1): initialized
[    0.544630] highmem bounce pool size: 64 pages
[    0.544636] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.559329] VFS: Disk quotas dquot_6.5.2
[    0.559410] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.560213] fuse init (API version 7.16)
[    0.560320] msgmni has been set to 1641
[    0.560723] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.560753] io scheduler noop registered
[    0.560755] io scheduler deadline registered
[    0.560771] io scheduler cfq registered (default)
[    0.560926] pcieport 0000:00:01.0: setting latency timer to 64
[    0.560967] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.561045] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.561098] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    0.561194] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.561247] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[    0.561342] pcieport 0000:00:1c.2: setting latency timer to 64
[    0.561395] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
[    0.561488] pcieport 0000:00:1c.3: setting latency timer to 64
[    0.561540] pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X
[    0.561638] pcieport 0000:00:1c.4: setting latency timer to 64
[    0.561690] pcieport 0000:00:1c.4: irq 45 for MSI/MSI-X
[    0.561785] pcieport 0000:00:1c.5: setting latency timer to 64
[    0.561837] pcieport 0000:00:1c.5: irq 46 for MSI/MSI-X
[    0.561956] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[    0.561959] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    0.561964] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[    0.561986] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.561989] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    0.561994] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    0.562019] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[    0.562021] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    0.562027] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[    0.562051] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[    0.562056] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[    0.562083] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[    0.562088] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[    0.562111] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[    0.562114] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
[    0.562116] pci 0000:06:00.1: Signaling PME through PCIe PME interrupt
[    0.562118] pci 0000:06:00.2: Signaling PME through PCIe PME interrupt
[    0.562121] pci 0000:06:00.3: Signaling PME through PCIe PME interrupt
[    0.562123] pci 0000:06:00.4: Signaling PME through PCIe PME interrupt
[    0.562128] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[    0.562151] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[    0.562156] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[    0.562180] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.562210] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.562283] intel_idle: MWAIT substates: 0x22220
[    0.562285] intel_idle: does not run on family 6 model 15
[    0.562586] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.562880] ACPI: AC Adapter [ACAD] (on-line)
[    0.562989] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.562995] ACPI: Power Button [PWRB]
[    0.563046] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    0.563412] ACPI: Lid Switch [LID0]
[    0.563460] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[    0.563464] ACPI: Sleep Button [SLPB]
[    0.563528] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.563532] ACPI: Power Button [PWRF]
[    0.563568] ACPI: acpi_idle registered with cpuidle
[    0.563782] Monitor-Mwait will be used to enter C-1 state
[    0.563813] Monitor-Mwait will be used to enter C-2 state
[    0.563821] Marking TSC unstable due to TSC halts in idle
[    0.567665] [Firmware Bug]: Invalid critical threshold (0)
[    0.568204] thermal LNXTHERM:00: registered as thermal_zone0
[    0.568207] ACPI: Thermal Zone [TZ01] (27 C)
[    0.568227] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.568258] ERST: Table is not found!
[    0.568306] isapnp: Scanning for PnP cards...
[    0.568340] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.568491] ACPI: Battery Slot [BAT0] (battery absent)
[    0.923659] isapnp: No Plug & Play device found
[    0.929656] Linux agpgart interface v0.103
[    0.931314] brd: module loaded
[    0.931977] loop: module loaded
[    0.932571] Fixed MDIO Bus: probed
[    0.932598] PPP generic driver version 2.4.2
[    0.932636] tun: Universal TUN/TAP device driver, 1.6
[    0.932638] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.932730] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.932749] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.932763] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.932768] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.932812] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.932843] ehci_hcd 0000:00:1a.7: debug port 1
[    0.936741] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[    0.936761] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xdf305c00
[    0.952015] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.952139] hub 1-0:1.0: USB hub found
[    0.952144] hub 1-0:1.0: 4 ports detected
[    0.952239] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.952252] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.952256] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.952293] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.952321] ehci_hcd 0000:00:1d.7: debug port 1
[    0.956211] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    0.956229] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xdf305800
[    0.972015] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.972150] hub 2-0:1.0: USB hub found
[    0.972154] hub 2-0:1.0: 8 ports detected
[    0.972251] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.972268] uhci_hcd: USB Universal Host Controller Interface driver
[    0.972291] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.972299] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.972302] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.972339] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.972377] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a0e0
[    0.972512] hub 3-0:1.0: USB hub found
[    0.972517] hub 3-0:1.0: 2 ports detected
[    0.972599] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.972607] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.972610] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.972652] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.972689] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a0c0
[    0.972819] hub 4-0:1.0: USB hub found
[    0.972823] hub 4-0:1.0: 2 ports detected
[    0.972901] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.972909] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.972912] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.972949] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    0.972976] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000a0a0
[    0.973108] hub 5-0:1.0: USB hub found
[    0.973113] hub 5-0:1.0: 2 ports detected
[    0.973191] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.973198] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.973202] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.973238] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    0.973265] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a080
[    0.973402] hub 6-0:1.0: USB hub found
[    0.973406] hub 6-0:1.0: 2 ports detected
[    0.973484] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    0.973492] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.973496] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.973533] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    0.973560] uhci_hcd 0000:00:1d.2: irq 16, io base 0x0000a060
[    0.973689] hub 7-0:1.0: USB hub found
[    0.973693] hub 7-0:1.0: 2 ports detected
[    0.973768] uhci_hcd 0000:00:1d.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.973775] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.973779] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.973815] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[    0.973854] uhci_hcd 0000:00:1d.3: irq 18, io base 0x0000a040
[    0.973987] hub 8-0:1.0: USB hub found
[    0.973995] hub 8-0:1.0: 2 ports detected
[    0.974133] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[    0.994946] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.994952] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.995072] mousedev: PS/2 mouse device common for all mice
[    0.996563] rtc_cmos 00:04: RTC can wake from S4
[    0.996671] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    0.996699] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.996782] device-mapper: uevent: version 1.0.3
[    0.996866] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[    0.996903] EISA: Probing bus 0 at eisa.0
[    0.996906] EISA: Cannot allocate resource for mainboard
[    0.996908] Cannot allocate resource for EISA slot 1
[    0.996910] Cannot allocate resource for EISA slot 2
[    0.996913] Cannot allocate resource for EISA slot 3
[    0.996915] Cannot allocate resource for EISA slot 4
[    0.996917] Cannot allocate resource for EISA slot 5
[    0.996919] Cannot allocate resource for EISA slot 6
[    0.996921] Cannot allocate resource for EISA slot 7
[    0.996923] Cannot allocate resource for EISA slot 8
[    0.996925] EISA: Detected 0 cards.
[    0.996936] cpufreq-nforce2: No nForce2 chipset.
[    0.996988] cpuidle: using governor ladder
[    0.997073] cpuidle: using governor menu
[    0.997075] EFI Variables Facility v0.08 2004-May-17
[    0.997433] TCP cubic registered
[    0.997592] NET: Registered protocol family 10
[    0.998302] NET: Registered protocol family 17
[    0.998318] Registering the dns_resolver key type
[    0.998340] Using IPI No-Shortcut mode
[    0.998425] PM: Hibernation image not present or could not be loaded.
[    0.998436] registered taskstats version 1
[    1.012787]   Magic number: 15:328:724
[    1.012802] block loop4: hash matches
[    1.012891] rtc_cmos 00:04: setting system clock to 2011-10-25 07:44:51 UTC (1319528691)
[    1.013266] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.013268] EDD information not available.
[    1.013503] Freeing unused kernel memory: 720k freed
[    1.013807] Write protecting the kernel text: 5496k
[    1.013892] Write protecting the kernel read-only data: 2232k
[    1.013894] NX-protecting the kernel data: 4744k
[    1.018562] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.032745] udevd[84]: starting version 173
[    1.131150] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.131180] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.131226] r8169 0000:03:00.0: setting latency timer to 64
[    1.131296] r8169 0000:03:00.0: irq 47 for MSI/MSI-X
[    1.131908] r8169 0000:03:00.0: eth0: RTL8168c/8111c at 0xf842e000, 00:1e:68:fe:c3:ce, XID 1c2000c0 IRQ 47
[    1.137818] firewire_ohci 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.137828] firewire_ohci 0000:06:00.0: setting latency timer to 64
[    1.142071] sdhci: Secure Digital Host Controller Interface driver
[    1.142075] sdhci: Copyright(c) Pierre Ossman
[    1.156937] ahci 0000:00:1f.2: version 3.0
[    1.156953] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.157012] ahci 0000:00:1f.2: irq 48 for MSI/MSI-X
[    1.157029] ahci 0000:00:1f.2: BIOS update required for suspend/resume
[    1.157101] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[    1.157105] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc ems sxs 
