edit: Virtualbox ... modprobe vboxdrv failed - somebody help? :(

[spoonriver]

Su questa guida http://wiki.ubuntu-it.org/Virtualizzazi ... neProblemi
avrei trovato in teoria la soluzione al mio problema ma...

Codice: Seleziona tutto

Errore del modulo vboxdrv kernel

È probabile che all'avvio venga visualizzato il seguente errore:

VirtualBox kernel driver not installed. The vboxdrv kernel module was either not loaded or /dev/vboxdrv was not created for some reason. Re-setup the kernel module by executing '/etc/init.d/vboxdrv setup' as root.

Per aggirare il problema, è sufficiente modificare il file /boot/grub/menu.lst con un editor di testo con i privilegi di amministrazione e cercare la seguente riga all'interno del file:

kernel          /boot/vmlinuz-2.6.20-15-generic root=UUID=2fddcf25-6c7f-4acd-92ec-8638d9453389 ro quiet splash

Aggiungere in fondo alla riga trovata ciò che segue:

nmi_watchdog=0

Salvare il file, chiudere l'editor e riavviare il computer. Infine, digitare il seguente comando in una finestra di terminale:

sudo /etc/init.d/vboxdrv setup

non esiste alcun file menu.lst dentro la mia cartella di GRUB... mi sembra di ricordare che da un certo momento lo tolsero del tutto (prima lo usavo per ordinare i sistemi operativi all'avvio).

Come faccio?

[Freddy85]

ti consiglio di installare virtualbox dal suo sito
https://www.virtualbox.org/wiki/Downloads

[spoonriver]

ho provato sia da apt-get che dai deb trovati su un sito per l'ultima versione.

Ora riprovo dal sito ufficiale

[Freddy85]

ok, io l'0ho installato ieri e non ho avuto nessun tipo di problemi..fammi sapere

[Laycastle]

Il file menu.lst è di grub legacy, quelle informazioni mi sembrano obsolete.
Dai

Codice: Seleziona tutto

sudo /etc/init.d/vboxdrv setup

e riavvia, poi prova se funziona. Se il comando non va a buon fine riporta l'errore.

Ciao

[spoonriver]

Si mi sembrava infatti una cosa vecchia... ad ogni modo avevo provato il comando (ripetuto adesso, ho anche installato la nuova versione dal sito): mi dice

Codice: Seleziona tutto

cab@cab-laptop:~$ sudo /etc/init.d/vboxdrv setup
 * Stopping VirtualBox kernel modules                                    [ OK ] 
 * Uninstalling old VirtualBox DKMS kernel modules                       [ OK ] 
 * Trying to register the VirtualBox kernel modules using DKMS           [ OK ] 
 * Starting VirtualBox kernel modules                                           
 * modprobe vboxdrv failed. Please use 'dmesg' to find out why
cab@cab-laptop:~$ 

ho provato a scrivere dmesg:

