ciao a tutti!
Ho un piccolo problema, praticamene quando faccio per spegnere il computer, se ci sono ancora dei programmi aperti, nn si spegne, cioè viene fuori la schermata viola con scritto UBUNTU e sotto i 5 pallini ( che nn si colorano) e rimane fermo li, per spegnerlo devo premere poi il tasto di accensione...
qualche idea??
grazie mille!
Ubuntu nn si spegne..
-
dadexix86
- Tenace Tecnocrate
- Messaggi: 16364
- Iscrizione: domenica 22 marzo 2009, 19:58
- Desktop: Unity
- Distribuzione: Ubuntu 18.04 x86_64
- Località: Paris, France
Re: Ubuntu nn si spegne..
Quando hai la schermata con i pallini premi [Esc] e leggi i messaggi che compaiono, così vedi qual è il problema.
Non si dà supporto tramite mp in forum
L'utilizzo del tasto [Code] quando scrivi in forum risolve i 2/3 dei tuoi problemi
Per problemi con Skype rivolgersi qui. | Un Matematico Migrante
L'utilizzo del tasto [Code] quando scrivi in forum risolve i 2/3 dei tuoi problemi
Per problemi con Skype rivolgersi qui. | Un Matematico Migrante
-
Marcico
- Prode Principiante
- Messaggi: 111
- Iscrizione: mercoledì 22 febbraio 2012, 10:02
- Distribuzione: Ubuntu 12.04 LTS x86_64
- Località: Milano
Re: Ubuntu nn si spegne..
Se premo esc nn succede niente..
-
dadexix86
- Tenace Tecnocrate
- Messaggi: 16364
- Iscrizione: domenica 22 marzo 2009, 19:58
- Desktop: Unity
- Distribuzione: Ubuntu 18.04 x86_64
- Località: Paris, France
Re: Ubuntu nn si spegne..
Scrivi in italiano.
Proviamo modificando il grub:
cerca la riga GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" e modificala in GRUB_CMDLINE_LINUX_DEFAULT="" poi aggiorna grub
e riprova.
Proviamo modificando il grub:
Codice: Seleziona tutto
sudo gedit /etc/default/grubCodice: Seleziona tutto
sudo update-grub
Ultima modifica di dadexix86 il domenica 15 luglio 2012, 17:46, modificato 1 volta in totale.
Non si dà supporto tramite mp in forum
L'utilizzo del tasto [Code] quando scrivi in forum risolve i 2/3 dei tuoi problemi
Per problemi con Skype rivolgersi qui. | Un Matematico Migrante
L'utilizzo del tasto [Code] quando scrivi in forum risolve i 2/3 dei tuoi problemi
Per problemi con Skype rivolgersi qui. | Un Matematico Migrante
-
Marcico
- Prode Principiante
- Messaggi: 111
- Iscrizione: mercoledì 22 febbraio 2012, 10:02
- Distribuzione: Ubuntu 12.04 LTS x86_64
- Località: Milano
Re: Ubuntu nn si spegne..
ma non é uguale la riga?
-
dadexix86
- Tenace Tecnocrate
- Messaggi: 16364
- Iscrizione: domenica 22 marzo 2009, 19:58
- Desktop: Unity
- Distribuzione: Ubuntu 18.04 x86_64
- Località: Paris, France
Re: Ubuntu nn si spegne..
Sì, scusami, ho corretto ora 
Devi togliere lo splash screen e dirgli di non essere "quiet"
Devi togliere lo splash screen e dirgli di non essere "quiet" Non si dà supporto tramite mp in forum
L'utilizzo del tasto [Code] quando scrivi in forum risolve i 2/3 dei tuoi problemi
Per problemi con Skype rivolgersi qui. | Un Matematico Migrante
L'utilizzo del tasto [Code] quando scrivi in forum risolve i 2/3 dei tuoi problemi
Per problemi con Skype rivolgersi qui. | Un Matematico Migrante
-
Marcico
- Prode Principiante
- Messaggi: 111
- Iscrizione: mercoledì 22 febbraio 2012, 10:02
- Distribuzione: Ubuntu 12.04 LTS x86_64
- Località: Milano
Re: Ubuntu nn si spegne..
adesso quando spengo con dei programmi aperti mi esce una schermata nera con un sacco di righe di testo, con codici.. e si blocca..
se invece spengo con tutti i programmi chiusi esce la stessa schermata che dice
waiting all process to close ( all'incirca) e poi si spegne..
se invece spengo con tutti i programmi chiusi esce la stessa schermata che dice
waiting all process to close ( all'incirca) e poi si spegne..
-
dadexix86
- Tenace Tecnocrate
- Messaggi: 16364
- Iscrizione: domenica 22 marzo 2009, 19:58
- Desktop: Unity
- Distribuzione: Ubuntu 18.04 x86_64
- Località: Paris, France
Re: Ubuntu nn si spegne..
A me interessano i codici. Armati di carta e penna, copiali e riportali qui usando i tag per il codice.
Non si dà supporto tramite mp in forum
L'utilizzo del tasto [Code] quando scrivi in forum risolve i 2/3 dei tuoi problemi
Per problemi con Skype rivolgersi qui. | Un Matematico Migrante
L'utilizzo del tasto [Code] quando scrivi in forum risolve i 2/3 dei tuoi problemi
Per problemi con Skype rivolgersi qui. | Un Matematico Migrante
-
Marcico
- Prode Principiante
- Messaggi: 111
- Iscrizione: mercoledì 22 febbraio 2012, 10:02
- Distribuzione: Ubuntu 12.04 LTS x86_64
- Località: Milano
Re: Ubuntu nn si spegne..
posso farlo.. però i codici all'inizio si aggiornano e scorrono.. non sono sicuro di riuscire a recuperare i primi che non vedo più..
comunque dopo guardo.
comunque dopo guardo.
-
dadexix86
- Tenace Tecnocrate
- Messaggi: 16364
- Iscrizione: domenica 22 marzo 2009, 19:58
- Desktop: Unity
- Distribuzione: Ubuntu 18.04 x86_64
- Località: Paris, France
Re: Ubuntu nn si spegne..
