[Risolto] huawei e352 non riconosciuta da NM

[Pastenaca]

Ciao ragazzi lo so che ci sono un bel po di discussioni su questa chiavetta
in particolare ci sono anche le istruzioni a questo indirizzo

http://www.lffl.org/2011/02/ubuntu-coll ... t-con.html

ma non mi viene riconosciuta cmq dal network manager

lsusb

Codice: Seleziona tutto

massi@massi-laptop:~$ lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 005: ID 12d1:14fe Huawei Technologies Co., Ltd.
Bus 001 Device 004: ID 0c45:62c0 Microdia Sonix USB 2.0 Camera
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
massi@massi-laptop:~$


la chiavetta viene riconosciuta con il codice 14fe invece che 1444 o 1449
quindi la guida del link non va
ho provato a imbrogliare cambiando qualche parametro della guida ma niente
ho provato anche con lo script Sakis3g.... idem con patate

avete suggerimenti??

sto usando ubuntu 10.04 su un netbook Acer One

inutile dire che su win la chiavetta funziona perfettamente...

grazie

[Pastenaca]

Sto diventando stupido 
è tutto il pomeriggio che leggo il forum per non aprire un post inutile

adesso ho provato a seguire questa discussione con la chiavetta scollegata

http://forum.ubuntu-it.org/viewtopic.php?t=437987

è molto simile alla guida di prima....bene tutto va avanti....
e quando vado a collegare la chiavetta faccio  lsusb
e invece di 12d1:14fe che usciva prima, adesso mi risulta 12d1:1c05     

si è cambiato il codice del prodotto??
che è successo??? qualcuno ha cambiato la chiavetta e non me ne sono accorto??
invece di una internet key ho comprato un Transformers???

se qualche anima buona ha una risposta mi fa un gran piacere

adesso vado a letto che mi sono cotto...

[gnomo56]

Segui questa guida al punto 2 - Il secondo suggerimento
http://www.istitutomajorana.it/index.php?option=com_content&task=view&id=1229&Itemid=33

[Pastenaca]

Grazie per aver risposto gnomo ma avevo già visto la guida di majorana...

l' usb-modeswitch tra l'altro ce l'avevo già installato perchè prima usavo una chiavetta della 3, sempre huawei, quindi la procedura l'avevo già fatta
questa invece è una chiavetta universale e la luce blu lampeggia, quindi è attiva, ma non riesco a fare la modifica delle connessioni perchè network manager non la vede...

[cristian_c]

Cosa appare nel desktop quando colleghi il modem usb?

[Pastenaca]

non appare niente fino a quando non vado in risorse, lì la trovo come unità cd smontata, ci clicco sopra e me la monta sul desktop.
dentro ci trovo i vari driver per win e mac
leggendo i vari forum da quello che ho capito NM per poterla vedere c'è bisogno di cambiare il codice del prodotto da 1449 a 1444
e tutti hanno risolto così e anche disattivando il PIN della sim
a me già in partenza il cod. prod. è diverso (14fe)
dando il comando

Codice: Seleziona tutto

sudo modprobe usbserial vendor=0x12d1 product=0x1444


in teoria avrei dovuto risolvere, invece mi cambia il cod.prod. in 1c05

hai qualche suggerimento?

[cristian_c]

non appare niente fino a quando non vado in risorse, lì la trovo come unità cd smontata, ci clicco sopra e me la monta sul desktop.
dentro ci trovo i vari driver per win e mac
leggendo i vari forum da quello che ho capito NM per poterla vedere c'è bisogno di cambiare il codice del prodotto da 1449 a 1444
e tutti hanno risolto così e anche disattivando il PIN della sim
a me già in partenza il cod. prod. è diverso (14fe)
dando il comando

Codice: Seleziona tutto

sudo modprobe usbserial vendor=0x12d1 product=0x1444


in teoria avrei dovuto risolvere, invece mi cambia il cod.prod. in 1c05

hai qualche suggerimento?

Hai sempre montato il cd virtuale nei tuoi tentativi di far funzionare il modem?

[Pastenaca]

ho provato sia montato che no

[cristian_c]

Ripristina la situazione di partenza e segui questo topic: http://forum.ubuntuusers.de/topic/umts- ... t-erkannt/

[Pastenaca]

tedesken?? ya....   

adesso me lo leggo, poi stasera provo che sono a lavoro adesso

farotti sapere

grazie intanto

[Pastenaca]

Allora...
secondo questo schema dei dispositivi supportati

http://wiki.ubuntuusers.de/USB_ModeSwit ... te-Geraete

il codice 14fe si deve cambiare in 1506 per passare da unità cd a modem e fin qui....

poi seguendo le istruzioni:

http://forum.ubuntuusers.de/topic/umts- ... t-erkannt/

effettivamente il codice cambia ma ad ogni riavvio torna al codice come unità cd

a meno che non memorizzi lo script e il codice cambia in automatico... e sempre fin qui ci siamo perchè fa tutto.

solo che NM proprio non ne vuole sapere di vederlo il modem 

ho provato ad avviare con la chiavetta inserita e non,
ho provato con la chiavetta montata e non,

e per finire: se riavvio il netbook con la chiavetta inserita si blocca il portatile (se spengo e basta non succede niente di strano)

la cosa che mi sembra strana è che prima usavo una huawei e169 della 3 e tutto sto casino di PIN, di codici e bla bla bla non c'era.... una volta installato l'usb_modeswitch  partiva senza problemi... 

altri suggerimenti?

[daigo]

qui trovi la versione di sakis 3g, (se puoi connetterti ad internet in un altro modo) per la tua architettura, 32 o 64 bit

32 bit http://www.sakis3g.org/versions/latest/i386/sakis3g.gz
64 bit http://www.sakis3g.org/versions/latest/amd64/sakis3g.gz

scarica il file e copialo nella cartella home
Ora sul terminale dai il comando sotto e invio

Codice: Seleziona tutto

gunzip sakis3g.gz
chmod +x sakis3g
./sakis3g --interactive

Ora con sakis aperto e chiavetta inserita, si tratta solo di premere su Connect with 3G e scegliere sempre l'opzione più in alto, nel giro di 2-3 clic dovresti essere connesso.Per disconnettersi riapri sakis3g e premi su disconneti. nella finestra di sakis con more option cè la voce create shorcut on desktop che crea l'icona sul desktop o nella cartella home per avviare ogni volta sakis senza i comandi da terminale

[cristian_c]

il codice 14fe si deve cambiare in 1506 per passare da unità cd a modem e fin qui....

in genere è proprio smontando il cd virtuale che cambia la modalità

solo che NM proprio non ne vuole sapere di vederlo il modem 

ho provato ad avviare con la chiavetta inserita e non,
ho provato con la chiavetta montata e non,

quali operazioni hai eseguito in dettaglio per connetterti con il network manager? Puoi realizzare qualche screen?

e per finire: se riavvio il netbook con la chiavetta inserita si blocca il portatile (se spengo e basta non succede niente di strano)

questo sembra un bug, anche se non posso metterci la mano sul fuoco. Puoi descrivere meglio la situazione?
Inoltre potrebbe essere utile vedere un po' quello che succede a livello di kernel. Digita:

Codice: Seleziona tutto

dmesg

Nulla toglie che sarebbe una buona idea seguire prima i suggerimenti di daigo

[Pastenaca]

Scusate ragazzi ma stavo facendo varie prove..

Intanto un grazie a daigo perchè con Sakis3g funziona perfettamente e in più ho visto che mette in automatico come opzione network il codice 22299 che serve alla sim della 3 a non andare in roaming...   (good)

poi non so cosa è successo dopo che ho fatto partire Sakis

adesso anche network manager riconosce la chiavetta come modem

cosa è successo non lo so

ora metto in ogni caso RISOLTO ma il perchè.... boh??