Codice: Seleziona tutto

n
[11794.976717]          res 51/40:00:fe:c8:51/00:00:00:00:00/e0 Emask 0x9 (media error)
[11794.976725] ata1.00: status: { DRDY ERR }
[11794.976732] ata1.00: error: { UNC }
[11795.001565] ata1.00: configured for UDMA/100
[11795.001595] ata1: EH complete
[11797.399096] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[11797.399104] ata1.00: BMDMA2 stat 0x82c0009
[11797.399109] ata1.00: failed command: READ DMA
[11797.399117] ata1.00: cmd c8/00:08:f8:c8:51/00:00:00:00:00/e0 tag 0 dma 4096 in
[11797.399119]          res 51/40:00:fe:c8:51/00:00:00:00:00/e0 Emask 0x9 (media error)
[11797.399123] ata1.00: status: { DRDY ERR }
[11797.399126] ata1.00: error: { UNC }
[11797.421053] ata1.00: configured for UDMA/100
[11797.421087] sd 0:0:0:0: [sda] Unhandled sense code
[11797.421093] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[11797.421103] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor]
[11797.421116] Descriptor sense data with sense descriptors (in hex):
[11797.421122]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 
[11797.421151]         00 51 c8 fe 
[11797.421163] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed
[11797.421177] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 51 c8 f8 00 00 08 00
[11797.421203] end_request: I/O error, dev sda, sector 5359870
[11797.421254] ata1: EH complete
[11975.344003] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[11975.344014] ata1.00: BMDMA2 stat 0x82c0009
[11975.344024] ata1.00: failed command: READ DMA
[11975.344041] ata1.00: cmd c8/00:08:68:f2:51/00:00:00:00:00/e0 tag 0 dma 4096 in
[11975.344045]          res 51/40:00:6a:f2:51/00:00:00:00:00/e0 Emask 0x9 (media error)
[11975.344053] ata1.00: status: { DRDY ERR }
[11975.344060] ata1.00: error: { UNC }
[11975.364942] ata1.00: configured for UDMA/100
[11975.364969] ata1: EH complete
[11977.765461] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[11977.765473] ata1.00: BMDMA2 stat 0x82c0009
[11977.765482] ata1.00: failed command: READ DMA
[11977.765499] ata1.00: cmd c8/00:08:68:f2:51/00:00:00:00:00/e0 tag 0 dma 4096 in
[11977.765503]          res 51/40:00:6a:f2:51/00:00:00:00:00/e0 Emask 0x9 (media error)
[11977.765511] ata1.00: status: { DRDY ERR }
[11977.765518] ata1.00: error: { UNC }
[11977.789358] ata1.00: configured for UDMA/100
[11977.789390] ata1: EH complete
[11980.187898] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[11980.187908] ata1.00: BMDMA2 stat 0x82c0009
[11980.187918] ata1.00: failed command: READ DMA
[11980.187935] ata1.00: cmd c8/00:08:68:f2:51/00:00:00:00:00/e0 tag 0 dma 4096 in
[11980.187939]          res 51/40:00:6a:f2:51/00:00:00:00:00/e0 Emask 0x9 (media error)
[11980.187947] ata1.00: status: { DRDY ERR }
[11980.187954] ata1.00: error: { UNC }
[11980.208856] ata1.00: configured for UDMA/100
[11980.208886] ata1: EH complete
[11982.610307] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[11982.610319] ata1.00: BMDMA2 stat 0x82c0009
[11982.610328] ata1.00: failed command: READ DMA
[11982.610345] ata1.00: cmd c8/00:08:68:f2:51/00:00:00:00:00/e0 tag 0 dma 4096 in
[11982.610349]          res 51/40:00:6a:f2:51/00:00:00:00:00/e0 Emask 0x9 (media error)
[11982.610358] ata1.00: status: { DRDY ERR }
[11982.610364] ata1.00: error: { UNC }
[11982.633240] ata1.00: configured for UDMA/100
[11982.633270] ata1: EH complete
[11985.043767] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[11985.043778] ata1.00: BMDMA2 stat 0x82c0009
[11985.043787] ata1.00: failed command: READ DMA
[11985.043804] ata1.00: cmd c8/00:08:68:f2:51/00:00:00:00:00/e0 tag 0 dma 4096 in
[11985.043808]          res 51/40:00:6a:f2:51/00:00:00:00:00/e0 Emask 0x9 (media error)
[11985.043816] ata1.00: status: { DRDY ERR }
[11985.043822] ata1.00: error: { UNC }
[11985.064771] ata1.00: configured for UDMA/100
[11985.064803] ata1: EH complete
[11987.477202] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[11987.477214] ata1.00: BMDMA2 stat 0x82c0009
[11987.477223] ata1.00: failed command: READ DMA
[11987.477240] ata1.00: cmd c8/00:08:68:f2:51/00:00:00:00:00/e0 tag 0 dma 4096 in
[11987.477244]          res 51/40:00:6a:f2:51/00:00:00:00:00/e0 Emask 0x9 (media error)
[11987.477252] ata1.00: status: { DRDY ERR }
[11987.477259] ata1.00: error: { UNC }
[11987.501149] ata1.00: configured for UDMA/100
[11987.501184] sd 0:0:0:0: [sda] Unhandled sense code
[11987.501190] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[11987.501200] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor]
[11987.501212] Descriptor sense data with sense descriptors (in hex):
[11987.501218]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 
[11987.501247]         00 51 f2 6a 
[11987.501259] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed
[11987.501274] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 51 f2 68 00 00 08 00
