Mouse non riconosciuto

[Tux1]

Salve a tutti, ho un mouse trust "ami mouse scroll pro" excellence series (non ottico, a "palla") che quando collego ad Ubuntu tramite la porta ps/2 (quindi non usb) non viene nemmeno riconosciuto.
Tramite il comando lsusb da terminale non mi spunta nemmeno la periferica.
Mi interesserebbe farlo partire e quindi poterlo usare dato che è un mouse con una precisione ed una ergonomicità da far invidia a migliaia di altri mouse.
Idee?????
Grazie.

[Alka-Seltzer PLUS]

Ciao !

Dato che non è usb perché hai provato a trovarlo tra le periferiche usb ?

Io piuttosto proverei con:

Codice: Seleziona tutto

sudo lshw

Ora, se non ricordo male, le periferiche che si collegano tramite porta ps/2 andrebbero collegate prima dell' accensione del computer: hai già provato a procedere in tal senso ?

[Tux1]

Ma certo!!!! vero, le periferiche ps/2 si collegano a pc spento!........grazie per l'idea, più tardi, penso domani faccio sapere com'è finita, al momento ho da fare .

[Tux1]

Purtoppo mettendo il mouse prima dell'accensione non parte lo stesso......
Questo è il risultato del comando "sudo lshw":