@cristian c

al comando dmesg

Codice: Seleziona tutto

[    0.517598] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[    0.517612] pci 0000:00:1c.0:   IO window: 0x4000-0x4fff
[    0.517625] pci 0000:00:1c.0:   MEM window: 0x95100000-0x961fffff
[    0.517638] pci 0000:00:1c.0:   PREFETCH window: 0x00000090000000-0x00000090ffffff
[    0.517654] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
[    0.517663] pci 0000:00:1c.1:   IO window: 0x3000-0x3fff
[    0.517676] pci 0000:00:1c.1:   MEM window: 0x94100000-0x950fffff
[    0.517687] pci 0000:00:1c.1:   PREFETCH window: 0x00000091000000-0x00000091ffffff
[    0.517703] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03
[    0.517713] pci 0000:00:1c.2:   IO window: 0x1000-0x2fff
[    0.517725] pci 0000:00:1c.2:   MEM window: 0x93000000-0x940fffff
[    0.517737] pci 0000:00:1c.2:   PREFETCH window: 0x00000092000000-0x00000092ffffff
[    0.517752] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[    0.517759] pci 0000:00:1e.0:   IO window: disabled
[    0.517770] pci 0000:00:1e.0:   MEM window: disabled
[    0.517780] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.517819]   alloc irq_desc for 16 on node -1
[    0.517826]   alloc kstat_irqs on node -1
[    0.517844] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.517857] pci 0000:00:1c.0: setting latency timer to 64
[    0.517877] pci 0000:00:1c.1: enabling device (0000 -> 0003)
[    0.517887]   alloc irq_desc for 17 on node -1
[    0.517893]   alloc kstat_irqs on node -1
[    0.517905] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.517919] pci 0000:00:1c.1: setting latency timer to 64
[    0.517938]   alloc irq_desc for 18 on node -1
[    0.517944]   alloc kstat_irqs on node -1
[    0.517956] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.517967] pci 0000:00:1c.2: setting latency timer to 64
[    0.517984] pci 0000:00:1e.0: setting latency timer to 64
[    0.517996] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.518005] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.518014] pci_bus 0000:01: resource 0 io:  [0x4000-0x4fff]
[    0.518023] pci_bus 0000:01: resource 1 mem: [0x95100000-0x961fffff]
[    0.518031] pci_bus 0000:01: resource 2 pref mem [0x90000000-0x90ffffff]
[    0.518040] pci_bus 0000:02: resource 0 io:  [0x3000-0x3fff]
[    0.518049] pci_bus 0000:02: resource 1 mem: [0x94100000-0x950fffff]
[    0.518057] pci_bus 0000:02: resource 2 pref mem [0x91000000-0x91ffffff]
[    0.518066] pci_bus 0000:03: resource 0 io:  [0x1000-0x2fff]
[    0.518075] pci_bus 0000:03: resource 1 mem: [0x93000000-0x940fffff]
[    0.518084] pci_bus 0000:03: resource 2 pref mem [0x92000000-0x92ffffff]
[    0.518093] pci_bus 0000:04: resource 3 io:  [0x00-0xffff]
[    0.518101] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff]
[    0.518201] NET: Registered protocol family 2
[    0.518494] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.519517] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.520680] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.521259] TCP: Hash tables configured (established 131072 bind 65536)
[    0.521269] TCP reno registered
[    0.521553] NET: Registered protocol family 1
[    0.521627] pci 0000:00:02.0: Boot video device
[    0.521960] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[    0.521968] Simple Boot Flag at 0x44 set to 0x1
[    0.522473] cpufreq-nforce2: No nForce2 chipset.
[    0.522564] Scanning for low memory corruption every 60 seconds
[    0.522943] audit: initializing netlink socket (disabled)
[    0.522970] type=2000 audit(1324499977.522:1): initialized
[    0.544623] highmem bounce pool size: 64 pages
[    0.544639] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.549896] VFS: Disk quotas dquot_6.5.2
[    0.550103] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.552186] fuse init (API version 7.13)
[    0.552475] msgmni has been set to 1690
[    0.553172] alg: No test for stdrng (krng)
[    0.553380] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.553391] io scheduler noop registered
[    0.553397] io scheduler anticipatory registered
[    0.553403] io scheduler deadline registered
[    0.553540] io scheduler cfq registered (default)
[    0.553897]   alloc irq_desc for 24 on node -1
[    0.553905]   alloc kstat_irqs on node -1
[    0.553928] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[    0.553949] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.554225]   alloc irq_desc for 25 on node -1
[    0.554232]   alloc kstat_irqs on node -1
[    0.554252] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[    0.554272] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.554564]   alloc irq_desc for 26 on node -1
[    0.554572]   alloc kstat_irqs on node -1
[    0.554590] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
[    0.554608] pcieport 0000:00:1c.2: setting latency timer to 64
[    0.554883] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.555207] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[    0.555231] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7016a38), AE_ALREADY_EXISTS
[    0.555605] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[    0.555624] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7016a38), AE_ALREADY_EXISTS
[    0.555970] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[    0.555990] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7016a38), AE_ALREADY_EXISTS
[    0.556418] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[    0.556438] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7016a38), AE_ALREADY_EXISTS
[    0.556785] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[    0.556804] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7016a38), AE_ALREADY_EXISTS
[    0.557163] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[    0.557185] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7016a38), AE_ALREADY_EXISTS
[    0.557327] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.599011] Freeing initrd memory: 7813k freed
[    0.618931] ACPI: AC Adapter [AC] (on-line)
[    0.619160] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.619169] ACPI: Power Button [PWRB]
[    0.619267] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    0.619365] ACPI: Lid Switch [LID0]
[    0.619471] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    0.619478] ACPI: Sleep Button [SLPB]
[    0.619605] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.619612] ACPI: Power Button [PWRF]
[    0.619916] fan PNP0C0B:00: registered as cooling_device0
[    0.619930] ACPI: Fan [FAN] (on)
[    0.621317] ACPI: SSDT 7f592c90 00239 (v02  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.622136] ACPI: SSDT 7f591e10 001C7 (v02  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.623797] Marking TSC unstable due to TSC halts in idle
[    0.623953] Switching to clocksource hpet
[    0.623972] processor LNXCPU:00: registered as cooling_device1
[    0.624873] ACPI: SSDT 7f592f10 000D0 (v02  PmRef  Cpu1Ist 00003000 INTL 20051117)
[    0.625609] ACPI: SSDT 7f590f10 00083 (v02  PmRef  Cpu1Cst 00003000 INTL 20051117)
[    0.627433] processor LNXCPU:01: registered as cooling_device2
[    0.695463] thermal LNXTHERM:01: registered as thermal_zone0
[    0.695481] ACPI: Thermal Zone [THRM] (27 C)
[    0.695834] isapnp: Scanning for PnP cards...
[    0.700449] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.704199] brd: module loaded
[    0.705623] loop: module loaded
[    0.705882] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[    0.706140] ata_piix 0000:00:1f.1: version 2.13
[    0.706171] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.706253] ata_piix 0000:00:1f.1: setting latency timer to 64
[    0.706456] scsi0 : ata_piix
[    0.706692] scsi1 : ata_piix
[    0.708089] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x50c0 irq 14
[    0.708099] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x50c8 irq 15
[    0.709189] Fixed MDIO Bus: probed
[    0.709305] PPP generic driver version 2.4.2
[    0.709444] tun: Universal TUN/TAP device driver, 1.6
[    0.709451] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.709689] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.709739] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.709774] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.709783] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.709889] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.709943] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    0.709963] ehci_hcd 0000:00:1d.7: debug port 1
[    0.713843] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.713891] ehci_hcd 0000:00:1d.7: irq 16, io mem 0x96344400
[    0.718133] ata2: port disabled. ignoring.
[    0.728034] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.728322] usb usb1: configuration #1 chosen from 1 choice
[    0.728409] hub 1-0:1.0: USB hub found