[11987.501300] end_request: I/O error, dev sda, sector 5370474
[11987.501349] ata1: EH complete
[12058.999108] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12058.999119] ata1.00: BMDMA2 stat 0x82c0009
[12058.999129] ata1.00: failed command: READ DMA
[12058.999146] ata1.00: cmd c8/00:08:68:f2:51/00:00:00:00:00/e0 tag 0 dma 4096 in
[12058.999149]          res 51/40:00:6a:f2:51/00:00:00:00:00/e0 Emask 0x9 (media error)
[12058.999158] ata1.00: status: { DRDY ERR }
[12058.999164] ata1.00: error: { UNC }
[12059.021072] ata1.00: configured for UDMA/100
[12059.021099] ata1: EH complete
[12061.421550] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12061.421557] ata1.00: BMDMA2 stat 0x82c0009
[12061.421562] ata1.00: failed command: READ DMA
[12061.421570] ata1.00: cmd c8/00:08:68:f2:51/00:00:00:00:00/e0 tag 0 dma 4096 in
[12061.421572]          res 51/40:00:6a:f2:51/00:00:00:00:00/e0 Emask 0x9 (media error)
[12061.421576] ata1.00: status: { DRDY ERR }
[12061.421579] ata1.00: error: { UNC }
[12061.445458] ata1.00: configured for UDMA/100
[12061.445489] ata1: EH complete
[12063.844000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12063.844011] ata1.00: BMDMA2 stat 0x82c0009
[12063.844020] ata1.00: failed command: READ DMA
[12063.844037] ata1.00: cmd c8/00:08:68:f2:51/00:00:00:00:00/e0 tag 0 dma 4096 in
[12063.844041]          res 51/40:00:6a:f2:51/00:00:00:00:00/e0 Emask 0x9 (media error)
[12063.844049] ata1.00: status: { DRDY ERR }
[12063.844056] ata1.00: error: { UNC }
[12063.864915] ata1.00: configured for UDMA/100
[12063.864945] ata1: EH complete
[12066.265418] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12066.265429] ata1.00: BMDMA2 stat 0x82c0009
[12066.265439] ata1.00: failed command: READ DMA
[12066.265455] ata1.00: cmd c8/00:08:68:f2:51/00:00:00:00:00/e0 tag 0 dma 4096 in
[12066.265459]          res 51/40:00:6a:f2:51/00:00:00:00:00/e0 Emask 0x9 (media error)
[12066.265468] ata1.00: status: { DRDY ERR }
[12066.265474] ata1.00: error: { UNC }
[12066.289320] ata1.00: configured for UDMA/100
[12066.289347] ata1: EH complete
[12068.687860] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12068.687871] ata1.00: BMDMA2 stat 0x82c0009
[12068.687880] ata1.00: failed command: READ DMA
[12068.687897] ata1.00: cmd c8/00:08:68:f2:51/00:00:00:00:00/e0 tag 0 dma 4096 in
[12068.687901]          res 51/40:00:6a:f2:51/00:00:00:00:00/e0 Emask 0x9 (media error)
[12068.687910] ata1.00: status: { DRDY ERR }
[12068.687916] ata1.00: error: { UNC }
[12068.708819] ata1.00: configured for UDMA/100
[12068.708849] ata1: EH complete
[12071.110287] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12071.110294] ata1.00: BMDMA2 stat 0x82c0009
[12071.110299] ata1.00: failed command: READ DMA
[12071.110308] ata1.00: cmd c8/00:08:68:f2:51/00:00:00:00:00/e0 tag 0 dma 4096 in
[12071.110309]          res 51/40:00:6a:f2:51/00:00:00:00:00/e0 Emask 0x9 (media error)
[12071.110313] ata1.00: status: { DRDY ERR }
[12071.110316] ata1.00: error: { UNC }
[12071.138166] ata1.00: configured for UDMA/100
[12071.138199] sd 0:0:0:0: [sda] Unhandled sense code
[12071.138202] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[12071.138207] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor]
[12071.138214] Descriptor sense data with sense descriptors (in hex):
[12071.138217]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 
[12071.138230]         00 51 f2 6a 
[12071.138235] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed
[12071.138243] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 51 f2 68 00 00 08 00
[12071.138256] end_request: I/O error, dev sda, sector 5370474
[12071.138290] ata1: EH complete
[12073.754956] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12073.754962] ata1.00: BMDMA2 stat 0x82c0009
[12073.754968] ata1.00: failed command: READ DMA
[12073.754976] ata1.00: cmd c8/00:08:68:f2:51/00:00:00:00:00/e0 tag 0 dma 4096 in
[12073.754978]          res 51/40:00:6a:f2:51/00:00:00:00:00/e0 Emask 0x9 (media error)
[12073.754982] ata1.00: status: { DRDY ERR }
[12073.754985] ata1.00: error: { UNC }
[12073.776884] ata1.00: configured for UDMA/100
[12073.776918] ata1: EH complete
[12076.188400] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12076.188411] ata1.00: BMDMA2 stat 0x82c0009
[12076.188420] ata1.00: failed command: READ DMA
[12076.188437] ata1.00: cmd c8/00:08:68:f2:51/00:00:00:00:00/e0 tag 0 dma 4096 in
[12076.188440]          res 51/40:00:6a:f2:51/00:00:00:00:00/e0 Emask 0x9 (media error)
[12076.188449] ata1.00: status: { DRDY ERR }
[12076.188456] ata1.00: error: { UNC }
[12076.213312] ata1.00: configured for UDMA/100
[12076.213338] ata1: EH complete
[12078.621875] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12078.621887] ata1.00: BMDMA2 stat 0x82c0009
[12078.621896] ata1.00: failed command: READ DMA