[    1.157111] ahci 0000:00:1f.2: setting latency timer to 64
[    1.180943] scsi0 : ahci
[    1.181069] scsi1 : ahci
[    1.181147] scsi2 : ahci
[    1.181229] scsi3 : ahci
[    1.181304] scsi4 : ahci
[    1.181380] scsi5 : ahci
[    1.181574] ata1: SATA max UDMA/133 abar m2048@0xdf305000 port 0xdf305100 irq 48
[    1.181578] ata2: SATA max UDMA/133 abar m2048@0xdf305000 port 0xdf305180 irq 48
[    1.181581] ata3: DUMMY
[    1.181583] ata4: DUMMY
[    1.181586] ata5: SATA max UDMA/133 abar m2048@0xdf305000 port 0xdf305300 irq 48
[    1.181589] ata6: SATA max UDMA/133 abar m2048@0xdf305000 port 0xdf305380 irq 48
[    1.200120] firewire_ohci: Added fw-ohci device 0000:06:00.0, OHCI v1.10, 4 IR + 0 IT contexts, quirks 0x10
[    1.200232] sdhci-pci 0000:06:00.1: SDHCI controller found [197b:2382] (rev 0)
[    1.200253] sdhci-pci 0000:06:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.200303] sdhci-pci 0000:06:00.1: setting latency timer to 64
[    1.200313] mmc0: no vmmc regulator found
[    1.200350] Registered led device: mmc0::
[    1.200391] mmc0: SDHCI controller on PCI [0000:06:00.1] using DMA
[    1.200403] sdhci-pci 0000:06:00.2: SDHCI controller found [197b:2381] (rev 0)
[    1.200418] sdhci-pci 0000:06:00.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.200428] sdhci-pci 0000:06:00.2: Refusing to bind to secondary interface.
[    1.200436] sdhci-pci 0000:06:00.2: PCI INT A disabled
[    1.340044] usb 2-4: new high speed USB device number 3 using ehci_hcd
[    1.500037] ata6: SATA link down (SStatus 0 SControl 300)
[    1.504070] ata5: SATA link down (SStatus 0 SControl 300)
[    1.608037] usb 2-8: new high speed USB device number 4 using ehci_hcd
[    1.680026] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.680045] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.680946] ata1.00: ATA-8: Hitachi HTS543225L9A300, FBEOC44C, max UDMA/100
[    1.680952] ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.682050] ata1.00: configured for UDMA/100
[    1.682192] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54322 FBEO PQ: 0 ANSI: 5
[    1.682376] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.682380] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    1.682432] sd 0:0:0:0: [sda] Write Protect is off
[    1.682439] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.682470] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.683599] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T50L, SC04, max UDMA/100
[    1.688431] ata2.00: configured for UDMA/100
[    1.700113] firewire_core: created device fw0: GUID 00241b00c2cc3c01, S400
[    1.721909]  sda: sda1 sda2 < sda5 >
[    1.722195] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.801657] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T50L  SC04 PQ: 0 ANSI: 5
[    1.911778] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.911782] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.911911] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.911980] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.984031] usb 5-1: new low speed USB device number 2 using uhci_hcd
[    2.196562] input: Microsoft  Compact Optical Mouse 500 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input5
[    2.196684] generic-usb 0003:045E:0737.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft  Compact Optical Mouse 500] on usb-0000:00:1d.0-1/input0
[    2.196701] usbcore: registered new interface driver usbhid
[    2.196703] usbhid: USB HID core driver
[    2.277497] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   15.416069] udevd[342]: starting version 173
[   15.451206] lp: driver loaded but no devices found
[   15.556944] Adding 4190204k swap on /dev/sda5.  Priority:-1 extents:1 across:4190204k 
[   15.657142] hp_accel: hardware type HPDV5_I found
[   15.668228] lis3lv02d: 8 bits sensor found
[   15.679574] acpi device:08: registered as cooling_device2
[   15.679716] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:06/LNXVIDEO:01/input/input6
[   15.680663] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   15.718739] ene_ir: chip is 0x3926 - kbver = 0x00, rev = 0xc0
[   15.718743] ene_ir: PLL freq = 1406
[   15.718745] ene_ir: KB3926C detected
[   15.718758] ene_ir: Firmware regs: 00 00
[   15.718760] ene_ir: Hardware features:
[   15.718762] ene_ir: * Uses GPIO 40 for IR demodulated input
[   15.728458] IR NEC protocol handler initialized
[   15.732105] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   15.733670] IR RC5(x) protocol handler initialized
[   15.734818] lib80211: common routines for IEEE802.11 drivers
[   15.734821] lib80211_crypt: registered algorithm 'NULL'
[   15.743888] nvidia: module license 'NVIDIA' taints kernel.
[   15.743892] Disabling lock debugging due to kernel taint
[   15.746976] IR RC6 protocol handler initialized
[   15.753830] Registered IR keymap rc-rc6-mce
[   15.753951] input: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0/input7
[   15.754068] rc0: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0
[   15.756373] ene_ir: driver has been successfully loaded
[   15.769363] IR JVC protocol handler initialized
[   15.773697] wl 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   15.773712] wl 0000:02:00.0: setting latency timer to 64
[   15.784659] IR Sony protocol handler initialized
[   15.801561] lirc_dev: IR Remote Control driver registered, major 249 
[   15.802025] rc rc0: lirc_dev: driver ir-lirc-codec (ene_ir) registered at minor = 0
[   15.802028] IR LIRC bridge handler initialized
[   15.833105] lib80211_crypt: registered algorithm 'TKIP'
[   16.091364] type=1400 audit(1319528706.572:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=626 comm="apparmor_parser"
[   16.091823] type=1400 audit(1319528706.572:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=626 comm="apparmor_parser"
[   16.092132] type=1400 audit(1319528706.576:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=626 comm="apparmor_parser"
[   16.095821] type=1400 audit(1319528706.576:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=692 comm="apparmor_parser"
[   16.099579] type=1400 audit(1319528706.580:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=692 comm="apparmor_parser"
[   16.099875] type=1400 audit(1319528706.580:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=692 comm="apparmor_parser"
[   16.278105] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input8
[   16.278341] Registered led device: hp::hddprotect
[   16.278467] hp_accel: driver loaded
[   16.279293] wmi: Mapper loaded
[   16.318151] input: HP WMI hotkeys as /devices/virtual/input/input9
[   16.331326] jmb38x_ms 0000:06:00.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   16.331335] jmb38x_ms 0000:06:00.3: setting latency timer to 64
[   16.367224] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   16.367287] HDA Intel 0000:00:1b.0: irq 49 for MSI/MSI-X
[   16.367320] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   16.396566] Linux video capture interface: v2.00
[   16.397828] uvcvideo: Found UVC 1.00 device HP Webcam (0408:03ba)
[   16.409789] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input10
[   16.409973] usbcore: registered new interface driver uvcvideo
[   16.409975] USB Video Class driver (v1.1.0)
[   16.436433] input: HDA Intel Mic at Sep UNKNOWN Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   16.436530] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   16.436604] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   16.554334] eth1: Broadcom BCM4315 802.11 Hybrid Wireless Controller 5.100.82.38
[   16.600432] nvidia 0000:01:00.0: power state changed by ACPI to D0
[   16.600445] nvidia 0000:01:00.0: power state changed by ACPI to D0
[   16.600468] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   16.600491] nvidia 0000:01:00.0: setting latency timer to 64
[   16.600504] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   16.601093] NVRM: loading NVIDIA UNIX x86 Kernel Module  173.14.30  Thu Apr 14 08:47:14 PDT 2011
[   16.725812] type=1400 audit(1319528707.212:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=963 comm="apparmor_parser"
[   16.728680] type=1400 audit(1319528707.212:9): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=964 comm="apparmor_parser"
[   16.737592] type=1400 audit(1319528707.224:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=964 comm="apparmor_parser"
[   16.737947] type=1400 audit(1319528707.224:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=964 comm="apparmor_parser"
[   16.856351] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04751/0xa00000/0x0
[   16.929007] r8169 0000:03:00.0: eth0: link down
[   16.931226] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   16.944422] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input14
[   17.007632] init: failsafe main process (907) killed by TERM signal
[   17.012766] init: apport pre-start process (1019) terminated with status 1
[   17.032114] init: apport post-stop process (1056) terminated with status 1
[   17.074154] dvb-usb: found a 'AVerMedia A309' in cold state, will try to load a firmware
[   17.143145] dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw'
[   17.212289] dvb-usb: found a 'AVerMedia A309' in warm state.
[   17.212350] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[   17.212692] DVB: registering new adapter (AVerMedia A309)
[   17.217904] af9013: firmware version:4.95.0.0
[   17.221654] DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)...
[   17.223955] MXL5005S: Attached at address 0xc6
[   17.223960] dvb-usb: AVerMedia A309 successfully initialized and connected.
[   17.230432] usbcore: registered new interface driver dvb_usb_af9015
[   17.297496] vesafb: mode is 640x480x32, linelength=2560, pages=0
[   17.297499] vesafb: scrolling: redraw
[   17.297502] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[   17.298368] vesafb: framebuffer at 0xd1000000, mapped to 0xf9000000, using 1216k, total 1216k
[   17.298540] Console: switching to colour frame buffer device 80x30
[   17.298555] fb0: VESA VGA frame buffer device
[   17.351282] ppdev: user-space parallel port driver
[   17.553623] vboxdrv: Found 2 processor cores.
[   17.553751] vboxdrv: fAsync=0 offMin=0x1fe offMax=0x8a2
[   17.553818] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   17.553820] vboxdrv: Successfully loaded version 4.1.2_Ubuntu (interface 0x00190000).
[   17.573073] vboxpci: IOMMU not found (not registered)
[   17.600032] Bluetooth: Core ver 2.16
[   17.600058] NET: Registered protocol family 31
[   17.600060] Bluetooth: HCI device and connection manager initialized
[   17.600062] Bluetooth: HCI socket layer initialized
[   17.600064] Bluetooth: L2CAP socket layer initialized
[   17.600547] Bluetooth: SCO socket layer initialized
[   17.603255] Bluetooth: RFCOMM TTY layer initialized
[   17.603260] Bluetooth: RFCOMM socket layer initialized
[   17.603263] Bluetooth: RFCOMM ver 1.11
[   17.635482] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   17.635486] Bluetooth: BNEP filters: protocol multicast
[   22.520192] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[   24.525115] init: plymouth-upstart-bridge main process (940) killed by TERM signal
[   25.971561] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[   27.896032] eth1: no IPv6 routers present
[   49.488019] eth1: no IPv6 routers present
[  257.292038] irq_handler: 30 callbacks suppressed
[  257.292042] firewire_ohci: isochronous cycle inconsistent
[  257.884550] firewire_core: created device fw1: GUID 080046010415059e, S100
[  257.884565] firewire_core: phy config: card 0, new root=ffc1, gap_count=5
[  257.886669] firewire_core: IRM is not 1394a compliant, making local node (ffc0) root.
[  257.886680] firewire_core: phy config: card 0, new root=ffc0, gap_count=5