No, no, mi interessano gli ultimi, quelli su cui si blocca
Non si dà supporto tramite mp in forum
L'utilizzo del tasto [Code] quando scrivi in forum risolve i 2/3 dei tuoi problemi
Per problemi con Skype rivolgersi qui. | Un Matematico Migrante
L'utilizzo del tasto [Code] quando scrivi in forum risolve i 2/3 dei tuoi problemi
Per problemi con Skype rivolgersi qui. | Un Matematico Migrante
-
Marcico
- Prode Principiante
- Messaggi: 111
- Iscrizione: mercoledì 22 febbraio 2012, 10:02
- Distribuzione: Ubuntu 12.04 LTS x86_64
- Località: Milano
Re: Ubuntu nn si spegne..
ok appena riesco guardo
-
Marcico
- Prode Principiante
- Messaggi: 111
- Iscrizione: mercoledì 22 febbraio 2012, 10:02
- Distribuzione: Ubuntu 12.04 LTS x86_64
- Località: Milano
Re: Ubuntu nn si spegne..
scusa ma viene fuori un bordello di roba, per cui ti posto le immagini..
se nn riesci a leggere bene, se almeno riesci a dirmi la parte che ti interessa te la trascrivo..
comunque all'inizio era fisso come nella prima immagine, poi è scorso e si è fermato sulla seconda.
http://img88.imageshack.us/img88/561/20 ... 10539a.jpg
http://img843.imageshack.us/img843/7964 ... 210559.jpg
se nn riesci a leggere bene, se almeno riesci a dirmi la parte che ti interessa te la trascrivo..
comunque all'inizio era fisso come nella prima immagine, poi è scorso e si è fermato sulla seconda.
http://img88.imageshack.us/img88/561/20 ... 10539a.jpg
http://img843.imageshack.us/img843/7964 ... 210559.jpg
Ultima modifica di Marcico il lunedì 16 luglio 2012, 0:27, modificato 1 volta in totale.
-
dadexix86
- Tenace Tecnocrate
- Messaggi: 16364
- Iscrizione: domenica 22 marzo 2009, 19:58
- Desktop: Unity
- Distribuzione: Ubuntu 18.04 x86_64
- Località: Paris, France
Re: Ubuntu nn si spegne..
Metti i link alle immagini, queste sono solo miniature.
Non si dà supporto tramite mp in forum
L'utilizzo del tasto [Code] quando scrivi in forum risolve i 2/3 dei tuoi problemi
Per problemi con Skype rivolgersi qui. | Un Matematico Migrante
L'utilizzo del tasto [Code] quando scrivi in forum risolve i 2/3 dei tuoi problemi
Per problemi con Skype rivolgersi qui. | Un Matematico Migrante
-
Marcico
- Prode Principiante
- Messaggi: 111
- Iscrizione: mercoledì 22 febbraio 2012, 10:02
- Distribuzione: Ubuntu 12.04 LTS x86_64
- Località: Milano
Re: Ubuntu nn si spegne..
si ho sistemato
-
dadexix86
- Tenace Tecnocrate
- Messaggi: 16364
- Iscrizione: domenica 22 marzo 2009, 19:58
- Desktop: Unity
- Distribuzione: Ubuntu 18.04 x86_64
- Località: Paris, France
Re: Ubuntu nn si spegne..
Ottimo. Posta
e la tua configurazione hardware / driver.
E anche
e
Codice: Seleziona tutto
cat /etc/default/grubCodice: Seleziona tutto
apt-cache policy linux-headers-generic*E anche
Codice: Seleziona tutto
cat /var/log/Xorg.0.log.oldCodice: Seleziona tutto
cat /var/log/dmesg.0 Non si dà supporto tramite mp in forum
L'utilizzo del tasto [Code] quando scrivi in forum risolve i 2/3 dei tuoi problemi
Per problemi con Skype rivolgersi qui. | Un Matematico Migrante
L'utilizzo del tasto [Code] quando scrivi in forum risolve i 2/3 dei tuoi problemi
Per problemi con Skype rivolgersi qui. | Un Matematico Migrante
-
Marcico
- Prode Principiante
- Messaggi: 111
- Iscrizione: mercoledì 22 febbraio 2012, 10:02
- Distribuzione: Ubuntu 12.04 LTS x86_64
- Località: Milano
Re: Ubuntu nn si spegne..
Codice: Seleziona tutto
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT=""
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
Codice: Seleziona tutto
linux-headers-generic:
Installato: 3.2.0.26.28
Candidato: 3.2.0.26.28
Tabella versione:
*** 3.2.0.26.28 0
500 http://it.archive.ubuntu.com/ubuntu/ precise-updates/main amd64 Packages
500 http://security.ubuntu.com/ubuntu/ precise-security/main amd64 Packages
100 /var/lib/dpkg/status
3.2.0.23.25 0
500 http://it.archive.ubuntu.com/ubuntu/ precise/main amd64 Packages
linux-headers-generic-pae:
Installato: (nessuno)
Candidato: (nessuno)
Tabella versione:
-
Marcico
- Prode Principiante
- Messaggi: 111
- Iscrizione: mercoledì 22 febbraio 2012, 10:02
- Distribuzione: Ubuntu 12.04 LTS x86_64
- Località: Milano
Re: Ubuntu nn si spegne..
Il 3° comando mi mosstra così tanta roba che il terminale non la contiene, questo è tutto quello ke mi fa vedere.
Codice: Seleziona tutto
[ 17.438] (--) Depth 24 pixmap format is 32 bpp
[ 17.439] (II) Loading extension ATIFGLRXDRI
[ 17.439] (II) fglrx(0): doing swlDriScreenInit
[ 17.439] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 17.439] ukiDynamicMajor: found major device number 251
[ 17.439] ukiDynamicMajor: found major device number 251
[ 17.439] ukiDynamicMajor: found major device number 251
[ 17.439] ukiOpenByBusid: Searching for BusID PCI:1:5:0
[ 17.439] ukiOpenDevice: node name is /dev/ati/card0
[ 17.439] ukiOpenDevice: open result is 20, (OK)
[ 17.439] ukiOpenByBusid: ukiOpenMinor returns 20
[ 17.439] ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0
[ 17.439] (II) fglrx(0): [uki] DRM interface version 1.0
[ 17.439] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:5:0"
[ 17.439] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 17.439] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f1be5e1e000
[ 17.439] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 17.439] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 17.439] (II) fglrx(0): swlDriScreenInit done
[ 17.439] (II) fglrx(0): Kernel Module Version Information:
[ 17.439] (II) fglrx(0): Name: fglrx
[ 17.439] (II) fglrx(0): Version: 8.96.4
[ 17.439] (II) fglrx(0): Date: Mar 12 2012
[ 17.439] (II) fglrx(0): Desc: ATI FireGL DRM kernel module
[ 17.439] (II) fglrx(0): Kernel Module version matches driver.
[ 17.439] (II) fglrx(0): Kernel Module Build Time Information:
[ 17.439] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.2.0-26-generic
[ 17.439] (II) fglrx(0): Build-Kernel MODVERSIONS: no
[ 17.439] (II) fglrx(0): Build-Kernel __SMP__: yes
[ 17.439] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 17.439] (II) fglrx(0): [uki] register handle = 0x00004000
[ 17.460] (II) fglrx(0): DRI initialization successfull
[ 17.460] (II) fglrx(0): FBADPhys: 0xd3ff7000 FBMappedSize: 0x01004000
[ 17.460] (II) fglrx(0): Reserved 0x02900000 bytes of sideport memory for power saving
[ 17.461] (==) fglrx(0): Backing store disabled
[ 17.461] (II) Loading extension FGLRXEXTENSION
[ 17.461] (==) fglrx(0): DPMS enabled
[ 17.461] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 17.461] (**) fglrx(0): Textured Video is enabled.