[    0.728433] hub 1-0:1.0: 8 ports detected
[    0.728608] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.728654] uhci_hcd: USB Universal Host Controller Interface driver
[    0.728733] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.728752] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.728761] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.728866] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.728915] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000050a0
[    0.729164] usb usb2: configuration #1 chosen from 1 choice
[    0.729242] hub 2-0:1.0: USB hub found
[    0.729262] hub 2-0:1.0: 2 ports detected
[    0.729378] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.729395] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.729403] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.729503] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.729564] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00005080
[    0.729803] usb usb3: configuration #1 chosen from 1 choice
[    0.729881] hub 3-0:1.0: USB hub found
[    0.729900] hub 3-0:1.0: 2 ports detected
[    0.730014] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.730029] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.730037] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.730125] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.730181] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005060
[    0.730434] usb usb4: configuration #1 chosen from 1 choice
[    0.730512] hub 4-0:1.0: USB hub found
[    0.730531] hub 4-0:1.0: 2 ports detected
[    0.730646]   alloc irq_desc for 19 on node -1
[    0.730653]   alloc kstat_irqs on node -1
[    0.730668] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.730682] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.730690] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.730781] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.730838] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00005040
[    0.731086] usb usb5: configuration #1 chosen from 1 choice
[    0.731165] hub 5-0:1.0: USB hub found
[    0.731184] hub 5-0:1.0: 2 ports detected
[    0.731437] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[    0.758607] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.758625] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.759288] mice: PS/2 mouse device common for all mice
[    0.760542] rtc_cmos 00:03: RTC can wake from S4
[    0.760659] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.760708] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.761279] device-mapper: uevent: version 1.0.3
[    0.761603] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    0.761825] device-mapper: multipath: version 1.1.0 loaded
[    0.761834] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.762187] EISA: Probing bus 0 at eisa.0
[    0.762202] Cannot allocate resource for EISA slot 1
[    0.762209] Cannot allocate resource for EISA slot 2
[    0.762215] Cannot allocate resource for EISA slot 3
[    0.762221] Cannot allocate resource for EISA slot 4
[    0.762228] Cannot allocate resource for EISA slot 5
[    0.762252] EISA: Detected 0 cards.
[    0.762638] cpuidle: using governor ladder
[    0.762897] cpuidle: using governor menu
[    0.764131] TCP cubic registered
[    0.764633] NET: Registered protocol family 10
[    0.766922] NET: Registered protocol family 17
[    0.769139] Using IPI No-Shortcut mode
[    0.769397] PM: Resume from disk failed.
[    0.769439] registered taskstats version 1
[    0.770167]   Magic number: 7:869:700
[    0.770312] rtc_cmos 00:03: setting system clock to 2011-12-21 20:39:38 UTC (1324499978)
[    0.770322] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.770327] EDD information not available.
[    0.782844] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[    1.048053] usb 1-2: new high speed USB device using ehci_hcd and address 2
[    1.050892] isapnp: No Plug & Play device found
[    1.051013] Freeing unused kernel memory: 668k freed
[    1.051628] Write protecting the kernel text: 4684k
[    1.051708] Write protecting the kernel read-only data: 1844k
[    1.090986] udev: starting version 151
[    1.213987] usb 1-2: configuration #1 chosen from 1 choice
[    1.332418] ACPI: Battery Slot [BAT0] (battery present)
[    2.203894] ahci 0000:00:1f.2: version 3.0
[    2.203935] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    2.204020]   alloc irq_desc for 27 on node -1
[    2.204028]   alloc kstat_irqs on node -1
[    2.204050] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
[    2.204131] ahci: SSS flag set, parallel bus scan disabled
[    2.204195] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
[    2.204208] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part
[    2.204221] ahci 0000:00:1f.2: setting latency timer to 64
[    2.204706] scsi2 : ahci
[    2.204955] scsi3 : ahci
[    2.205225] scsi4 : ahci
[    2.205451] scsi5 : ahci
[    2.206206] ata3: SATA max UDMA/133 abar m1024@0x96344000 port 0x96344100 irq 27
[    2.206215] ata4: DUMMY
[    2.206224] ata5: SATA max UDMA/133 abar m1024@0x96344000 port 0x96344200 irq 27
[    2.206232] ata6: DUMMY
[    2.524117] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.525562] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    2.526018] ata3.00: ATA-8: Hitachi HTS543216L9SA00, FB2OC40C, max UDMA/133
[    2.526033] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.527891] ata3.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    2.528421] ata3.00: configured for UDMA/133
[    2.544502] scsi 2:0:0:0: Direct-Access     ATA      Hitachi HTS54321 FB2O PQ: 0 ANSI: 5
[    2.544981] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    2.545344] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    2.545483] sd 2:0:0:0: [sda] Write Protect is off
[    2.545490] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.545560] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.545925]  sda: sda1 sda2 sda3 < sda5 sda6 >
[    2.608560] sd 2:0:0:0: [sda] Attached SCSI disk
[    2.864111] ata5: SATA link down (SStatus 0 SControl 300)
[    3.601247] EXT4-fs (sda5): mounted filesystem with ordered data mode
[   13.549960] Adding 4152760k swap on /dev/sda6.  Priority:-1 extents:1 across:4152760k
[   13.724715] udev: starting version 151
[   13.766364] lp: driver loaded but no devices found
[   13.874519] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[   13.876792] acpi device:18: registered as cooling_device3
[   13.878350] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[   13.878766] ACPI: Video Device [OVGA] (multi-head: yes  rom: yes  post: no)
[   14.591689] Linux agpgart interface v0.103
[   14.608105] atl1c 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   14.608133] atl1c 0000:03:00.0: setting latency timer to 64
[   14.651175] intel_rng: FWH not detected
[   14.682533] Linux video capture interface: v2.00
[   14.698378] atl1c 0000:03:00.0: version 1.0.0.1-NAPI
[   14.737275] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[   14.737604] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[   14.740665] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
[   14.740904] acer-wmi: Acer Laptop ACPI-WMI Extras
[   14.810775] type=1505 audit(1324496392.537:2):  operation="profile_load" pid=574 name="/sbin/dhclient3"
[   14.811618] type=1505 audit(1324496392.537:3):  operation="profile_load" pid=574 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   14.819509] type=1505 audit(1324496392.545:4):  operation="profile_load" pid=574 name="/usr/lib/connman/scripts/dhclient-script"
[   14.932199] acer-wmi: Unable to detect available WMID devices
[   14.939381] cfg80211: Calling CRDA to update world regulatory domain
[   14.993627] cfg80211: World regulatory domain updated:
[   14.993638]    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   14.993649]    (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.993659]    (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   14.993668]    (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   14.993677]    (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.993686]    (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   15.049414] [drm] Initialized drm 1.1.0 20060810
[   15.137784]   alloc irq_desc for 28 on node -1
[   15.137794]   alloc kstat_irqs on node -1
[   15.137824] atl1c 0000:03:00.0: irq 28 for MSI/MSI-X
[   15.141646] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   15.172318] uvcvideo: Found UVC 1.00 device WebCam (0c45:62c0)
[   15.192263] input: WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/input/input7
[   15.192474] usbcore: registered new interface driver uvcvideo
[   15.192486] USB Video Class driver (v0.1.0)
[   15.313019] ath5k 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   15.313045] ath5k 0000:01:00.0: setting latency timer to 64