molto probabile che mi sia incasinato io

[cristian_c]

C'è qualcosina che non mi piace nel dmesg 

Comunque, apri un terminale e digita:

Codice: Seleziona tutto

cat /etc/modules

copiando il tutto qui sempre all'interno del tag 'code' 

[Sga72]

si infatti una cosa strana

in questo portatile ho VirtualBox con installato windows XP e neanche in windows vedo la firewire

strano però, prima di formattare tutto, cioe ieri, funzionava tutto alla grande.

Su questo pc usavo windows vista che ho eliminato per continuo stress

[daigo]

ciao io avevo trovato questo in rete e aveva funzionato,mi vedeva la telecamera con kino.

Codice: Seleziona tutto

sudo gedit /etc/udev/rules.d/40-permissions.rules

questo file io l'avevo vuoto, e ho incollato le stringhe sotto ,salvi e riavvii.se tu hai gia scritto dell'altro nel file prova a cancellarlo e metti solo questo.

Codice: Seleziona tutto

# IEEE1394 (firewire) devices
# Please note that raw1394 gives unrestricted, raw access to every single
# device on the bus and those devices may do anything as root on your system.
# Yes, I know it also happens to be the only way to rewind your video camera,
# but it's not going to be group "video", okay?
KERNEL=="raw1394", MODE="0666", GROUP="disk"
KERNEL=="dv1394*", MODE="0666", GROUP="video"
KERNEL=="video1394*", MODE="0666", GROUP="video"

[cristian_c]

si infatti una cosa strana

in questo portatile ho VirtualBox con installato windows XP e neanche in windows vedo la firewire

strano però, prima di formattare tutto, cioe ieri, funzionava tutto alla grande.

Su questo pc usavo windows vista che ho eliminato per continuo stress

Ok, però non hai postato il risultato del comando che ti avevo chiesto  :-[

[Sga72]

si scusa stavo installando cinellera da riga di comando, ha finito ora

ecco il risultato e grazie dell'aiuto

Codice: Seleziona tutto

# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.

lp

ieee1394
dv1394
video1394
raw1394
gianni@gianni-HP-Pavilion-dv5-Notebook-PC:~$ 

[cristian_c]

Ora, digita il seguente comando in un terminale:

Codice: Seleziona tutto

cat /etc/udev/rules.d/40-permissions.rules

e incolla qui il risultato sempre all'interno del tag 'code' 

[Sga72]

ecco il risultato

Codice: Seleziona tutto

# IEEE1394 (firewire) devices
# Please note that raw1394 gives unrestricted, raw access to every single
# device on the bus and those devices may do anything as root on your system.
# Yes, I know it also happens to be the only way to rewind your video camera,
# but it's not going to be group "video", okay?
KERNEL=="raw1394", MODE="0666", GROUP="disk"
KERNEL=="dv1394*", MODE="0666", GROUP="video"
KERNEL=="video1394*", MODE="0666", GROUP="video"

la telecamera ora è spenta è scollegata, va bene comunque?

[cristian_c]

la telecamera ora è spenta è scollegata, va bene comunque?

Ora accendi e collega la telecamera. Subito dopo digita in un terminale:

Codice: Seleziona tutto

dmesg

copiando qui il risultato 

[Sga72]

::) ::) ::)

