Scheda di rete broadcom 4313

[shalom]

Santa giornata a tutti. Mio sono stancato di avere lo stesso problema. puntualmente ubuntu 11.10 e 12.04, con l'utilizzo del wifi con scheda di rete broadcom 4313, si blocca, esiste una soluzione per onde evitare di dover passare a windows? Alleluja!

[magozurlinux]

Da terminale dai questi comandi:

Codice: Seleziona tutto

echo blacklist brcmsmac | sudo tee -a /etc/modprobe.d/blacklist.conf

Codice: Seleziona tutto

echo blacklist bcma | sudo tee -a /etc/modprobe.d/blacklist.conf

Codice: Seleziona tutto

echo wl | sudo tee -a /etc/modules

Riavvia il pc.

[shalom]

Grazie del consiglio ma non c'è speranza, tutto come prima...

[magozurlinux]

Da terminale postami questi comandi:

Codice: Seleziona tutto

lspci -nn | grep -i net

Codice: Seleziona tutto

dmesg | grep wl

Codice: Seleziona tutto

sudo lshw -C network

Codice: Seleziona tutto

rfkill list

[Jack Daniels]

Da terminale dai questi comandi:

Codice: Seleziona tutto

echo blacklist brcmsmac | sudo tee -a /etc/modprobe.d/blacklist.conf

Codice: Seleziona tutto

echo blacklist bcma | sudo tee -a /etc/modprobe.d/blacklist.conf

Codice: Seleziona tutto

echo wl | sudo tee -a /etc/modules

Riavvia il pc.

Credo che il problema sia l'inverso. Ubuntu installa automaticamente i driver proprietari Broadcom STA.
Ho un'angheria uguale su un pc di un mio amico che soffre di blocchi e stalti di rete per il driver Broadcom PROPRIETARIO.

Sarebbe cosa saggia disinstallarlo e utilizzare l'ottimo driver open

[shalom]

Ho dato da terminale i comandi che mi hai detto e disinstallato i driver proprietari, solo che ora non rile va più la scheda di rete.

[Jack Daniels]

Dai da terminale

Codice: Seleziona tutto

sudo modprobe b43 ssb

vedi se funonzia

P.S. quella era una citazione

[shalom]

Ho dato il comando, riavviato ma non funziona.

[Jack Daniels]

Ho dato il comando, riavviato ma non funziona.

Ok era per provare. (b43 evidentemente non è il modulo per la scheda in uso)
Questo significa che devi andare a togliere dalla lista nera i moduli precedentemente inseriti.
Apri il terminale e dai

Codice: Seleziona tutto

sudo gedit /etc/modprobe.d/blacklist.conf

vai a trovare tra le varie righe una che contenga le parole brcmsmac e bcma.
Come le trovi metti un cancelletto "#" all'inizio della della riga che li contiene (per commentarla).
salva il file

Poi sempre da terminale

Codice: Seleziona tutto

echo blacklist wl | sudo tee -a /etc/modprobe.d/blacklist.conf

poi riavvia.
in caso non partisse la scheda prova a caricarli a mano da terminale

Codice: Seleziona tutto

sudo modprobe brcmsmac bcma

in caso di errori posta i risultati

P.S. Magozurlinux non voglio minimamente contraddirti ma i driver proprietari creano rogne sul pc che ho sotto mano in caso negativo abbiamo sfatato un mito

[shalom]

Funziona ma si blocca

[magozurlinux]

Da terminale postami questi comandi:

Codice: Seleziona tutto

lspci -nn | grep -i net

Codice: Seleziona tutto

sudo lshw -C network

Codice: Seleziona tutto

rfkill list

questi comandi non l'hai postati!

[shalom]

Codice: Seleziona tutto

lspci -nn | grep -i net

06:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8152 v2.0 Fast Ethernet [1969:2062] (rev c1)
07:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01)

Codice: Seleziona tutto

sudo lshw -C network

*-network
description: Ethernet interface
product: AR8152 v2.0 Fast Ethernet
vendor: Atheros Communications Inc.
physical id: 0
bus info: pci@0000:06:00.0
logical name: eth0
version: c1
serial: b8:70:f4:e9:3c:91
size: 10Mbit/s
capacity: 100Mbit/s
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI duplex=half firmware=N/A ip=192.168.1.33 latency=0 link=yes multicast=yes port=twisted pair speed=10Mbit/s
resources: irq:40 memory:90200000-9023ffff ioport:2000(size=128)
*-network
description: Wireless interface
product: BCM4313 802.11b/g/n Wireless LAN Controller
vendor: Broadcom Corporation
physical id: 0
bus info: pci@0000:07:00.0
logical name: wlan0
version: 01
serial: 60:d8:19:0e:b5:84
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=brcmsmac driverversion=3.2.0-24-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn
resources: irq:19 memory:90100000-90103fff

Codice: Seleziona tutto

rfkill list

0: acer-wireless: Wireless LAN
Soft blocked: no
Hard blocked: no
1: acer-bluetooth: Bluetooth
Soft blocked: no
Hard blocked: no
2: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no

[giulux]

con più di 600 post alle spalle dovresti aver ormai imparato a postare i listati in modo corretto! .
modifica il tuo post evidenziando il listati e usando il tasto Code sopra la finestra di scrittura
grazie

[Jack Daniels]

....... Si blocca anche con driver open ???
Ma cosa intendi precisamente con il termine "blocca" ? il pc o la sola connessione?

Correggi gli output sono un casino postati così senza un minimo di ordine
P.S. Se è il PC a bloccarsi credo che bisognerà fare un lavoro a monte perchè la scheda wireless non centra un tubo........

[shalom]

Si blocca il pc e devo riavviarlo in modo forzato.

[giulux]

i listati devono essere tra i tag non dopo, come hai fatto adesso e cioè il modo giusto è : [ code] listato da inserire[ /code]
per ottenere ciò si usa il pulsante Code o cliccandolo prima e poi inserendo la copia tra i tag come detto sopra, oppure evidenziando col mouse tutto quello da inserire tra i tag e poi cliccando il tasto.
vedi che puoi fare

[Jack Daniels]

Solo usando la scheda wireless si blocca ?
Lavorando a scheda spenta cosa fa?