[12078.621913] ata1.00: cmd c8/00:08:68:f2:51/00:00:00:00:00/e0 tag 0 dma 4096 in
[12078.621916]          res 51/40:00:6a:f2:51/00:00:00:00:00/e0 Emask 0x9 (media error)
[12078.621925] ata1.00: status: { DRDY ERR }
[12078.621931] ata1.00: error: { UNC }
[12078.644799] ata1.00: configured for UDMA/100
[12078.644828] ata1: EH complete
[12081.054299] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12081.054308] ata1.00: BMDMA2 stat 0x82c0009
[12081.054316] ata1.00: failed command: READ DMA
[12081.054328] ata1.00: cmd c8/00:08:68:f2:51/00:00:00:00:00/e0 tag 0 dma 4096 in
[12081.054331]          res 51/40:00:6a:f2:51/00:00:00:00:00/e0 Emask 0x9 (media error)
[12081.054338] ata1.00: status: { DRDY ERR }
[12081.054342] ata1.00: error: { UNC }
[12081.077225] ata1.00: configured for UDMA/100
[12081.077255] ata1: EH complete
[12083.487773] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12083.487785] ata1.00: BMDMA2 stat 0x82c0009
[12083.487795] ata1.00: failed command: READ DMA
[12083.487812] ata1.00: cmd c8/00:08:68:f2:51/00:00:00:00:00/e0 tag 0 dma 4096 in
[12083.487815]          res 51/40:00:6a:f2:51/00:00:00:00:00/e0 Emask 0x9 (media error)
[12083.487824] ata1.00: status: { DRDY ERR }
[12083.487830] ata1.00: error: { UNC }
[12083.508727] ata1.00: configured for UDMA/100
[12083.508757] ata1: EH complete
[12083.691281] ecryptfs_decrypt_page: Error attempting to read lower page; rc = [-4]
[12083.691292] ecryptfs_readpage: Error decrypting page; rc = [-4]
[12083.691351] ecryptfs_decrypt_page: Error attempting to read lower page; rc = [-4]
[12083.691355] ecryptfs_readpage: Error decrypting page; rc = [-4]
[12083.691360] ecryptfs_decrypt_page: Error attempting to read lower page; rc = [-4]
[12083.691364] ecryptfs_readpage: Error decrypting page; rc = [-4]
[12083.691369] ecryptfs_decrypt_page: Error attempting to read lower page; rc = [-4]
[12083.691372] ecryptfs_readpage: Error decrypting page; rc = [-4]
[12083.691377] ecryptfs_decrypt_page: Error attempting to read lower page; rc = [-4]
[12083.691380] ecryptfs_readpage: Error decrypting page; rc = [-4]
[12083.691387] ecryptfs_decrypt_page: Error attempting to read lower page; rc = [-4]
[12083.691390] ecryptfs_readpage: Error decrypting page; rc = [-4]
[12083.691398] ecryptfs_decrypt_page: Error attempting to read lower page; rc = [-4]
[12083.691401] ecryptfs_readpage: Error decrypting page; rc = [-4]
[12083.691407] ecryptfs_decrypt_page: Error attempting to read lower page; rc = [-4]
[12083.691410] ecryptfs_readpage: Error decrypting page; rc = [-4]
[12083.691415] ecryptfs_decrypt_page: Error attempting to read lower page; rc = [-4]
[12083.691418] ecryptfs_readpage: Error decrypting page; rc = [-4]
[12085.910205] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12085.910216] ata1.00: BMDMA2 stat 0x82c0009
[12085.910225] ata1.00: failed command: READ DMA
[12085.910242] ata1.00: cmd c8/00:08:68:f2:51/00:00:00:00:00/e0 tag 0 dma 4096 in
[12085.910246]          res 51/40:00:6a:f2:51/00:00:00:00:00/e0 Emask 0x9 (media error)
[12085.910255] ata1.00: status: { DRDY ERR }
[12085.910261] ata1.00: error: { UNC }
[12085.933105] ata1.00: configured for UDMA/100
[12085.933140] sd 0:0:0:0: [sda] Unhandled sense code
[12085.933146] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[12085.933156] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor]
[12085.933169] Descriptor sense data with sense descriptors (in hex):
[12085.933175]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 
[12085.933204]         00 51 f2 6a 
[12085.933216] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed
[12085.933231] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 51 f2 68 00 00 08 00
[12085.933257] end_request: I/O error, dev sda, sector 5370474
[12085.933307] ata1: EH complete
[12195.098976] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12195.098987] ata1.00: BMDMA2 stat 0x82c0009
[12195.098996] ata1.00: failed command: READ DMA
[12195.099013] ata1.00: cmd c8/00:08:f8:c8:51/00:00:00:00:00/e0 tag 0 dma 4096 in
[12195.099017]          res 51/40:00:fe:c8:51/00:00:00:00:00/e0 Emask 0x9 (media error)
[12195.099026] ata1.00: status: { DRDY ERR }
[12195.099032] ata1.00: error: { UNC }
[12195.120877] ata1.00: configured for UDMA/100
[12195.120905] ata1: EH complete
[12197.520380] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12197.520386] ata1.00: BMDMA2 stat 0x82c0009
[12197.520391] ata1.00: failed command: READ DMA
[12197.520400] ata1.00: cmd c8/00:08:f8:c8:51/00:00:00:00:00/e0 tag 0 dma 4096 in
[12197.520401]          res 51/40:00:fe:c8:51/00:00:00:00:00/e0 Emask 0x9 (media error)
[12197.520405] ata1.00: status: { DRDY ERR }
[12197.520408] ata1.00: error: { UNC }
[12197.545394] ata1.00: configured for UDMA/100
[12197.545427] ata1: EH complete
[12199.942842] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12199.942853] ata1.00: BMDMA2 stat 0x82c0009