Codice: Seleziona tutto

[    0.513386] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd2ffffff]
[    0.513389] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.513392] pci_bus 0000:02: resource 0 [io  0x8000-0x8fff]
[    0.513394] pci_bus 0000:02: resource 1 [mem 0xde200000-0xdf2fffff]
[    0.513397] pci_bus 0000:02: resource 2 [mem 0xd3000000-0xd3ffffff 64bit pref]
[    0.513400] pci_bus 0000:03: resource 0 [io  0x6000-0x7fff]
[    0.513403] pci_bus 0000:03: resource 1 [mem 0xdd200000-0xde1fffff]
[    0.513406] pci_bus 0000:03: resource 2 [mem 0xd4000000-0xd50fffff 64bit pref]
[    0.513409] pci_bus 0000:04: resource 0 [io  0x5000-0x5fff]
[    0.513411] pci_bus 0000:04: resource 1 [mem 0xdc200000-0xdd1fffff]
[    0.513414] pci_bus 0000:04: resource 2 [mem 0xd5100000-0xd60fffff 64bit pref]
[    0.513417] pci_bus 0000:05: resource 0 [io  0x4000-0x4fff]
[    0.513420] pci_bus 0000:05: resource 1 [mem 0xdb200000-0xdc1fffff]
[    0.513423] pci_bus 0000:05: resource 2 [mem 0xd6100000-0xd70fffff 64bit pref]
[    0.513425] pci_bus 0000:06: resource 0 [io  0x3000-0x3fff]
[    0.513428] pci_bus 0000:06: resource 1 [mem 0xda100000-0xdb1fffff]
[    0.513431] pci_bus 0000:06: resource 2 [mem 0xd7100000-0xd80fffff 64bit pref]
[    0.513434] pci_bus 0000:07: resource 0 [io  0x2000-0x2fff]
[    0.513436] pci_bus 0000:07: resource 1 [mem 0xd9100000-0xda0fffff]
[    0.513439] pci_bus 0000:07: resource 2 [mem 0xd8100000-0xd90fffff 64bit pref]
[    0.513442] pci_bus 0000:0a: resource 4 [io  0x0000-0x0cf7]
[    0.513445] pci_bus 0000:0a: resource 5 [io  0x0d00-0xffff]
[    0.513448] pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff]
[    0.513451] pci_bus 0000:0a: resource 7 [mem 0xc0000000-0xfebfffff]
[    0.513502] NET: Registered protocol family 2
[    0.513588] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.513874] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.514340] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.514567] TCP: Hash tables configured (established 131072 bind 65536)
[    0.514569] TCP reno registered
[    0.514573] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.514580] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.514677] NET: Registered protocol family 1
[    0.515129] pci 0000:01:00.0: Boot video device
[    0.515200] PCI: CLS 64 bytes, default 64
[    0.515207] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[    0.515209] Simple Boot Flag at 0x44 set to 0x1
[    0.515570] audit: initializing netlink socket (disabled)
[    0.515580] type=2000 audit(1319533464.508:1): initialized
[    0.545900] highmem bounce pool size: 64 pages
[    0.545906] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.560607] VFS: Disk quotas dquot_6.5.2
[    0.560688] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.561481] fuse init (API version 7.16)
[    0.561588] msgmni has been set to 1641
[    0.561997] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.562028] io scheduler noop registered
[    0.562030] io scheduler deadline registered
[    0.562046] io scheduler cfq registered (default)
[    0.562200] pcieport 0000:00:01.0: setting latency timer to 64
[    0.562240] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.562319] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.562371] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    0.562470] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.562522] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[    0.562617] pcieport 0000:00:1c.2: setting latency timer to 64
[    0.562669] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
[    0.562764] pcieport 0000:00:1c.3: setting latency timer to 64
[    0.562815] pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X
[    0.562914] pcieport 0000:00:1c.4: setting latency timer to 64
[    0.562966] pcieport 0000:00:1c.4: irq 45 for MSI/MSI-X
[    0.563061] pcieport 0000:00:1c.5: setting latency timer to 64
[    0.563113] pcieport 0000:00:1c.5: irq 46 for MSI/MSI-X
[    0.563233] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[    0.563236] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    0.563241] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[    0.563264] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.563266] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    0.563271] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    0.563296] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[    0.563298] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    0.563304] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[    0.563328] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[    0.563333] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[    0.563357] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[    0.563363] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[    0.563386] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[    0.563388] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
[    0.563391] pci 0000:06:00.1: Signaling PME through PCIe PME interrupt
[    0.563393] pci 0000:06:00.2: Signaling PME through PCIe PME interrupt
[    0.563395] pci 0000:06:00.3: Signaling PME through PCIe PME interrupt
[    0.563398] pci 0000:06:00.4: Signaling PME through PCIe PME interrupt
[    0.563403] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[    0.563427] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[    0.563433] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[    0.563456] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.563486] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.563559] intel_idle: MWAIT substates: 0x22220
[    0.563561] intel_idle: does not run on family 6 model 15
[    0.563861] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.564164] ACPI: AC Adapter [ACAD] (on-line)
[    0.564273] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.564279] ACPI: Power Button [PWRB]
[    0.564330] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    0.564718] ACPI: Lid Switch [LID0]
[    0.564766] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[    0.564770] ACPI: Sleep Button [SLPB]
[    0.564834] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.564838] ACPI: Power Button [PWRF]
[    0.564875] ACPI: acpi_idle registered with cpuidle
[    0.565045] Monitor-Mwait will be used to enter C-1 state
[    0.565078] Monitor-Mwait will be used to enter C-2 state
[    0.565086] Marking TSC unstable due to TSC halts in idle
[    0.568976] [Firmware Bug]: Invalid critical threshold (0)
[    0.569517] thermal LNXTHERM:00: registered as thermal_zone0
[    0.569520] ACPI: Thermal Zone [TZ01] (49 C)
[    0.569539] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.569570] ERST: Table is not found!
[    0.569617] isapnp: Scanning for PnP cards...
[    0.569798] ACPI: Battery Slot [BAT0] (battery absent)
[    0.612081] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.924944] isapnp: No Plug & Play device found
[    0.933668] Linux agpgart interface v0.103
[    0.935326] brd: module loaded
[    0.935987] loop: module loaded
[    0.936581] Fixed MDIO Bus: probed
[    0.936608] PPP generic driver version 2.4.2
[    0.936647] tun: Universal TUN/TAP device driver, 1.6
[    0.936649] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.936748] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.936767] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.936784] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.936788] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.936829] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.936860] ehci_hcd 0000:00:1a.7: debug port 1
[    0.940748] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[    0.940767] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xdf305c00
[    0.956015] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.956139] hub 1-0:1.0: USB hub found
[    0.956144] hub 1-0:1.0: 4 ports detected
[    0.956236] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.956251] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.956255] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.956296] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.956325] ehci_hcd 0000:00:1d.7: debug port 1
[    0.960219] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    0.960235] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xdf305800
[    0.976016] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.976129] hub 2-0:1.0: USB hub found
[    0.976133] hub 2-0:1.0: 8 ports detected
[    0.976231] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.976248] uhci_hcd: USB Universal Host Controller Interface driver
[    0.976270] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.976278] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.976282] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.976318] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.976356] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a0e0
[    0.976487] hub 3-0:1.0: USB hub found
[    0.976491] hub 3-0:1.0: 2 ports detected
[    0.976576] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.976584] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.976588] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.976624] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.976663] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a0c0
[    0.976795] hub 4-0:1.0: USB hub found
[    0.976799] hub 4-0:1.0: 2 ports detected
[    0.976877] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.976885] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.976889] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.976929] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    0.976956] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000a0a0
[    0.977086] hub 5-0:1.0: USB hub found
[    0.977090] hub 5-0:1.0: 2 ports detected
[    0.977167] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.977174] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.977178] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.977214] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    0.977241] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a080
[    0.977375] hub 6-0:1.0: USB hub found
[    0.977379] hub 6-0:1.0: 2 ports detected
[    0.977457] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    0.977464] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.977468] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.977504] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    0.977531] uhci_hcd 0000:00:1d.2: irq 16, io base 0x0000a060
[    0.977667] hub 7-0:1.0: USB hub found
[    0.977671] hub 7-0:1.0: 2 ports detected
[    0.977746] uhci_hcd 0000:00:1d.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.977753] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.977757] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.977796] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[    0.977833] uhci_hcd 0000:00:1d.3: irq 18, io base 0x0000a040
[    0.977962] hub 8-0:1.0: USB hub found
[    0.977967] hub 8-0:1.0: 2 ports detected
[    0.978109] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[    1.000012] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.000019] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.000141] mousedev: PS/2 mouse device common for all mice
[    1.001467] rtc_cmos 00:04: RTC can wake from S4
[    1.001576] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    1.001604] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.001688] device-mapper: uevent: version 1.0.3
[    1.001770] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[    1.001808] EISA: Probing bus 0 at eisa.0
[    1.001811] EISA: Cannot allocate resource for mainboard
[    1.001813] Cannot allocate resource for EISA slot 1
[    1.001816] Cannot allocate resource for EISA slot 2
[    1.001818] Cannot allocate resource for EISA slot 3
[    1.001820] Cannot allocate resource for EISA slot 4
[    1.001822] Cannot allocate resource for EISA slot 5
[    1.001824] Cannot allocate resource for EISA slot 6
[    1.001827] Cannot allocate resource for EISA slot 7
[    1.001829] Cannot allocate resource for EISA slot 8
[    1.001831] EISA: Detected 0 cards.
[    1.001842] cpufreq-nforce2: No nForce2 chipset.
[    1.001896] cpuidle: using governor ladder
[    1.001983] cpuidle: using governor menu
[    1.001985] EFI Variables Facility v0.08 2004-May-17
[    1.002336] TCP cubic registered
[    1.002493] NET: Registered protocol family 10
[    1.003194] NET: Registered protocol family 17
[    1.003209] Registering the dns_resolver key type
[    1.003234] Using IPI No-Shortcut mode
[    1.003322] PM: Hibernation image not present or could not be loaded.
[    1.003334] registered taskstats version 1
[    1.017666]   Magic number: 15:369:71
[    1.017760] rtc_cmos 00:04: setting system clock to 2011-10-25 09:04:25 UTC (1319533465)
[    1.018120] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.018123] EDD information not available.
[    1.018323] Freeing unused kernel memory: 720k freed
[    1.018603] Write protecting the kernel text: 5496k
[    1.018680] Write protecting the kernel read-only data: 2232k
[    1.018681] NX-protecting the kernel data: 4744k
[    1.023772] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.038955] udevd[84]: starting version 173