[   15.313127] ath5k 0000:01:00.0: registered as 'phy0'
[   15.468236] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   15.468250] i915 0000:00:02.0: setting latency timer to 64
[   15.520720] [drm] set up 7M of stolen space
[   15.716666] [drm] initialized overlay support
[   15.951229] ath: EEPROM regdomain: 0x65
[   15.951237] ath: EEPROM indicates we should expect a direct regpair map
[   15.951247] ath: Country alpha2 being used: 00
[   15.951252] ath: Regpair used: 0x65
[   15.987760] type=1505 audit(1324496393.713:5):  operation="profile_replace" pid=703 name="/sbin/dhclient3"
[   15.989830] type=1505 audit(1324496393.717:6):  operation="profile_load" pid=702 name="/usr/share/gdm/guest-session/Xsession"
[   15.996296] type=1505 audit(1324496393.725:7):  operation="profile_replace" pid=703 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   15.996818] type=1505 audit(1324496393.725:8):  operation="profile_replace" pid=703 name="/usr/lib/connman/scripts/dhclient-script"
[   16.018607] type=1505 audit(1324496393.745:9):  operation="profile_load" pid=707 name="/usr/bin/evince"
[   16.031165] type=1505 audit(1324496393.757:10):  operation="profile_load" pid=707 name="/usr/bin/evince-previewer"
[   16.034358] type=1505 audit(1324496393.761:11):  operation="profile_load" pid=714 name="/usr/lib/cups/backend/cups-pdf"
[   16.063983] phy0: Selected rate control algorithm 'minstrel'
[   16.066269] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[   16.235528] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   16.241774] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04771/0xa40000/0xa0000
[   16.329401] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[   16.352046] fb0: inteldrmfb frame buffer device
[   16.352055] registered panic notifier
[   16.352075] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   16.352185] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   16.352267] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   16.370541] vga16fb: initializing
[   16.370555] vga16fb: mapped to 0xc00a0000
[   16.370567] vga16fb: not registering due to another framebuffer present
[   16.482020] Console: switching to colour frame buffer device 128x37
[   16.579850] hda_codec: ALC272: BIOS auto-probing.
[   16.581533] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[   16.731803] ppdev: user-space parallel port driver
[   17.442916] CPU0 attaching NULL sched-domain.
[   17.442931] CPU1 attaching NULL sched-domain.
[   17.486407] CPU0 attaching sched-domain:
[   17.486417]  domain 0: span 0-1 level SIBLING
[   17.486426]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[   17.486445]   domain 1: span 0-1 level MC
[   17.486452]    groups: 0-1 (cpu_power = 1178)
[   17.486468] CPU1 attaching sched-domain:
[   17.486475]  domain 0: span 0-1 level SIBLING
[   17.486483]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[   17.486500]   domain 1: span 0-1 level MC
[   17.486507]    groups: 0-1 (cpu_power = 1178)
[   22.510775] CPU0 attaching NULL sched-domain.
[   22.510792] CPU1 attaching NULL sched-domain.
[   22.541168] CPU0 attaching sched-domain:
[   22.541179]  domain 0: span 0-1 level SIBLING
[   22.541188]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[   22.541205]   domain 1: span 0-1 level MC
[   22.541213]    groups: 0-1 (cpu_power = 1178)
[   22.541229] CPU1 attaching sched-domain:
[   22.541236]  domain 0: span 0-1 level SIBLING
[   22.541243]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[   22.541259]   domain 1: span 0-1 level MC
[   22.541267]    groups: 0-1 (cpu_power = 1178)
[   70.196128] usb 1-1: new high speed USB device using ehci_hcd and address 3
[   70.329589] usb 1-1: configuration #1 chosen from 1 choice
[   70.574661] usb 1-1: usbfs: process 1309 (usb_modeswitch) did not claim interface 0 before use
[   70.575792] usb 1-1: USB disconnect, address 3
[   70.634684] Initializing USB Mass Storage driver...
[   70.634856] usbcore: registered new interface driver usb-storage
[   70.634866] USB Mass Storage support registered.
[   81.709086] usb 1-1: new high speed USB device using ehci_hcd and address 4
[   81.842862] usb 1-1: configuration #1 chosen from 1 choice
[   81.846563] scsi6 : SCSI emulation for USB Mass Storage devices
[   81.847197] usb-storage: device found at 4
[   81.847211] usb-storage: waiting for device to settle before scanning
[   81.847918] scsi7 : SCSI emulation for USB Mass Storage devices
[   81.850341] usb-storage: device found at 4
[   81.850355] usb-storage: waiting for device to settle before scanning
[   81.929512] usbcore: registered new interface driver usbserial
[   81.929612] USB Serial support registered for generic
[   81.929849] usbcore: registered new interface driver usbserial_generic
[   81.929863] usbserial: USB Serial Driver core
[   82.029147] option: Unknown parameter `&&'
[   82.068074] option: Unknown parameter `&&'
[   82.088431] option: Unknown parameter `&&'
[   82.107919] option: Unknown parameter `&&'
[   82.135646] option: Unknown parameter `&&'
[   82.154754] option: Unknown parameter `&&'
[   82.183566] option: Unknown parameter `&&'
[   86.844464] usb-storage: device scan complete
[   86.845687] scsi 6:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
[   86.845804] scsi: killing requests for dead queue
[   86.845910] scsi: killing requests for dead queue
[   86.846017] scsi: killing requests for dead queue
[   86.846117] scsi: killing requests for dead queue
[   86.846215] scsi: killing requests for dead queue
[   86.846316] scsi: killing requests for dead queue
[   86.846415] scsi: killing requests for dead queue
[   86.846519] scsi: killing requests for dead queue
[   86.853592] usb-storage: device scan complete
[   86.854543] scsi 7:0:0:0: Direct-Access     HUAWEI   SD Storage       2.31 PQ: 0 ANSI: 2
[   86.854644] scsi: killing requests for dead queue
[   86.854749] scsi: killing requests for dead queue
[   86.854887] scsi: killing requests for dead queue
[   86.855098] scsi: killing requests for dead queue
[   86.855208] scsi: killing requests for dead queue
[   86.855311] scsi: killing requests for dead queue
[   86.855478] scsi: killing requests for dead queue
[   86.855580] scsi: killing requests for dead queue
[   86.859510] sr0: scsi-1 drive
[   86.859519] Uniform CD-ROM driver Revision: 3.20
[   86.862786] sr 6:0:0:0: Attached scsi CD-ROM sr0
[   86.869592] sr 6:0:0:0: Attached scsi generic sg1 type 5
[   86.878524] sd 7:0:0:0: Attached scsi generic sg2 type 0
[   86.882188] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[  136.027293] ISO 9660 Extensions: Microsoft Joliet Level 1
[  136.043014] ISOFS: changing to secondary root
[  336.072205] wlan0: direct probe to AP c4:3d:c7:55:3b:30 (try 1)
[  336.072355] wlan0: deauthenticating from c4:3d:c7:55:3b:30 by local choice (reason=3)
[  336.072497] wlan0: direct probe to AP c4:3d:c7:55:3b:30 (try 1)
[  336.076169] wlan0: direct probe responded
[  336.076192] wlan0: authenticate with AP c4:3d:c7:55:3b:30 (try 1)
[  336.083041] wlan0: authenticated
[  336.083143] wlan0: associate with AP c4:3d:c7:55:3b:30 (try 1)
[  336.086029] wlan0: RX AssocResp from c4:3d:c7:55:3b:30 (capab=0x411 status=0 aid=1)
[  336.086050] wlan0: associated
[  336.089495] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  336.186786] padlock: VIA PadLock not detected.
[  346.656085] wlan0: no IPv6 routers present
[ 3246.244170] wlan0: deauthenticating from c4:3d:c7:55:3b:30 by local choice (reason=3)
[ 3290.309963] USB Serial support registered for GSM modem (1-port)
[ 3290.310944] usbcore: registered new interface driver option
[ 3290.310954] option: v0.7.2:USB Driver for GSM modems
[ 3290.482485] option 1-1:1.0: GSM modem (1-port) converter detected
[ 3290.482777] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
[ 3290.482904] option 1-1:1.1: GSM modem (1-port) converter detected
[ 3290.485761] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
[ 3290.485914] option 1-1:1.2: GSM modem (1-port) converter detected
[ 3290.486915] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB2
[ 3290.487057] option 1-1:1.3: GSM modem (1-port) converter detected
[ 3290.488409] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB3
[ 3313.029941] PPP BSD Compression module registered
[ 3313.068949] PPP Deflate Compression module registered
[ 3643.861813] wlan0: deauthenticating from c4:3d:c7:55:3b:30 by local choice (reason=3)
[ 3644.093353] wlan0: direct probe to AP c4:3d:c7:55:3b:30 (try 1)
[ 3644.097294] wlan0: direct probe responded
[ 3644.097310] wlan0: authenticate with AP c4:3d:c7:55:3b:30 (try 1)
[ 3644.099011] wlan0: authenticated
[ 3644.099076] wlan0: associate with AP c4:3d:c7:55:3b:30 (try 1)
[ 3644.101451] wlan0: RX AssocResp from c4:3d:c7:55:3b:30 (capab=0x411 status=0 aid=1)
[ 3644.101470] wlan0: associated
massi@massi-laptop:~$