Provoca dinuovo il freeze e vai in tty1

guarda con top cosu usa molta cpu

Codice: Seleziona tutto

sudo top

poi riavvia e posta

Codice: Seleziona tutto

cat /var/log/Xorg.0.log

Codice: Seleziona tutto

cat /var/log/dmesg

P.S. mi raccomando di usare il tasto LIST altrimenti riempi tutta la pagina con gli output
Seleziona l'intero output e poi premi il pulsante list

[shalom]

Codice: Seleziona tutto

cat /var/log/Xorg.0.log

Codice: Seleziona tutto

ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
	ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
	ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
	ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
	ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
	ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
	ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
	ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
	ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
	ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
	ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
	ATI Mobility Radeon X1700, ATI Radeon X2300HD,
	ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
	ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
	ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
	ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
	ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
	ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
	ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
	ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
	ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
	ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
	ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
	ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
	ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
	ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
	ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
	ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
	AMD FireStream 9250, ATI FirePro V8700 (FireGL),
	ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
	ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
	ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
	ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
	ATI Mobility Radeon HD 4670, ATI FirePro M5750,
	ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
	ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
	ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
	ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
	ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
	ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
	ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
	ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
	ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
	ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
	ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
	ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
	ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
	ATI Mobility Radeon HD 3850 X2, ATI RV670,
	ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
	ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
	ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
	ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
	ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
	ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
	ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
	ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
	ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
	ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
	ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
	ATI FireGL V3600, ATI Radeon HD 2600 LE,
	ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
	ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
	ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
	ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
	ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
	ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
	ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
	ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
	ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
	ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
	ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
	ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
	ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
	SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
	ATI Radeon 4100, ATI Mobility Radeon HD 4200,
	ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
	AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
	AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
	AMD Radeon HD 6300 Series Graphics,
	AMD Radeon HD 6200 Series Graphics, PALM, PALM, CYPRESS,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
	AMD Firestream 9350, ATI Radeon HD 5800 Series,
	ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
	ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
	ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
	ATI Mobility Radeon HD 5800 Series,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
	ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
	ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
	ATI Mobility Radeon HD 5000 Series,
	ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
	ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
	ATI Mobility Radeon HD 5000 Series,
	ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
	ATI Mobility Radeon Graphics, CEDAR,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
	ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
	CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
	AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
	CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
	BARTS, BARTS, Mobility Radeon HD 6000 Series,
	Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
	AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
	AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
	TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
	TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
	CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
	CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS
[    21.960] (II) VESA: driver for VESA chipsets: vesa
[    21.960] (II) FBDEV: driver for framebuffer: fbdev
[    21.960] (++) using VT number 7