[12199.942863] ata1.00: failed command: READ DMA
[12199.942879] ata1.00: cmd c8/00:08:f8:c8:51/00:00:00:00:00/e0 tag 0 dma 4096 in
[12199.942883]          res 51/40:00:fe:c8:51/00:00:00:00:00/e0 Emask 0x9 (media error)
[12199.942892] ata1.00: status: { DRDY ERR }
[12199.942898] ata1.00: error: { UNC }
[12199.964779] ata1.00: configured for UDMA/100
[12199.964810] ata1: EH complete
[12202.376280] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12202.376291] ata1.00: BMDMA2 stat 0x82c0009
[12202.376300] ata1.00: failed command: READ DMA
[12202.376317] ata1.00: cmd c8/00:08:f8:c8:51/00:00:00:00:00/e0 tag 0 dma 4096 in
[12202.376321]          res 51/40:00:fe:c8:51/00:00:00:00:00/e0 Emask 0x9 (media error)
[12202.376329] ata1.00: status: { DRDY ERR }
[12202.376336] ata1.00: error: { UNC }
[12202.401189] ata1.00: configured for UDMA/100
[12202.401217] ata1: EH complete
[12204.809720] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12204.809731] ata1.00: BMDMA2 stat 0x82c0009
[12204.809740] ata1.00: failed command: READ DMA
[12204.809757] ata1.00: cmd c8/00:08:f8:c8:51/00:00:00:00:00/e0 tag 0 dma 4096 in
[12204.809761]          res 51/40:00:fe:c8:51/00:00:00:00:00/e0 Emask 0x9 (media error)
[12204.809769] ata1.00: status: { DRDY ERR }
[12204.809776] ata1.00: error: { UNC }
[12204.832738] ata1.00: configured for UDMA/100
[12204.832769] ata1: EH complete
[12207.243167] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12207.243179] ata1.00: BMDMA2 stat 0x82c0009
[12207.243188] ata1.00: failed command: READ DMA
[12207.243205] ata1.00: cmd c8/00:08:f8:c8:51/00:00:00:00:00/e0 tag 0 dma 4096 in
[12207.243209]          res 51/40:00:fe:c8:51/00:00:00:00:00/e0 Emask 0x9 (media error)
[12207.243217] ata1.00: status: { DRDY ERR }
[12207.243224] ata1.00: error: { UNC }
[12207.265102] ata1.00: configured for UDMA/100
[12207.265135] sd 0:0:0:0: [sda] Unhandled sense code
[12207.265141] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[12207.265151] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor]
[12207.265163] Descriptor sense data with sense descriptors (in hex):
[12207.265170]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 
[12207.265198]         00 51 c8 fe 
[12207.265210] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed
[12207.265225] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 51 c8 f8 00 00 08 00
[12207.265251] end_request: I/O error, dev sda, sector 5359870
[12207.265299] ata1: EH complete
[12268.843117] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12268.843129] ata1.00: BMDMA2 stat 0x82c0009
[12268.843139] ata1.00: failed command: READ DMA
[12268.843156] ata1.00: cmd c8/00:08:f8:c8:51/00:00:00:00:00/e0 tag 0 dma 4096 in
[12268.843159]          res 51/40:00:fe:c8:51/00:00:00:00:00/e0 Emask 0x9 (media error)
[12268.843168] ata1.00: status: { DRDY ERR }
[12268.843174] ata1.00: error: { UNC }
[12268.865052] ata1.00: configured for UDMA/100
[12268.865085] ata1: EH complete
[12271.265524] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12271.265530] ata1.00: BMDMA2 stat 0x82c0009
[12271.265536] ata1.00: failed command: READ DMA
[12271.265544] ata1.00: cmd c8/00:08:f8:c8:51/00:00:00:00:00/e0 tag 0 dma 4096 in
[12271.265545]          res 51/40:00:fe:c8:51/00:00:00:00:00/e0 Emask 0x9 (media error)
[12271.265549] ata1.00: status: { DRDY ERR }
[12271.265552] ata1.00: error: { UNC }
[12271.293498] ata1.00: configured for UDMA/100
[12271.293528] ata1: EH complete
[12273.698973] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12273.698984] ata1.00: BMDMA2 stat 0x82c0009
[12273.698993] ata1.00: failed command: READ DMA
[12273.699010] ata1.00: cmd c8/00:08:f8:c8:51/00:00:00:00:00/e0 tag 0 dma 4096 in
[12273.699014]          res 51/40:00:fe:c8:51/00:00:00:00:00/e0 Emask 0x9 (media error)
[12273.699023] ata1.00: status: { DRDY ERR }
[12273.699029] ata1.00: error: { UNC }
[12273.720936] ata1.00: configured for UDMA/100
[12273.720965] ata1: EH complete
[12276.132428] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12276.132439] ata1.00: BMDMA2 stat 0x82c0009
[12276.132448] ata1.00: failed command: READ DMA
[12276.132465] ata1.00: cmd c8/00:08:f8:c8:51/00:00:00:00:00/e0 tag 0 dma 4096 in
[12276.132469]          res 51/40:00:fe:c8:51/00:00:00:00:00/e0 Emask 0x9 (media error)
[12276.132478] ata1.00: status: { DRDY ERR }
[12276.132484] ata1.00: error: { UNC }
[12276.157333] ata1.00: configured for UDMA/100
[12276.157357] ata1: EH complete
[12278.564889] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12278.564900] ata1.00: BMDMA2 stat 0x82c0009
[12278.564910] ata1.00: failed command: READ DMA
[12278.564927] ata1.00: cmd c8/00:08:f8:c8:51/00:00:00:00:00/e0 tag 0 dma 4096 in
[12278.564930]          res 51/40:00:fe:c8:51/00:00:00:00:00/e0 Emask 0x9 (media error)