Codice: Seleziona tutto

description: Desktop Computer
    product: To Be Filled By O.E.M.
    vendor: To Be Filled By O.E.M.
    version: To Be Filled By O.E.M.
    serial: To Be Filled By O.E.M.
    width: 32 bits
    capabilities: smbios-2.4 dmi-2.4 smp-1.4 smp
    configuration: boot=normal chassis=desktop cpus=2 uuid=00020003-0004-0005-0006-000700080009
  *-core
       description: Motherboard
       product: N68-S
       vendor: ASRock
       physical id: 0
     *-firmware
          description: BIOS
          vendor: American Megatrends Inc.
          physical id: 0
          version: P1.50 (07/17/2009)
          size: 64KiB
          capacity: 448KiB
          capabilities: pci upgrade shadowing cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification netboot
     *-cpu:0
          description: CPU
          product: AMD Athlon(tm) 5000 Dual-Core Processor
          vendor: Advanced Micro Devices [AMD]
          physical id: 3
          bus info: cpu@0
          version: 15.4.2
          serial: To Be Filled By O.E.M.
          slot: CPUSocket
          size: 2200MHz
          capacity: 2200MHz
          width: 64 bits
          clock: 200MHz
          capabilities: boot fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp x86-64 3dnowext 3dnow constant_tsc nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt npt lbrv svm_lock nrip_save cpufreq
        *-cache:0
             description: L1 cache
             physical id: 5
             slot: L1-Cache
             size: 128KiB
             capacity: 256KiB
             capabilities: pipeline-burst internal varies data
        *-cache:1
             description: L2 cache
             physical id: 6
             slot: L2-Cache
             size: 512KiB
             capacity: 1MiB
             capabilities: pipeline-burst internal varies unified
     *-memory:0
          description: System Memory
          physical id: e
          slot: System board or motherboard
          size: 2GiB
        *-bank:0
             description: DIMM DDR2 Synchronous 533 MHz (1.9 ns)
             product: PartNum0
             vendor: Manufacturer0
             physical id: 0
             serial: SerNum0
             slot: DIMM0
             size: 2GiB
             width: 64 bits
             clock: 533MHz (1.9ns)
        *-bank:1
             description: DIMM [empty]
             product: PartNum1
             vendor: Manufacturer1
             physical id: 1
             serial: SerNum1
             slot: DIMM1
     *-cpu:1
          physical id: 4
          bus info: cpu@1
          version: 15.4.2
          size: 800MHz
          capacity: 800MHz
          capabilities: cpufreq
        *-cache:0
             description: L1 cache
             physical id: 0
             size: 128KiB
        *-cache:1
             description: L2 cache
             physical id: 1
             size: 512KiB
     *-memory:1 UNCLAIMED
          description: RAM memory
          product: MCP61 LPC Bridge
          vendor: nVidia Corporation
          physical id: a
          bus info: pci@0000:00:00.0
          version: a1
          width: 32 bits
          clock: 66MHz (15.2ns)
          capabilities: ht bus_master cap_list
          configuration: latency=0
     *-isa
          description: ISA bridge
          product: MCP61 LPC Bridge
          vendor: nVidia Corporation
          physical id: 1
          bus info: pci@0000:00:01.0
          version: a2
          width: 32 bits
          clock: 66MHz
          capabilities: isa bus_master
          configuration: latency=0
          resources: ioport:900(size=256)
     *-serial
          description: SMBus
          product: MCP61 SMBus
          vendor: nVidia Corporation
          physical id: 1.1
          bus info: pci@0000:00:01.1
          version: a2
          width: 32 bits
          clock: 66MHz
          capabilities: pm cap_list
          configuration: driver=nForce2_smbus latency=0
          resources: irq:11 ioport:ec00(size=64) ioport:600(size=64) ioport:700(size=64)
     *-memory:2 UNCLAIMED
          description: RAM memory
          product: MCP61 Memory Controller
          vendor: nVidia Corporation
          physical id: 1.2
          bus info: pci@0000:00:01.2
          version: a2
          width: 32 bits
          clock: 66MHz (15.2ns)
          configuration: latency=0
     *-usb:0
          description: USB Controller
          product: MCP61 USB Controller
          vendor: nVidia Corporation
          physical id: 2
          bus info: pci@0000:00:02.0
          version: a3
          width: 32 bits
          clock: 66MHz
          capabilities: pm ohci bus_master cap_list
          configuration: driver=ohci_hcd latency=0 maxlatency=1 mingnt=3
          resources: irq:20 memory:fbfff000-fbffffff
     *-usb:1
          description: USB Controller
          product: MCP61 USB Controller
          vendor: nVidia Corporation
          physical id: 2.1
          bus info: pci@0000:00:02.1
          version: a3
          width: 32 bits
          clock: 66MHz
          capabilities: debug pm ehci bus_master cap_list
          configuration: driver=ehci_hcd latency=0 maxlatency=1 mingnt=3
          resources: irq:21 memory:fbffec00-fbffecff
     *-pci:0
          description: PCI bridge
          product: MCP61 PCI bridge
          vendor: nVidia Corporation
          physical id: 100
          bus info: pci@0000:00:04.0
          version: a1
          width: 32 bits
          clock: 66MHz
          capabilities: pci ht subtractive_decode bus_master cap_list
     *-multimedia
          description: Audio device
          product: MCP61 High Definition Audio
          vendor: nVidia Corporation
          physical id: 5
          bus info: pci@0000:00:05.0
          version: a2
          width: 32 bits
          clock: 66MHz
          capabilities: pm msi ht bus_master cap_list
          configuration: driver=HDA Intel latency=0 maxlatency=5 mingnt=2
          resources: irq:22 memory:fbff8000-fbffbfff
     *-ide:0
          description: IDE interface
          product: MCP61 IDE
          vendor: nVidia Corporation
          physical id: 6
          bus info: pci@0000:00:06.0
          version: a2
          width: 32 bits
          clock: 66MHz
          capabilities: ide pm bus_master cap_list
          configuration: driver=pata_amd latency=0 maxlatency=1 mingnt=3
          resources: irq:0 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:ffa0(size=16)
     *-bridge
          description: Ethernet interface
          product: MCP61 Ethernet
          vendor: nVidia Corporation
          physical id: 7
          bus info: pci@0000:00:07.0
          logical name: eth0
          version: a2
          serial: 00:19:66:ff:13:d3
          capacity: 100000000
          width: 32 bits
          clock: 66MHz
          capabilities: bridge pm msi ht bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
          configuration: autonegotiation=on broadcast=yes driver=forcedeth driverversion=0.64 latency=0 link=no maxlatency=20 mingnt=1 multicast=yes port=MII
          resources: irq:43 memory:fbffd000-fbffdfff ioport:e480(size=8)
     *-ide:1
          description: IDE interface
          product: MCP61 SATA Controller
          vendor: nVidia Corporation
          physical id: 8