[    1.099894] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.099923] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.099968] r8169 0000:03:00.0: setting latency timer to 64
[    1.101837] sdhci: Secure Digital Host Controller Interface driver
[    1.101840] sdhci: Copyright(c) Pierre Ossman
[    1.102095] sdhci-pci 0000:06:00.1: SDHCI controller found [197b:2382] (rev 0)
[    1.102114] sdhci-pci 0000:06:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.102158] sdhci-pci 0000:06:00.1: setting latency timer to 64
[    1.102170] mmc0: no vmmc regulator found
[    1.102204] Registered led device: mmc0::
[    1.102246] mmc0: SDHCI controller on PCI [0000:06:00.1] using DMA
[    1.102256] sdhci-pci 0000:06:00.2: SDHCI controller found [197b:2381] (rev 0)
[    1.102271] sdhci-pci 0000:06:00.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.102278] sdhci-pci 0000:06:00.2: Refusing to bind to secondary interface.
[    1.102286] sdhci-pci 0000:06:00.2: PCI INT A disabled
[    1.107056] r8169 0000:03:00.0: irq 47 for MSI/MSI-X
[    1.107696] r8169 0000:03:00.0: eth0: RTL8168c/8111c at 0xf842e000, 00:1e:68:fe:c3:ce, XID 1c2000c0 IRQ 47
[    1.107926] ahci 0000:00:1f.2: version 3.0
[    1.107943] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.108016] ahci 0000:00:1f.2: irq 48 for MSI/MSI-X
[    1.108036] ahci 0000:00:1f.2: BIOS update required for suspend/resume
[    1.112777] firewire_ohci 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.112787] firewire_ohci 0000:06:00.0: setting latency timer to 64
[    1.126823] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[    1.126828] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc ems sxs 
[    1.126835] ahci 0000:00:1f.2: setting latency timer to 64
[    1.151071] scsi0 : ahci
[    1.153523] scsi1 : ahci
[    1.153987] scsi2 : ahci
[    1.156961] scsi3 : ahci
[    1.159175] scsi4 : ahci
[    1.161542] scsi5 : ahci
[    1.161757] ata1: SATA max UDMA/133 abar m2048@0xdf305000 port 0xdf305100 irq 48
[    1.161762] ata2: SATA max UDMA/133 abar m2048@0xdf305000 port 0xdf305180 irq 48
[    1.161764] ata3: DUMMY
[    1.161766] ata4: DUMMY
[    1.161769] ata5: SATA max UDMA/133 abar m2048@0xdf305000 port 0xdf305300 irq 48
[    1.161773] ata6: SATA max UDMA/133 abar m2048@0xdf305000 port 0xdf305380 irq 48
[    1.176153] firewire_ohci: Added fw-ohci device 0000:06:00.0, OHCI v1.10, 4 IR + 0 IT contexts, quirks 0x10
[    1.344025] usb 2-4: new high speed USB device number 3 using ehci_hcd
[    1.488032] ata5: SATA link down (SStatus 0 SControl 300)
[    1.488057] ata6: SATA link down (SStatus 0 SControl 300)
[    1.608037] usb 2-8: new high speed USB device number 4 using ehci_hcd
[    1.652051] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.652942] ata1.00: ATA-8: Hitachi HTS543225L9A300, FBEOC44C, max UDMA/100
[    1.652946] ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.654005] ata1.00: configured for UDMA/100
[    1.654166] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54322 FBEO PQ: 0 ANSI: 5
[    1.654305] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    1.654346] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.654358] sd 0:0:0:0: [sda] Write Protect is off
[    1.654361] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.654385] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.656043] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.659871] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T50L, SC04, max UDMA/100
[    1.664749] ata2.00: configured for UDMA/100
[    1.676099] firewire_core: created device fw0: GUID 00241b00c2cc3c01, S400
[    1.698021]  sda: sda1 sda2 < sda5 >
[    1.698310] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.781391] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T50L  SC04 PQ: 0 ANSI: 5
[    1.891485] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.891491] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.891642] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.891721] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.988030] usb 5-1: new low speed USB device number 2 using uhci_hcd
[    2.196565] input: Microsoft  Compact Optical Mouse 500 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input5
[    2.196693] generic-usb 0003:045E:0737.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft  Compact Optical Mouse 500] on usb-0000:00:1d.0-1/input0
[    2.196713] usbcore: registered new interface driver usbhid
[    2.196715] usbhid: USB HID core driver
[    2.231258] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   15.090600] udevd[345]: starting version 173
[   15.138497] lp: driver loaded but no devices found
[   15.222235] Adding 4190204k swap on /dev/sda5.  Priority:-1 extents:1 across:4190204k 
[   15.290052] lib80211: common routines for IEEE802.11 drivers
[   15.291717] lib80211_crypt: registered algorithm 'NULL'
[   15.323571] wl: module license 'MIXED/Proprietary' taints kernel.
[   15.323576] Disabling lock debugging due to kernel taint
[   15.336622] jmb38x_ms 0000:06:00.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   15.336632] jmb38x_ms 0000:06:00.3: setting latency timer to 64
[   15.349403] hp_accel: hardware type HPDV5_I found
[   15.350034] wl 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   15.350049] wl 0000:02:00.0: setting latency timer to 64
[   15.360211] lis3lv02d: 8 bits sensor found
[   15.376711] lib80211_crypt: registered algorithm 'TKIP'
[   15.443708] acpi device:08: registered as cooling_device2
[   15.443795] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:06/LNXVIDEO:01/input/input6
[   15.443855] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   15.499424] ene_ir: chip is 0x3926 - kbver = 0x00, rev = 0xc0
[   15.499427] ene_ir: PLL freq = 1406
[   15.499429] ene_ir: KB3926C detected
[   15.499443] ene_ir: Firmware regs: c0 00
[   15.499444] ene_ir: Hardware features:
[   15.499446] ene_ir: * Uses GPIO 40 for IR demodulated input
[   15.560085] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input7
[   15.560229] Registered led device: hp::hddprotect
[   15.560249] hp_accel: driver loaded
[   15.560508] wmi: Mapper loaded
[   15.580359] eth1: Broadcom BCM4315 802.11 Hybrid Wireless Controller 5.100.82.38
[   15.593417] IR NEC protocol handler initialized
[   15.613729] type=1400 audit(1319533480.090:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=644 comm="apparmor_parser"
[   15.614189] type=1400 audit(1319533480.090:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=644 comm="apparmor_parser"
[   15.614478] type=1400 audit(1319533480.090:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=644 comm="apparmor_parser"
[   15.616023] Registered IR keymap rc-rc6-mce
[   15.616225] input: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0/input8
[   15.616359] rc0: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0
[   15.619415] ene_ir: driver has been successfully loaded
[   15.643691] IR RC5(x) protocol handler initialized
[   15.658295] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   15.658358] HDA Intel 0000:00:1b.0: irq 49 for MSI/MSI-X
[   15.658392] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   15.875047] IR RC6 protocol handler initialized
[   15.889762] IR JVC protocol handler initialized
[   15.915887] input: HDA Intel Mic at Sep UNKNOWN Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   15.918617] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   15.919116] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   16.110414] input: HP WMI hotkeys as /devices/virtual/input/input12
[   16.125803] nvidia 0000:01:00.0: power state changed by ACPI to D0
[   16.125817] nvidia 0000:01:00.0: power state changed by ACPI to D0
[   16.125840] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   16.125862] nvidia 0000:01:00.0: setting latency timer to 64
[   16.125875] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   16.126064] NVRM: loading NVIDIA UNIX x86 Kernel Module  173.14.30  Thu Apr 14 08:47:14 PDT 2011
[   16.141675] IR Sony protocol handler initialized
[   16.154720] lirc_dev: IR Remote Control driver registered, major 249 
[   16.155128] rc rc0: lirc_dev: driver ir-lirc-codec (ene_ir) registered at minor = 0
[   16.155131] IR LIRC bridge handler initialized
[   16.201585] Linux video capture interface: v2.00
[   16.202236] uvcvideo: Found UVC 1.00 device HP Webcam (0408:03ba)
[   16.208631] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input13
[   16.208765] usbcore: registered new interface driver uvcvideo
[   16.208768] USB Video Class driver (v1.1.0)
[   16.300858] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   16.547112] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04751/0xa00000/0x0
[   16.605914] dvb-usb: found a 'AVerMedia A309' in cold state, will try to load a firmware
[   16.663731] dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw'
[   16.667598] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input14
[   16.687165] type=1400 audit(1319533481.162:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=1011 comm="apparmor_parser"
[   16.687428] type=1400 audit(1319533481.162:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1012 comm="apparmor_parser"
[   16.697039] type=1400 audit(1319533481.174:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1012 comm="apparmor_parser"
[   16.697339] type=1400 audit(1319533481.174:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1012 comm="apparmor_parser"
[   16.717059] type=1400 audit(1319533481.194:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1013 comm="apparmor_parser"
[   16.742898] type=1400 audit(1319533481.218:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=1013 comm="apparmor_parser"
[   16.751258] type=1400 audit(1319533481.226:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1015 comm="apparmor_parser"
[   16.751661] dvb-usb: found a 'AVerMedia A309' in warm state.
[   16.751732] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[   16.752264] DVB: registering new adapter (AVerMedia A309)
[   16.773162] af9013: firmware version:4.95.0.0
[   16.776914] DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)...
[   16.789805] MXL5005S: Attached at address 0xc6
[   16.789810] dvb-usb: AVerMedia A309 successfully initialized and connected.
[   16.797001] usbcore: registered new interface driver dvb_usb_af9015
[   16.841692] vesafb: mode is 640x480x32, linelength=2560, pages=0
[   16.841696] vesafb: scrolling: redraw
[   16.841699] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[   16.842551] vesafb: framebuffer at 0xd1000000, mapped to 0xf8b00000, using 1216k, total 1216k
[   16.842716] Console: switching to colour frame buffer device 80x30
[   16.842731] fb0: VESA VGA frame buffer device
[   16.910557] ppdev: user-space parallel port driver
[   16.973877] init: failsafe main process (953) killed by TERM signal
[   16.982218] init: apport pre-start process (1085) terminated with status 1
[   17.001505] init: apport post-stop process (1112) terminated with status 1
[   17.024952] r8169 0000:03:00.0: eth0: link down
[   17.029442] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   17.503969] vboxdrv: Found 2 processor cores.
[   17.504080] vboxdrv: fAsync=0 offMin=0x1fe offMax=0x92e
[   17.504140] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   17.504143] vboxdrv: Successfully loaded version 4.1.2_Ubuntu (interface 0x00190000).
[   17.518328] vboxpci: IOMMU not found (not registered)
[   17.558985] Bluetooth: Core ver 2.16
[   17.559010] NET: Registered protocol family 31
[   17.559012] Bluetooth: HCI device and connection manager initialized
[   17.559015] Bluetooth: HCI socket layer initialized
[   17.559017] Bluetooth: L2CAP socket layer initialized
[   17.559552] Bluetooth: SCO socket layer initialized
[   17.562372] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   17.562375] Bluetooth: BNEP filters: protocol multicast
[   17.568957] Bluetooth: RFCOMM TTY layer initialized
[   17.568963] Bluetooth: RFCOMM socket layer initialized
[   17.568965] Bluetooth: RFCOMM ver 1.11
[   22.485700] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[   26.254117] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[   27.504084] eth1: no IPv6 routers present
[   50.560043] eth1: no IPv6 routers present
[  164.881740] CE: hpet increased min_delta_ns to 20113 nsec
[  430.088101] CE: hpet increased min_delta_ns to 30169 nsec
[  899.518521] irq_handler: 21 callbacks suppressed
[  899.518529] firewire_ohci: isochronous cycle inconsistent
[  900.109277] firewire_core: created device fw1: GUID 080046010415059e, S100
[  900.109292] firewire_core: phy config: card 0, new root=ffc1, gap_count=5
[  900.110906] firewire_core: IRM is not 1394a compliant, making local node (ffc0) root.
[  900.110915] firewire_core: phy config: card 0, new root=ffc0, gap_count=5
[ 1174.471819] warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)
[ 2076.040712] firewire_ohci: isochronous cycle inconsistent
[ 2076.631310] firewire_core: created device fw1: GUID 080046010415059e, S100
[ 2076.631317] firewire_core: phy config: card 0, new root=ffc1, gap_count=5
[ 2076.631710] firewire_core: IRM is not 1394a compliant, making local node (ffc0) root.
[ 2076.631713] firewire_core: phy config: card 0, new root=ffc0, gap_count=5