[    21.960] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[    21.960] (II) [KMS] Kernel modesetting enabled.
[    21.960] (WW) Falling back to old probe method for vesa
[    21.960] (WW) Falling back to old probe method for fbdev
[    21.961] (II) Loading sub module "fbdevhw"
[    21.961] (II) LoadModule: "fbdevhw"
[    21.961] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    21.962] (II) Module fbdevhw: vendor="X.Org Foundation"
[    21.962] 	compiled for 1.11.3, module version = 0.0.2
[    21.962] 	ABI class: X.Org Video Driver, version 11.0
[    21.962] (II) RADEON(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    21.962] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[    21.962] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    21.962] (==) RADEON(0): Default visual is TrueColor
[    21.962] (==) RADEON(0): RGB weight 888
[    21.962] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[    21.962] (--) RADEON(0): Chipset: "AMD Radeon HD 6200 Series Graphics" (ChipID = 0x9807)
[    21.962] (II) RADEON(0): PCIE card detected
[    21.963] drmOpenDevice: node name is /dev/dri/card0
[    21.963] drmOpenDevice: open result is 9, (OK)
[    21.963] drmOpenByBusid: Searching for BusID pci:0000:00:01.0
[    21.963] drmOpenDevice: node name is /dev/dri/card0
[    21.963] drmOpenDevice: open result is 9, (OK)
[    21.963] drmOpenByBusid: drmOpenMinor returns 9
[    21.963] drmOpenByBusid: drmGetBusid reports pci:0000:00:01.0
[    21.963] (II) Loading sub module "exa"
[    21.963] (II) LoadModule: "exa"
[    21.963] (II) Loading /usr/lib/xorg/modules/libexa.so
[    21.964] (II) Module exa: vendor="X.Org Foundation"
[    21.964] 	compiled for 1.11.3, module version = 2.5.0
[    21.964] 	ABI class: X.Org Video Driver, version 11.0
[    21.964] (II) RADEON(0): KMS Color Tiling: enabled
[    21.964] (II) RADEON(0): KMS Pageflipping: enabled
[    21.964] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[    21.964] (II) RADEON(0): Output LVDS has no monitor section
[    21.968] (II) RADEON(0): Output HDMI-0 has no monitor section
[    21.992] (II) RADEON(0): Output VGA-0 has no monitor section
[    21.992] (II) RADEON(0): EDID for output LVDS
[    21.992] (II) RADEON(0): Manufacturer: AUO  Model: 2052  Serial#: 0
[    21.992] (II) RADEON(0): Year: 2009  Week: 1
[    21.992] (II) RADEON(0): EDID Version: 1.3
[    21.992] (II) RADEON(0): Digital Display Input
[    21.992] (II) RADEON(0): Max Image Size [cm]: horiz.: 26  vert.: 14
[    21.992] (II) RADEON(0): Gamma: 2.20
[    21.992] (II) RADEON(0): No DPMS capabilities specified
[    21.992] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    21.993] (II) RADEON(0): First detailed timing is preferred mode
[    21.993] (II) RADEON(0): redX: 0.590 redY: 0.342   greenX: 0.334 greenY: 0.589
[    21.993] (II) RADEON(0): blueX: 0.161 blueY: 0.131   whiteX: 0.313 whiteY: 0.329
[    21.993] (II) RADEON(0): Manufacturer's mask: 0
[    21.993] (II) RADEON(0): Supported detailed timing:
[    21.993] (II) RADEON(0): clock: 52.0 MHz   Image Size:  256 x 144 mm
[    21.993] (II) RADEON(0): h_active: 1024  h_sync: 1072  h_sync_end 1104 h_blank_end 1356 h_border: 0
[    21.993] (II) RADEON(0): v_active: 600  v_sync: 603  v_sync_end 609 v_blanking: 638 v_border: 0
[    21.993] (II) RADEON(0): Unknown vendor-specific block f
[    21.993] (II) RADEON(0):  AUO
[    21.993] (II) RADEON(0):  B116AW02 V0
[    21.993] (II) RADEON(0): EDID (in hex):
[    21.993] (II) RADEON(0): 	00ffffffffffff0006af522000000000
[    21.993] (II) RADEON(0): 	01130103801a0e780a2b659757559629
[    21.993] (II) RADEON(0): 	21505400000001010101010101010101
[    21.993] (II) RADEON(0): 	0101010101014b14004c415826203020
[    21.993] (II) RADEON(0): 	36000090100000180000000f00000000
[    21.993] (II) RADEON(0): 	00000000000000000020000000fe0041
[    21.993] (II) RADEON(0): 	554f0a202020202020202020000000fe
[    21.993] (II) RADEON(0): 	004231313641573032205630200a0090
[    21.993] (II) RADEON(0): EDID vendor "AUO", prod id 8274
[    21.993] (II) RADEON(0): Printing DDC gathered Modelines:
[    21.993] (II) RADEON(0): Modeline "1024x600"x0.0   51.95  1024 1072 1104 1356  600 603 609 638 -hsync -vsync (38.3 kHz)
[    21.993] (II) RADEON(0): Printing probed modes for output LVDS
[    21.993] (II) RADEON(0): Modeline "1024x600"x60.0   51.95  1024 1072 1104 1356  600 603 609 638 -hsync -vsync (38.3 kHz)
[    21.993] (II) RADEON(0): Modeline "800x600"x59.9   38.25  800 832 912 1024  600 603 607 624 -hsync +vsync (37.4 kHz)
[    21.993] (II) RADEON(0): Modeline "848x480"x59.7   31.50  848 872 952 1056  480 483 493 500 -hsync +vsync (29.8 kHz)
[    21.993] (II) RADEON(0): Modeline "720x480"x59.7   26.75  720 744 808 896  480 483 493 500 -hsync +vsync (29.9 kHz)
[    21.993] (II) RADEON(0): Modeline "640x480"x59.4   23.75  640 664 720 800  480 483 487 500 -hsync +vsync (29.7 kHz)
[    21.998] (II) RADEON(0): EDID for output HDMI-0
[    22.024] (II) RADEON(0): EDID for output VGA-0
[    22.024] (II) RADEON(0): Output LVDS connected
[    22.025] (II) RADEON(0): Output HDMI-0 disconnected
[    22.025] (II) RADEON(0): Output VGA-0 disconnected
[    22.025] (II) RADEON(0): Using exact sizes for initial modes
[    22.025] (II) RADEON(0): Output LVDS using initial mode 1024x600
[    22.025] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    22.025] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:10000000 visible:fd68000
[    22.025] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[    22.025] (**) RADEON(0): Display dimensions: (260, 140) mm
[    22.025] (**) RADEON(0): DPI set to (100, 108)
[    22.025] (II) Loading sub module "fb"
[    22.025] (II) LoadModule: "fb"
[    22.025] (II) Loading /usr/lib/xorg/modules/libfb.so
[    22.026] (II) Module fb: vendor="X.Org Foundation"
[    22.026] 	compiled for 1.11.3, module version = 1.0.0
[    22.026] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    22.026] (II) Loading sub module "ramdac"
[    22.026] (II) LoadModule: "ramdac"
[    22.026] (II) Module "ramdac" already built-in
[    22.026] (II) UnloadModule: "vesa"
[    22.026] (II) Unloading vesa
[    22.026] (II) UnloadModule: "fbdev"
[    22.026] (II) Unloading fbdev
[    22.026] (II) UnloadModule: "fbdevhw"
[    22.026] (II) Unloading fbdevhw
[    22.026] (--) Depth 24 pixmap format is 32 bpp
[    22.026] (II) RADEON(0): [DRI2] Setup complete
[    22.026] (II) RADEON(0): [DRI2]   DRI driver: r600
[    22.026] (II) RADEON(0): [DRI2]   VDPAU driver: r600
[    22.027] (II) RADEON(0): Front buffer size: 2400K
[    22.027] (II) RADEON(0): VRAM usage limit set to 231379K
[    22.027] (==) RADEON(0): Backing store disabled
[    22.027] (II) RADEON(0): Direct rendering enabled
[    22.027] (II) RADEON(0): Setting EXA maxPitchBytes
