[RISOLTO] Installazione driver (e relativa configurazione ottimale) Matrox G450

Riconoscimento, installazione e configurazione delle periferiche.
Immagine Hardware e driver Immagine Amministrazione del sistema • Dispositivi e partizioni • Driver video • Log di sistema • Pagina hardware • Periferiche senza fili • Stampanti e scanner
Scrivi risposta
Avatar utente
cristian_c
Accecante Asceta
Accecante Asceta
Messaggi: 23422
Iscrizione: lunedì 29 ottobre 2007, 11:31

Re: Installazione driver (e relativa configurazione ottimale) per Matrox G450

Messaggio da cristian_c »

simpaticoteppei ha scritto: ci sono in gestione pacchetti....e poi?
controlla la versione di xserver-xorg  :)
UP! Unreal Project: il futuro inizia qui. Crusade è tra noi
È scienza!
Ritorna su
Avatar utente
simpaticoteppei
Prode Principiante
Messaggi: 184
Iscrizione: venerdì 1 ottobre 2010, 10:39
Distribuzione: Linux Mint 18 64 Bit
Sesso: Maschile
Località: BARI

Re: Installazione driver (e relativa configurazione ottimale) per Matrox G450

Messaggio da simpaticoteppei »

cristian_c appena andrò a casa riproverò! ;)

Solo una piccola curiosità ma eventualmente occorre modicare il file xorg.conf?.....come consigliato da questo post?

Codice: Seleziona tutto

Section "ServerLayout"
	# SERVER = SCREEN + INPUT DEVICE
	Identifier	"LayoutZero"
	Screen 0  	"ScreenZero" 0 0
	InputDevice	"KeyboardZero"		"CoreKeyboard"
	InputDevice	"MouseZero"		"CorePointer"
EndSection

Section "InputDevice"
	# MOUSE
	Identifier	"MouseZero"
	Driver		"mouse"
	Option		"Protocol"		"auto"
	Option		"Device"		"/dev/psaux"
	Option		"Emulate3Buttons"	"no"
	Option		"ZAxisMapping"		"4 5"
EndSection

Section "InputDevice"
	# TASTIERA
	Identifier	"KeyboardZero"
	Driver		"kbd"
	Option		"XkbRules"		"xorg"
	Option		"XkbModel"		"pc105"
	Option		"XkbLayout"		"it"
EndSection

Section "Device"
	# SCHEDA VIDEO
	Identifier	"VideoZero"
	Driver		"trident"
EndSection

Section "Monitor"
	# MONITOR
	Identifier	"MonitorZero"
	HorizSync	30.0 - 83.0
	VertRefresh	56.0 - 75.0
	Option		"DPMS"
	[b]Option		"TargetRefresh"		"60"
	Option		"PreferredMode"		"1280x1024"[/b]
EndSection

Section "Screen"
	# SCREEN = SCHEDA VIDEO + MONITOR
	Identifier	"ScreenZero"
	Monitor		"MonitorZero"
	Device		"VideoZero"
	DefaultDepth	24
		[b]SubSection "Display"
			Depth	24
			Modes	"1280x1024" "1024x768" "800x600" "640x480"[/b]
		EndSubSection
EndSection
Grazie!
Ritorna su
Avatar utente
cristian_c
Accecante Asceta
Accecante Asceta
Messaggi: 23422
Iscrizione: lunedì 29 ottobre 2007, 11:31

Re: Installazione driver (e relativa configurazione ottimale) per Matrox G450

Messaggio da cristian_c »

Solo una piccola curiosità ma eventualmente occorre modicare il file xorg.conf?.....come consigliato da questo post?
quale post?  ???
UP! Unreal Project: il futuro inizia qui. Crusade è tra noi
È scienza!
Ritorna su
Avatar utente
simpaticoteppei
Prode Principiante
Messaggi: 184
Iscrizione: venerdì 1 ottobre 2010, 10:39
Distribuzione: Linux Mint 18 64 Bit
Sesso: Maschile
Località: BARI

Re: Installazione driver (e relativa configurazione ottimale) per Matrox G450

Messaggio da simpaticoteppei »

Questo....
scubadive66 ha scritto: dopo varie peripezie, e dopo aver lasciato il mio "scassone" al mio amico che ti ha rimesso le mani, è finalmente giunto a risoluzione del problema, forzandogli la risoluzione e indicandogli la scheda video che nel mio caso è una trident !
il testo immesso sul file xorg.conf è il seguente:
Section "ServerLayout"
# SERVER = SCREEN + INPUT DEVICE
Identifier "LayoutZero"
Screen 0  "ScreenZero" 0 0
InputDevice "KeyboardZero" "CoreKeyboard"
InputDevice "MouseZero" "CorePointer"
EndSection

Section "InputDevice"
# MOUSE
Identifier "MouseZero"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
# TASTIERA
Identifier "KeyboardZero"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "it"
EndSection

Section "Device"
# SCHEDA VIDEO
Identifier "VideoZero"
Driver "trident"
EndSection

Section "Monitor"
# MONITOR
Identifier "MonitorZero"
HorizSync 30.0 - 83.0
VertRefresh 56.0 - 75.0
Option "DPMS"
Option "TargetRefresh" "60"
Option "PreferredMode" "1280x1024"
EndSection