[cristian_c]

Lancia kdenlive da terminale e copia qui l'output che viene fuori

[et4beta]

Ho seguito la discussione per collegare e "vedere" la mia Sony DCR-HC53E(già fatto in anni precedenti..ma la memoria..), ebbene all'inizio non mi riusciva, stavo per sclerare quando mi sono accorto che il connettore del cavo sulla camera(connessione meccanicamente piuttosto precaria) non era ben infilato. Messo a posto quello, tutto ok con Kino. Kdenlive purtroppo non mi si avvia, mi dice: Errore fatale:
                         Il modulo SDL per MLT non è stato trovato

Uso Ubuntu 11.10.
Il mio dmseg(che mi sembra identico al tuo):

Codice: Seleziona tutto

    0.180025] pci 0000:00:1c.3: PCI bridge to [bus 02-02]
[    0.180029] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.180032] pci 0000:00:1c.3:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.180036] pci 0000:00:1c.3:   bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[    0.180087] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
[    0.180090] pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.180093] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.180098] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.180100] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.180102] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.180104] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.180106] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[    0.180107] pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xffffffff] (subtractive decode)
[    0.180120] pci_bus 0000:00: on NUMA node 0
[    0.180124] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.180224] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.180297] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[    0.180327] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[    0.180371]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.180373]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    0.180375] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.184132] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.184167] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.184202] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.184236] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.184270] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.184304] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.184338] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.184372] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.184462] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.184465] vgaarb: loaded
[    0.184466] vgaarb: bridge control possible 0000:01:00.0
[    0.184614] SCSI subsystem initialized
[    0.184658] libata version 3.00 loaded.
[    0.184690] usbcore: registered new interface driver usbfs
[    0.184698] usbcore: registered new interface driver hub
[    0.184718] usbcore: registered new device driver usb
[    0.184779] PCI: Using ACPI for IRQ routing
[    0.184781] PCI: pci_cache_line_size set to 64 bytes
[    0.184836] reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
[    0.184838] reserve RAM buffer: 00000000dff90000 - 00000000dfffffff 
[    0.184909] NetLabel: Initializing
[    0.184910] NetLabel:  domain hash size = 128
[    0.184911] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.184919] NetLabel:  unlabeled traffic allowed by default
[    0.184944] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.184947] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.184950] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.188040] Switching to clocksource hpet
[    0.191704] Switched to NOHz mode on CPU #0
[    0.191784] Switched to NOHz mode on CPU #1
[    0.193233] AppArmor: AppArmor Filesystem Enabled
[    0.193254] pnp: PnP ACPI init
[    0.193266] ACPI: bus type pnp registered
[    0.193339] pnp 00:00: [bus 00-ff]
[    0.193341] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.193343] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.193345] pnp 00:00: [io  0x0d00-0xffff window]
[    0.193346] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.193348] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[    0.193350] pnp 00:00: [mem 0xe0000000-0xffffffff window]
[    0.193394] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.193401] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[    0.193435] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.193438] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.193464] pnp 00:02: [dma 4]
[    0.193465] pnp 00:02: [io  0x0000-0x000f]
[    0.193467] pnp 00:02: [io  0x0081-0x0083]
[    0.193468] pnp 00:02: [io  0x0087]
[    0.193469] pnp 00:02: [io  0x0089-0x008b]
[    0.193471] pnp 00:02: [io  0x008f]
[    0.193472] pnp 00:02: [io  0x00c0-0x00df]
[    0.193490] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.193498] pnp 00:03: [io  0x0070-0x0071]
[    0.193508] pnp 00:03: [irq 8]
[    0.193525] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.193532] pnp 00:04: [io  0x0061]
[    0.193552] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.193558] pnp 00:05: [io  0x00f0-0x00ff]
[    0.193562] pnp 00:05: [irq 13]
[    0.193580] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.193799] pnp 00:06: [irq 6]
[    0.193801] pnp 00:06: [dma 2]
[    0.193802] pnp 00:06: [io  0x03f0-0x03f5]
[    0.193804] pnp 00:06: [io  0x03f7]
[    0.193844] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.194110] pnp 00:07: [irq 7]
[    0.194111] pnp 00:07: [dma 3]
[    0.194113] pnp 00:07: [io  0x0378-0x037f]
[    0.194114] pnp 00:07: [io  0x0778-0x077f]
[    0.194216] pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.194237] pnp 00:08: [io  0x0000-0xffffffffffffffff disabled]
[    0.194239] pnp 00:08: [io  0x0000-0xffffffffffffffff disabled]
[    0.194241] pnp 00:08: [io  0x0290-0x0297]
[    0.194275] system 00:08: [io  0x0290-0x0297] has been reserved
[    0.194277] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.194330] pnp 00:09: [io  0x0010-0x001f]
[    0.194332] pnp 00:09: [io  0x0022-0x003f]
[    0.194333] pnp 00:09: [io  0x0044-0x005f]
[    0.194335] pnp 00:09: [io  0x0062-0x0063]
[    0.194336] pnp 00:09: [io  0x0065-0x006f]
[    0.194337] pnp 00:09: [io  0x0072-0x007f]
[    0.194339] pnp 00:09: [io  0x0080]
[    0.194340] pnp 00:09: [io  0x0084-0x0086]
[    0.194341] pnp 00:09: [io  0x0088]
[    0.194343] pnp 00:09: [io  0x008c-0x008e]
[    0.194344] pnp 00:09: [io  0x0090-0x009f]
[    0.194345] pnp 00:09: [io  0x00a2-0x00bf]
[    0.194347] pnp 00:09: [io  0x00e0-0x00ef]
[    0.194348] pnp 00:09: [io  0x04d0-0x04d1]
[    0.194349] pnp 00:09: [io  0x0800-0x087f]
[    0.194351] pnp 00:09: [io  0x0000-0xffffffffffffffff disabled]
[    0.194353] pnp 00:09: [io  0x0480-0x04bf]
[    0.194354] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
[    0.194356] pnp 00:09: [mem 0xfed20000-0xfed8ffff]
[    0.194396] system 00:09: [io  0x04d0-0x04d1] has been reserved
[    0.194398] system 00:09: [io  0x0800-0x087f] has been reserved
[    0.194400] system 00:09: [io  0x0480-0x04bf] has been reserved
[    0.194402] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.194404] system 00:09: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.194407] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.194456] pnp 00:0a: [mem 0xfed00000-0xfed003ff]
[    0.194476] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.194512] pnp 00:0b: [mem 0xffb00000-0xffbfffff]
[    0.194513] pnp 00:0b: [mem 0xfff00000-0xffffffff]
[    0.194533] pnp 00:0b: Plug and Play ACPI device, IDs INT0800 (active)
[    0.194562] pnp 00:0c: [mem 0xffc00000-0xffefffff]
[    0.194593] system 00:0c: [mem 0xffc00000-0xffefffff] has been reserved
[    0.194596] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.194635] pnp 00:0d: [io  0x0000-0xffffffffffffffff disabled]
[    0.194637] pnp 00:0d: [io  0x0000-0xffffffffffffffff disabled]
[    0.194639] pnp 00:0d: [mem 0xfec00000-0xfec00fff]
[    0.194640] pnp 00:0d: [mem 0xfee00000-0xfee00fff]
[    0.194672] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.194674] system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.194676] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.194698] pnp 00:0e: [io  0x0060]
[    0.194699] pnp 00:0e: [io  0x0064]
[    0.194703] pnp 00:0e: [irq 1]
[    0.194731] pnp 00:0e: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.194926] pnp 00:0f: [irq 4]
[    0.194930] pnp 00:0f: [dma 0 disabled]
[    0.194931] pnp 00:0f: [io  0x03f8-0x03ff]
[    0.194980] pnp 00:0f: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.195003] pnp 00:10: [mem 0xf0000000-0xf3ffffff]
[    0.195035] system 00:10: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.195037] system 00:10: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.195156] pnp 00:11: [mem 0x00000000-0x0009ffff]
[    0.195157] pnp 00:11: [mem 0x000c0000-0x000cffff]
[    0.195159] pnp 00:11: [mem 0x000e0000-0x000fffff]
[    0.195160] pnp 00:11: [mem 0x00100000-0xdfffffff]
[    0.195162] pnp 00:11: [mem 0x00000000-0xffffffffffffffff disabled]
[    0.195202] system 00:11: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.195204] system 00:11: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.195206] system 00:11: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.195208] system 00:11: [mem 0x00100000-0xdfffffff] could not be reserved
[    0.195210] system 00:11: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.195303] pnp: PnP ACPI: found 18 devices
[    0.195304] ACPI: ACPI bus type pnp unregistered
[    0.195307] PnPBIOS: Disabled by ACPI PNP
[    0.230924] PCI: max bus depth: 1 pci_try_num: 2
[    0.230955] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf4000000-0xf41fffff 64bit pref]
[    0.230957] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.230959] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
[    0.230962] pci 0000:00:01.0:   bridge window [mem 0xfa000000-0xfe9fffff]
[    0.230964] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.230968] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
[    0.230970] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[    0.230973] pci 0000:00:1c.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.230976] pci 0000:00:1c.0:   bridge window [mem 0xf4000000-0xf41fffff 64bit pref]
[    0.230981] pci 0000:00:1c.3: PCI bridge to [bus 02-02]
[    0.230983] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.230987] pci 0000:00:1c.3:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.230990] pci 0000:00:1c.3:   bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[    0.230994] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
[    0.230995] pci 0000:00:1e.0:   bridge window [io  disabled]
[    0.230999] pci 0000:00:1e.0:   bridge window [mem disabled]
[    0.231002] pci 0000:00:1e.0:   bridge window [mem pref disabled]
[    0.231019] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.231022] pci 0000:00:01.0: setting latency timer to 64
[    0.231027] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.231030] pci 0000:00:1c.0: setting latency timer to 64
[    0.231038] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.231042] pci 0000:00:1c.3: setting latency timer to 64
[    0.231047] pci 0000:00:1e.0: setting latency timer to 64
[    0.231050] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.231051] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.231053] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.231055] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.231056] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xffffffff]
[    0.231058] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
[    0.231060] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfe9fffff]
[    0.231062] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[    0.231063] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.231065] pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
[    0.231067] pci_bus 0000:03: resource 2 [mem 0xf4000000-0xf41fffff 64bit pref]
[    0.231068] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.231070] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.231072] pci_bus 0000:02: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
[    0.231074] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
[    0.231075] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
[    0.231077] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[    0.231078] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
[    0.231080] pci_bus 0000:04: resource 8 [mem 0xe0000000-0xffffffff]
[    0.231110] NET: Registered protocol family 2
[    0.231162] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.231326] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.231643] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.231794] TCP: Hash tables configured (established 131072 bind 65536)
[    0.231796] TCP reno registered
[    0.231798] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.231803] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.231865] NET: Registered protocol family 1
[    0.231965] pci 0000:01:00.0: Boot video device
[    0.231972] PCI: CLS 32 bytes, default 64
[    0.232216] audit: initializing netlink socket (disabled)
[    0.232223] type=2000 audit(1319542689.228:1): initialized
[    0.251754] highmem bounce pool size: 64 pages
[    0.251758] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.262515] VFS: Disk quotas dquot_6.5.2
[    0.262567] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.263036] fuse init (API version 7.16)
[    0.263099] msgmni has been set to 1627
[    0.263323] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.263340] io scheduler noop registered
[    0.263342] io scheduler deadline registered
[    0.263351] io scheduler cfq registered (default)
[    0.263428] pcieport 0000:00:01.0: setting latency timer to 64
[    0.263452] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.263484] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.263511] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    0.263554] pcieport 0000:00:1c.3: setting latency timer to 64
[    0.263582] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[    0.263638] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.263655] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.263702] intel_idle: MWAIT substates: 0x220
[    0.263704] intel_idle: does not run on family 6 model 15
[    0.263763] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.263767] ACPI: Power Button [PWRB]
[    0.263796] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.263799] ACPI: Power Button [PWRF]
[    0.263820] ACPI: acpi_idle registered with cpuidle
[    0.265225] ERST: Table is not found!
[    0.265279] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.285562] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.285660] isapnp: Scanning for PnP cards...
[    0.355732] Freeing initrd memory: 13320k freed
[    0.638349] isapnp: No Plug & Play device found
[    0.696495] 00:0f: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.696705] Linux agpgart interface v0.103
[    0.697655] brd: module loaded
[    0.698054] loop: module loaded
[    0.698178] ata_piix 0000:00:1f.1: version 2.13
[    0.698195] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.698224] ata_piix 0000:00:1f.1: setting latency timer to 64
[    0.698443] scsi0 : ata_piix
[    0.698500] scsi1 : ata_piix