          bus info: pci@0000:00:08.0
          logical name: scsi3
          logical name: scsi4
          version: a2
          width: 32 bits
          clock: 66MHz
          capabilities: ide pm msi ht bus_master cap_list emulated
          configuration: driver=sata_nv latency=0 maxlatency=1 mingnt=3
          resources: irq:23 ioport:e400(size=8) ioport:e080(size=4) ioport:e000(size=8) ioport:dc00(size=4) ioport:d880(size=16) memory:fbffc000-fbffcfff
        *-disk
             description: ATA Disk
             product: WDC WD5000AAKS-0
             vendor: Western Digital
             physical id: 0
             bus info: scsi@3:0.0.0
             logical name: /dev/sda
             version: 01.0
             serial: WD-WCAYU0290237
             size: 465GiB (500GB)
             capabilities: partitioned partitioned:dos
             configuration: ansiversion=5 signature=000405cf
           *-volume:0
                description: EXT4 volume
                vendor: Linux
                physical id: 1
                bus info: scsi@3:0.0.0,1
                logical name: /dev/sda1
                logical name: /
                version: 1.0
                serial: bed3eb24-70d6-44ec-93fb-1d4c310e7438
                size: 459GiB
                capacity: 459GiB
                capabilities: primary bootable journaled extended_attributes large_files huge_files dir_nlink extents ext4 ext2 initialized
                configuration: created=2011-07-14 00:52:54 filesystem=ext4 lastmountpoint=/m�Ҁ���8Y�����P�!�8Y��@�(���(���������h�Y�!�} modified=2011-11-10 17:28:35 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,barrier=1,data=ordered mounted=2011-11-14 16:08:04 state=mounted
           *-volume:1
                description: Extended partition
                physical id: 2
                bus info: scsi@3:0.0.0,2
                logical name: /dev/sda2
                size: 5998MiB
                capacity: 5998MiB
                capabilities: primary extended partitioned partitioned:extended
              *-logicalvolume
                   description: Linux swap / Solaris partition
                   physical id: 5
                   logical name: /dev/sda5
                   capacity: 5998MiB
                   capabilities: nofs
        *-cdrom
             description: DVD-RAM writer
             product: DVDRAM GH22NS40
             vendor: HL-DT-ST
             physical id: 1
             bus info: scsi@4:0.0.0
             logical name: /dev/cdrom
             logical name: /dev/cdrw
             logical name: /dev/dvd
             logical name: /dev/dvdrw
             logical name: /dev/scd0
             logical name: /dev/sr0
             version: NL02
             capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram
             configuration: ansiversion=5 status=nodisc
     *-ide:2
          description: IDE interface
          product: MCP61 SATA Controller
          vendor: nVidia Corporation
          physical id: 8.1
          bus info: pci@0000:00:08.1
          version: a2
          width: 32 bits
          clock: 66MHz
          capabilities: ide pm msi ht bus_master cap_list
          configuration: driver=sata_nv latency=0 maxlatency=1 mingnt=3
          resources: irq:22 ioport:d800(size=8) ioport:d480(size=4) ioport:d400(size=8) ioport:d080(size=4) ioport:d000(size=16) memory:fbff7000-fbff7fff
     *-pci:1
          description: PCI bridge
          product: MCP61 PCI Express bridge
          vendor: nVidia Corporation
          physical id: 9
          bus info: pci@0000:00:09.0
          version: a2
          width: 32 bits
          clock: 33MHz
          capabilities: pci pm msi ht pciexpress normal_decode bus_master cap_list
          configuration: driver=pcieport
          resources: irq:40
     *-pci:2
          description: PCI bridge
          product: MCP61 PCI Express bridge
          vendor: nVidia Corporation
          physical id: b
          bus info: pci@0000:00:0b.0
          version: a2
          width: 32 bits
          clock: 33MHz
          capabilities: pci pm msi ht pciexpress normal_decode bus_master cap_list
          configuration: driver=pcieport
          resources: irq:41
     *-pci:3
          description: PCI bridge
          product: MCP61 PCI Express bridge
          vendor: nVidia Corporation
          physical id: c
          bus info: pci@0000:00:0c.0
          version: a2
          width: 32 bits
          clock: 33MHz
          capabilities: pci pm msi ht pciexpress normal_decode bus_master cap_list
          configuration: driver=pcieport
          resources: irq:42
     *-display
          description: VGA compatible controller
          product: C61 [GeForce 7025 / nForce 630a]
          vendor: nVidia Corporation
          physical id: d
          bus info: pci@0000:00:0d.0
          version: a2
          width: 64 bits
          clock: 66MHz
          capabilities: pm msi vga_controller bus_master cap_list rom
          configuration: driver=nvidia latency=0
          resources: irq:21 memory:fa000000-faffffff memory:e0000000-efffffff memory:f9000000-f9ffffff memory:fbfc0000-fbfdffff
     *-pci:4
          description: Host bridge
          product: Family 10h Processor HyperTransport Configuration
          vendor: Advanced Micro Devices [AMD]
          physical id: 101
          bus info: pci@0000:00:18.0
          version: 00
          width: 32 bits
          clock: 33MHz
     *-pci:5
          description: Host bridge
          product: Family 10h Processor Address Map
          vendor: Advanced Micro Devices [AMD]
          physical id: 102
          bus info: pci@0000:00:18.1
          version: 00
          width: 32 bits
          clock: 33MHz
     *-pci:6
          description: Host bridge
          product: Family 10h Processor DRAM Controller
          vendor: Advanced Micro Devices [AMD]
          physical id: 103
          bus info: pci@0000:00:18.2
          version: 00
          width: 32 bits
          clock: 33MHz
     *-pci:7
          description: Host bridge
          product: Family 10h Processor Miscellaneous Control
          vendor: Advanced Micro Devices [AMD]
          physical id: 104
          bus info: pci@0000:00:18.3
          version: 00
          width: 32 bits
          clock: 33MHz
     *-pci:8
          description: Host bridge
          product: Family 10h Processor Link Control
          vendor: Advanced Micro Devices [AMD]
          physical id: 105
          bus info: pci@0000:00:18.4
          version: 00
          width: 32 bits
          clock: 33MHz
     *-scsi
          physical id: f
          bus info: usb@1:3
          logical name: scsi9
          capabilities: emulated scsi-host
          configuration: driver=usb-storage
        *-disk
             description: SCSI Disk
             physical id: 0.0.0
             bus info: scsi@9:0.0.0
             logical name: /dev/sdb
  *-network
       description: Wireless interface
       physical id: 1
       bus info: usb@1:5
       logical name: wlan0
       serial: 00:26:5a:06:c7:0b
       capabilities: ethernet physical wireless
       configuration: broadcast=yes driver=rt73usb driverversion=2.6.35-30-generic firmware=N/A ip=192.168.1.4 link=yes multicast=yes wireless=IEEE 802.11bg