Section "Screen"
# SCREEN = SCHEDA VIDEO + MONITOR
Identifier "ScreenZero"
Monitor "MonitorZero"
Device "VideoZero"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection

con questo finalmente anche con il KVM switch il monitor tiene la risoluzione di 1280x1024 che gli abbiamo impostato.
sperando che questa nostra esperienza possa risultare utile a qualcuno.....
saluti a tutti

Alessandro
Ritorna su
Avatar utente
cristian_c
Accecante Asceta
Accecante Asceta
Messaggi: 23422
Iscrizione: lunedì 29 ottobre 2007, 11:31

Re: Installazione driver (e relativa configurazione ottimale) per Matrox G450

Messaggio da cristian_c »

Non riesco a capire cosa c'entra questo post con il problema del driver oggetto di questo topic  ;D
UP! Unreal Project: il futuro inizia qui. Crusade è tra noi
È scienza!
Ritorna su
Avatar utente
simpaticoteppei
Prode Principiante
Messaggi: 184
Iscrizione: venerdì 1 ottobre 2010, 10:39
Distribuzione: Linux Mint 18 64 Bit
Sesso: Maschile
Località: BARI

Re: Installazione driver (e relativa configurazione ottimale) per Matrox G450

Messaggio da simpaticoteppei »

Perchè penso,correggimi se sbaglio, che magari si potrebbe aggiungere nel mio xorg.conf questi altri parametri:

Codice: Seleziona tutto

 Option      "DPMS"
   Option      "TargetRefresh"      "60"
   Option      "PreferredMode"      "1280x1024"
   Modes   "1280x1024" "1024x768" "800x600" "640x480"
Ritorna su
Avatar utente
cristian_c
Accecante Asceta
Accecante Asceta
Messaggi: 23422
Iscrizione: lunedì 29 ottobre 2007, 11:31

Re: Installazione driver (e relativa configurazione ottimale) per Matrox G450

Messaggio da cristian_c »

simpaticoteppei ha scritto: Perchè penso,correggimi se sbaglio, che magari si potrebbe aggiungere nel mio xorg.conf questi altri parametri:

Codice: Seleziona tutto

 Option      "DPMS"
   Option      "TargetRefresh"      "60"
   Option      "PreferredMode"      "1280x1024"
   Modes   "1280x1024" "1024x768" "800x600" "640x480"
Il problema più che altro è che non viene proprio utilizzato dal sistema il driver mga  :-\
UP! Unreal Project: il futuro inizia qui. Crusade è tra noi
È scienza!
Ritorna su
Avatar utente
simpaticoteppei
Prode Principiante
Messaggi: 184
Iscrizione: venerdì 1 ottobre 2010, 10:39
Distribuzione: Linux Mint 18 64 Bit
Sesso: Maschile
Località: BARI

Re: Installazione driver (e relativa configurazione ottimale) per Matrox G450

Messaggio da simpaticoteppei »

Scusami, quindi io il driver non ho installato?  :o ???
Ritorna su
Avatar utente
cristian_c
Accecante Asceta
Accecante Asceta
Messaggi: 23422
Iscrizione: lunedì 29 ottobre 2007, 11:31

Re: Installazione driver (e relativa configurazione ottimale) per Matrox G450

Messaggio da cristian_c »

simpaticoteppei ha scritto: Scusami, quindi io il driver non ho installato?  :o ???
Guardando lspci pare che il driver non risulti installato  :-\
Aspettiamo di vedere quale versione del server X stai utilizzando  (yes)
UP! Unreal Project: il futuro inizia qui. Crusade è tra noi
È scienza!
Ritorna su
Avatar utente
simpaticoteppei
Prode Principiante
Messaggi: 184
Iscrizione: venerdì 1 ottobre 2010, 10:39
Distribuzione: Linux Mint 18 64 Bit
Sesso: Maschile
Località: BARI

Re: Installazione driver (e relativa configurazione ottimale) per Matrox G450

Messaggio da simpaticoteppei »

ok
Ritorna su
Avatar utente
simpaticoteppei
Prode Principiante
Messaggi: 184
Iscrizione: venerdì 1 ottobre 2010, 10:39
Distribuzione: Linux Mint 18 64 Bit
Sesso: Maschile
Località: BARI

Re: Installazione driver (e relativa configurazione ottimale) per Matrox G450

Messaggio da simpaticoteppei »

cristian_c ha scritto:
simpaticoteppei ha scritto: ci sono in gestione pacchetti....e poi?
controlla la versione di xserver-xorg  :)
cristian_c,
eccoti la schermata che ti descrivono la versione dell xserver.org:
1°
[img width=800 height=600]http://img210.imageshack.us/img210/5727/schermata1dk.png[/img]
2°
[img width=800 height=600]http://img213.imageshack.us/img213/5049/schermata2l.png[/img]
3°
[img width=800 height=600]http://img231.imageshack.us/img231/3328/schermata3i.png[/img]
4°
[img width=800 height=600]http://img84.imageshack.us/img84/9990/schermata4q.png[/img]

Grazie :)
Ritorna su
Avatar utente
cristian_c
Accecante Asceta
Accecante Asceta
Messaggi: 23422
Iscrizione: lunedì 29 ottobre 2007, 11:31

Re: Installazione driver (e relativa configurazione ottimale) per Matrox G450

Messaggio da cristian_c »

A questo punto era meglio utilizzare dpkg in un terminale al posto degli screenshot  ;D