[    22.027] (II) EXA(0): Driver allocated offscreen pixmaps
[    22.027] (II) EXA(0): Driver registered support for the following operations:
[    22.027] (II)         Solid
[    22.027] (II)         Copy
[    22.027] (II)         Composite (RENDER acceleration)
[    22.027] (II)         UploadToScreen
[    22.027] (II)         DownloadFromScreen
[    22.027] (II) RADEON(0): Acceleration enabled
[    22.027] (==) RADEON(0): DPMS enabled
[    22.027] (==) RADEON(0): Silken mouse enabled
[    22.027] (II) RADEON(0): Set up textured video
[    22.028] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[    22.028] (II) RADEON(0): [XvMC] Extension initialized.
[    22.028] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    22.028] (--) RandR disabled
[    22.028] (II) Initializing built-in extension Generic Event Extension
[    22.028] (II) Initializing built-in extension SHAPE
[    22.028] (II) Initializing built-in extension MIT-SHM
[    22.028] (II) Initializing built-in extension XInputExtension
[    22.028] (II) Initializing built-in extension XTEST
[    22.028] (II) Initializing built-in extension BIG-REQUESTS
[    22.028] (II) Initializing built-in extension SYNC
[    22.028] (II) Initializing built-in extension XKEYBOARD
[    22.028] (II) Initializing built-in extension XC-MISC
[    22.028] (II) Initializing built-in extension SECURITY
[    22.028] (II) Initializing built-in extension XINERAMA
[    22.028] (II) Initializing built-in extension XFIXES
[    22.028] (II) Initializing built-in extension RENDER
[    22.029] (II) Initializing built-in extension RANDR
[    22.029] (II) Initializing built-in extension COMPOSITE
[    22.029] (II) Initializing built-in extension DAMAGE
[    22.083] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    22.083] (II) AIGLX: enabled GLX_INTEL_swap_event
[    22.083] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    22.083] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    22.084] (II) AIGLX: Loaded and initialized r600
[    22.084] (II) GLX: Initialized DRI2 GL provider for screen 0
[    22.086] (II) RADEON(0): Setting screen physical size to 270 x 158
[    22.109] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    22.116] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    22.116] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    22.116] (II) LoadModule: "evdev"
[    22.116] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    22.117] (II) Module evdev: vendor="X.Org Foundation"
[    22.117] 	compiled for 1.11.3, module version = 2.7.0
[    22.117] 	Module class: X.Org XInput Driver
[    22.117] 	ABI class: X.Org XInput driver, version 16.0
[    22.117] (II) Using input driver 'evdev' for 'Power Button'
[    22.117] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    22.117] (**) Power Button: always reports core events
[    22.117] (**) evdev: Power Button: Device: "/dev/input/event3"
[    22.117] (--) evdev: Power Button: Vendor 0 Product 0x1
[    22.117] (--) evdev: Power Button: Found keys
[    22.117] (II) evdev: Power Button: Configuring as keyboard
[    22.117] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    22.117] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    22.117] (**) Option "xkb_rules" "evdev"
[    22.117] (**) Option "xkb_model" "pc105"
[    22.117] (**) Option "xkb_layout" "it"
[    22.122] (II) XKB: reuse xkmfile /var/lib/xkb/server-3781FECB9CB8D26EE03343DB2C93394EA704B98F.xkm
[    22.125] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[    22.125] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    22.125] (II) Using input driver 'evdev' for 'Video Bus'
[    22.125] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    22.125] (**) Video Bus: always reports core events
[    22.125] (**) evdev: Video Bus: Device: "/dev/input/event5"
[    22.125] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    22.125] (--) evdev: Video Bus: Found keys
[    22.125] (II) evdev: Video Bus: Configuring as keyboard
[    22.125] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5/event5"
[    22.125] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    22.125] (**) Option "xkb_rules" "evdev"
[    22.125] (**) Option "xkb_model" "pc105"
[    22.125] (**) Option "xkb_layout" "it"
[    22.127] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    22.127] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    22.127] (II) Using input driver 'evdev' for 'Power Button'
[    22.127] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    22.127] (**) Power Button: always reports core events
[    22.127] (**) evdev: Power Button: Device: "/dev/input/event0"
[    22.127] (--) evdev: Power Button: Vendor 0 Product 0x1
[    22.127] (--) evdev: Power Button: Found keys
[    22.127] (II) evdev: Power Button: Configuring as keyboard
[    22.127] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[    22.127] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    22.127] (**) Option "xkb_rules" "evdev"
[    22.127] (**) Option "xkb_model" "pc105"
[    22.127] (**) Option "xkb_layout" "it"
[    22.129] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[    22.129] (II) No input driver specified, ignoring this device.
[    22.129] (II) This device may have been added with another device file.
[    22.129] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[    22.129] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    22.129] (II) Using input driver 'evdev' for 'Sleep Button'
[    22.129] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    22.129] (**) Sleep Button: always reports core events
[    22.129] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[    22.130] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    22.130] (--) evdev: Sleep Button: Found keys
[    22.130] (II) evdev: Sleep Button: Configuring as keyboard
[    22.130] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1"
[    22.130] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    22.130] (**) Option "xkb_rules" "evdev"
[    22.130] (**) Option "xkb_model" "pc105"
[    22.130] (**) Option "xkb_layout" "it"
[    22.131] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event8)
[    22.131] (II) No input driver specified, ignoring this device.
[    22.131] (II) This device may have been added with another device file.
[    22.132] (II) config/udev: Adding input device WebCam (/dev/input/event7)
[    22.132] (**) WebCam: Applying InputClass "evdev keyboard catchall"
[    22.132] (II) Using input driver 'evdev' for 'WebCam'
[    22.132] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    22.132] (**) WebCam: always reports core events
[    22.132] (**) evdev: WebCam: Device: "/dev/input/event7"