[ 17.461] (II) LoadModule: "glesx"
[ 17.461] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/glesx.so
[ 17.462] (II) Module glesx: vendor="X.Org Foundation"
[ 17.462] compiled for 1.4.99.906, module version = 1.0.0
[ 17.462] (II) Loading extension GLESX
[ 17.462] (II) fglrx(0): GLESX enableFlags = 528
[ 17.462] (II) fglrx(0): GLESX is enabled
[ 17.462] (II) LoadModule: "amdxmm"
[ 17.462] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/amdxmm.so
[ 17.462] (II) Module amdxmm: vendor="X.Org Foundation"
[ 17.462] compiled for 1.4.99.906, module version = 2.0.0
[ 17.463] (II) Loading extension AMDXVOPL
[ 17.463] (II) Loading extension AMDXVBA
[ 17.464] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 17.466] (II) fglrx(0): Enable composite support successfully
[ 17.466] (II) fglrx(0): X context handle = 0x1
[ 17.466] (II) fglrx(0): [DRI] installation complete
[ 17.467] (==) fglrx(0): Silken mouse enabled
[ 17.467] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 17.468] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[ 17.468] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[ 17.468] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[ 18.094] (--) RandR disabled
[ 18.094] (II) Initializing built-in extension Generic Event Extension
[ 18.094] (II) Initializing built-in extension SHAPE
[ 18.094] (II) Initializing built-in extension MIT-SHM
[ 18.094] (II) Initializing built-in extension XInputExtension
[ 18.094] (II) Initializing built-in extension XTEST
[ 18.094] (II) Initializing built-in extension BIG-REQUESTS
[ 18.094] (II) Initializing built-in extension SYNC
[ 18.094] (II) Initializing built-in extension XKEYBOARD
[ 18.094] (II) Initializing built-in extension XC-MISC
[ 18.094] (II) Initializing built-in extension SECURITY
[ 18.094] (II) Initializing built-in extension XINERAMA
[ 18.094] (II) Initializing built-in extension XFIXES
[ 18.094] (II) Initializing built-in extension RENDER
[ 18.094] (II) Initializing built-in extension RANDR
[ 18.094] (II) Initializing built-in extension COMPOSITE
[ 18.094] (II) Initializing built-in extension DAMAGE
[ 18.113] ukiDynamicMajor: found major device number 251
[ 18.113] ukiDynamicMajor: found major device number 251
[ 18.113] ukiOpenByBusid: Searching for BusID PCI:1:5:0
[ 18.113] ukiOpenDevice: node name is /dev/ati/card0
[ 18.113] ukiOpenDevice: open result is 22, (OK)
[ 18.113] ukiOpenByBusid: ukiOpenMinor returns 22
[ 18.113] ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0
[ 18.210] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 18.210] (II) fglrx(0): Enable the clock gating!
[ 18.210] (II) fglrx(0): Setting screen physical size to 361 x 203
[ 18.219] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 18.222] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 18.222] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 18.222] (II) LoadModule: "evdev"
[ 18.223] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.223] (II) Module evdev: vendor="X.Org Foundation"
[ 18.223] compiled for 1.11.3, module version = 2.7.0
[ 18.223] Module class: X.Org XInput Driver
[ 18.223] ABI class: X.Org XInput driver, version 16.0
[ 18.223] (II) Using input driver 'evdev' for 'Power Button'
[ 18.223] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.223] (**) Power Button: always reports core events
[ 18.223] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 18.223] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 18.223] (--) evdev: Power Button: Found keys
[ 18.223] (II) evdev: Power Button: Configuring as keyboard
[ 18.223] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 18.223] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 18.223] (**) Option "xkb_rules" "evdev"
[ 18.223] (**) Option "xkb_model" "pc105"
[ 18.223] (**) Option "xkb_layout" "it"
[ 18.225] (II) XKB: reuse xkmfile /var/lib/xkb/server-3781FECB9CB8D26EE03343DB2C93394EA704B98F.xkm
[ 18.226] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 18.226] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 18.226] (II) Using input driver 'evdev' for 'Video Bus'
[ 18.226] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.226] (**) Video Bus: always reports core events
[ 18.226] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 18.226] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 18.226] (--) evdev: Video Bus: Found keys
[ 18.226] (II) evdev: Video Bus: Configuring as keyboard
[ 18.226] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input4/event4"
[ 18.226] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 18.226] (**) Option "xkb_rules" "evdev"
[ 18.226] (**) Option "xkb_model" "pc105"
[ 18.226] (**) Option "xkb_layout" "it"
[ 18.227] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 18.227] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 18.227] (II) Using input driver 'evdev' for 'Video Bus'
[ 18.227] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.227] (**) Video Bus: always reports core events
[ 18.227] (**) evdev: Video Bus: Device: "/dev/input/event6"
[ 18.227] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 18.227] (--) evdev: Video Bus: Found keys
[ 18.227] (II) evdev: Video Bus: Configuring as keyboard
[ 18.227] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:06/LNXVIDEO:01/input/input6/event6"
[ 18.227] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 18.227] (**) Option "xkb_rules" "evdev"
[ 18.227] (**) Option "xkb_model" "pc105"
[ 18.227] (**) Option "xkb_layout" "it"
[ 18.228] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 18.228] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 18.228] (II) Using input driver 'evdev' for 'Power Button'
[ 18.228] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.228] (**) Power Button: always reports core events
[ 18.228] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 18.228] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 18.228] (--) evdev: Power Button: Found keys
[ 18.228] (II) evdev: Power Button: Configuring as keyboard
[ 18.228] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 18.228] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 18.228] (**) Option "xkb_rules" "evdev"
[ 18.228] (**) Option "xkb_model" "pc105"
[ 18.228] (**) Option "xkb_layout" "it"
[ 18.229] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 18.229] (II) No input driver specified, ignoring this device.
[ 18.229] (II) This device may have been added with another device file.
[ 18.229] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event9)
[ 18.229] (II) No input driver specified, ignoring this device.
[ 18.229] (II) This device may have been added with another device file.