Posta tutto il contenuto del file Xorg.0.log (o allegalo al topic)  ;)
UP! Unreal Project: il futuro inizia qui. Crusade è tra noi
È scienza!
Ritorna su
Avatar utente
simpaticoteppei
Prode Principiante
Messaggi: 184
Iscrizione: venerdì 1 ottobre 2010, 10:39
Distribuzione: Linux Mint 18 64 Bit
Sesso: Maschile
Località: BARI

Re: Installazione driver (e relativa configurazione ottimale) per Matrox G450

Messaggio da simpaticoteppei »

Codice: Seleziona tutto

X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-29-server i686 Ubuntu
Current Operating System: Linux ADAVTANGE9 2.6.32-35-generic #78-Ubuntu SMP Tue Oct 11 15:27:15 UTC 2011 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-35-generic root=UUID=77866a33-255e-47bf-a5d6-57a7425b198f ro quiet splash nomodeset video=uvesafb:mode_option=1024x768-24,mtrr=3,scroll=ywrap
Build Date: 20 October 2011  03:05:54PM
xorg-server 2:1.7.6-2ubuntu7.10 (For technical support please see http://www.ubuntu.com/support) 
Current version of pixman: 0.16.4
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Nov 23 22:11:50 2011
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/usr/lib/X11/xorg.conf.d"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(**) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
	built-ins,
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
	built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x81f0e80
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 6.0
	X.Org XInput driver : 7.0
	X.Org Server Extension : 2.0
(++) using VT number 7