[    22.132] (--) evdev: WebCam: Vendor 0x64e Product 0xd214
[    22.132] (--) evdev: WebCam: Found keys
[    22.132] (II) evdev: WebCam: Configuring as keyboard
[    22.133] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1:1.0/input/input7/event7"
[    22.133] (II) XINPUT: Adding extended input device "WebCam" (type: KEYBOARD, id 10)
[    22.133] (**) Option "xkb_rules" "evdev"
[    22.133] (**) Option "xkb_model" "pc105"
[    22.133] (**) Option "xkb_layout" "it"
[    22.134] (II) config/udev: Adding input device HDA ATI SB Mic (/dev/input/event10)
[    22.134] (II) No input driver specified, ignoring this device.
[    22.134] (II) This device may have been added with another device file.
[    22.135] (II) config/udev: Adding input device HDA ATI SB Headphone (/dev/input/event11)
[    22.135] (II) No input driver specified, ignoring this device.
[    22.135] (II) This device may have been added with another device file.
[    22.135] (II) config/udev: Adding input device HDA ATI SB Mic (/dev/input/event9)
[    22.135] (II) No input driver specified, ignoring this device.
[    22.135] (II) This device may have been added with another device file.
[    22.136] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[    22.136] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    22.136] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    22.136] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    22.136] (**) AT Translated Set 2 keyboard: always reports core events
[    22.136] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[    22.137] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    22.137] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    22.137] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    22.137] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[    22.137] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[    22.137] (**) Option "xkb_rules" "evdev"
[    22.137] (**) Option "xkb_model" "pc105"
[    22.137] (**) Option "xkb_layout" "it"
[    22.143] (II) config/udev: Adding input device Acer WMI hotkeys (/dev/input/event6)
[    22.143] (**) Acer WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    22.143] (II) Using input driver 'evdev' for 'Acer WMI hotkeys'
[    22.143] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    22.143] (**) Acer WMI hotkeys: always reports core events
[    22.143] (**) evdev: Acer WMI hotkeys: Device: "/dev/input/event6"
[    22.143] (--) evdev: Acer WMI hotkeys: Vendor 0 Product 0
[    22.143] (--) evdev: Acer WMI hotkeys: Found keys
[    22.143] (II) evdev: Acer WMI hotkeys: Configuring as keyboard
[    22.143] (**) Option "config_info" "udev:/sys/devices/virtual/input/input6/event6"
[    22.143] (II) XINPUT: Adding extended input device "Acer WMI hotkeys" (type: KEYBOARD, id 12)
[    22.143] (**) Option "xkb_rules" "evdev"
[    22.143] (**) Option "xkb_model" "pc105"
[    22.143] (**) Option "xkb_layout" "it"
[    22.708] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event12)
[    22.709] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[    22.709] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[    22.709] (II) LoadModule: "synaptics"
[    22.709] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    22.710] (II) Module synaptics: vendor="X.Org Foundation"
[    22.710] 	compiled for 1.11.3, module version = 1.5.99
[    22.710] 	Module class: X.Org XInput Driver
[    22.710] 	ABI class: X.Org XInput driver, version 16.0
[    22.710] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[    22.710] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    22.710] (**) ETPS/2 Elantech Touchpad: always reports core events
[    22.710] (**) Option "Device" "/dev/input/event12"
[    22.764] (II) synaptics: ETPS/2 Elantech Touchpad: ignoring touch events for semi-multitouch device
[    22.764] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 1408
[    22.764] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 640
[    22.764] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[    22.764] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[    22.764] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
[    22.764] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[    22.765] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    22.765] (**) ETPS/2 Elantech Touchpad: always reports core events
[    22.771] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input12/event12"
[    22.771] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 13)
[    22.771] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[    22.771] (**) synaptics: ETPS/2 Elantech Touchpad: MaxSpeed is now 1.75
[    22.771] (**) synaptics: ETPS/2 Elantech Touchpad: AccelFactor is now 0.129
[    22.772] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[    22.772] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[    22.772] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[    22.772] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[    22.772] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    22.773] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[    22.773] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[    23.141] (II) RADEON(0): EDID vendor "AUO", prod id 8274
[    23.142] (II) RADEON(0): Printing DDC gathered Modelines:
[    23.142] (II) RADEON(0): Modeline "1024x600"x0.0   51.95  1024 1072 1104 1356  600 603 609 638 -hsync -vsync (38.3 kHz)
[    28.672] (II) RADEON(0): EDID vendor "AUO", prod id 8274
[    28.672] (II) RADEON(0): Printing DDC gathered Modelines:
[    28.672] (II) RADEON(0): Modeline "1024x600"x0.0   51.95  1024 1072 1104 1356  600 603 609 638 -hsync -vsync (38.3 kHz)
[    29.407] (II) RADEON(0): EDID vendor "AUO", prod id 8274
[    29.407] (II) RADEON(0): Printing DDC gathered Modelines:
[    29.407] (II) RADEON(0): Modeline "1024x600"x0.0   51.95  1024 1072 1104 1356  600 603 609 638 -hsync -vsync (38.3 kHz)
[    29.613] (II) RADEON(0): EDID vendor "AUO", prod id 8274
[    29.613] (II) RADEON(0): Printing DDC gathered Modelines:
[    29.613] (II) RADEON(0): Modeline "1024x600"x0.0   51.95  1024 1072 1104 1356  600 603 609 638 -hsync -vsync (38.3 kHz)
[    34.480] (II) XKB: reuse xkmfile /var/lib/xkb/server-D69B3F218E38E591130D7699406A1961AEEE0C6B.xkm
[    41.449] (II) RADEON(0): EDID vendor "AUO", prod id 8274
[    41.449] (II) RADEON(0): Printing DDC gathered Modelines:
[    41.449] (II) RADEON(0): Modeline "1024x600"x0.0   51.95  1024 1072 1104 1356  600 603 609 638 -hsync -vsync (38.3 kHz)
[    50.223] (II) RADEON(0): EDID vendor "AUO", prod id 8274
[    50.223] (II) RADEON(0): Printing DDC gathered Modelines:
[    50.223] (II) RADEON(0): Modeline "1024x600"x0.0   51.95  1024 1072 1104 1356  600 603 609 638 -hsync -vsync (38.3 kHz)