[ 18.229] (II) config/udev: Adding input device 2SF022 (/dev/input/event12)
[ 18.229] (**) 2SF022: Applying InputClass "evdev keyboard catchall"
[ 18.229] (II) Using input driver 'evdev' for '2SF022'
[ 18.229] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.229] (**) 2SF022: always reports core events
[ 18.229] (**) evdev: 2SF022: Device: "/dev/input/event12"
[ 18.229] (--) evdev: 2SF022: Vendor 0xbda Product 0x5801
[ 18.229] (--) evdev: 2SF022: Found keys
[ 18.229] (II) evdev: 2SF022: Configuring as keyboard
[ 18.229] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/input/input12/event12"
[ 18.229] (II) XINPUT: Adding extended input device "2SF022" (type: KEYBOARD, id 10)
[ 18.229] (**) Option "xkb_rules" "evdev"
[ 18.229] (**) Option "xkb_model" "pc105"
[ 18.229] (**) Option "xkb_layout" "it"
[ 18.230] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event10)
[ 18.230] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 18.230] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 18.230] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.230] (**) Logitech USB Receiver: always reports core events
[ 18.230] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event10"
[ 18.230] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[ 18.230] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[ 18.230] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 18.230] (--) evdev: Logitech USB Receiver: Found relative axes
[ 18.230] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 18.230] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 18.230] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 18.230] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 18.230] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 18.230] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb5/5-5/5-5:1.0/input/input10/event10"
[ 18.230] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 11)
[ 18.230] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 18.230] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 18.231] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 18.231] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 18.231] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 18.231] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 18.231] (II) No input driver specified, ignoring this device.
[ 18.231] (II) This device may have been added with another device file.
[ 18.231] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event11)
[ 18.231] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 18.231] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 18.231] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.231] (**) Logitech USB Receiver: always reports core events
[ 18.231] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event11"
[ 18.231] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[ 18.231] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[ 18.231] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 18.231] (--) evdev: Logitech USB Receiver: Found relative axes
[ 18.231] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[ 18.231] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 18.231] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[ 18.231] (--) evdev: Logitech USB Receiver: Found keys
[ 18.231] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 18.231] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 18.231] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 18.231] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 18.231] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 18.231] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb5/5-5/5-5:1.1/input/input11/event11"
[ 18.231] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 12)
[ 18.231] (**) Option "xkb_rules" "evdev"
[ 18.231] (**) Option "xkb_model" "pc105"
[ 18.231] (**) Option "xkb_layout" "it"
[ 18.232] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 18.232] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 18.232] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 18.232] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 18.232] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 18.232] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 18.232] (II) config/udev: Adding input device HDA ATI SB Mic (/dev/input/event7)
[ 18.232] (II) No input driver specified, ignoring this device.
[ 18.232] (II) This device may have been added with another device file.
[ 18.233] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event8)
[ 18.233] (II) No input driver specified, ignoring this device.
[ 18.233] (II) This device may have been added with another device file.
[ 18.233] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 18.233] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 18.233] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 18.233] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.233] (**) AT Translated Set 2 keyboard: always reports core events
[ 18.233] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[ 18.233] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 18.233] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 18.233] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 18.233] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 18.233] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[ 18.233] (**) Option "xkb_rules" "evdev"
[ 18.233] (**) Option "xkb_model" "pc105"
[ 18.233] (**) Option "xkb_layout" "it"
[ 18.234] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event14)
[ 18.234] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 18.234] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 18.234] (II) LoadModule: "synaptics"
[ 18.234] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 18.234] (II) Module synaptics: vendor="X.Org Foundation"
[ 18.234] compiled for 1.11.3, module version = 1.6.2
[ 18.234] Module class: X.Org XInput Driver
[ 18.234] ABI class: X.Org XInput driver, version 16.0
[ 18.234] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 18.234] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 18.234] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 18.234] (**) Option "Device" "/dev/input/event14"
[ 18.240] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 18.240] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[ 18.240] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5672
[ 18.240] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4550
[ 18.240] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 18.240] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 18.240] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[ 18.240] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 18.240] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 18.240] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 18.244] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input14/event14"
[ 18.244] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14)
[ 18.244] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 18.244] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 18.244] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.038
[ 18.244] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 18.244] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 18.244] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 18.244] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 18.244] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 18.245] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 18.245] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 18.245] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event5)
[ 18.245] (II) No input driver specified, ignoring this device.
[ 18.245] (II) This device may have been added with another device file.
[ 18.245] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[ 18.245] (II) No input driver specified, ignoring this device.
[ 18.245] (II) This device may have been added with another device file.
[ 18.247] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event13)
[ 18.247] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 18.247] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[ 18.247] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.247] (**) HP WMI hotkeys: always reports core events
[ 18.247] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event13"
[ 18.247] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[ 18.247] (--) evdev: HP WMI hotkeys: Found keys
[ 18.247] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[ 18.247] (**) Option "config_info" "udev:/sys/devices/virtual/input/input13/event13"