[    0.699320] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    0.699322] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    0.699340] ata_piix 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[    0.699345] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.699373] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.699560] scsi2 : ata_piix
[    0.699604] scsi3 : ata_piix
[    0.700560] ata3: SATA max UDMA/133 cmd 0xb400 ctl 0xb080 bmdma 0xa880 irq 22
[    0.700562] ata4: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa888 irq 22
[    0.700813] Fixed MDIO Bus: probed
[    0.700830] PPP generic driver version 2.4.2
[    0.700856] tun: Universal TUN/TAP device driver, 1.6
[    0.700857] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.700920] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.700935] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.700943] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.700945] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.700968] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.700982] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    0.700990] ehci_hcd 0000:00:1d.7: debug port 1
[    0.704859] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.704869] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9ffbc00
[    0.720020] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.720135] hub 1-0:1.0: USB hub found
[    0.720140] hub 1-0:1.0: 8 ports detected
[    0.720215] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.720224] uhci_hcd: USB Universal Host Controller Interface driver
[    0.720239] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.720243] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.720245] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.720267] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.720286] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b480
[    0.720370] hub 2-0:1.0: USB hub found
[    0.720373] hub 2-0:1.0: 2 ports detected
[    0.720414] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.720418] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.720420] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.720443] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.720468] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b800
[    0.720548] hub 3-0:1.0: USB hub found
[    0.720551] hub 3-0:1.0: 2 ports detected
[    0.720590] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.720594] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.720596] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.720619] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.720643] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b880
[    0.720720] hub 4-0:1.0: USB hub found
[    0.720723] hub 4-0:1.0: 2 ports detected
[    0.720766] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    0.720770] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.720773] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.720794] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.720818] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000bc00
[    0.720895] hub 5-0:1.0: USB hub found
[    0.720897] hub 5-0:1.0: 2 ports detected
[    0.720978] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.720979] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.721464] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.721521] mousedev: PS/2 mouse device common for all mice
[    0.721606] rtc_cmos 00:03: RTC can wake from S4
[    0.721676] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.721695] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.721748] device-mapper: uevent: version 1.0.3
[    0.721797] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[    0.721819] EISA: Probing bus 0 at eisa.0
[    0.721821] EISA: Cannot allocate resource for mainboard
[    0.721823] Cannot allocate resource for EISA slot 1
[    0.721824] Cannot allocate resource for EISA slot 2
[    0.721825] Cannot allocate resource for EISA slot 3
[    0.721827] Cannot allocate resource for EISA slot 4
[    0.721828] Cannot allocate resource for EISA slot 5
[    0.721829] Cannot allocate resource for EISA slot 6
[    0.721830] Cannot allocate resource for EISA slot 7
[    0.721832] Cannot allocate resource for EISA slot 8
[    0.721833] EISA: Detected 0 cards.
[    0.721839] cpufreq-nforce2: No nForce2 chipset.
[    0.721841] cpuidle: using governor ladder
[    0.721842] cpuidle: using governor menu
[    0.721843] EFI Variables Facility v0.08 2004-May-17
[    0.722051] TCP cubic registered
[    0.722145] NET: Registered protocol family 10
[    0.722558] NET: Registered protocol family 17
[    0.722568] Registering the dns_resolver key type
[    0.722580] Using IPI No-Shortcut mode
[    0.722632] PM: Hibernation image not present or could not be loaded.
[    0.722643] registered taskstats version 1
[    0.731985]   Magic number: 15:649:631
[    0.732056] rtc_cmos 00:03: setting system clock to 2011-10-25 11:38:09 UTC (1319542689)
[    0.732391] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.732392] EDD information not available.
[    0.742575] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    0.868360] ata1.00: ATAPI: HL-DT-STDVD-RAM GH22NP20, 1.02, max UDMA/66
[    0.876166] ata3.00: ATA-7: WDC WD3200AAJS-65RYA0, 12.01B01, max UDMA/133
[    0.876170] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    0.884222] ata1.00: configured for UDMA/66
[    0.886243] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVD-RAM GH22NP20 1.02 PQ: 0 ANSI: 5
[    0.888193] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    0.888196] cdrom: Uniform CD-ROM driver Revision: 3.20
[    0.888287] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    0.888322] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    0.892266] ata4.00: ATA-8: WDC WD5000AAKS-00M9A0, 05.01D05, max UDMA/133
[    0.892269] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    0.896316] ata3.01: ATA-8: WDC WD5000AAKS-00YGA0, 12.01C02, max UDMA/133
[    0.896319] ata3.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    0.908254] ata4.00: configured for UDMA/133
[    0.912121] ata3.00: configured for UDMA/133
[    0.928821] ata3.01: configured for UDMA/133
[    0.928904] scsi 2:0:0:0: Direct-Access     ATA      WDC WD3200AAJS-6 12.0 PQ: 0 ANSI: 5
[    0.929008] sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    0.929019] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    0.929043] sd 2:0:0:0: [sda] Write Protect is off
[    0.929045] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.929063] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.929084] scsi 2:0:1:0: Direct-Access     ATA      WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5
[    0.929151] sd 2:0:1:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    0.929162] sd 2:0:1:0: Attached scsi generic sg2 type 0
[    0.929183] sd 2:0:1:0: [sdb] Write Protect is off
[    0.929186] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[    0.929201] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.929229] scsi 3:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-0 05.0 PQ: 0 ANSI: 5
[    0.929306] sd 3:0:0:0: Attached scsi generic sg3 type 0
[    0.929388] sd 3:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    0.929431] sd 3:0:0:0: [sdc] Write Protect is off
[    0.929434] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    0.929453] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.952589]  sdc: sdc1 sdc2 sdc3 < sdc5 sdc6 >
[    0.952869] sd 3:0:0:0: [sdc] Attached SCSI disk
[    1.032079] usb 1-3: new high speed USB device number 2 using ehci_hcd
[    1.041142]  sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 > sdb3 sdb4
[    1.052135]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[    1.052413] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.052419] sd 2:0:1:0: [sdb] Attached SCSI disk
[    1.052475] Freeing unused kernel memory: 720k freed
[    1.052628] Write protecting the kernel text: 5496k
[    1.052670] Write protecting the kernel read-only data: 2232k
[    1.052671] NX-protecting the kernel data: 4744k
[    1.063479] udevd[89]: starting version 173
[    1.093952] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.093968] r8169 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    1.093998] r8169 0000:02:00.0: setting latency timer to 64
[    1.094044] r8169 0000:02:00.0: irq 43 for MSI/MSI-X
[    1.094399] r8169 0000:02:00.0: eth0: RTL8168c/8111c at 0xf8416000, 20:cf:30:ec:50:11, XID 1c4000c0 IRQ 43
[    1.106886] firewire_ohci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.106892] firewire_ohci 0000:03:00.0: setting latency timer to 64
[    1.125179] Floppy drive(s): fd0 is 1.44M
[    1.143821] FDC 0 is a post-1991 82077
[    1.168093] firewire_ohci: Added fw-ohci device 0000:03:00.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
[    1.228096] Refined TSC clocksource calibration: 3294.608 MHz.
[    1.228101] Switching to clocksource tsc
[    1.632081] usb 4-1: new low speed USB device number 2 using uhci_hcd
[    1.668142] firewire_core: created device fw0: GUID 0011066600000011, S400
[    1.829208] input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input3
[    1.829280] generic-usb 0003:046D:C50E.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1d.2-1/input0
[    1.829289] usbcore: registered new interface driver usbhid
[    1.829290] usbhid: USB HID core driver
[    2.166250] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
[   16.990167] udevd[349]: starting version 173
[   17.037892] lp: driver loaded but no devices found
[   17.038842] Adding 3943920k swap on /dev/sdb6.  Priority:-1 extents:1 across:3943920k 
[   17.131981] type=1400 audit(1319535505.893:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=467 comm="apparmor_parser"
[   17.132275] type=1400 audit(1319535505.897:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=467 comm="apparmor_parser"
[   17.132451] type=1400 audit(1319535505.897:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=467 comm="apparmor_parser"
[   17.136707] intel_rng: FWH not detected
[   17.156096] parport_pc 00:07: reported by Plug and Play ACPI
[   17.156194] parport0: PC-style at 0x378 (0x778), irq 7
[   17.156305] leds_ss4200: no LED devices found
[   17.156746] , dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[   17.199849] nvidia: module license 'NVIDIA' taints kernel.
[   17.199851] Disabling lock debugging due to kernel taint
[   17.256114] lp0: using parport0 (interrupt-driven).
[   17.416184] ppdev: user-space parallel port driver
[   17.583915] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   17.583953] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[   17.583971] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   17.594732] Linux video capture interface: v2.00
[   17.595668] uvcvideo: Found UVC 1.00 device <unnamed> (046d:09a4)
[   17.610338] input: UVC Camera (046d:09a4) as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.0/input/input4
[   17.610486] usbcore: registered new interface driver uvcvideo
[   17.610488] USB Video Class driver (v1.1.0)
[   17.630098] hda_codec: ALC887: BIOS auto-probing.
[   17.641002] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[   18.033689] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   18.033696] nvidia 0000:01:00.0: setting latency timer to 64
[   18.033699] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   18.033834] NVRM: loading NVIDIA UNIX x86 Kernel Module  280.13  Wed Jul 27 16:55:43 PDT 2011
[   18.608183] 2:3:1: cannot set freq 16000 to ep 0x86
[   18.608332] set volume quirk for QuickCam E3500
[   18.608485] usbcore: registered new interface driver snd-usb-audio
[   19.360367] init: udev-fallback-graphics main process (842) terminated with status 1
[   28.152982] EXT4-fs (sdb3): re-mounted. Opts: errors=remount-ro
[   28.222542] EXT3-fs: barriers not enabled
[   28.235032] kjournald starting.  Commit interval 5 seconds
[   28.235312] EXT3-fs (sdb8): using internal journal
[   28.235316] EXT3-fs (sdb8): mounted filesystem with ordered data mode
[   28.758520] type=1400 audit(1319535517.521:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=941 comm="apparmor_parser"
[   28.758913] type=1400 audit(1319535517.521:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=941 comm="apparmor_parser"
[   28.762838] type=1400 audit(1319535517.525:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=945 comm="apparmor_parser"
[   28.764029] type=1400 audit(1319535517.529:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=944 comm="apparmor_parser"
[   28.764600] type=1400 audit(1319535517.529:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=945 comm="apparmor_parser"
[   28.764779] type=1400 audit(1319535517.529:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=945 comm="apparmor_parser"
[   28.770718] type=1400 audit(1319535517.533:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=947 comm="apparmor_parser"
[   28.788179] type=1400 audit(1319535517.553:12): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=950 comm="apparmor_parser"
[   28.791193] type=1400 audit(1319535517.553:13): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=947 comm="apparmor_parser"
[   28.792350] type=1400 audit(1319535517.557:14): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=950 comm="apparmor_parser"
[   28.847511] r8169 0000:02:00.0: eth0: link down
[   28.847517] r8169 0000:02:00.0: eth0: link down
[   28.847652] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   28.870633] init: failsafe main process (888) killed by TERM signal
[   28.871239] init: apport pre-start process (1006) terminated with status 1
[   28.886530] init: apport post-stop process (1040) terminated with status 1
[   28.967594] vboxdrv: Found 2 processor cores.
[   28.968060] vboxdrv: fAsync=0 offMin=0x2be offMax=0x10fb
[   28.969656] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   28.969658] vboxdrv: Successfully loaded version 4.1.4 (interface 0x00190000).
[   29.176791] vboxpci: IOMMU not found (not registered)
[   29.197012] Bluetooth: Core ver 2.16
[   29.197028] NET: Registered protocol family 31
[   29.197030] Bluetooth: HCI device and connection manager initialized
[   29.197031] Bluetooth: HCI socket layer initialized
[   29.197033] Bluetooth: L2CAP socket layer initialized
[   29.197326] Bluetooth: SCO socket layer initialized
[   29.198785] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   29.198787] Bluetooth: BNEP filters: protocol multicast
[   29.201821] Bluetooth: RFCOMM TTY layer initialized
[   29.201824] Bluetooth: RFCOMM socket layer initialized
[   29.201825] Bluetooth: RFCOMM ver 1.11
[   29.477343] EXT4-fs (sdb3): re-mounted. Opts: errors=remount-ro,commit=0
[   30.018026] init: plymouth-upstart-bridge main process (933) killed by TERM signal
[   30.534929] r8169 0000:02:00.0: eth0: link up
[   30.535036] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   31.174548] EXT4-fs (sdb3): re-mounted. Opts: errors=remount-ro,commit=0
[   31.764087] 2:3:1: cannot get freq at ep 0x86
[   40.944043] eth0: no IPv6 routers present
[   56.260149] 2:3:1: cannot get freq at ep 0x86
[  273.466047] irq_handler: 18 callbacks suppressed
[  273.466050] firewire_ohci: isochronous cycle inconsistent
[  274.054764] firewire_core: created device fw1: GUID 0800460103d3146a, S100
[  274.054770] firewire_core: phy config: card 0, new root=ffc1, gap_count=5
[  463.086103] firewire_ohci: isochronous cycle inconsistent
[  463.675420] firewire_core: created device fw1: GUID 0800460103d3146a, S100
[  463.675425] firewire_core: phy config: card 0, new root=ffc1, gap_count=5
enzo@oneiric:~$ 