(--) PCI:*(0:1:0:0) 102b:0525:102b:0641 Matrox Graphics, Inc. MGA G400/G450 rev 130, Mem @ 0xe8000000/33554432, 0xe4000000/16384, 0xe5000000/8388608, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.1.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "mga"
(II) Loading /usr/lib/xorg/modules/drivers/mga_drv.so
(II) Module mga: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.4.11
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 6.0
(II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w,
	mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI,
	mgag200 SE A PCI, mgag200 SE B PCI, mgag200 EV Maxim,
	mgag200 eW Nuvoton, mgag200eH, mgag400, mgag550
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 0.1.0
	ABI class: X.Org Video Driver, version 6.0
(--) MGA(0): Chipset: "mgag400" (G450)
(--) MGA(0): Linear framebuffer at 0xE8000000
(--) MGA(0): MMIO registers at 0xE4000000
(--) MGA(0): Pseudo-DMA transfer window at 0xE5000000
(==) MGA(0): Depth 24, (--) framebuffer bpp 32
(==) MGA(0): RGB weight 888
(==) MGA(0): Using AGP 1x mode
(==) MGA(0): Using HW cursor
(==) MGA(0): Using XAA acceleration
(--) MGA(0): Video BIOS info block at offset 0x07720
(==) MGA(0): VideoRAM: 32768 kByte
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) MGA(0): I2C bus "DDC P1" initialized.
(II) MGA(0): I2C device "DDC P1:ddc2" registered at address 0xA0.
(II) MGA(0): I2C device "DDC P1:DDC control interface" registered at address 0x6E.
(--) MGA(0): No DDC signal
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.1.0
	ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.0.0
	ABI class: X.Org Video Driver, version 6.0
(II) MGA(0): initializing int10
(II) MGA(0): Primary V_BIOS segment is: 0xc000
(II) MGA(0): VESA BIOS detected
(II) MGA(0): VESA VBE Version 3.0
(II) MGA(0): VESA VBE Total Mem: 32768 kB
(II) MGA(0): VESA VBE OEM: Matrox Graphics Inc.
(II) MGA(0): VESA VBE OEM Software Rev: 1.2
(II) MGA(0): VESA VBE OEM Vendor: Matrox
(II) MGA(0): VESA VBE OEM Product: Matrox G450
(II) MGA(0): VESA VBE OEM Product Rev: 00
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) MGA(0): VESA VBE DDC supported
(II) MGA(0): VESA VBE DDC Level none
(II) MGA(0): VESA VBE DDC transfer in appr. 0 sec.
(II) MGA(0): VESA VBE DDC read failed
(==) MGA(0): Using gamma correction (1.0, 1.0, 1.0)
(==) MGA(0): Min pixel clock is 17 MHz
(--) MGA(0): Max pixel clock is 600 MHz
(II) MGA(0): Monitor0: Using hsync range of 30.00-92.00 kHz
(II) MGA(0): Monitor0: Using vrefresh range of 50.00-160.00 Hz
(WW) MGA(0): Unable to estimate virtual size
(II) MGA(0): Clock range:  17.75 to 600.00 MHz
(II) MGA(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
(II) MGA(0): Not using default mode "800x600" (hsync out of range)
(II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
(II) MGA(0): Not using default mode "800x600" (hsync out of range)
(II) MGA(0): Not using default mode "1792x1344" (hsync out of range)
(II) MGA(0): Not using default mode "896x672" (hsync out of range)
(II) MGA(0): Not using default mode "1856x1392" (hsync out of range)
(II) MGA(0): Not using default mode "928x696" (hsync out of range)
(II) MGA(0): Not using default mode "1920x1440" (hsync out of range)
(II) MGA(0): Not using default mode "960x720" (hsync out of range)
(II) MGA(0): Not using default mode "1360x768" (monitor doesn't support reduced blanking)
(II) MGA(0): Not using default mode "1400x1050" (hsync out of range)
(II) MGA(0): Not using default mode "700x525" (hsync out of range)
(II) MGA(0): Not using default mode "1680x1050" (monitor doesn't support reduced blanking)
(II) MGA(0): Not using default mode "1680x1050" (hsync out of range)
(II) MGA(0): Not using default mode "840x525" (hsync out of range)
(II) MGA(0): Not using default mode "1920x1080" (monitor doesn't support reduced blanking)
(II) MGA(0): Not using default mode "1920x1200" (monitor doesn't support reduced blanking)
(II) MGA(0): Not using default mode "1920x1440" (hsync out of range)
(II) MGA(0): Not using default mode "960x720" (hsync out of range)
(II) MGA(0): Not using default mode "2048x1536" (hsync out of range)
(II) MGA(0): Not using default mode "1024x768" (hsync out of range)
(II) MGA(0): Not using default mode "2048x1536" (hsync out of range)
(II) MGA(0): Not using default mode "1024x768" (hsync out of range)
(II) MGA(0): Not using default mode "2048x1536" (hsync out of range)
(II) MGA(0): Not using default mode "1024x768" (hsync out of range)
(--) MGA(0): Has SDRAM
(--) MGA(0): Virtual size is 1920x1440 (pitch 1920)
(**) MGA(0): *Default mode "1920x1440": 234.0 MHz, 90.0 kHz, 60.0 Hz
(II) MGA(0): Modeline "1920x1440"x60.0  234.00  1920 2048 2256 2600  1440 1441 1444 1500 -hsync +vsync (90.0 kHz)
(**) MGA(0): *Default mode "1856x1392": 218.3 MHz, 86.4 kHz, 60.0 Hz
(II) MGA(0): Modeline "1856x1392"x60.0  218.30  1856 1952 2176 2528  1392 1393 1396 1439 -hsync +vsync (86.4 kHz)
(**) MGA(0): *Default mode "1792x1344": 204.8 MHz, 83.7 kHz, 60.0 Hz
(II) MGA(0): Modeline "1792x1344"x60.0  204.80  1792 1920 2120 2448  1344 1345 1348 1394 -hsync +vsync (83.7 kHz)
(**) MGA(0): *Default mode "1600x1200": 189.0 MHz, 87.5 kHz, 70.0 Hz
(II) MGA(0): Modeline "1600x1200"x70.0  189.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (87.5 kHz)
(**) MGA(0): *Default mode "1600x1200": 175.5 MHz, 81.2 kHz, 65.0 Hz
(II) MGA(0): Modeline "1600x1200"x65.0  175.50  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (81.2 kHz)
(**) MGA(0): *Default mode "1600x1200": 162.0 MHz, 75.0 kHz, 60.0 Hz
(II) MGA(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
