Capire il log di GSmartControl

basic · Messaggio da **basic** » venerdì 28 ottobre 2011, 19:48

Ciau ^^ come da titolo vorrei comprendere meglio il log creato dal performad-test esteso di GSmartControl, infatti in quello corto sembrava tutto ok, come da lettura dei dati diretti smart (oltre i 13 settori ricollocati), ma facendo il test lungo il risultato sembra negativo, lo è? e quanto?

Il test è fatto su un notebook di 10 anni con Xubuntu 10.10 lo fatto perchè alcuni file scaricati dal web erano corrotti, ma non so se è dovuto all'HD o connessione.

Se fosse a causa dell'HD cosa mi consigliate... di utilizzare un tool per riparare le falle o meglio fare un formattazione "lenta" o l'HD è irrecuperabile?

Ciao e grazie

Ecco il log:

Codice: Seleziona tutto

smartctl 5.40 2010-03-16 r3077 [i686-pc-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     HITACHI Travelstar DK23XX/DK23XXB series
Device Model:     HITACHI_DK23EA-20
Serial Number:    2P8304
Firmware Version: 00K5A0F0
User Capacity:    20,003,880,960 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   5
ATA Standard is:  ATA/ATAPI-5 T13 1321D revision 3
Local Time is:    Fri Oct 28 14:32:49 2011 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      ( 119)	The previous self-test completed having
					the read element of the test failed.
Total time to complete Offline 
data collection: 		 ( 940) seconds.
Offline data collection
capabilities: 			 (0x1b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					No Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					No General Purpose Logging support.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  16) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000d   100   100   050    Pre-fail  Offline      -       8589934595
  2 Throughput_Performance  0x0005   100   100   050    Pre-fail  Offline      -       3938
  3 Spin_Up_Time            0x0007   100   100   050    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   096   096   000    Old_age   Always       -       4950
  5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       13
  7 Seek_Error_Rate         0x000f   100   100   050    Pre-fail  Always       -       759
  8 Seek_Time_Performance   0x0005   100   100   050    Pre-fail  Offline      -       1203
  9 Power_On_Minutes        0x0032   087   087   000    Old_age   Always       -       6644h+25m
 10 Spin_Retry_Count        0x0013   100   100   050    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   096   096   000    Old_age   Always       -       4943
191 G-Sense_Error_Rate      0x000a   100   099   000    Old_age   Always       -       96
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       17
193 Load_Cycle_Count        0x0032   072   072   000    Old_age   Always       -       169768/169750
194 Temperature_Celsius     0x0022   100   070   000    Old_age   Always       -       31 (Lifetime Min/Max 13/55)
195 Hardware_ECC_Recovered  0x001a   100   005   000    Old_age   Always       -       4553
196 Reallocated_Event_Count 0x0032   099   099   000    Old_age   Always       -       13
197 Current_Pending_Sector  0x0032   100   097   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0012   100   100   000    Old_age   Always       -       0
201 Soft_Read_Error_Rate    0x0012   100   100   000    Old_age   Always       -       0
223 Load_Retry_Count        0x0012   100   100   000    Old_age   Always       -       0
230 Head_Amplitude          0x0032   090   090   000    Old_age   Always       -       312123
250 Read_Error_Retry_Rate   0x000a   100   040   000    Old_age   Always       -       241

SMART Error Log Version: 1
ATA Error Count: 3865 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 3865 occurred at disk power-on lifetime: 6642 hours (276 days + 18 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  10 51 04 64 0c 60 e0  Error: IDNF 4 sectors at LBA = 0x00600c64 = 6294628

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 60 0c 60 e0 00      02:33:49.600  READ DMA
  f8 00 00 00 00 00 e0 00      02:33:49.600  READ NATIVE MAX ADDRESS
  ec 00 00 00 00 00 a0 02      02:33:49.590  IDENTIFY DEVICE
  ef 03 45 00 00 00 a0 02      02:33:49.590  SET FEATURES [Set transfer mode]
  f8 00 00 00 00 00 e0 00      02:33:49.590  READ NATIVE MAX ADDRESS