[Alka-Seltzer PLUS]

Hai già provato il mouse in un altro computer ? Ed un altro mouse in questo ?

[magozurlinux]

Da terminale col mouse usb inserito, postami questi comandi:

Codice: Seleziona tutto

lsusb

Codice: Seleziona tutto

dmesg | grep Mouse

Codice: Seleziona tutto

dmesg | grep usb

[Tux1]

Il mouse non è usb, è con la porta ps/2 come ho già detto.
cmq ho già provato su win e funziona.

[Janvitus]

@Tux1 prossima volta usa la funzione "inserisci codice" quando riporti cose lunghe.

[magozurlinux]

Fai questa prova;

premi Ctrl Alt F1, entrerai nel terminale in modo testo, inserisci username e password, poi dai questi comandi:

Codice: Seleziona tutto

sudo -s

Codice: Seleziona tutto

cat /var/log/Xorg.0.log | grep PS/2

Codice: Seleziona tutto

exit

Codice: Seleziona tutto

sudo service gdm restart

Da terminale postami questo comando:

Codice: Seleziona tutto

dmesg | grep Mouse

[Tux1]

Grazie per la dritta janvitus.
Comunque digitando il comando da postare esce questo

Codice: Seleziona tutto

[    2.753616] input: USB Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-6/2-6:1.0/input/input3
[    2.753772] generic-usb 0003:1BCF:0007.0001: input,hiddev96,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:02.0-6/input0
salvo@salvo-desktop:~$ dmesg | grep Mouse
[    2.753616] input: USB Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2

[Tux1]

Idee per farlo partire?