[12278.564939] ata1.00: status: { DRDY ERR }
[12278.564945] ata1.00: error: { UNC }
[12278.588782] ata1.00: configured for UDMA/100
[12278.588811] ata1: EH complete
[12280.998334] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12280.998345] ata1.00: BMDMA2 stat 0x82c0009
[12280.998355] ata1.00: failed command: READ DMA
[12280.998372] ata1.00: cmd c8/00:08:f8:c8:51/00:00:00:00:00/e0 tag 0 dma 4096 in
[12280.998376]          res 51/40:00:fe:c8:51/00:00:00:00:00/e0 Emask 0x9 (media error)
[12280.998384] ata1.00: status: { DRDY ERR }
[12280.998390] ata1.00: error: { UNC }
[12281.021268] ata1.00: configured for UDMA/100
[12281.021300] sd 0:0:0:0: [sda] Unhandled sense code
[12281.021306] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[12281.021316] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor]
[12281.021329] Descriptor sense data with sense descriptors (in hex):
[12281.021335]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 
[12281.021363]         00 51 c8 fe 
[12281.021375] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed
[12281.021390] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 51 c8 f8 00 00 08 00
[12281.021416] end_request: I/O error, dev sda, sector 5359870
[12281.021464] ata1: EH complete
[12286.976342] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12286.976350] ata1.00: BMDMA2 stat 0x82c0009
[12286.976355] ata1.00: failed command: READ DMA
[12286.976363] ata1.00: cmd c8/00:08:f8:c8:51/00:00:00:00:00/e0 tag 0 dma 4096 in
[12286.976365]          res 51/40:00:fe:c8:51/00:00:00:00:00/e0 Emask 0x9 (media error)
[12286.976369] ata1.00: status: { DRDY ERR }
[12286.976372] ata1.00: error: { UNC }
[12286.994210] ata1.00: configured for UDMA/100
[12286.994244] ata1: EH complete
[12289.365743] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12289.365754] ata1.00: BMDMA2 stat 0x82c0009
[12289.365763] ata1.00: failed command: READ DMA
[12289.365780] ata1.00: cmd c8/00:08:f8:c8:51/00:00:00:00:00/e0 tag 0 dma 4096 in
[12289.365784]          res 51/40:00:fe:c8:51/00:00:00:00:00/e0 Emask 0x9 (media error)
[12289.365793] ata1.00: status: { DRDY ERR }
[12289.365799] ata1.00: error: { UNC }
[12289.389655] ata1.00: configured for UDMA/100
[12289.389685] ata1: EH complete
[12291.787190] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12291.787197] ata1.00: BMDMA2 stat 0x82c0009
[12291.787202] ata1.00: failed command: READ DMA
[12291.787211] ata1.00: cmd c8/00:08:f8:c8:51/00:00:00:00:00/e0 tag 0 dma 4096 in
[12291.787212]          res 51/40:00:fe:c8:51/00:00:00:00:00/e0 Emask 0x9 (media error)
[12291.787216] ata1.00: status: { DRDY ERR }
[12291.787219] ata1.00: error: { UNC }
[12291.810106] ata1.00: configured for UDMA/100
[12291.810138] ata1: EH complete
[12294.209582] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12294.209590] ata1.00: BMDMA2 stat 0x82c0009
[12294.209595] ata1.00: failed command: READ DMA
[12294.209604] ata1.00: cmd c8/00:08:f8:c8:51/00:00:00:00:00/e0 tag 0 dma 4096 in
[12294.209605]          res 51/40:00:fe:c8:51/00:00:00:00:00/e0 Emask 0x9 (media error)
[12294.209609] ata1.00: status: { DRDY ERR }
[12294.209613] ata1.00: error: { UNC }
[12294.237590] ata1.00: configured for UDMA/100
[12294.237625] ata1: EH complete
[12296.643078] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12296.643085] ata1.00: BMDMA2 stat 0x82c0009
[12296.643090] ata1.00: failed command: READ DMA
[12296.643098] ata1.00: cmd c8/00:08:f8:c8:51/00:00:00:00:00/e0 tag 0 dma 4096 in
[12296.643100]          res 51/40:00:fe:c8:51/00:00:00:00:00/e0 Emask 0x9 (media error)
[12296.643104] ata1.00: status: { DRDY ERR }
[12296.643107] ata1.00: error: { UNC }
[12296.669014] ata1.00: configured for UDMA/100
[12296.669053] ata1: EH complete
[12299.076516] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12299.076526] ata1.00: BMDMA2 stat 0x82c0009
[12299.076533] ata1.00: failed command: READ DMA
[12299.076546] ata1.00: cmd c8/00:08:f8:c8:51/00:00:00:00:00/e0 tag 0 dma 4096 in
[12299.076549]          res 51/40:00:fe:c8:51/00:00:00:00:00/e0 Emask 0x9 (media error)
[12299.076555] ata1.00: status: { DRDY ERR }
[12299.076560] ata1.00: error: { UNC }
[12299.098399] ata1.00: configured for UDMA/100
[12299.098429] sd 0:0:0:0: [sda] Unhandled sense code
[12299.098432] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[12299.098437] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor]
[12299.098444] Descriptor sense data with sense descriptors (in hex):
[12299.098447]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 
[12299.098460]         00 51 c8 fe 
[12299.098466] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed
[12299.098473] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 51 c8 f8 00 00 08 00
[12299.098486] end_request: I/O error, dev sda, sector 5359870
[12299.098532] ata1: EH complete
cab@cab-laptop:~$ 