(**) MGA(0): *Default mode "1680x1050": 187.0 MHz, 82.3 kHz, 74.9 Hz
(II) MGA(0): Modeline "1680x1050"x74.9  187.00  1680 1800 1976 2272  1050 1053 1059 1099 -hsync +vsync (82.3 kHz)
(**) MGA(0): *Default mode "1680x1050": 174.0 MHz, 76.6 kHz, 69.9 Hz
(II) MGA(0): Modeline "1680x1050"x69.9  174.00  1680 1800 1976 2272  1050 1053 1059 1096 -hsync +vsync (76.6 kHz)
(**) MGA(0): *Default mode "1680x1050": 146.2 MHz, 65.3 kHz, 60.0 Hz
(II) MGA(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(**) MGA(0): *Default mode "1400x1050": 155.8 MHz, 81.5 kHz, 74.8 Hz
(II) MGA(0): Modeline "1400x1050"x74.8  155.80  1400 1464 1784 1912  1050 1052 1064 1090 +hsync +vsync (81.5 kHz)
(**) MGA(0): *Default mode "1400x1050": 145.1 MHz, 76.5 kHz, 70.0 Hz
(II) MGA(0): Modeline "1400x1050"x70.0  145.06  1400 1496 1648 1896  1050 1051 1054 1093 -hsync +vsync (76.5 kHz)
(**) MGA(0): *Default mode "1400x1050": 122.0 MHz, 64.9 kHz, 60.0 Hz
(II) MGA(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz)
(**) MGA(0): *Default mode "1280x1024": 157.5 MHz, 91.1 kHz, 85.0 Hz
(II) MGA(0): Modeline "1280x1024"x85.0  157.50  1280 1344 1504 1728  1024 1025 1028 1072 +hsync +vsync (91.1 kHz)
(**) MGA(0): *Default mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz
(II) MGA(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(**) MGA(0): *Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(II) MGA(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(**) MGA(0): *Default mode "1440x900": 106.5 MHz, 55.9 kHz, 59.9 Hz
(II) MGA(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
(**) MGA(0): *Default mode "1280x960": 148.5 MHz, 85.9 kHz, 85.0 Hz
(II) MGA(0): Modeline "1280x960"x85.0  148.50  1280 1344 1504 1728  960 961 964 1011 +hsync +vsync (85.9 kHz)
(**) MGA(0): *Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(II) MGA(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
(**) MGA(0): *Default mode "1360x768": 84.8 MHz, 47.7 kHz, 59.8 Hz
(II) MGA(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz)
(**) MGA(0): *Default mode "1152x864": 143.5 MHz, 91.5 kHz, 100.0 Hz
(II) MGA(0): Modeline "1152x864"x100.0  143.47  1152 1232 1360 1568  864 865 868 915 -hsync +vsync (91.5 kHz)
(**) MGA(0): *Default mode "1152x864": 121.5 MHz, 77.5 kHz, 85.1 Hz
(II) MGA(0): Modeline "1152x864"x85.1  121.50  1152 1216 1344 1568  864 865 868 911 +hsync -vsync (77.5 kHz)
(**) MGA(0): *Default mode "1152x864": 119.7 MHz, 77.1 kHz, 85.0 Hz
(II) MGA(0): Modeline "1152x864"x85.0  119.65  1152 1224 1352 1552  864 865 868 907 -hsync +vsync (77.1 kHz)
(**) MGA(0): *Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
(II) MGA(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(**) MGA(0): *Default mode "1152x864": 105.0 MHz, 67.6 kHz, 75.0 Hz
(II) MGA(0): Modeline "1152x864"x75.0  104.99  1152 1224 1352 1552  864 865 868 902 -hsync +vsync (67.6 kHz)
(**) MGA(0): *Default mode "1152x864": 96.8 MHz, 63.0 kHz, 70.0 Hz
(II) MGA(0): Modeline "1152x864"x70.0   96.77  1152 1224 1344 1536  864 865 868 900 -hsync +vsync (63.0 kHz)
(**) MGA(0): *Default mode "1152x864": 81.6 MHz, 53.7 kHz, 60.0 Hz
(II) MGA(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 -hsync +vsync (53.7 kHz)
(**) MGA(0): *Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) MGA(0): Modeline "1024x768"x85.0   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync (68.7 kHz)
(**) MGA(0): *Default mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz
(II) MGA(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(**) MGA(0): *Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) MGA(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(**) MGA(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) MGA(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(**) MGA(0): *Default mode "1024x768": 44.9 MHz, 35.5 kHz, 86.9 Hz (I)
(II) MGA(0): Modeline "1024x768"x86.9   44.90  1024 1032 1208 1264  768 768 776 817 interlace +hsync +vsync (35.5 kHz)
(**) MGA(0): *Default mode "960x720": 117.0 MHz, 90.0 kHz, 60.0 Hz (D)
(II) MGA(0): Modeline "960x720"x60.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz)
(**) MGA(0): *Default mode "928x696": 109.2 MHz, 86.4 kHz, 60.1 Hz (D)
(II) MGA(0): Modeline "928x696"x60.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz)
(**) MGA(0): *Default mode "896x672": 102.4 MHz, 83.7 kHz, 60.0 Hz (D)
(II) MGA(0): Modeline "896x672"x60.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz)
(**) MGA(0): *Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) MGA(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(**) MGA(0): *Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) MGA(0): Modeline "800x600"x85.1   56.30  800 832 896 1048  600 601 604 631 +hsync +vsync (53.7 kHz)
(**) MGA(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) MGA(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(**) MGA(0): *Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) MGA(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(**) MGA(0): *Default mode "800x600": 94.5 MHz, 87.5 kHz, 70.0 Hz (D)
(II) MGA(0): Modeline "800x600"x70.0   94.50  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (87.5 kHz)
(**) MGA(0): *Default mode "800x600": 87.8 MHz, 81.2 kHz, 65.0 Hz (D)
(II) MGA(0): Modeline "800x600"x65.0   87.75  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (81.2 kHz)
(**) MGA(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) MGA(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(**) MGA(0): *Default mode "800x600": 81.0 MHz, 75.0 kHz, 60.0 Hz (D)