[magozurlinux]

[    2.753616] input: USB Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-6/2-6:1.0/input/input3
[    2.753772] generic-usb 0003:1BCF:0007.0001: input,hiddev96,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:02.0-6/input0
salvo@salvo-desktop:~$ dmesg | grep Mouse
[    2.753616] input: USB Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2

Hai detto che il mouse è PS/2; il comando che mi hai postato dovevi darlo col mouse PS/2 e non usb.  ;D

[willy@localhost ~]$ dmesg | grep Mouse
[    2.382730] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4

il mio mouse è usb con adattatore usb - PS/2.

[magozurlinux]

Un modo per farlo funzionare è quello di aggiungere le righe per il mouse dentro il file /etc/X11/xorg.conf.

da terminale dai questo comando:

Codice: Seleziona tutto

sudo gedit /etc/X11/xorg.conf

il file sarà vuoto; aggiungi queste righe:

Codice: Seleziona tutto

Section "InputDevice"
   Identifier "Mouse0"
   Driver "mouse"
   Option "Protocol"    "auto"
   Option "Device"     "/dev/input/mice"
   Option "Buttons"     "5"
   Option "ZAxisMapping"  "4 5"
   Option "CorePointer"
   Option "SendCoreEvents" "true"
EndSection

salva ed esci dall'editor di testo.

Riavvia il pc.

[Tux1]

Cmq il file non è vuoto, all'interno sono presenti un bel pò di impostazioni, dove lo metto? te lo posto:

Codice: Seleziona tutto

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 285.05.09  (buildd@lemon)  Thu Oct 13 04:08:37 UTC 2011


Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
    Option         "Xinerama" "0"
EndSection

Section "Files"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"

    # HorizSync source: builtin, VertRefresh source: builtin
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "CRT-0"
    HorizSync       30.0 - 85.0
    VertRefresh     50.0 - 150.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 7025 / nForce 630a"
EndSection

Section "Screen"

# Removed Option "metamodes" "1152x864 +0+0"
# Removed Option "metamodes" "1280x1024 +0+0; 1280x960 +0+0; 1024x768 +0+0"
# Removed Option "metamodes" "1280x1024_75 +0+0; 1280x1024 +0+0; 1280x960 +0+0; 1024x768 +0+0"
# Removed Option "metamodes" "1600x1024 +0+0; 1280x1024 +0+0; 1280x960 +0+0; 1024x768 +0+0"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "TwinViewXineramaInfoOrder" "CRT-0"
    Option         "metamodes" "1440x900 +0+0; 1024x768 +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

[magozurlinux]

Hai già i parametri per il mouse in /etc/X11/xorg.conf:

Codice: Seleziona tutto

Section "InputDevice"

    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

prova a modificare con questi parametri (evidenziati in rosso):

Section "InputDevice"
   Identifier "Mouse0"
   Driver "mouse"
   Option "Protocol" "IMPS/2"
   Option "Device" "/dev/input/mouse0"
   Option "Emulate3Buttons" "no"
   Option "ZAxisMapping" "4 5"
EndSection

salva ed esci dall'editor di testo.

Riavvia il pc.

[Tux1]

Fatto, ma non va lo stesso, ho pure provato a scollegare l'altro mouse usb e riavviare il pc ma niente.

[magozurlinux]

Fai questa prova col mouse PS/2 e usb inseriti;

premi Ctrl Alt F1, entrerai nel terminale in modo testo, inserisci username e password, poi dai questi comandi:

Codice: Seleziona tutto

sudo -s

Codice: Seleziona tutto

cat /var/log/Xorg.0.log | grep PS/2

Codice: Seleziona tutto

exit

Codice: Seleziona tutto

sudo service gdm restart

Da terminale postami questo comando:

Codice: Seleziona tutto

dmesg | grep Mouse

[Tux1]

Non posso fare sudo gdm restart o quello che è perché mi si impalla il pc e lo devo riavviare.

[Tux1]

Cmq l'ultimo comando da questo:

Codice: Seleziona tutto

[   10.708902] input: USB Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-6/2-6:1.0/input/input3
[   10.709054] generic-usb 0003:1BCF:0007.0001: input,hiddev96,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:02.0-6/input0
[   14.604385] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input4

[magozurlinux]

[   10.708902] input: USB Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-6/2-6:1.0/input/input3
[   10.709054] generic-usb 0003:1BCF:0007.0001: input,hiddev96,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:02.0-6/input0
[   14.604385] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input4

quello evidenziato in rosso è il tuo mouse PS/2 correttamente riconosciuto.