[Laycastle]

Non ci vedo nulla relativo a vboxdrv o ad un caricamento di un modulo. :-\
Se dai

Codice: Seleziona tutto

sudo modprobe vboxdrv

di che si lagna?

[spoonriver]

bofonchia sta roba :

Codice: Seleziona tutto

cab@cab-laptop:~$ sudo modprobe vboxdrv
[sudo] password for cab: 
FATAL: Module vboxdrv not found.

[Freddy85]

Codice: Seleziona tutto

sudo /etc/init.d/vboxdrv setup

prova così

[spoonriver]

L'ho scritto sopra

mi dice

Codice: Seleziona tutto

cab@cab-laptop:~$ sudo /etc/init.d/vboxdrv setup
 * Stopping VirtualBox kernel modules                                    [ OK ] 
 * Uninstalling old VirtualBox DKMS kernel modules                       [ OK ] 
 * Trying to register the VirtualBox kernel modules using DKMS           [ OK ] 
 * Starting VirtualBox kernel modules                                           
 * modprobe vboxdrv failed. Please use 'dmesg' to find out why
cab@cab-laptop:~$ 

[Laycastle]

Codice: Seleziona tutto

sudo /etc/init.d/vboxdrv setup

prova così

L'ha appena fatto.

bofonchia sta roba :

Codice: Seleziona tutto

cab@cab-laptop:~$ sudo modprobe vboxdrv
[sudo] password for cab: 
FATAL: Module vboxdrv not found.

Mi sa che ci serve dmesg. Per sicurezza ridai

Codice: Seleziona tutto

udo /etc/init.d/vboxdrv setup

poi

Codice: Seleziona tutto

dmesg > dmesg.log

ti troverai un file dmesg.log nella home allegalo o copialo su pastebin.