[ 18.247] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 15)
[ 18.247] (**) Option "xkb_rules" "evdev"
[ 18.247] (**) Option "xkb_model" "pc105"
[ 18.247] (**) Option "xkb_layout" "it"
[ 18.460] (II) fglrx(0): System Power Source: AC
[ 18.460] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 19.079] (II) fglrx(0): EDID vendor "SEC", prod id 16977
[ 19.079] (II) fglrx(0): Printing DDC gathered Modelines:
[ 19.079] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 19.679] (II) fglrx(0): EDID vendor "SEC", prod id 16977
[ 19.679] (II) fglrx(0): Printing DDC gathered Modelines:
[ 19.679] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 32.519] (II) fglrx(0): EDID vendor "SEC", prod id 16977
[ 32.519] (II) fglrx(0): Printing DDC gathered Modelines:
[ 32.519] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 32.979] (II) fglrx(0): EDID vendor "SEC", prod id 16977
[ 32.979] (II) fglrx(0): Printing DDC gathered Modelines:
[ 32.979] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 33.671] (II) fglrx(0): EDID vendor "SEC", prod id 16977
[ 33.671] (II) fglrx(0): Printing DDC gathered Modelines:
[ 33.671] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 33.752] (II) fglrx(0): EDID vendor "SEC", prod id 16977
[ 33.752] (II) fglrx(0): Printing DDC gathered Modelines:
[ 33.752] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 33.794] (II) fglrx(0): EDID vendor "SEC", prod id 16977
[ 33.794] (II) fglrx(0): Printing DDC gathered Modelines:
[ 33.794] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 33.923] (II) fglrx(0): EDID vendor "SEC", prod id 16977
[ 33.923] (II) fglrx(0): Printing DDC gathered Modelines:
[ 33.923] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 33.957] (II) fglrx(0): EDID vendor "SEC", prod id 16977
[ 33.958] (II) fglrx(0): Printing DDC gathered Modelines:
[ 33.958] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 33.992] (II) fglrx(0): EDID vendor "SEC", prod id 16977
[ 33.992] (II) fglrx(0): Printing DDC gathered Modelines:
[ 33.992] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 34.026] (II) fglrx(0): EDID vendor "SEC", prod id 16977
[ 34.026] (II) fglrx(0): Printing DDC gathered Modelines:
[ 34.026] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 34.071] (II) fglrx(0): EDID vendor "SEC", prod id 16977
[ 34.071] (II) fglrx(0): Printing DDC gathered Modelines:
[ 34.071] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 34.097] (II) fglrx(0): EDID vendor "SEC", prod id 16977
[ 34.097] (II) fglrx(0): Printing DDC gathered Modelines:
[ 34.097] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 34.113] (II) fglrx(0): EDID vendor "SEC", prod id 16977
[ 34.113] (II) fglrx(0): Printing DDC gathered Modelines:
[ 34.113] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 34.139] (II) fglrx(0): EDID vendor "SEC", prod id 16977
[ 34.139] (II) fglrx(0): Printing DDC gathered Modelines:
[ 34.139] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 34.166] (II) fglrx(0): EDID vendor "SEC", prod id 16977
[ 34.166] (II) fglrx(0): Printing DDC gathered Modelines:
[ 34.166] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 34.189] (II) fglrx(0): EDID vendor "SEC", prod id 16977
[ 34.189] (II) fglrx(0): Printing DDC gathered Modelines:
[ 34.189] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 34.212] (II) fglrx(0): EDID vendor "SEC", prod id 16977
[ 34.212] (II) fglrx(0): Printing DDC gathered Modelines:
[ 34.212] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 34.256] (II) fglrx(0): EDID vendor "SEC", prod id 16977
[ 34.256] (II) fglrx(0): Printing DDC gathered Modelines:
[ 34.256] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 34.310] (II) fglrx(0): EDID vendor "SEC", prod id 16977
[ 34.310] (II) fglrx(0): Printing DDC gathered Modelines:
[ 34.310] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 34.384] (II) fglrx(0): EDID vendor "SEC", prod id 16977
[ 34.384] (II) fglrx(0): Printing DDC gathered Modelines:
[ 34.384] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 34.406] (II) fglrx(0): EDID vendor "SEC", prod id 16977
[ 34.406] (II) fglrx(0): Printing DDC gathered Modelines:
[ 34.406] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 34.435] (II) fglrx(0): EDID vendor "SEC", prod id 16977
[ 34.435] (II) fglrx(0): Printing DDC gathered Modelines:
[ 34.435] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 34.465] (II) fglrx(0): EDID vendor "SEC", prod id 16977
[ 34.465] (II) fglrx(0): Printing DDC gathered Modelines:
[ 34.465] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 34.504] (II) fglrx(0): EDID vendor "SEC", prod id 16977
[ 34.504] (II) fglrx(0): Printing DDC gathered Modelines:
[ 34.504] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 34.568] (II) fglrx(0): EDID vendor "SEC", prod id 16977
[ 34.568] (II) fglrx(0): Printing DDC gathered Modelines:
[ 34.568] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 34.608] (II) fglrx(0): EDID vendor "SEC", prod id 16977
[ 34.608] (II) fglrx(0): Printing DDC gathered Modelines:
[ 34.608] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 34.737] (II) fglrx(0): EDID vendor "SEC", prod id 16977
[ 34.737] (II) fglrx(0): Printing DDC gathered Modelines:
[ 34.737] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 34.961] (II) fglrx(0): EDID vendor "SEC", prod id 16977
[ 34.961] (II) fglrx(0): Printing DDC gathered Modelines:
[ 34.961] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 35.053] (II) fglrx(0): EDID vendor "SEC", prod id 16977
[ 35.053] (II) fglrx(0): Printing DDC gathered Modelines:
[ 35.053] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 35.128] (II) fglrx(0): EDID vendor "SEC", prod id 16977
[ 35.128] (II) fglrx(0): Printing DDC gathered Modelines:
[ 35.128] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 35.203] (II) fglrx(0): EDID vendor "SEC", prod id 16977
[ 35.203] (II) fglrx(0): Printing DDC gathered Modelines:
[ 35.203] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 35.319] (II) fglrx(0): EDID vendor "SEC", prod id 16977
[ 35.319] (II) fglrx(0): Printing DDC gathered Modelines:
[ 35.319] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 35.432] (II) fglrx(0): EDID vendor "SEC", prod id 16977
[ 35.432] (II) fglrx(0): Printing DDC gathered Modelines:
[ 35.432] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 53.724] (II) fglrx(0): EDID vendor "SEC", prod id 16977
[ 53.724] (II) fglrx(0): Printing DDC gathered Modelines:
[ 53.724] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 59.931] (II) XKB: reuse xkmfile /var/lib/xkb/server-D69B3F218E38E591130D7699406A1961AEEE0C6B.xkm
[ 9970.756] (II) config/udev: removing device Logitech USB Receiver
[ 9970.757] (II) evdev: Logitech USB Receiver: Close
[ 9970.757] (II) UnloadModule: "evdev"
[ 9970.757] (II) Unloading evdev
[ 9970.788] (II) config/udev: removing device Logitech USB Receiver
[ 9970.789] (II) evdev: Logitech USB Receiver: Close
[ 9970.789] (II) UnloadModule: "evdev"
[ 9970.789] (II) Unloading evdev
[ 10011.728] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event10)
[ 10011.728] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 10011.728] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 10011.728] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 10011.728] (**) Logitech USB Receiver: always reports core events
[ 10011.728] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event10"
[ 10011.728] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[ 10011.728] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[ 10011.728] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 10011.728] (--) evdev: Logitech USB Receiver: Found relative axes
[ 10011.728] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 10011.728] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 10011.728] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 10011.728] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 10011.728] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 10011.728] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb5/5-5/5-5:1.0/input/input15/event10"
[ 10011.728] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 11)
[ 10011.729] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 10011.729] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 10011.729] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 10011.729] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 10011.729] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 10011.730] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 10011.730] (II) No input driver specified, ignoring this device.
[ 10011.730] (II) This device may have been added with another device file.