Error 3864 occurred at disk power-on lifetime: 6642 hours (276 days + 18 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  10 51 04 64 0c 60 e0  Error: IDNF 4 sectors at LBA = 0x00600c64 = 6294628

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 60 0c 60 e0 00      02:33:47.480  READ DMA
  f8 00 00 00 00 00 e0 00      02:33:47.480  READ NATIVE MAX ADDRESS
  ec 00 00 00 00 00 a0 02      02:33:47.470  IDENTIFY DEVICE
  ef 03 45 00 00 00 a0 02      02:33:47.460  SET FEATURES [Set transfer mode]
  f8 00 00 00 00 00 e0 00      02:33:47.460  READ NATIVE MAX ADDRESS

Error 3863 occurred at disk power-on lifetime: 6642 hours (276 days + 18 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  10 51 04 64 0c 60 e0  Error: IDNF 4 sectors at LBA = 0x00600c64 = 6294628

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 60 0c 60 e0 00      02:33:45.390  READ DMA
  f8 00 00 00 00 00 e0 00      02:33:45.390  READ NATIVE MAX ADDRESS
  ec 00 00 00 00 00 a0 02      02:33:45.380  IDENTIFY DEVICE
  ef 03 45 00 00 00 a0 02      02:33:45.370  SET FEATURES [Set transfer mode]
  f8 00 00 00 00 00 e0 00      02:33:45.370  READ NATIVE MAX ADDRESS

Error 3862 occurred at disk power-on lifetime: 6642 hours (276 days + 18 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  10 51 04 64 0c 60 e0  Error: IDNF 4 sectors at LBA = 0x00600c64 = 6294628

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 60 0c 60 e0 00      02:33:43.290  READ DMA
  f8 00 00 00 00 00 e0 00      02:33:43.290  READ NATIVE MAX ADDRESS
  ec 00 00 00 00 00 a0 02      02:33:43.280  IDENTIFY DEVICE
  ef 03 45 00 00 00 a0 02      02:33:43.270  SET FEATURES [Set transfer mode]
  f8 00 00 00 00 00 e0 00      02:33:43.270  READ NATIVE MAX ADDRESS

Error 3861 occurred at disk power-on lifetime: 6642 hours (276 days + 18 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  10 51 04 64 0c 60 e0  Error: IDNF 4 sectors at LBA = 0x00600c64 = 6294628

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 60 0c 60 e0 00      02:33:41.200  READ DMA
  f8 00 00 00 00 00 e0 00      02:33:41.200  READ NATIVE MAX ADDRESS
  ec 00 00 00 00 00 a0 02      02:33:41.190  IDENTIFY DEVICE
  ef 03 45 00 00 00 a0 02      02:33:41.190  SET FEATURES [Set transfer mode]
  f8 00 00 00 00 00 e0 00      02:33:41.190  READ NATIVE MAX ADDRESS

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed: read failure       70%      6644         0
# 2  Short offline       Completed without error       00%      6644         -
# 3  Short offline       Completed without error       00%      6633         -
# 4  Short offline       Aborted by host               60%      6631         -
# 5  Short offline       Aborted by host               60%      6457         -
# 6  Short offline       Aborted by host               60%      6451         -
# 7  Short offline       Aborted by host               60%      6450         -

Device does not support Selective Self Tests/Logging

cristian_c · Messaggio da **cristian_c** » sabato 29 ottobre 2011, 1:58

Prova a guardare gli ultimi commenti: http://www.linuxjournal.com/magazine/monitoring-hard-disks-smart

jset · Messaggio da **jset** » martedì 4 novembre 2014, 16:26

Salve,
riapro la discussione per chiedere un aiuto per la comprensione del log di GSmartControl.
Dopo alcuni problemi di perdita dati ed errori di sistema, mi e' venuto il dubbio che l'hard disk possa essere rovinato.
Ho letto la guida su linuxjournal e ci sono errori nella sezione 4 del log. Il problema e' che il test si interrompe al 10% a causa di un errore di lettura.
Posso considerare l'hard disk andato?