[Sga72]

scusa Cristian, ma come si fa a lanciare Kdenlive da terminale?  :-[ :-[ :-[

[cristian_c]

scusa Cristian, ma come si fa a lanciare Kdenlive da terminale?  :-[ :-[ :-[

Codice: Seleziona tutto

kdenlive

[Sga72]

mi mancano proprio le basi  :-[

la risposta è questa

Codice: Seleziona tutto

(kdenlive:2286): Gtk-WARNING **: Impossibile trovare il motore del tema in module_path: «pixmap»,

(kdenlive:2286): Gtk-WARNING **: Impossibile trovare il motore del tema in module_path: «pixmap»,

(kdenlive:2286): Gtk-WARNING **: Impossibile trovare il motore del tema in module_path: «pixmap»,

(kdenlive:2286): Gtk-WARNING **: Impossibile trovare il motore del tema in module_path: «pixmap»,
project monitor connected 
clip monitor connected 
QWidget::insertAction: Attempt to insert null action
QWidget::insertAction: Attempt to insert null action

[cristian_c]

mi mancano proprio le basi  :-[

la risposta è questa

Codice: Seleziona tutto

(kdenlive:2286): Gtk-WARNING **: Impossibile trovare il motore del tema in module_path: «pixmap»,

(kdenlive:2286): Gtk-WARNING **: Impossibile trovare il motore del tema in module_path: «pixmap»,

(kdenlive:2286): Gtk-WARNING **: Impossibile trovare il motore del tema in module_path: «pixmap»,

(kdenlive:2286): Gtk-WARNING **: Impossibile trovare il motore del tema in module_path: «pixmap»,
project monitor connected 
clip monitor connected 
QWidget::insertAction: Attempt to insert null action
QWidget::insertAction: Attempt to insert null action

e non ti da la possibilità di selezionare la videocamera, giusto?