[shalom]

Codice: Seleziona tutto

cat /var/log/dmesg

Codice: Seleziona tutto

[    0.482466] pnp 00:02: [irq 8]
[    0.482472] pnp 00:02: [mem 0xfed00000-0xfed003ff]
[    0.482552] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.482748] pnp 00:03: [io  0x0000-0x000f]
[    0.482754] pnp 00:03: [io  0x0081-0x008f]
[    0.482760] pnp 00:03: [io  0x00c0-0x00df]
[    0.482767] pnp 00:03: [dma 4]
[    0.482861] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.482887] pnp 00:04: [io  0x00f0-0x00fe]
[    0.482971] pnp 00:04: [irq 13]
[    0.483063] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.483228] pnp 00:05: [io  0x0070-0x0071]
[    0.483317] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.483342] pnp 00:06: [io  0x0061]
[    0.483434] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.483512] pnp 00:07: [io  0x0060]
[    0.483517] pnp 00:07: [io  0x0064]
[    0.483530] pnp 00:07: [irq 1]
[    0.483625] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.484121] pnp 00:08: [irq 12]
[    0.484215] pnp 00:08: Plug and Play ACPI device, IDs ETD0500 ETD0001 PNP0f13 (active)
[    0.484297] pnp 00:09: [io  0x0010-0x001f]
[    0.484303] pnp 00:09: [io  0x002e-0x002f]
[    0.484308] pnp 00:09: [io  0x0072-0x0073]
[    0.484313] pnp 00:09: [io  0x0080]
[    0.484318] pnp 00:09: [io  0x00b0-0x00b1]
[    0.484323] pnp 00:09: [io  0x0092]
[    0.484328] pnp 00:09: [io  0x0400-0x04cf]
[    0.484334] pnp 00:09: [io  0x04d0-0x04d1]
[    0.484339] pnp 00:09: [io  0x04d6]
[    0.484344] pnp 00:09: [io  0x0680-0x06ff]
[    0.484349] pnp 00:09: [io  0x077a]
[    0.484354] pnp 00:09: [io  0x0c00-0x0c01]
[    0.484359] pnp 00:09: [io  0x0c14]
[    0.484364] pnp 00:09: [io  0x0c50-0x0c52]
[    0.484369] pnp 00:09: [io  0x0c6c]
[    0.484373] pnp 00:09: [io  0x0c6f]
[    0.484378] pnp 00:09: [io  0x0cd0-0x0cdb]
[    0.484548] system 00:09: [io  0x0400-0x04cf] has been reserved
[    0.484556] system 00:09: [io  0x04d0-0x04d1] has been reserved
[    0.484563] system 00:09: [io  0x04d6] has been reserved
[    0.484570] system 00:09: [io  0x0680-0x06ff] has been reserved
[    0.484577] system 00:09: [io  0x077a] has been reserved
[    0.484584] system 00:09: [io  0x0c00-0x0c01] has been reserved
[    0.484591] system 00:09: [io  0x0c14] has been reserved
[    0.484598] system 00:09: [io  0x0c50-0x0c52] has been reserved
[    0.484605] system 00:09: [io  0x0c6c] has been reserved
[    0.484611] system 00:09: [io  0x0c6f] has been reserved
[    0.484618] system 00:09: [io  0x0cd0-0x0cdb] has been reserved
[    0.484628] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.484760] pnp 00:0a: [mem 0x000e0000-0x000fffff]
[    0.484768] pnp 00:0a: [mem 0xffe00000-0xffffffff]
[    0.484916] system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.484925] system 00:0a: [mem 0xffe00000-0xffffffff] has been reserved
[    0.484934] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.552260] pnp: PnP ACPI: found 11 devices
[    0.552271] ACPI: ACPI bus type pnp unregistered
[    0.562778] PCI: max bus depth: 1 pci_try_num: 2
[    0.562920] pci 0000:00:14.4: PCI bridge to [bus 01-01]
[    0.562944] pci 0000:00:15.0: PCI bridge to [bus 02-05]
[    0.562954] pci 0000:00:15.0:   bridge window [io  0x3000-0x3fff]
[    0.562966] pci 0000:00:15.0:   bridge window [mem 0x90300000-0x903fffff]
[    0.562977] pci 0000:00:15.0:   bridge window [mem 0x90000000-0x900fffff 64bit pref]
[    0.562990] pci 0000:00:15.2: PCI bridge to [bus 06-06]
[    0.562998] pci 0000:00:15.2:   bridge window [io  0x2000-0x2fff]
[    0.563009] pci 0000:00:15.2:   bridge window [mem 0x90200000-0x902fffff]
[    0.563025] pci 0000:00:15.3: PCI bridge to [bus 07-07]
[    0.563036] pci 0000:00:15.3:   bridge window [mem 0x90100000-0x901fffff]
[    0.563107] pci 0000:00:15.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.563117] pci 0000:00:15.0: setting latency timer to 64
[    0.563133] pci 0000:00:15.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.563143] pci 0000:00:15.2: setting latency timer to 64
[    0.563158] pci 0000:00:15.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.563167] pci 0000:00:15.3: setting latency timer to 64
[    0.563177] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.563184] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.563191] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.563198] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[    0.563204] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[    0.563211] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[    0.563217] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
[    0.563223] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
[    0.563230] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
[    0.563236] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
[    0.563243] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
[    0.563249] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
[    0.563256] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
[    0.563262] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
[    0.563269] pci_bus 0000:00: resource 18 [mem 0x7f000000-0xf7ffffff]
[    0.563275] pci_bus 0000:00: resource 19 [mem 0xfc000000-0xffffffff]
[    0.563283] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7]
[    0.563290] pci_bus 0000:01: resource 5 [io  0x0d00-0xffff]
[    0.563298] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[    0.563305] pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000c3fff]
[    0.563313] pci_bus 0000:01: resource 8 [mem 0x000c4000-0x000c7fff]
[    0.563321] pci_bus 0000:01: resource 9 [mem 0x000c8000-0x000cbfff]
[    0.563329] pci_bus 0000:01: resource 10 [mem 0x000d0000-0x000d3fff]
[    0.563337] pci_bus 0000:01: resource 11 [mem 0x000d4000-0x000d7fff]
[    0.563345] pci_bus 0000:01: resource 12 [mem 0x000d8000-0x000dbfff]
[    0.563352] pci_bus 0000:01: resource 13 [mem 0x000dc000-0x000dffff]
[    0.563360] pci_bus 0000:01: resource 14 [mem 0x000e0000-0x000e3fff]
[    0.563368] pci_bus 0000:01: resource 15 [mem 0x000e4000-0x000e7fff]
[    0.563376] pci_bus 0000:01: resource 16 [mem 0x000e8000-0x000ebfff]
[    0.563384] pci_bus 0000:01: resource 17 [mem 0x000ec000-0x000effff]
[    0.563392] pci_bus 0000:01: resource 18 [mem 0x7f000000-0xf7ffffff]
[    0.563400] pci_bus 0000:01: resource 19 [mem 0xfc000000-0xffffffff]
[    0.563408] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.563415] pci_bus 0000:02: resource 1 [mem 0x90300000-0x903fffff]
[    0.563424] pci_bus 0000:02: resource 2 [mem 0x90000000-0x900fffff 64bit pref]
[    0.563432] pci_bus 0000:06: resource 0 [io  0x2000-0x2fff]
[    0.563439] pci_bus 0000:06: resource 1 [mem 0x90200000-0x902fffff]
[    0.563448] pci_bus 0000:07: resource 1 [mem 0x90100000-0x901fffff]
[    0.563569] NET: Registered protocol family 2
[    0.563874] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.565889] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    0.569659] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.570490] TCP: Hash tables configured (established 262144 bind 65536)
[    0.570497] TCP reno registered
[    0.570530] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.570583] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.570851] NET: Registered protocol family 1
[    0.570901] pci 0000:00:01.0: Boot video device
[    0.571039] pci 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.640199] pci 0000:00:12.0: PCI INT A disabled
[    0.640272] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.656204] pci 0000:00:12.2: PCI INT B disabled
[    0.656247] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.728198] pci 0000:00:13.0: PCI INT A disabled
[    0.728243] pci 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.744204] pci 0000:00:13.2: PCI INT B disabled
[    0.744335] PCI: CLS 64 bytes, default 64
[    0.744360] Simple Boot Flag at 0x44 set to 0x1
[    0.744853] perf: AMD IBS detected (0x000000ff)
[    0.745274] audit: initializing netlink socket (disabled)
[    0.745305] type=2000 audit(1336736383.744:1): initialized
[    0.821592] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.847687] VFS: Disk quotas dquot_6.5.2
[    0.847848] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.849535] fuse init (API version 7.17)
[    0.849786] msgmni has been set to 3426
[    0.851303] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.851462] io scheduler noop registered
[    0.851468] io scheduler deadline registered
[    0.851564] io scheduler cfq registered (default)