grazie mille ragazzi  (b2b)


EDIT
sembra proprio così: ho provato a riavviare e NM riconosce il modem solo dopo che Sakis lo ha attivato!!!

[cristian_c]

Boh, non saprei quale fosse il problema, ho ancora poca esperienza con questi dispositivi

Comunque ho isolato la parte di output relativa al dispositivo:

Codice: Seleziona tutto

[   70.196128] usb 1-1: new high speed USB device using ehci_hcd and address 3
[   70.329589] usb 1-1: configuration #1 chosen from 1 choice
[   70.574661] usb 1-1: usbfs: process 1309 (usb_modeswitch) did not claim interface 0 before use
[   70.575792] usb 1-1: USB disconnect, address 3
[   70.634684] Initializing USB Mass Storage driver...
[   70.634856] usbcore: registered new interface driver usb-storage
[   70.634866] USB Mass Storage support registered.
[   81.709086] usb 1-1: new high speed USB device using ehci_hcd and address 4
[   81.842862] usb 1-1: configuration #1 chosen from 1 choice
[   81.846563] scsi6 : SCSI emulation for USB Mass Storage devices
[   81.847197] usb-storage: device found at 4
[   81.847211] usb-storage: waiting for device to settle before scanning
[   81.847918] scsi7 : SCSI emulation for USB Mass Storage devices
[   81.850341] usb-storage: device found at 4
[   81.850355] usb-storage: waiting for device to settle before scanning
[   81.929512] usbcore: registered new interface driver usbserial
[   81.929612] USB Serial support registered for generic
[   81.929849] usbcore: registered new interface driver usbserial_generic
[   81.929863] usbserial: USB Serial Driver core
[   82.029147] option: Unknown parameter `&&'
[   82.068074] option: Unknown parameter `&&'
[   82.088431] option: Unknown parameter `&&'
[   82.107919] option: Unknown parameter `&&'
[   82.135646] option: Unknown parameter `&&'
[   82.154754] option: Unknown parameter `&&'
[   82.183566] option: Unknown parameter `&&'
[   86.844464] usb-storage: device scan complete
[   86.845687] scsi 6:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
[   86.845804] scsi: killing requests for dead queue
[   86.845910] scsi: killing requests for dead queue
[   86.846017] scsi: killing requests for dead queue
[   86.846117] scsi: killing requests for dead queue
[   86.846215] scsi: killing requests for dead queue
[   86.846316] scsi: killing requests for dead queue
[   86.846415] scsi: killing requests for dead queue
[   86.846519] scsi: killing requests for dead queue
[   86.853592] usb-storage: device scan complete
[   86.854543] scsi 7:0:0:0: Direct-Access     HUAWEI   SD Storage       2.31 PQ: 0 ANSI: 2
[   86.854644] scsi: killing requests for dead queue
[   86.854749] scsi: killing requests for dead queue
[   86.854887] scsi: killing requests for dead queue
[   86.855098] scsi: killing requests for dead queue
[   86.855208] scsi: killing requests for dead queue
[   86.855311] scsi: killing requests for dead queue
[   86.855478] scsi: killing requests for dead queue
[   86.855580] scsi: killing requests for dead queue
[   86.859510] sr0: scsi-1 drive
[   86.859519] Uniform CD-ROM driver Revision: 3.20
[   86.862786] sr 6:0:0:0: Attached scsi CD-ROM sr0
[   86.869592] sr 6:0:0:0: Attached scsi generic sg1 type 5
[   86.878524] sd 7:0:0:0: Attached scsi generic sg2 type 0
[   86.882188] sd 7:0:0:0: [sdb] Attached SCSI removable disk

e in particolare la terza riga ha catturato la mia attenzione

[Pastenaca]

Ignoro molto in materia... 

di che stiamo parlando?

e non so se riaprire la discussione o postarla come altro problema perchè in realta con NM non ho risolto ho aggirato il problema

anche oggi ho provato ed è tutto come spiegato ieri, anche il blocco del portatile al riavvio...

praticamente si spegne e si riaccende con schermata nera ancora prima di poter scegliere se entrare nel bios

[cristian_c]

Prova a digitare nuovamente dmesg senza attivare sakis3g

[Pastenaca]

te lo posto stasera ora non ho un'altra connessione per evitare di attivare la chiavetta con Sakis...

[Pastenaca]

eccomi...
ho acceso il netbook con la chiavetta già inserita e NM non la vede ancora
comando dmesg