(II) MGA(0): Modeline "800x600"x60.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz)
(**) MGA(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) MGA(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(**) MGA(0): *Default mode "840x525": 93.5 MHz, 82.3 kHz, 75.0 Hz (D)
(II) MGA(0): Modeline "840x525"x75.0   93.50  840 900 988 1136  525 526 529 549 doublescan -hsync +vsync (82.3 kHz)
(**) MGA(0): *Default mode "840x525": 87.0 MHz, 76.6 kHz, 69.9 Hz (D)
(II) MGA(0): Modeline "840x525"x69.9   87.00  840 900 988 1136  525 526 529 548 doublescan -hsync +vsync (76.6 kHz)
(**) MGA(0): *Default mode "840x525": 73.1 MHz, 65.3 kHz, 60.0 Hz (D)
(II) MGA(0): Modeline "840x525"x60.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz)
(**) MGA(0): *Default mode "700x525": 77.9 MHz, 81.5 kHz, 74.8 Hz (D)
(II) MGA(0): Modeline "700x525"x74.8   77.90  700 732 892 956  525 526 532 545 doublescan +hsync +vsync (81.5 kHz)
(**) MGA(0): *Default mode "700x525": 72.5 MHz, 76.5 kHz, 70.1 Hz (D)
(II) MGA(0): Modeline "700x525"x70.1   72.53  700 748 824 948  525 525 527 546 doublescan -hsync +vsync (76.5 kHz)
(**) MGA(0): *Default mode "700x525": 61.0 MHz, 64.9 kHz, 60.0 Hz (D)
(II) MGA(0): Modeline "700x525"x60.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz)
(**) MGA(0): *Default mode "640x512": 78.8 MHz, 91.1 kHz, 85.0 Hz (D)
(II) MGA(0): Modeline "640x512"x85.0   78.75  640 672 752 864  512 512 514 536 doublescan +hsync +vsync (91.1 kHz)
(**) MGA(0): *Default mode "640x512": 67.5 MHz, 80.0 kHz, 75.0 Hz (D)
(II) MGA(0): Modeline "640x512"x75.0   67.50  640 648 720 844  512 512 514 533 doublescan +hsync +vsync (80.0 kHz)
(**) MGA(0): *Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D)
(II) MGA(0): Modeline "640x512"x60.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz)
(**) MGA(0): *Default mode "720x450": 53.2 MHz, 55.9 kHz, 59.9 Hz (D)
(II) MGA(0): Modeline "720x450"x59.9   53.25  720 760 836 952  450 451 454 467 doublescan -hsync +vsync (55.9 kHz)
(**) MGA(0): *Default mode "640x480": 74.2 MHz, 85.9 kHz, 85.1 Hz (D)
(II) MGA(0): Modeline "640x480"x85.1   74.25  640 672 752 864  480 480 482 505 doublescan +hsync +vsync (85.9 kHz)
(**) MGA(0): *Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) MGA(0): Modeline "640x480"x85.0   36.00  640 696 752 832  480 481 484 509 -hsync -vsync (43.3 kHz)
(**) MGA(0): *Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) MGA(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(**) MGA(0): *Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) MGA(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(**) MGA(0): *Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
(II) MGA(0): Modeline "640x480"x60.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz)
(**) MGA(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) MGA(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(**) MGA(0): *Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) MGA(0): Modeline "720x400"x85.0   35.50  720 756 828 936  400 401 404 446 -hsync +vsync (37.9 kHz)
(**) MGA(0): *Default mode "680x384": 36.0 MHz, 47.4 kHz, 60.0 Hz (D)
(II) MGA(0): Modeline "680x384"x60.0   36.00  680 704 720 760  384 385 390 395 doublescan +hsync -vsync (47.4 kHz)
(**) MGA(0): *Default mode "680x384": 42.4 MHz, 47.7 kHz, 59.8 Hz (D)
(II) MGA(0): Modeline "680x384"x59.8   42.38  680 716 784 888  384 385 390 399 doublescan -hsync +vsync (47.7 kHz)
(**) MGA(0): *Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) MGA(0): Modeline "640x400"x85.1   31.50  640 672 736 832  400 401 404 445 -hsync +vsync (37.9 kHz)
(**) MGA(0): *Default mode "576x432": 71.7 MHz, 91.5 kHz, 100.1 Hz (D)
(II) MGA(0): Modeline "576x432"x100.1   71.73  576 616 680 784  432 432 434 457 doublescan -hsync +vsync (91.5 kHz)
(**) MGA(0): *Default mode "576x432": 60.8 MHz, 77.5 kHz, 85.2 Hz (D)
(II) MGA(0): Modeline "576x432"x85.2   60.75  576 608 672 784  432 432 434 455 doublescan +hsync -vsync (77.5 kHz)
(**) MGA(0): *Default mode "576x432": 59.8 MHz, 77.1 kHz, 85.1 Hz (D)
(II) MGA(0): Modeline "576x432"x85.1   59.83  576 612 676 776  432 432 434 453 doublescan -hsync +vsync (77.1 kHz)
(**) MGA(0): *Default mode "576x432": 54.0 MHz, 67.5 kHz, 75.0 Hz (D)
(II) MGA(0): Modeline "576x432"x75.0   54.00  576 608 672 800  432 432 434 450 doublescan +hsync +vsync (67.5 kHz)
(**) MGA(0): *Default mode "576x432": 52.5 MHz, 67.6 kHz, 75.0 Hz (D)
(II) MGA(0): Modeline "576x432"x75.0   52.49  576 612 676 776  432 432 434 451 doublescan -hsync +vsync (67.6 kHz)
(**) MGA(0): *Default mode "576x432": 48.4 MHz, 63.0 kHz, 70.0 Hz (D)
(II) MGA(0): Modeline "576x432"x70.0   48.38  576 612 672 768  432 432 434 450 doublescan -hsync +vsync (63.0 kHz)
(**) MGA(0): *Default mode "576x432": 40.8 MHz, 53.7 kHz, 60.1 Hz (D)
(II) MGA(0): Modeline "576x432"x60.1   40.81  576 608 668 760  432 432 434 447 doublescan -hsync +vsync (53.7 kHz)
(**) MGA(0): *Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) MGA(0): Modeline "640x350"x85.1   31.50  640 672 736 832  350 382 385 445 +hsync -vsync (37.9 kHz)
(**) MGA(0): *Default mode "512x384": 47.2 MHz, 68.7 kHz, 85.0 Hz (D)
(II) MGA(0): Modeline "512x384"x85.0   47.25  512 536 584 688  384 384 386 404 doublescan +hsync +vsync (68.7 kHz)
(**) MGA(0): *Default mode "512x384": 39.4 MHz, 60.0 kHz, 75.0 Hz (D)
(II) MGA(0): Modeline "512x384"x75.0   39.38  512 520 568 656  384 384 386 400 doublescan +hsync +vsync (60.0 kHz)
(**) MGA(0): *Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(II) MGA(0): Modeline "512x384"x70.1   37.50  512 524 592 664  384 385 388 403 doublescan -hsync -vsync (56.5 kHz)