[    0.852290] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.852360] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.856214] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.857107] ACPI: AC Adapter [ACAD] (off-line)
[    0.857323] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.857337] ACPI: Power Button [PWRB]
[    0.857451] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[    0.857461] ACPI: Sleep Button [SLPB]
[    0.857623] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[    0.857761] ACPI: Lid Switch [LID]
[    0.857882] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.857891] ACPI: Power Button [PWRF]
[    0.858187] ACPI: acpi_idle registered with cpuidle
[    0.928449] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.928483] ACPI: Battery Slot [BAT1] (battery present)
[    0.928566] ERST: Table is not found!
[    0.928572] GHES: HEST is not enabled!
[    0.928963] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.957964] Freeing initrd memory: 13840k freed
[    1.054166] Linux agpgart interface v0.103
[    1.060536] brd: module loaded
[    1.063856] loop: module loaded
[    1.064439] ahci 0000:00:11.0: version 3.0
[    1.064490] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    1.064721] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[    1.064732] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
[    1.065655] scsi0 : ahci
[    1.065959] ata1: SATA max UDMA/133 abar m1024@0x9044c000 port 0x9044c100 irq 19
[    1.066847] Fixed MDIO Bus: probed
[    1.066909] tun: Universal TUN/TAP device driver, 1.6
[    1.066914] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.067349] PPP generic driver version 2.4.2
[    1.067901] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.068076] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.068196] ehci_hcd 0000:00:12.2: setting latency timer to 64
[    1.068205] ehci_hcd 0000:00:12.2: EHCI Host Controller
[    1.068396] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[    1.068484] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.068530] QUIRK: Enable AMD PLL fix
[    1.068622] ehci_hcd 0000:00:12.2: debug port 1
[    1.068679] ehci_hcd 0000:00:12.2: irq 17, io mem 0x9044a000
[    1.080320] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.080943] hub 1-0:1.0: USB hub found
[    1.080958] hub 1-0:1.0: 5 ports detected
[    1.081263] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.081373] ehci_hcd 0000:00:13.2: setting latency timer to 64
[    1.081381] ehci_hcd 0000:00:13.2: EHCI Host Controller
[    1.081807] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[    1.081898] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.081947] ehci_hcd 0000:00:13.2: debug port 1
[    1.081974] ehci_hcd 0000:00:13.2: irq 17, io mem 0x90448000
[    1.092320] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.092936] hub 2-0:1.0: USB hub found
[    1.092951] hub 2-0:1.0: 5 ports detected
[    1.093195] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.093301] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.093412] ohci_hcd 0000:00:12.0: setting latency timer to 64
[    1.093419] ohci_hcd 0000:00:12.0: OHCI Host Controller
[    1.093833] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[    1.093981] ohci_hcd 0000:00:12.0: irq 18, io mem 0x9044b000
[    1.152876] hub 3-0:1.0: USB hub found
[    1.152975] hub 3-0:1.0: 5 ports detected
[    1.153277] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.153358] ohci_hcd 0000:00:13.0: setting latency timer to 64
[    1.153365] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    1.153777] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4
[    1.153899] ohci_hcd 0000:00:13.0: irq 18, io mem 0x90449000
[    1.212814] hub 4-0:1.0: USB hub found
[    1.212901] hub 4-0:1.0: 5 ports detected
[    1.213166] uhci_hcd: USB Universal Host Controller Interface driver
[    1.213343] usbcore: registered new interface driver libusual
[    1.213449] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS1] at 0x60,0x64 irq 1,12
[    1.260824] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.260836] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.261613] mousedev: PS/2 mouse device common for all mice
[    1.263766] rtc_cmos 00:05: RTC can wake from S4
[    1.264096] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    1.264219] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[    1.264454] device-mapper: uevent: version 1.0.3
[    1.264823] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    1.265022] cpuidle: using governor ladder
[    1.265240] cpuidle: using governor menu
[    1.265245] EFI Variables Facility v0.08 2004-May-17
[    1.265812] TCP cubic registered
[    1.266108] NET: Registered protocol family 10
[    1.267369] NET: Registered protocol family 17
[    1.267419] Registering the dns_resolver key type
[    1.268419] PM: Hibernation image not present or could not be loaded.
[    1.268473] registered taskstats version 1
[    1.299902]   Magic number: 12:118:681
[    1.300250] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.300302] rtc_cmos 00:05: setting system clock to 2012-05-11 11:39:44 UTC (1336736384)
[    1.300317] powernow-k8: Found 1 AMD C-60 APU with Radeon(tm) HD Graphics (2 cpu cores) (version 2.20.00)
[    1.300343] powernow-k8: Core Performance Boosting: on.
[    1.300411] powernow-k8:    0 : pstate 0 (1000 MHz)
[    1.300415] powernow-k8:    1 : pstate 1 (800 MHz)
[    1.304714] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.304723] EDD information not available.
[    1.404347] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[    1.560286] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.561789] ata1.00: ATA-8: Hitachi HTS543232A7A384, ES2OA90B, max UDMA/133
[    1.561801] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.562957] ata1.00: configured for UDMA/133
[    1.563541] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54323 ES2O PQ: 0 ANSI: 5
[    1.563886] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    1.563945] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.564051] sd 0:0:0:0: [sda] Write Protect is off
[    1.564058] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.564115] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.633346]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[    1.635400] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.639419] Freeing unused kernel memory: 920k freed
[    1.640208] Write protecting the kernel read-only data: 12288k
[    1.654349] Freeing unused kernel memory: 1608k freed
[    1.665857] Freeing unused kernel memory: 1196k freed
[    1.668527] ACPI: Battery Slot [BAT1] (battery present)
[    1.726223] udevd[87]: starting version 175
[    1.744251] Refined TSC clocksource calibration: 997.501 MHz.
[    1.744268] Switching to clocksource tsc
[    1.986378] atl1c 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.986476] atl1c 0000:06:00.0: setting latency timer to 64
[    2.113536] atl1c 0000:06:00.0: version 1.0.1.0-NAPI
[    2.774195] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[   18.199584] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.235611] udevd[328]: starting version 175
[   18.272465] Adding 1811452k swap on /dev/sda6.  Priority:-1 extents:1 across:1811452k 
[   18.298917] lp: driver loaded but no devices found
[   18.510064] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[   18.710091] acpi device:01: registered as cooling_device2
[   18.710286] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[   18.710428] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   18.711214] wmi: Mapper loaded
[   18.884981] acer_wmi: Acer Laptop ACPI-WMI Extras
[   18.885028] acer_wmi: Function bitmap for Communication Button: 0x801
[   18.885040] acer_wmi: Brightness must be controlled by generic video driver
[   18.893319] input: Acer WMI hotkeys as /devices/virtual/input/input6
[   18.900347] acer_wmi: Get 0x1 Device Status failed: 0xe2 - 0x0
[   18.910292] acer_wmi: Get 0x800 Device Status failed: 0xe2 - 0x0
[   18.929805] acer_wmi: Get Current Device Status failed: 0xe2 - 0x0
[   18.977511] type=1400 audit(1336729202.174:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=551 comm="apparmor_parser"
[   18.992762] type=1400 audit(1336729202.190:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=551 comm="apparmor_parser"
[   18.993380] type=1400 audit(1336729202.190:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=551 comm="apparmor_parser"
[   19.031625] Bluetooth: Core ver 2.16
[   19.031687] NET: Registered protocol family 31
[   19.031694] Bluetooth: HCI device and connection manager initialized