[ 10011.765] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event11)
[ 10011.765] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 10011.765] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 10011.765] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 10011.765] (**) Logitech USB Receiver: always reports core events
[ 10011.765] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event11"
[ 10011.765] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[ 10011.765] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[ 10011.765] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 10011.765] (--) evdev: Logitech USB Receiver: Found relative axes
[ 10011.765] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[ 10011.765] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 10011.765] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[ 10011.765] (--) evdev: Logitech USB Receiver: Found keys
[ 10011.765] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 10011.765] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 10011.765] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 10011.765] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 10011.765] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 10011.765] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb5/5-5/5-5:1.1/input/input16/event11"
[ 10011.765] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 12)
[ 10011.765] (**) Option "xkb_rules" "evdev"
[ 10011.765] (**) Option "xkb_model" "pc105"
[ 10011.765] (**) Option "xkb_layout" "it"
[ 10011.765] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 10011.765] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 10011.766] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 10011.766] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 10011.766] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 10011.766] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 10016.439] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 10020.316] (II) config/udev: removing device Logitech USB Receiver
[ 10020.317] (II) evdev: Logitech USB Receiver: Close
[ 10020.317] (II) UnloadModule: "evdev"
[ 10020.317] (II) Unloading evdev
[ 10020.348] (II) config/udev: removing device Logitech USB Receiver
[ 10020.349] (II) evdev: Logitech USB Receiver: Close
[ 10020.349] (II) UnloadModule: "evdev"
[ 10020.349] (II) Unloading evdev
[ 10125.906] (II) UnloadModule: "synaptics"
[ 10125.907] (II) Unloading synaptics
[ 10125.907] (II) evdev: HP WMI hotkeys: Close
[ 10125.907] (II) UnloadModule: "evdev"
[ 10125.907] (II) Unloading evdev
[ 10125.907] (II) evdev: AT Translated Set 2 keyboard: Close
[ 10125.907] (II) UnloadModule: "evdev"
[ 10125.907] (II) Unloading evdev
[ 10125.907] (II) evdev: 2SF022: Close
[ 10125.907] (II) UnloadModule: "evdev"
[ 10125.907] (II) Unloading evdev
[ 10125.907] (II) evdev: Power Button: Close
[ 10125.907] (II) UnloadModule: "evdev"
[ 10125.907] (II) Unloading evdev
[ 10125.907] (II) evdev: Video Bus: Close
[ 10125.907] (II) UnloadModule: "evdev"
[ 10125.907] (II) Unloading evdev
[ 10125.907] (II) evdev: Video Bus: Close
[ 10125.907] (II) UnloadModule: "evdev"
[ 10125.907] (II) Unloading evdev
[ 10125.907] (II) evdev: Power Button: Close
[ 10125.907] (II) UnloadModule: "evdev"
[ 10125.907] (II) Unloading evdev
[ 10125.910] (II) fglrx(0): Shutdown CMMQS
[ 10125.910] (II) fglrx(0): [uki] removed 1 reserved context for kernel
[ 10125.910] (II) fglrx(0): [uki] unmapping 8192 bytes of SAREA 0x2000 at 0x7f1be5e1e000
[ 10125.937] (II) fglrx(0): Interrupt handler Shutdown.
[ 10126.232] ddxSigGiveUp: Closing log
[ 10126.232] Server terminated successfully (0). Closing log file.
-
Marcico
- Prode Principiante
- Messaggi: 111
- Iscrizione: mercoledì 22 febbraio 2012, 10:02
- Distribuzione: Ubuntu 12.04 LTS x86_64
- Località: Milano
Re: Ubuntu nn si spegne..
Idem per il 4°
Codice: Seleziona tutto
[ 0.259565] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.259695] pnp 00:02: [irq 0 disabled]
[ 0.259708] pnp 00:02: [irq 8]
[ 0.259710] pnp 00:02: [mem 0xfed00000-0xfed003ff]
[ 0.259736] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.259774] pnp 00:03: [io 0x0000-0x000f]
[ 0.259776] pnp 00:03: [io 0x0081-0x008f]
[ 0.259778] pnp 00:03: [io 0x00c0-0x00df]
[ 0.259780] pnp 00:03: [dma 4]
[ 0.259811] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.259818] pnp 00:04: [io 0x00f0-0x00fe]
[ 0.259823] pnp 00:04: [irq 13]
[ 0.259853] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.259884] pnp 00:05: [io 0x0070-0x0071]
[ 0.259913] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.259920] pnp 00:06: [io 0x0061]
[ 0.259950] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.259959] pnp 00:07: [io 0x0060]
[ 0.259961] pnp 00:07: [io 0x0064]
[ 0.259989] pnp 00:07: [irq 1]
[ 0.260063] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.260100] pnp 00:08: [irq 12]
[ 0.260137] pnp 00:08: Plug and Play ACPI device, IDs SYN1e1e SYN1e00 SYN0002 PNP0f13 (active)
[ 0.260148] pnp 00:09: [io 0x0010-0x001f]
[ 0.260150] pnp 00:09: [io 0x002e-0x002f]
[ 0.260152] pnp 00:09: [io 0x0072-0x0073]
[ 0.260154] pnp 00:09: [io 0x0080]
[ 0.260155] pnp 00:09: [io 0x00b0-0x00b1]
[ 0.260157] pnp 00:09: [io 0x0092]
[ 0.260159] pnp 00:09: [io 0x0400-0x04cf]
[ 0.260161] pnp 00:09: [io 0x04d0-0x04d1]
[ 0.260163] pnp 00:09: [io 0x04d6]
[ 0.260164] pnp 00:09: [io 0x0550]
[ 0.260166] pnp 00:09: [io 0x0680-0x06ff]
[ 0.260168] pnp 00:09: [io 0x077a]
[ 0.260169] pnp 00:09: [io 0x0c00-0x0c01]
[ 0.260171] pnp 00:09: [io 0x0c14]
[ 0.260173] pnp 00:09: [io 0x0c50-0x0c52]
[ 0.260175] pnp 00:09: [io 0x0c6c]
[ 0.260176] pnp 00:09: [io 0x0c6f]
[ 0.260178] pnp 00:09: [io 0x0cd0-0x0cdb]
[ 0.260180] pnp 00:09: [io 0x0380-0x0387]
[ 0.260240] system 00:09: [io 0x0400-0x04cf] has been reserved
[ 0.260245] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 0.260249] system 00:09: [io 0x04d6] has been reserved
[ 0.260253] system 00:09: [io 0x0550] has been reserved
[ 0.260257] system 00:09: [io 0x0680-0x06ff] has been reserved
[ 0.260261] system 00:09: [io 0x077a] has been reserved
[ 0.260265] system 00:09: [io 0x0c00-0x0c01] has been reserved
[ 0.260270] system 00:09: [io 0x0c14] has been reserved
[ 0.260274] system 00:09: [io 0x0c50-0x0c52] has been reserved
[ 0.260278] system 00:09: [io 0x0c6c] has been reserved
[ 0.260282] system 00:09: [io 0x0c6f] has been reserved
[ 0.260286] system 00:09: [io 0x0cd0-0x0cdb] has been reserved
[ 0.260290] system 00:09: [io 0x0380-0x0387] has been reserved
[ 0.260295] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.260335] pnp 00:0a: [mem 0x000e0000-0x000fffff]
[ 0.260337] pnp 00:0a: [mem 0xffe00000-0xffffffff]
[ 0.260387] system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.260392] system 00:0a: [mem 0xffe00000-0xffffffff] has been reserved
[ 0.260397] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.260438] pnp 00:0b: [irq 22]
[ 0.260475] pnp 00:0b: Plug and Play ACPI device, IDs HPQ0004 (active)
[ 0.260919] pnp: PnP ACPI: found 12 devices
[ 0.260928] ACPI: ACPI bus type pnp unregistered
[ 0.267381] pci 0000:04:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
[ 0.267393] PCI: max bus depth: 1 pci_try_num: 2
[ 0.267461] pci 0000:00:06.0: BAR 14: assigned [mem 0xf0600000-0xf06fffff]
[ 0.267468] pci 0000:00:06.0: BAR 14: assigned [mem 0xf0600000-0xf0afffff]
[ 0.267474] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.267478] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
[ 0.267483] pci 0000:00:01.0: bridge window [mem 0xf0300000-0xf04fffff]
[ 0.267488] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.267496] pci 0000:02:00.0: BAR 6: assigned [mem 0xf0240000-0xf025ffff pref]
[ 0.267501] pci 0000:00:02.0: PCI bridge to [bus 02-02]