Codice: Seleziona tutto

fffff
[    0.510314] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03
[    0.510323] pci 0000:00:1c.2:   IO window: 0x1000-0x2fff
[    0.510336] pci 0000:00:1c.2:   MEM window: 0x93000000-0x940fffff
[    0.510348] pci 0000:00:1c.2:   PREFETCH window: 0x00000092000000-0x00000092ffffff
[    0.510363] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[    0.510370] pci 0000:00:1e.0:   IO window: disabled
[    0.510381] pci 0000:00:1e.0:   MEM window: disabled
[    0.510391] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.510430]   alloc irq_desc for 16 on node -1
[    0.510437]   alloc kstat_irqs on node -1
[    0.510455] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.510468] pci 0000:00:1c.0: setting latency timer to 64
[    0.510487] pci 0000:00:1c.1: enabling device (0000 -> 0003)
[    0.510499]   alloc irq_desc for 17 on node -1
[    0.510505]   alloc kstat_irqs on node -1
[    0.510517] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.510530] pci 0000:00:1c.1: setting latency timer to 64
[    0.510552]   alloc irq_desc for 18 on node -1
[    0.510558]   alloc kstat_irqs on node -1
[    0.510569] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.510580] pci 0000:00:1c.2: setting latency timer to 64
[    0.510598] pci 0000:00:1e.0: setting latency timer to 64
[    0.510610] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.510619] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.510628] pci_bus 0000:01: resource 0 io:  [0x4000-0x4fff]
[    0.510636] pci_bus 0000:01: resource 1 mem: [0x95100000-0x961fffff]
[    0.510645] pci_bus 0000:01: resource 2 pref mem [0x90000000-0x90ffffff]
[    0.510654] pci_bus 0000:02: resource 0 io:  [0x3000-0x3fff]
[    0.510663] pci_bus 0000:02: resource 1 mem: [0x94100000-0x950fffff]
[    0.510672] pci_bus 0000:02: resource 2 pref mem [0x91000000-0x91ffffff]
[    0.510681] pci_bus 0000:03: resource 0 io:  [0x1000-0x2fff]
[    0.510689] pci_bus 0000:03: resource 1 mem: [0x93000000-0x940fffff]
[    0.510698] pci_bus 0000:03: resource 2 pref mem [0x92000000-0x92ffffff]
[    0.510707] pci_bus 0000:04: resource 3 io:  [0x00-0xffff]
[    0.510715] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff]
[    0.510821] NET: Registered protocol family 2
[    0.511116] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.512088] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.513250] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.513829] TCP: Hash tables configured (established 131072 bind 65536)
[    0.513840] TCP reno registered
[    0.514139] NET: Registered protocol family 1
[    0.514213] pci 0000:00:02.0: Boot video device
[    0.514540] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[    0.514548] Simple Boot Flag at 0x44 set to 0x1
[    0.515072] cpufreq-nforce2: No nForce2 chipset.
[    0.515162] Scanning for low memory corruption every 60 seconds
[    0.515547] audit: initializing netlink socket (disabled)
[    0.515576] type=2000 audit(1324580556.515:1): initialized
[    0.537173] highmem bounce pool size: 64 pages
[    0.537191] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.542442] VFS: Disk quotas dquot_6.5.2
[    0.542641] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.544758] fuse init (API version 7.13)
[    0.545064] msgmni has been set to 1690
[    0.545793] alg: No test for stdrng (krng)
[    0.545999] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.546009] io scheduler noop registered
[    0.546015] io scheduler anticipatory registered
[    0.546021] io scheduler deadline registered
[    0.546157] io scheduler cfq registered (default)
[    0.546517]   alloc irq_desc for 24 on node -1
[    0.546526]   alloc kstat_irqs on node -1
[    0.546548] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[    0.546568] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.546847]   alloc irq_desc for 25 on node -1
[    0.546854]   alloc kstat_irqs on node -1
[    0.546872] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[    0.546890] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.547170]   alloc irq_desc for 26 on node -1
[    0.547177]   alloc kstat_irqs on node -1
[    0.547195] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
[    0.547230] pcieport 0000:00:1c.2: setting latency timer to 64
[    0.547482] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.547771] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[    0.547792] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7016a38), AE_ALREADY_EXISTS
[    0.548158] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[    0.548178] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7016a38), AE_ALREADY_EXISTS
[    0.548535] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[    0.548554] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7016a38), AE_ALREADY_EXISTS
[    0.548954] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[    0.548973] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7016a38), AE_ALREADY_EXISTS
[    0.549334] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[    0.549355] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7016a38), AE_ALREADY_EXISTS
[    0.549704] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[    0.549723] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7016a38), AE_ALREADY_EXISTS
[    0.549864] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.596611] Freeing initrd memory: 7813k freed
[    0.611474] ACPI: AC Adapter [AC] (on-line)
[    0.611705] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.611714] ACPI: Power Button [PWRB]
[    0.611813] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    0.611909] ACPI: Lid Switch [LID0]
[    0.612010] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    0.612017] ACPI: Sleep Button [SLPB]
[    0.612145] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.612152] ACPI: Power Button [PWRF]
[    0.612459] fan PNP0C0B:00: registered as cooling_device0
[    0.612473] ACPI: Fan [FAN] (on)
[    0.613870] ACPI: SSDT 7f592c90 00239 (v02  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.614684] ACPI: SSDT 7f591e10 001C7 (v02  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.616379] Marking TSC unstable due to TSC halts in idle
[    0.616528] Switching to clocksource hpet
[    0.616552] processor LNXCPU:00: registered as cooling_device1
[    0.617450] ACPI: SSDT 7f592f10 000D0 (v02  PmRef  Cpu1Ist 00003000 INTL 20051117)
[    0.618189] ACPI: SSDT 7f590f10 00083 (v02  PmRef  Cpu1Cst 00003000 INTL 20051117)
[    0.620004] processor LNXCPU:01: registered as cooling_device2
[    0.687468] thermal LNXTHERM:01: registered as thermal_zone0
[    0.687487] ACPI: Thermal Zone [THRM] (27 C)
[    0.687837] isapnp: Scanning for PnP cards...
[    0.692427] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.696192] brd: module loaded
[    0.697654] loop: module loaded
[    0.697918] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[    0.698177] ata_piix 0000:00:1f.1: version 2.13
[    0.698208] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.698289] ata_piix 0000:00:1f.1: setting latency timer to 64
[    0.698490] scsi0 : ata_piix
[    0.698736] scsi1 : ata_piix
[    0.700127] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x50c0 irq 14
[    0.700136] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x50c8 irq 15
[    0.701220] Fixed MDIO Bus: probed
[    0.701330] PPP generic driver version 2.4.2
[    0.701473] tun: Universal TUN/TAP device driver, 1.6
[    0.701480] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.701750] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.701801] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.701837] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.701846] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.701939] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.701998] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    0.702018] ehci_hcd 0000:00:1d.7: debug port 1
[    0.705920] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.705969] ehci_hcd 0000:00:1d.7: irq 16, io mem 0x96344400
[    0.710199] ata2: port disabled. ignoring.
[    0.720036] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.720307] usb usb1: configuration #1 chosen from 1 choice
[    0.720401] hub 1-0:1.0: USB hub found
[    0.720424] hub 1-0:1.0: 8 ports detected
[    0.720608] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.720655] uhci_hcd: USB Universal Host Controller Interface driver
[    0.720745] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.720764] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.720773] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.720874] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.720920] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000050a0
[    0.721174] usb usb2: configuration #1 chosen from 1 choice