[   19.031702] Bluetooth: HCI socket layer initialized
[   19.031708] Bluetooth: L2CAP socket layer initialized
[   19.031726] Bluetooth: SCO socket layer initialized
[   19.043736] ppdev: user-space parallel port driver
[   19.059793] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   19.059805] Bluetooth: BNEP filters: protocol multicast
[   19.142118] Bluetooth: RFCOMM TTY layer initialized
[   19.142138] Bluetooth: RFCOMM socket layer initialized
[   19.142144] Bluetooth: RFCOMM ver 1.11
[   19.203141] type=1400 audit(1336729202.398:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=627 comm="apparmor_parser"
[   19.210502] type=1400 audit(1336729202.406:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=627 comm="apparmor_parser"
[   19.274613] [drm] Initialized drm 1.1.0 20060810
[   19.344954] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[   19.346279] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[   19.346721] SP5100 TCO timer: mmio address 0xb8fe00 already in use
[   19.365555] atl1c 0000:06:00.0: irq 40 for MSI/MSI-X
[   19.365681] atl1c 0000:06:00.0: atl1c: eth0 NIC Link is Up<10 Mbps Half Duplex>
[   19.369285] Linux video capture interface: v2.00
[   19.391892] uvcvideo: Found UVC 1.00 device WebCam (064e:d214)
[   19.400313] cfg80211: Calling CRDA to update world regulatory domain
[   19.434008] input: WebCam as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1:1.0/input/input7
[   19.450941] usbcore: registered new interface driver uvcvideo
[   19.450952] USB Video Class driver (1.1.1)
[   19.604500] [drm] radeon defaulting to kernel modesetting.
[   19.604513] [drm] radeon kernel modesetting enabled.
[   19.604645] radeon 0000:00:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   19.604658] radeon 0000:00:01.0: setting latency timer to 64
[   19.605468] [drm] initializing kernel modesetting (PALM 0x1002:0x9807 0x1025:0x0598).
[   19.608524] [drm] register mmio base: 0x90400000
[   19.608530] [drm] register mmio size: 262144
[   19.609644] ATOM BIOS: Acer
[   19.609712] radeon 0000:00:01.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used)
[   19.609721] radeon 0000:00:01.0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF
[   19.610049] [drm] Detected VRAM RAM=256M, BAR=256M
[   19.610060] [drm] RAM width 32bits DDR
[   19.614292] [TTM] Zone  kernel: Available graphics memory: 886062 kiB.
[   19.614302] [TTM] Initializing pool allocator.
[   19.614379] [drm] radeon: 256M of VRAM memory ready
[   19.614386] [drm] radeon: 512M of GTT memory ready.
[   19.614426] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   19.614431] [drm] Driver supports precise vblank timestamp query.
[   19.614517] radeon 0000:00:01.0: irq 41 for MSI/MSI-X
[   19.614529] radeon 0000:00:01.0: radeon: using MSI.
[   19.614600] [drm] radeon: irq initialized.
[   19.614614] [drm] GART: num cpu pages 131072, num gpu pages 131072
[   19.619873] [drm] Loading PALM Microcode
[   19.628918] brcmsmac 0000:07:00.0: bus 7 slot 0 func 0 irq 11
[   19.629157] brcmsmac 0000:07:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[   19.629172] brcmsmac 0000:07:00.0: setting latency timer to 64
[   20.192739] init: failsafe main process (754) killed by TERM signal
[   20.250512] psmouse serio1: elantech: assuming hardware version 2 (with firmware version 0x040213)
[   20.357719] psmouse serio1: elantech: Synaptics capabilities query result 0x68, 0x18, 0x0c.
[   20.405921] type=1400 audit(1336729203.602:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=849 comm="apparmor_parser"
[   20.412724] type=1400 audit(1336729203.610:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=850 comm="apparmor_parser"
[   20.414369] type=1400 audit(1336729203.610:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=850 comm="apparmor_parser"
[   20.415012] type=1400 audit(1336729203.610:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=850 comm="apparmor_parser"
[   20.461389] type=1400 audit(1336729203.658:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=856 comm="apparmor_parser"
[   20.653574] cfg80211: World regulatory domain updated:
[   20.653588] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   20.653597] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   20.653605] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   20.653612] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   20.653619] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   20.653626] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   20.721942] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[   20.722403] radeon 0000:00:01.0: WB enabled
[   20.740242] [drm] ring test succeeded in 1 usecs
[   20.740621] [drm] radeon: ib pool ready.
[   20.740806] [drm] ib test succeeded in 0 usecs
[   20.749824] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   20.749838] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   20.749845] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   20.749854] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   20.749861] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   20.749869] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   20.749875] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   20.749883] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   20.749889] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   20.749897] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   20.749904] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   20.749911] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   20.749918] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   20.749925] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   20.749932] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   20.749939] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   20.749945] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   20.749953] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   20.749959] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   20.749967] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   20.749973] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   20.749980] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   20.749987] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   20.749994] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   20.750001] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   20.750008] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   20.750015] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[   20.750022] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   20.756115] psmouse serio1: elantech: retrying ps2 command 0xe6 (2).
[   20.756934] [drm] Radeon Display Connectors
[   20.756944] [drm] Connector 0:
[   20.756949] [drm]   LVDS
[   20.756953] [drm]   HPD1
[   20.756960] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[   20.756965] [drm]   Encoders:
[   20.756969] [drm]     LCD1: INTERNAL_UNIPHY
[   20.756973] [drm] Connector 1:
[   20.756977] [drm]   HDMI-A
[   20.756980] [drm]   HPD2
[   20.756986] [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[   20.756991] [drm]   Encoders:
[   20.756994] [drm]     DFP1: INTERNAL_UNIPHY
[   20.756998] [drm] Connector 2:
[   20.757002] [drm]   VGA
[   20.757008] [drm]   DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[   20.757012] [drm]   Encoders:
[   20.757016] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   20.757154] [drm] Internal thermal controller without fan control
[   20.757408] [drm] radeon: power management initialized
[   20.800502] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   20.802633] cfg80211: Calling CRDA for country: XV
[   21.054037] init: alsa-restore main process (960) terminated with status 19
[   21.103041] ieee80211 phy0: brcms_ops_config: change monitor mode: false (implement)
[   21.103055] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[   21.107927] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[   21.108936] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   21.118698] ADDRCONF(NETDEV_UP): wlan0: link is not ready

[giulux]

non è possibile che tu continui a postare in questo modo!
ti ho spiegato la procedura corretta, non devi che applicarla con un minimo di attenzione
(oltretutto nessuno ti ha detto di usare il tasto List, come hai fatto)
ho corretto il tuo post precedente, anche perchè tu possa esaminarlo e vedere come si fa

ti invito, quindi, a correggere i precedenti post con la dovuta attenzione prima di compiere qualsiasi altro inserimento o sarò costretto a provvedere diversamente