[ 0.267505] pci 0000:00:02.0: bridge window [io 0x3000-0x3fff]
[ 0.267510] pci 0000:00:02.0: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.267515] pci 0000:00:02.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.267521] pci 0000:00:05.0: PCI bridge to [bus 03-03]
[ 0.267526] pci 0000:00:05.0: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.267533] pci 0000:04:00.0: BAR 6: assigned [mem 0xf0010000-0xf001ffff pref]
[ 0.267537] pci 0000:00:06.0: PCI bridge to [bus 04-04]
[ 0.267541] pci 0000:00:06.0: bridge window [io 0x2000-0x2fff]
[ 0.267546] pci 0000:00:06.0: bridge window [mem 0xf0600000-0xf0afffff]
[ 0.267551] pci 0000:00:06.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.267557] pci 0000:00:14.4: PCI bridge to [bus 05-05]
[ 0.267612] pci 0000:00:01.0: setting latency timer to 64
[ 0.267631] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.267636] pci 0000:00:02.0: setting latency timer to 64
[ 0.267644] pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.267649] pci 0000:00:05.0: setting latency timer to 64
[ 0.267654] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.267659] pci 0000:00:06.0: setting latency timer to 64
[ 0.267666] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.267669] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.267671] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.267673] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.267675] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.267678] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.267680] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.267682] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.267684] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
[ 0.267687] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
[ 0.267689] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
[ 0.267691] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
[ 0.267693] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
[ 0.267696] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
[ 0.267698] pci_bus 0000:00: resource 18 [mem 0xd0000000-0xf6ffffff]
[ 0.267700] pci_bus 0000:00: resource 19 [mem 0xf8000000-0xfed3ffff]
[ 0.267702] pci_bus 0000:00: resource 20 [mem 0xfed45000-0xffffffff]
[ 0.267705] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 0.267707] pci_bus 0000:01: resource 1 [mem 0xf0300000-0xf04fffff]
[ 0.267710] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.267713] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.267715] pci_bus 0000:02: resource 1 [mem 0xf0200000-0xf02fffff]
[ 0.267718] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.267721] pci_bus 0000:03: resource 1 [mem 0xf0100000-0xf01fffff]
[ 0.267724] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
[ 0.267726] pci_bus 0000:04: resource 1 [mem 0xf0600000-0xf0afffff]
[ 0.267729] pci_bus 0000:04: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.267732] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.267734] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.267736] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.267739] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.267741] pci_bus 0000:05: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.267744] pci_bus 0000:05: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.267747] pci_bus 0000:05: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.267749] pci_bus 0000:05: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.267752] pci_bus 0000:05: resource 12 [mem 0x000d8000-0x000dbfff]
[ 0.267754] pci_bus 0000:05: resource 13 [mem 0x000dc000-0x000dffff]
[ 0.267757] pci_bus 0000:05: resource 14 [mem 0x000e0000-0x000e3fff]
[ 0.267759] pci_bus 0000:05: resource 15 [mem 0x000e4000-0x000e7fff]
[ 0.267762] pci_bus 0000:05: resource 16 [mem 0x000e8000-0x000ebfff]
[ 0.267764] pci_bus 0000:05: resource 17 [mem 0x000ec000-0x000effff]
[ 0.267767] pci_bus 0000:05: resource 18 [mem 0xd0000000-0xf6ffffff]
[ 0.267769] pci_bus 0000:05: resource 19 [mem 0xf8000000-0xfed3ffff]
[ 0.267772] pci_bus 0000:05: resource 20 [mem 0xfed45000-0xffffffff]
[ 0.267814] NET: Registered protocol family 2
[ 0.267975] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.269241] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.272316] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.272689] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.272695] TCP reno registered
[ 0.272710] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.272753] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.272868] NET: Registered protocol family 1
[ 0.272881] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[ 0.272910] pci 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.364082] pci 0000:00:12.0: PCI INT A disabled
[ 0.364105] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.380077] pci 0000:00:12.2: PCI INT B disabled
[ 0.380100] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.987844] pci 0000:00:13.0: PCI INT A disabled
[ 0.987868] pci 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.000070] pci 0000:00:13.2: PCI INT B disabled
[ 1.000101] pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.043829] Freeing initrd memory: 13864k freed
[ 1.092086] pci 0000:00:14.5: PCI INT C disabled
[ 1.092107] pci 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.184154] pci 0000:00:16.0: PCI INT A disabled
[ 1.184177] pci 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.200153] pci 0000:00:16.2: PCI INT B disabled
[ 1.200180] pci 0000:01:05.0: Boot video device
[ 1.200201] PCI: CLS 64 bytes, default 64
[ 1.201622] PCI-DMA: Disabling AGP.
[ 1.201723] PCI-DMA: aperture base @ c4000000 size 65536 KB
[ 1.201727] PCI-DMA: using GART IOMMU.
[ 1.201731] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.204864] Simple Boot Flag at 0x44 set to 0x1
[ 1.205194] IBS: LVT offset 1 assigned
[ 1.205211] perf: AMD IBS detected (0x0000001f)
[ 1.205407] audit: initializing netlink socket (disabled)
[ 1.205424] type=2000 audit(1342376192.204:1): initialized
[ 1.237651] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.259624] VFS: Disk quotas dquot_6.5.2
[ 1.259687] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.260326] fuse init (API version 7.17)
[ 1.260499] msgmni has been set to 7389
[ 1.261042] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.261151] io scheduler noop registered
[ 1.261161] io scheduler deadline registered
[ 1.261231] io scheduler cfq registered (default)
[ 1.261541] pcieport 0000:00:02.0: setting latency timer to 64
[ 1.261576] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 1.261701] pcieport 0000:00:05.0: setting latency timer to 64
[ 1.261725] pcieport 0000:00:05.0: irq 41 for MSI/MSI-X
[ 1.261869] pcieport 0000:00:06.0: setting latency timer to 64
[ 1.261892] pcieport 0000:00:06.0: irq 42 for MSI/MSI-X
[ 1.262053] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.262088] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.262981] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 1.263832] ACPI: AC Adapter [ACAD] (on-line)
[ 1.263981] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 1.263990] ACPI: Power Button [PWRB]
[ 1.264098] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 1.264606] ACPI: Lid Switch [LID]
[ 1.264697] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.264705] ACPI: Power Button [PWRF]
[ 1.264970] ACPI: processor limited to max C-state 1
[ 1.266936] [Firmware Bug]: Invalid critical threshold (0)
[ 1.268483] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.268492] ACPI: Thermal Zone [THRM] (58 C)
[ 1.268540] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 1.268557] ACPI: Battery Slot [BAT0] (battery present)
[ 1.268587] ERST: Table is not found!