(**) MGA(0): *Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(II) MGA(0): Modeline "512x384"x60.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz)
(**) MGA(0): *Default mode "512x384": 22.4 MHz, 35.5 kHz, 86.6 Hz (D)
(II) MGA(0): Modeline "512x384"x86.6   22.45  512 516 604 632  384 384 388 409 interlace doublescan +hsync +vsync (35.5 kHz)
(**) MGA(0): *Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(II) MGA(0): Modeline "416x312"x74.7   28.64  416 432 464 576  312 312 314 333 doublescan -hsync -vsync (49.7 kHz)
(**) MGA(0): *Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D)
(II) MGA(0): Modeline "400x300"x85.3   28.15  400 416 448 524  300 300 302 315 doublescan +hsync +vsync (53.7 kHz)
(**) MGA(0): *Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(II) MGA(0): Modeline "400x300"x75.1   24.75  400 408 448 528  300 300 302 312 doublescan +hsync +vsync (46.9 kHz)
(**) MGA(0): *Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(II) MGA(0): Modeline "400x300"x72.2   25.00  400 428 488 520  300 318 321 333 doublescan +hsync +vsync (48.1 kHz)
(**) MGA(0): *Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) MGA(0): Modeline "400x300"x60.3   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz)
(**) MGA(0): *Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) MGA(0): Modeline "400x300"x56.3   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz)
(**) MGA(0): *Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D)
(II) MGA(0): Modeline "320x240"x85.2   18.00  320 348 376 416  240 240 242 254 doublescan -hsync -vsync (43.3 kHz)
(**) MGA(0): *Default mode "360x200": 17.8 MHz, 37.9 kHz, 85.0 Hz (D)
(II) MGA(0): Modeline "360x200"x85.0   17.75  360 378 414 468  200 200 202 223 doublescan -hsync +vsync (37.9 kHz)
(==) MGA(0): DPI set to (96, 96)
(II) MGA(0): YDstOrg is set to 0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.2.1
	ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(--) Depth 24 pixmap format is 32 bpp
(II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(--) MGA(0): 16 DWORD fifo
(==) MGA(0): Default visual is TrueColor
(II) MGA(0): [drm] bpp: 32 depth: 24
(II) MGA(0): [drm] Sarea 2200+664: 2864
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: node name is /dev/dri/card0
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] loaded kernel module for "mga" driver.
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) MGA(0): [drm] Using the DRM lock SAREA also for drawables.
(II) MGA(0): [drm] framebuffer handle = 0xe8000000
(II) MGA(0): [drm] added 1 reserved context for kernel
(II) MGA(0): X context handle = 0x1
(II) MGA(0): [drm] installed DRM signal handler
(II) MGA(0): [dri] visual configs initialized
(II) MGA(0): Memory manager initialized to (0,0) (1920,1488)
(II) MGA(0): Largest offscreen area available: 1920 x 48
(II) MGA(0): Reserved back buffer at offset 0xae8000
(II) MGA(0): Reserved depth buffer at offset 0x1574000
(II) MGA(0): Reserved 0 kb for textures at offset 0x2000000
(II) MGA(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	Solid filled trapezoids
	8x8 mono pattern filled rectangles
	8x8 mono pattern filled trapezoids
	Indirect CPU to Screen color expansion
	Screen to Screen color expansion
	Solid Lines
	Dashed Lines
	Scanline Image Writes
	Setting up tile and stipple cache:
		15 128x48 slots
(==) MGA(0): Backing store disabled
(==) MGA(0): Silken mouse enabled
(**) MGA(0): DPMS enabled
(II) MGA(0): Using overlay video
(II) MGA(0): [DRI] installation complete
(II) MGA(0): [drm] Mapped 128 DMA buffers
(II) MGA(0): [drm] dma control initialized, using IRQ 11
(II) MGA(0): Direct rendering enabled
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: Loaded and initialized /usr/lib/dri/mga_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
(II) config/udev: Adding input device Power Button (/dev/input/event1)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 2.3.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 7.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "it"
(II) XKB: reuse xkmfile /var/lib/xkb/server-35DF0DEC488035CD7337E5EF69F018BFAFADCAC5.xkm
(II) config/udev: Adding input device Power Button (/dev/input/event0)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event0"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "it"
(II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "it"
(II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event4)
(**) ImPS/2 Generic Wheel Mouse: Applying InputClass "evdev pointer catchall"
(**) ImPS/2 Generic Wheel Mouse: always reports core events
(**) ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event4"
(II) ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
(II) ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)
(II) ImPS/2 Generic Wheel Mouse: Found relative axes
(II) ImPS/2 Generic Wheel Mouse: Found x and y relative axes
(II) ImPS/2 Generic Wheel Mouse: Configuring as mouse
(**) ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
(**) ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE)
(II) ImPS/2 Generic Wheel Mouse: initialized for relative axes.
(II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/event2)
(**) Macintosh mouse button emulation: Applying InputClass "evdev pointer catchall"
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event2"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
Ritorna su
Avatar utente
cristian_c
Accecante Asceta
Accecante Asceta
Messaggi: 23422
Iscrizione: lunedì 29 ottobre 2007, 11:31