jset · Messaggio da **jset** » martedì 4 novembre 2014, 19:04

In questo modo e' piu' agevole guardarlo

Codice: Seleziona tutto

smartctl 6.2 2013-07-26 r3841 [i686-linux-3.13.0-32-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Hitachi Travelstar 5K320
Device Model:     Hitachi HTS543225L9SA00
Serial Number:    081220FB2E00LKKL023A
LU WWN Device Id: 5 000cca 55ff27572
Firmware Version: FBEOC43C
User Capacity:    250,059,350,016 bytes [250 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    5400 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 3f
SATA Version is:  SATA 2.6, 1.5 Gb/s
Local Time is:    Tue Nov  4 15:10:34 2014 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      ( 121)	The previous self-test completed having
					the read element of the test failed.
Total time to complete Offline 
data collection: 		(  645) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 102) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   080   080   062    Pre-fail  Always       -       12386888
  2 Throughput_Performance  0x0005   100   100   040    Pre-fail  Offline      -       0
  3 Spin_Up_Time            0x0007   253   253   033    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0012   098   098   000    Old_age   Always       -       4391
  5 Reallocated_Sector_Ct   0x0033   088   088   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   100   100   040    Pre-fail  Offline      -       0
  9 Power_On_Hours          0x0012   090   090   000    Old_age   Always       -       4435
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   098   098   000    Old_age   Always       -       3562
191 G-Sense_Error_Rate      0x000a   098   098   000    Old_age   Always       -       131074
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       31
193 Load_Cycle_Count        0x0012   098   098   000    Old_age   Always       -       24641
194 Temperature_Celsius     0x0002   177   177   000    Old_age   Always       -       31 (Min/Max 11/46)
196 Reallocated_Event_Count 0x0032   093   093   000    Old_age   Always       -       761
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       410
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0
223 Load_Retry_Count        0x000a   100   100   000    Old_age   Always       -       0

SMART Error Log Version: 1
ATA Error Count: 78 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 78 occurred at disk power-on lifetime: 4425 hours (184 days + 9 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 09 0b 01 3c e8  Error: UNC 9 sectors at LBA = 0x083c010b = 138150155

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 14 00 01 3c e0 00      00:00:11.500  READ DMA EXT
  25 00 26 1a e0 3b e0 00      00:00:11.400  READ DMA EXT
  25 00 1a 00 e0 3b e0 00      00:00:08.200  READ DMA EXT
  25 00 25 db df 3b e0 00      00:00:08.000  READ DMA EXT
  25 00 1b c0 df 3b e0 00      00:00:08.000  READ DMA EXT

Error 77 occurred at disk power-on lifetime: 4398 hours (183 days + 6 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 03 45 75 7b e1  Error: UNC 3 sectors at LBA = 0x017b7545 = 24868165

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 40 75 7b e0 08      00:36:31.600  READ DMA EXT
  ef 10 02 00 00 00 a0 08      00:36:31.600  SET FEATURES [Enable SATA feature]
  27 00 00 00 00 00 e0 08      00:36:31.600  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 08      00:36:31.600  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 08      00:36:31.600  SET FEATURES [Set transfer mode]

Error 76 occurred at disk power-on lifetime: 4398 hours (183 days + 6 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 03 45 75 7b e1  Error: UNC 3 sectors at LBA = 0x017b7545 = 24868165

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 40 75 7b e0 08      00:36:27.400  READ DMA EXT
  c8 00 08 f8 1f d1 e1 08      00:36:27.300  READ DMA
  c8 00 08 f0 1f d1 e1 08      00:36:27.300  READ DMA
  c8 00 08 e8 1f d1 e1 08      00:36:27.300  READ DMA
  c8 00 08 e0 1f d1 e1 08      00:36:27.300  READ DMA