[    0.721252] hub 2-0:1.0: USB hub found
[    0.721271] hub 2-0:1.0: 2 ports detected
[    0.721388] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.721403] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.721412] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.721500] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.721561] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00005080
[    0.721812] usb usb3: configuration #1 chosen from 1 choice
[    0.721890] hub 3-0:1.0: USB hub found
[    0.721909] hub 3-0:1.0: 2 ports detected
[    0.722019] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.722034] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.722042] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.722137] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.722194] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005060
[    0.722463] usb usb4: configuration #1 chosen from 1 choice
[    0.722544] hub 4-0:1.0: USB hub found
[    0.722564] hub 4-0:1.0: 2 ports detected
[    0.722674]   alloc irq_desc for 19 on node -1
[    0.722681]   alloc kstat_irqs on node -1
[    0.722696] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.722711] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.722719] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.722825] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.722885] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00005040
[    0.723132] usb usb5: configuration #1 chosen from 1 choice
[    0.723211] hub 5-0:1.0: USB hub found
[    0.723230] hub 5-0:1.0: 2 ports detected
[    0.723468] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[    0.750067] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.750087] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.750447] mice: PS/2 mouse device common for all mice
[    0.750877] rtc_cmos 00:03: RTC can wake from S4
[    0.750980] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.751029] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.751360] device-mapper: uevent: version 1.0.3
[    0.751661] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    0.751859] device-mapper: multipath: version 1.1.0 loaded
[    0.751867] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.752250] EISA: Probing bus 0 at eisa.0
[    0.752264] Cannot allocate resource for EISA slot 1
[    0.752270] Cannot allocate resource for EISA slot 2
[    0.752277] Cannot allocate resource for EISA slot 3
[    0.752283] Cannot allocate resource for EISA slot 4
[    0.752289] Cannot allocate resource for EISA slot 5
[    0.752315] EISA: Detected 0 cards.
[    0.752701] cpuidle: using governor ladder
[    0.752958] cpuidle: using governor menu
[    0.754173] TCP cubic registered
[    0.754684] NET: Registered protocol family 10
[    0.757032] NET: Registered protocol family 17
[    0.759182] Using IPI No-Shortcut mode
[    0.759440] PM: Resume from disk failed.
[    0.759469] registered taskstats version 1
[    0.760232]   Magic number: 7:667:41
[    0.760255] bdi 7:6: hash matches
[    0.760386] rtc_cmos 00:03: setting system clock to 2011-12-22 19:02:37 UTC (1324580557)
[    0.760395] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.760401] EDD information not available.
[    0.771130] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[    1.044051] usb 1-2: new high speed USB device using ehci_hcd and address 2
[    1.046154] isapnp: No Plug & Play device found
[    1.046271] Freeing unused kernel memory: 668k freed
[    1.046864] Write protecting the kernel text: 4684k
[    1.046944] Write protecting the kernel read-only data: 1844k
[    1.086455] udev: starting version 151
[    1.209943] usb 1-2: configuration #1 chosen from 1 choice
[    1.340418] ACPI: Battery Slot [BAT0] (battery present)
[    2.080127] usb 1-1: new high speed USB device using ehci_hcd and address 3
[    2.209082] ahci 0000:00:1f.2: version 3.0
[    2.209123] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    2.209203]   alloc irq_desc for 27 on node -1
[    2.209210]   alloc kstat_irqs on node -1
[    2.209233] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
[    2.209316] ahci: SSS flag set, parallel bus scan disabled
[    2.209379] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
[    2.209392] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part
[    2.209406] ahci 0000:00:1f.2: setting latency timer to 64
[    2.209893] scsi2 : ahci
[    2.210160] scsi3 : ahci
[    2.210389] scsi4 : ahci
[    2.210606] scsi5 : ahci
[    2.211339] ata3: SATA max UDMA/133 abar m1024@0x96344000 port 0x96344100 irq 27
[    2.211350] ata4: DUMMY
[    2.211358] ata5: SATA max UDMA/133 abar m1024@0x96344000 port 0x96344200 irq 27
[    2.211366] ata6: DUMMY
[    2.213143] usb 1-1: configuration #1 chosen from 1 choice
[    2.260005] Initializing USB Mass Storage driver...
[    2.260391] scsi6 : SCSI emulation for USB Mass Storage devices
[    2.260954] usb-storage: device found at 3
[    2.260962] usb-storage: waiting for device to settle before scanning
[    2.261146] scsi7 : SCSI emulation for USB Mass Storage devices
[    2.261443] usbcore: registered new interface driver usb-storage
[    2.261454] USB Mass Storage support registered.
[    2.261471] usb-storage: device found at 3
[    2.261477] usb-storage: waiting for device to settle before scanning
[    2.528100] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.529535] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    2.529998] ata3.00: ATA-8: Hitachi HTS543216L9SA00, FB2OC40C, max UDMA/133
[    2.530013] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.531873] ata3.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    2.532403] ata3.00: configured for UDMA/133
[    2.548500] scsi 2:0:0:0: Direct-Access     ATA      Hitachi HTS54321 FB2O PQ: 0 ANSI: 5
[    2.549050] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    2.549352] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    2.549502] sd 2:0:0:0: [sda] Write Protect is off
[    2.549510] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.549580] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.549952]  sda: sda1 sda2 sda3 < sda5 sda6 >
[    2.611230] sd 2:0:0:0: [sda] Attached SCSI disk
[    2.868109] ata5: SATA link down (SStatus 0 SControl 300)
[    3.625426] EXT4-fs (sda5): mounted filesystem with ordered data mode
[    7.260560] usb-storage: device scan complete
[    7.260566] usb-storage: device scan complete
[    7.261662] scsi 7:0:0:0: Direct-Access     HUAWEI   SD Storage       2.31 PQ: 0 ANSI: 2
[    7.261726] scsi 6:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
[    7.261794] scsi: killing requests for dead queue
[    7.261863] scsi: killing requests for dead queue
[    7.261929] scsi: killing requests for dead queue
[    7.262013] scsi: killing requests for dead queue
[    7.262067] scsi: killing requests for dead queue
[    7.262165] scsi: killing requests for dead queue
[    7.262215] scsi: killing requests for dead queue
[    7.262396] scsi: killing requests for dead queue
[    7.262402] scsi: killing requests for dead queue
[    7.262549] scsi: killing requests for dead queue
[    7.262558] scsi: killing requests for dead queue
[    7.262693] scsi: killing requests for dead queue
[    7.262701] scsi: killing requests for dead queue
[    7.262837] scsi: killing requests for dead queue
[    7.262846] scsi: killing requests for dead queue
[    7.262971] scsi: killing requests for dead queue
[    7.267227] sr0: scsi-1 drive
[    7.267240] Uniform CD-ROM driver Revision: 3.20
[    7.267637] sr 6:0:0:0: Attached scsi CD-ROM sr0
[    7.267781] sr 6:0:0:0: Attached scsi generic sg1 type 5
[    7.268268] sd 7:0:0:0: Attached scsi generic sg2 type 0
[    7.270368] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[   13.585828] Adding 4152760k swap on /dev/sda6.  Priority:-1 extents:1 across:4152760k
[   13.782852] udev: starting version 151
[   13.847193] lp: driver loaded but no devices found
[   13.934849] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[   13.937128] acpi device:18: registered as cooling_device3
[   13.938743] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[   13.939141] ACPI: Video Device [OVGA] (multi-head: yes  rom: yes  post: no)
[   14.545111] Linux agpgart interface v0.103
[   14.566496] atl1c 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   14.566523] atl1c 0000:03:00.0: setting latency timer to 64
[   14.632186] intel_rng: FWH not detected
[   14.633494] scsi: killing requests for dead queue
[   14.637209] usb 1-1: usbfs: process 500 (usb_modeswitch) did not claim interface 0 before use
[   14.638741] usb 1-1: USB disconnect, address 3
[   14.648789] scsi: killing requests for dead queue
[   14.659590] atl1c 0000:03:00.0: version 1.0.0.1-NAPI
[   14.765844] Linux video capture interface: v2.00
[   14.965609] [drm] Initialized drm 1.1.0 20060810