Re: Installazione driver (e relativa configurazione ottimale) per Matrox G450

Messaggio da cristian_c »

Nulla di anomalo in Xorg.0.log  :-\ Posta l'output del comando:

Codice: Seleziona tutto

lsmod
Ultima modifica di cristian_c il mercoledì 23 novembre 2011, 23:33, modificato 1 volta in totale.
UP! Unreal Project: il futuro inizia qui. Crusade è tra noi
È scienza!
Ritorna su
Avatar utente
simpaticoteppei
Prode Principiante
Messaggi: 184
Iscrizione: venerdì 1 ottobre 2010, 10:39
Distribuzione: Linux Mint 18 64 Bit
Sesso: Maschile
Località: BARI

Re: Installazione driver (e relativa configurazione ottimale) per Matrox G450

Messaggio da simpaticoteppei »

cristian_c ha scritto: Nulla di anomalo in Xorg.0.log  :-\ Posta l'output del comando:

Codice: Seleziona tutto

lsmod

Codice: Seleziona tutto

 lsmod
Module                  Size  Used by
mga                    28320  2 
drm                   163651  3 mga
binfmt_misc             6587  1 
rfcomm                 33453  6 
sco                     7949  2 
bridge                 45614  0 
stp                     1655  1 bridge
bnep                    9436  2 
l2cap                  30656  16 rfcomm,bnep
snd_ens1371            18910  3 
gameport                9089  1 snd_ens1371
snd_ac97_codec        100646  1 snd_ens1371
ac97_bus                1002  1 snd_ac97_codec
snd_pcm_oss            35308  0 
snd_mixer_oss          13746  1 snd_pcm_oss
snd_pcm                70694  4 snd_ens1371,snd_ac97_codec,snd_pcm_oss
snd_seq_dummy           1338  0 
snd_seq_oss            26722  0 
snd_seq_midi            4557  0 
snd_rawmidi            19056  2 snd_ens1371,snd_seq_midi
snd_seq_midi_event      6003  2 snd_seq_oss,snd_seq_midi
snd_seq                47263  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer              19130  2 snd_pcm,snd_seq
snd_seq_device          5700  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd                    54244  15 snd_ens1371,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
matrox_w1               2253  0 
btusb                  11053  2 
ppdev                   5259  0 
usblp                  10481  0 
wire                   22553  1 matrox_w1
bluetooth              49892  9 rfcomm,sco,bnep,l2cap,btusb
soundcore               6620  1 snd
psmouse                63677  0 
vga16fb                11385  0 
serio_raw               3978  0 
snd_page_alloc          7076  1 snd_pcm
i2c_viapro              5573  0 
vgastate                8961  1 vga16fb
parport_pc             25962  1 
shpchp                 28835  0 
lp                      7028  0 
parport                32635  3 ppdev,parport_pc,lp
fbcon                  35102  71 
tileblit                1999  1 fbcon
font                    7557  1 fbcon
bitblit                 4707  1 fbcon
softcursor              1189  1 bitblit
uvesafb                22297  1 
8139too                18545  0 
via_agp                 5310  1 
usb_storage            39905  0 
floppy                 53016  0 
mii                     4381  1 8139too
dc395x                 32255  0 
pata_via                7272  3 
agpgart                31724  2 drm,via_agp
Ritorna su
Avatar utente
cristian_c
Accecante Asceta
Accecante Asceta
Messaggi: 23422
Iscrizione: lunedì 29 ottobre 2007, 11:31

Re: Installazione driver (e relativa configurazione ottimale) per Matrox G450

Messaggio da cristian_c »

dai un'occhiata a queste discussioni per vedere se possono essere utili:
http://forum.tuxx-home.at/viewtopic.php?f=1&t=376
http://forum.tuxx-home.at/viewtopic.php?f=5&t=91
UP! Unreal Project: il futuro inizia qui. Crusade è tra noi
È scienza!
Ritorna su
Avatar utente
simpaticoteppei
Prode Principiante
Messaggi: 184
Iscrizione: venerdì 1 ottobre 2010, 10:39
Distribuzione: Linux Mint 18 64 Bit
Sesso: Maschile
Località: BARI

Re: Installazione driver (e relativa configurazione ottimale) per Matrox G450

Messaggio da simpaticoteppei »

cristian_c ha scritto: dai un'occhiata a queste discussioni per vedere se possono essere utili:
http://forum.tuxx-home.at/viewtopic.php?f=1&t=376
http://forum.tuxx-home.at/viewtopic.php?f=5&t=91
ti ringrazio, gli darò una lettura.
Ritorna su
Avatar utente
simpaticoteppei
Prode Principiante
Messaggi: 184
Iscrizione: venerdì 1 ottobre 2010, 10:39
Distribuzione: Linux Mint 18 64 Bit
Sesso: Maschile
Località: BARI

Re: Installazione driver (e relativa configurazione ottimale) per Matrox G450

Messaggio da simpaticoteppei »

cristian_c posso chiederti un' informazione?  ???
Ritorna su
Avatar utente
cristian_c
Accecante Asceta
Accecante Asceta
Messaggi: 23422
Iscrizione: lunedì 29 ottobre 2007, 11:31

Re: Installazione driver (e relativa configurazione ottimale) per Matrox G450

Messaggio da cristian_c »

simpaticoteppei ha scritto: cristian_c posso chiederti un' informazione?  ???
LOL, non è una chat, potevi scriverlo nel post (rotfl)
UP! Unreal Project: il futuro inizia qui. Crusade è tra noi
È scienza!
Ritorna su
Avatar utente
simpaticoteppei
Prode Principiante
Messaggi: 184
Iscrizione: venerdì 1 ottobre 2010, 10:39
Distribuzione: Linux Mint 18 64 Bit
Sesso: Maschile
Località: BARI

Re: Installazione driver (e relativa configurazione ottimale) per Matrox G450

Messaggio da simpaticoteppei »

Se non erro, i driver che ho scaricato dal Wiki della matrox G450 non sono installati.....l'abbiamo scoperto dai comandi che mi ha consigliato di riportare, detto questo, la cartella è presente sulla mia scrivania, come faccio eventualmente ad installarli? se non erro c'è un file install.sh....
Ritorna su
Scrivi risposta

Ritorna a “Driver e periferiche”

Chi c’è in linea

Visualizzano questa sezione: Google [Bot] e 18 ospiti