Error 75 occurred at disk power-on lifetime: 4398 hours (183 days + 6 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 03 45 75 7b e1  Error: UNC 3 sectors at LBA = 0x017b7545 = 24868165

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 40 75 7b e0 08      00:36:22.900  READ DMA EXT
  35 00 08 60 67 43 e0 08      00:36:22.900  WRITE DMA EXT
  ea 00 00 00 00 00 a0 08      00:36:22.700  FLUSH CACHE EXT
  35 00 08 00 e1 7b e0 08      00:36:22.700  WRITE DMA EXT
  35 00 08 88 e0 7b e0 08      00:36:22.700  WRITE DMA EXT

Error 74 occurred at disk power-on lifetime: 4398 hours (183 days + 6 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 03 45 75 7b e1  Error: UNC 3 sectors at LBA = 0x017b7545 = 24868165

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 40 75 7b e0 08      00:36:18.600  READ DMA EXT
  35 00 08 50 e1 3b e0 08      00:36:18.600  WRITE DMA EXT
  35 00 10 18 e1 3b e0 08      00:36:18.600  WRITE DMA EXT
  35 00 10 40 26 7d e0 08      00:36:18.600  WRITE DMA EXT
  35 00 08 60 04 7c e0 08      00:36:18.600  WRITE DMA EXT

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed: read failure       90%      4435         310799458
# 2  Extended offline    Completed: read failure       90%      4431         316347238
# 3  Short offline       Completed without error       00%      4430         -
# 4  Extended offline    Completed: read failure       90%      4430         301932813

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

cristian_c

Da uno dei commenti al link che avevo postato:

Your disk has one or more unreadable sectors. This does NOT mean that the disk is failing, but it has lost some information on those sectors. Run an extended self test:

smartctl -t long /dev/hda (PATA disk)
smartctl -t long -d ata /dev/sda (SATA disk)

Kioji · Messaggio da **Kioji** » sabato 11 febbraio 2017, 10:13

Grazie a chi mi aiuta a capire:

questo è un hd che uso per backup... quindi mi serve un certo grado di sicurezza.
Copio ed incollo qui il logo del test:

Codice: Seleziona tutto

smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.16.0-4-amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.11
Device Model:     ST31500341AS
Serial Number:    9VS42GLM
LU WWN Device Id: 5 000c50 02085cc05
Firmware Version: CC1H
User Capacity:    1,500,301,910,016 bytes [1.50 TB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    7200 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 2.6, 3.0 Gb/s
Local Time is:    Sat Feb 11 10:06:01 2017 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(  617) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 ( 296) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x103f)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   120   099   006    Pre-fail  Always       -       238461856
  3 Spin_Up_Time            0x0003   100   100   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       224
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       11
  7 Seek_Error_Rate         0x000f   078   060   030    Pre-fail  Always       -       78520359
  9 Power_On_Hours          0x0032   078   078   000    Old_age   Always       -       19488
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   037   020    Old_age   Always       -       274
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   099   000    Old_age   Always       -       5
189 High_Fly_Writes         0x003a   092   092   000    Old_age   Always       -       8
190 Airflow_Temperature_Cel 0x0022   063   049   045    Old_age   Always       -       37 (Min/Max 20/38)
194 Temperature_Celsius     0x0022   037   051   000    Old_age   Always       -       37 (0 14 0 0 0)
195 Hardware_ECC_Recovered  0x001a   035   021   000    Old_age   Always       -       238461856
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       19484 (124 153 0)
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       4008748248
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       253695607

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     19488         -
# 2  Short offline       Completed without error       00%     19466         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

tra gli attributes il " 5 Reallocated_Sector_" mi compare evidenziato.... che vuol dire?

Forum Ubuntu-it

Capire il log di GSmartControl

Capire il log di GSmartControl

Re: Capire il log di GSmartControl

Re: Capire il log di GSmartControl

Re: Capire il log di GSmartControl

Re: Capire il log di GSmartControl

Re: Capire il log di GSmartControl

Chi c’è in linea

Accedi • Iscriviti