[   14.974560] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[   14.974912] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[   14.990703] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
[   15.006944] type=1505 audit(1324576971.743:2):  operation="profile_load" pid=618 name="/sbin/dhclient3"
[   15.007770] type=1505 audit(1324576971.743:3):  operation="profile_load" pid=618 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   15.008371] acer-wmi: Acer Laptop ACPI-WMI Extras
[   15.027244] type=1505 audit(1324576971.763:4):  operation="profile_load" pid=618 name="/usr/lib/connman/scripts/dhclient-script"
[   15.055045] uvcvideo: Found UVC 1.00 device WebCam (0c45:62c0)
[   15.071869] input: WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/input/input7
[   15.072225] usbcore: registered new interface driver uvcvideo
[   15.072238] USB Video Class driver (v0.1.0)
[   15.136334] acer-wmi: Unable to detect available WMID devices
[   15.248261] cfg80211: Calling CRDA to update world regulatory domain
[   15.430213]   alloc irq_desc for 28 on node -1
[   15.430223]   alloc kstat_irqs on node -1
[   15.430253] atl1c 0000:03:00.0: irq 28 for MSI/MSI-X
[   15.431360] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   15.451629] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   15.451644] i915 0000:00:02.0: setting latency timer to 64
[   15.549855] [drm] set up 7M of stolen space
[   15.562679] cfg80211: World regulatory domain updated:
[   15.562689]    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   15.562700]    (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   15.562708]    (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   15.562717]    (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   15.562725]    (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   15.562733]    (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   15.704840] ath5k 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   15.704869] ath5k 0000:01:00.0: setting latency timer to 64
[   15.704953] ath5k 0000:01:00.0: registered as 'phy0'
[   15.957821] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04771/0xa40000/0xa0000
[   15.992562] type=1505 audit(1324576972.731:5):  operation="profile_load" pid=768 name="/usr/share/gdm/guest-session/Xsession"
[   15.994775] type=1505 audit(1324576972.731:6):  operation="profile_replace" pid=769 name="/sbin/dhclient3"
[   15.997418] type=1505 audit(1324576972.736:7):  operation="profile_replace" pid=769 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   15.997892] type=1505 audit(1324576972.736:8):  operation="profile_replace" pid=769 name="/usr/lib/connman/scripts/dhclient-script"
[   16.036764] type=1505 audit(1324576972.775:9):  operation="profile_load" pid=772 name="/usr/lib/cups/backend/cups-pdf"
[   16.037792] type=1505 audit(1324576972.775:10):  operation="profile_load" pid=772 name="/usr/sbin/cupsd"
[   16.062695] type=1505 audit(1324576972.799:11):  operation="profile_load" pid=773 name="/usr/sbin/tcpdump"
[   16.065131] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[   16.174492] [drm] initialized overlay support
[   16.281329] ath: EEPROM regdomain: 0x65
[   16.281337] ath: EEPROM indicates we should expect a direct regpair map
[   16.281347] ath: Country alpha2 being used: 00
[   16.281351] ath: Regpair used: 0x65
[   16.299686] phy0: Selected rate control algorithm 'minstrel'
[   16.301614] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[   16.468696] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   16.603112] fb0: inteldrmfb frame buffer device
[   16.603121] registered panic notifier
[   16.603141] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   16.603245] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   16.603312] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   16.618976] vga16fb: initializing
[   16.618989] vga16fb: mapped to 0xc00a0000
[   16.619001] vga16fb: not registering due to another framebuffer present
[   16.760294] hda_codec: ALC272: BIOS auto-probing.
[   16.762409] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[   16.897089] Console: switching to colour frame buffer device 128x37
[   16.942180] ppdev: user-space parallel port driver
[   17.581665] CPU0 attaching NULL sched-domain.
[   17.581681] CPU1 attaching NULL sched-domain.
[   17.624142] CPU0 attaching sched-domain:
[   17.624154]  domain 0: span 0-1 level SIBLING
[   17.624162]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[   17.624181]   domain 1: span 0-1 level MC
[   17.624188]    groups: 0-1 (cpu_power = 1178)
[   17.624204] CPU1 attaching sched-domain:
[   17.624211]  domain 0: span 0-1 level SIBLING
[   17.624219]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[   17.624236]   domain 1: span 0-1 level MC
[   17.624243]    groups: 0-1 (cpu_power = 1178)
[   22.652565] CPU0 attaching NULL sched-domain.
[   22.652582] CPU1 attaching NULL sched-domain.
[   22.773118] CPU0 attaching sched-domain:
[   22.773127]  domain 0: span 0-1 level SIBLING
[   22.773134]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[   22.773147]   domain 1: span 0-1 level MC
[   22.773152]    groups: 0-1 (cpu_power = 1178)
[   22.773164] CPU1 attaching sched-domain:
[   22.773169]  domain 0: span 0-1 level SIBLING
[   22.773175]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[   22.773186]   domain 1: span 0-1 level MC
[   22.773192]    groups: 0-1 (cpu_power = 1178)
[   25.792726] usb 1-1: new high speed USB device using ehci_hcd and address 4
[   26.005715] usb 1-1: configuration #1 chosen from 1 choice
[   26.014956] scsi8 : SCSI emulation for USB Mass Storage devices
[   26.024553] usb-storage: device found at 4
[   26.024561] usb-storage: waiting for device to settle before scanning
[   26.024661] scsi9 : SCSI emulation for USB Mass Storage devices
[   26.028621] usb-storage: device found at 4
[   26.028629] usb-storage: waiting for device to settle before scanning
[   26.104271] usbcore: registered new interface driver usbserial
[   26.104320] USB Serial support registered for generic
[   26.104447] usbcore: registered new interface driver usbserial_generic
[   26.104455] usbserial: USB Serial Driver core
[   26.199997] option: Unknown parameter `&&'
[   26.240164] option: Unknown parameter `&&'
[   26.266828] option: Unknown parameter `&&'
[   26.296092] option: Unknown parameter `&&'
[   26.321123] option: Unknown parameter `&&'
[   26.348081] option: Unknown parameter `&&'
[   26.373559] option: Unknown parameter `&&'
[   31.020549] usb-storage: device scan complete
[   31.021414] scsi 8:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
[   31.021552] scsi: killing requests for dead queue
[   31.021663] scsi: killing requests for dead queue
[   31.021768] scsi: killing requests for dead queue
[   31.021873] scsi: killing requests for dead queue
[   31.021977] scsi: killing requests for dead queue
[   31.022080] scsi: killing requests for dead queue
[   31.022186] scsi: killing requests for dead queue
[   31.022291] scsi: killing requests for dead queue
[   31.024646] usb-storage: device scan complete
[   31.027136] scsi 9:0:0:0: Direct-Access     HUAWEI   SD Storage       2.31 PQ: 0 ANSI: 2
[   31.027291] scsi: killing requests for dead queue
[   31.027424] scsi: killing requests for dead queue
[   31.027551] scsi: killing requests for dead queue
[   31.027658] scsi: killing requests for dead queue
[   31.027770] scsi: killing requests for dead queue
[   31.027879] scsi: killing requests for dead queue
[   31.028057] scsi: killing requests for dead queue
[   31.028192] scsi: killing requests for dead queue
[   31.030121] sr0: scsi-1 drive
[   31.030532] sr 8:0:0:0: Attached scsi CD-ROM sr0
[   31.030751] sr 8:0:0:0: Attached scsi generic sg1 type 5
[   31.036333] sd 9:0:0:0: Attached scsi generic sg2 type 0
[   31.049338] sd 9:0:0:0: [sdb] Attached SCSI removable disk
[   49.587818] wlan0: direct probe to AP c4:3d:c7:55:3b:30 (try 1)
[   49.587876] wlan0: deauthenticating from c4:3d:c7:55:3b:30 by local choice (reason=3)
[   49.587956] wlan0: direct probe to AP c4:3d:c7:55:3b:30 (try 1)
[   49.591765] wlan0: direct probe responded
[   49.591778] wlan0: authenticate with AP c4:3d:c7:55:3b:30 (try 1)
[   49.598568] wlan0: authenticated
[   49.598628] wlan0: associate with AP c4:3d:c7:55:3b:30 (try 1)
[   49.601149] wlan0: RX AssocResp from c4:3d:c7:55:3b:30 (capab=0x411 status=0 aid=1)
[   49.601161] wlan0: associated
[   49.602824] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   50.355870] padlock: VIA PadLock not detected.
[   59.609073] wlan0: no IPv6 routers present
massi@massi-laptop:~$


[Pastenaca]

per curiosità ho anche provato ad installare Gnome-ppp

beh neanche lui rileva il modem fino a quando non uso Sakis

quindi la domanda è: cosa mai attiverà Sakis che NM e Gnome-ppp non riescono??