[Freddy85]

avete ragione, scusate
io ho trovato questo sul forum ed hanno risolto:
http://forum.ubuntu-it.org/viewtopic.php?t=497697msg3887130

[spoonriver]

intanto allego il file di log, dopo cena mi leggo il resto.
Grazie mille ragazzi intanto

[spoonriver]

Aggiorno con qualche comando che forse puo' essere utile:

sudo dkms status

Codice: Seleziona tutto

cab@cab-laptop:~$ sudo dkms status
vboxhost, 4.1.8, 2.6.32-39-generic, i686: installed 
cab@cab-laptop:~$

sudo  dpkg -l | grep linux-headers

Codice: Seleziona tutto

cab@cab-laptop:~$ sudo  dpkg -l | grep linux-headers
ii  linux-headers-2.6.32-37                            2.6.32-37.81                                    Header files related to Linux kernel version
ii  linux-headers-2.6.32-37-generic                    2.6.32-37.81                                    Linux kernel headers for version 2.6.32 on x
ii  linux-headers-2.6.32-38                            2.6.32-38.83                                    Header files related to Linux kernel version
ii  linux-headers-2.6.32-38-generic                    2.6.32-38.83                                    Linux kernel headers for version 2.6.32 on x
ii  linux-headers-2.6.32-39                            2.6.32-39.86                                    Header files related to Linux kernel version
ii  linux-headers-2.6.32-39-generic                    2.6.32-39.86                                    Linux kernel headers for version 2.6.32 on x
ii  linux-headers-generic                              2.6.32.39.46                                    Generic Linux kernel headers
cab@cab-laptop:~$ 

tenete presente che sono ignoratissimo, per me è semi-arabo ^^'

[Laycastle]

dkms non lo conosco affatto, temo di non poter esser ulteriormente d'auito.

[spoonriver]

l'ho inserito solo perchè ho visto che Virtualbox ne fa uso a volte...  :-\

io pensavo che il problema potesse essere che gli headers (qualsiasi cosa siano) di Virtualbox non corrispondono al kernel che utilizzo... tralasciando il mio linguaggio barbaro c' è modo di verificare questa cosa , se non è campata in aria?

[spoonriver]

(editato il titolo per un messaggio più specifico )

in un forum debian ho trovato un messaggio di cui riporto parte

"To compile a module with DKMS , you need to install the following (and probably missing ones for those who got the errors displayed above ) Debian packages :

root@localhost:~# apt-get install linux-image-2.6.32-bpo.5-686 linux-headers-2.6.32-bpo.5-686

These packages contains the source code and the corresponding headers files for the current running kernel. Once installed, relaunch your installation :"

ora, se volessi fare la stessa cosa per il mio kernel ( Kernel Linux 2.6.32-39-generic) cosa devo fare?

[spoonriver]

ultimo aggiornamento / up , non so più che pesci pigliare da solo ...

ho eseguito

sudo apt-get install linux-headers-2.6.32-39-generic-pae

e poi di nuovo:
sudo apt-get install --reinstall virtualbox

come dal topic http://forum.ubuntu-it.org/index.php/topic,459568.0/

ho letto la guida di muflone http://forum.ubuntu-it.org/index.php/topic,413400 ma non trovo nulla...

ad oggi la situazione è :

Codice: Seleziona tutto

cab@cab-laptop:~$ virtualbox 
WARNING: The vboxdrv kernel module is not loaded. Either there is no module
         available for the current kernel (2.6.32-39-generic) or it failed to
         load. Please recompile the kernel module and install it by

           sudo /etc/init.d/vboxdrv setup

         You will not be able to start VMs until this problem is fixed.


Signal 7 (BUS) caught by ps (procps version 3.2.8).
Please send bug reports to <feedback@lists.sf.net> or <albert@users.sf.net>
cab@cab-laptop:~$ sudo /etc/init.d/vboxdrv setup
[sudo] password for cab: 
 * Stopping VirtualBox kernel modules                                    [ OK ] 
 * Uninstalling old VirtualBox DKMS kernel modules                       [ OK ] 
 * Trying to register the VirtualBox kernel modules using DKMS           [ OK ] 
 * Starting VirtualBox kernel modules                                           
 * modprobe vboxdrv failed. Please use 'dmesg' to find out why
cab@cab-laptop:~$ 

il file dmesg è allegato qualche topic più in su 

[Freddy85]

proviamo così:

Codice: Seleziona tutto

sudo apt-get install linux-headers-`uname -r`

[spoonriver]

proviamo così:

Codice: Seleziona tutto

sudo apt-get install linux-headers-`uname -r`

eccolo

Codice: Seleziona tutto

cab@cab-laptop:~$ sudo apt-get install linux-headers-`uname -r`
[sudo] password for cab: 
Lettura elenco dei pacchetti... Fatto
Generazione albero delle dipendenze       
Lettura informazioni sullo stato... Fatto
linux-headers-2.6.32-39-generic è già alla versione più recente.
0 aggiornati, 0 installati, 0 da rimuovere e 1 non aggiornati.
cab@cab-laptop:~$