[ 1.268590] GHES: HEST is not enabled!
[ 1.268800] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.291181] ACPI: Battery Slot [BAT0] (battery present)
[ 1.341207] Linux agpgart interface v0.103
[ 1.343686] brd: module loaded
[ 1.345007] loop: module loaded
[ 1.345285] ahci 0000:00:11.0: version 3.0
[ 1.345314] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.345489] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 3 ports 3 Gbps 0xb impl SATA mode
[ 1.345496] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
[ 1.346106] scsi0 : ahci
[ 1.346298] scsi1 : ahci
[ 1.346449] scsi2 : ahci
[ 1.346530] scsi3 : ahci
[ 1.346578] ata1: SATA max UDMA/133 abar m1024@0xf0508000 port 0xf0508100 irq 19
[ 1.346584] ata2: SATA max UDMA/133 abar m1024@0xf0508000 port 0xf0508180 irq 19
[ 1.346588] ata3: DUMMY
[ 1.346592] ata4: SATA max UDMA/133 abar m1024@0xf0508000 port 0xf0508280 irq 19
[ 1.346993] Fixed MDIO Bus: probed
[ 1.347017] tun: Universal TUN/TAP device driver, 1.6
[ 1.347020] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.347183] PPP generic driver version 2.4.2
[ 1.347331] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.347390] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.347419] ehci_hcd 0000:00:12.2: setting latency timer to 64
[ 1.347422] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.347496] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.347507] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.347528] QUIRK: Enable AMD PLL fix
[ 1.347540] ehci_hcd 0000:00:12.2: debug port 1
[ 1.347565] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf0508600
[ 1.356157] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.356343] hub 1-0:1.0: USB hub found
[ 1.356348] hub 1-0:1.0: 5 ports detected
[ 1.356576] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.356605] ehci_hcd 0000:00:13.2: setting latency timer to 64
[ 1.356609] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.356697] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.356707] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.356732] ehci_hcd 0000:00:13.2: debug port 1
[ 1.356749] ehci_hcd 0000:00:13.2: irq 17, io mem 0xf0508500
[ 1.368166] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.368346] hub 2-0:1.0: USB hub found
[ 1.368352] hub 2-0:1.0: 5 ports detected
[ 1.368588] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.368617] ehci_hcd 0000:00:16.2: setting latency timer to 64
[ 1.368621] ehci_hcd 0000:00:16.2: EHCI Host Controller
[ 1.368707] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 1.368717] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.368742] ehci_hcd 0000:00:16.2: debug port 1
[ 1.368758] ehci_hcd 0000:00:16.2: irq 17, io mem 0xf0508400
[ 1.380169] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 1.380350] hub 3-0:1.0: USB hub found
[ 1.380357] hub 3-0:1.0: 4 ports detected
[ 1.380549] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.380712] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.380786] ohci_hcd 0000:00:12.0: setting latency timer to 64
[ 1.380789] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.380932] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 1.380969] ohci_hcd 0000:00:12.0: irq 18, io mem 0xf0507000
[ 1.440329] hub 4-0:1.0: USB hub found
[ 1.440372] hub 4-0:1.0: 5 ports detected
[ 1.440549] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.440578] ohci_hcd 0000:00:13.0: setting latency timer to 64
[ 1.440582] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.440665] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.440689] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf0506000
[ 1.500333] hub 5-0:1.0: USB hub found
[ 1.500368] hub 5-0:1.0: 5 ports detected
[ 1.500540] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.500572] ohci_hcd 0000:00:14.5: setting latency timer to 64
[ 1.500576] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.500664] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
[ 1.500687] ohci_hcd 0000:00:14.5: irq 18, io mem 0xf0505000
[ 1.560378] hub 6-0:1.0: USB hub found
[ 1.560390] hub 6-0:1.0: 2 ports detected
[ 1.560556] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.560586] ohci_hcd 0000:00:16.0: setting latency timer to 64
[ 1.560590] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 1.560682] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
[ 1.560705] ohci_hcd 0000:00:16.0: irq 18, io mem 0xf0504000
[ 1.620370] hub 7-0:1.0: USB hub found
[ 1.620383] hub 7-0:1.0: 4 ports detected
[ 1.620508] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.620604] usbcore: registered new interface driver libusual
[ 1.620648] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.639070] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.639078] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.639410] mousedev: PS/2 mouse device common for all mice
[ 1.640914] rtc_cmos 00:05: RTC can wake from S4
[ 1.641052] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.641079] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[ 1.641164] device-mapper: uevent: version 1.0.3
[ 1.641346] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 1.641359] cpuidle: using governor ladder
[ 1.641362] cpuidle: using governor menu
[ 1.641365] EFI Variables Facility v0.08 2004-May-17
[ 1.641577] TCP cubic registered
[ 1.641675] NET: Registered protocol family 10
[ 1.642118] NET: Registered protocol family 17
[ 1.642124] Registering the dns_resolver key type
[ 1.642331] PM: Hibernation image not present or could not be loaded.
[ 1.642343] registered taskstats version 1
[ 1.660125] Magic number: 4:761:291
[ 1.660175] tty tty24: hash matches
[ 1.660248] rtc_cmos 00:05: setting system clock to 2012-07-15 18:16:33 UTC (1342376193)
[ 1.660259] powernow-k8: Found 1 AMD Athlon(tm) II P340 Dual-Core Processor (2 cpu cores) (version 2.20.00)
[ 1.660297] powernow-k8: 0 : pstate 0 (2200 MHz)
[ 1.660301] powernow-k8: 1 : pstate 1 (1600 MHz)
[ 1.660304] powernow-k8: 2 : pstate 2 (800 MHz)
[ 1.660479] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.660483] EDD information not available.
[ 1.664199] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.665332] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.672145] usb 1-3: new high-speed USB device number 2 using ehci_hcd
[ 1.840100] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.843047] ata1.00: ATA-8: WDC WD3200BEKT-60PVMT0, 01.01A01, max UDMA/133
[ 1.843056] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.844081] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.845657] ata1.00: configured for UDMA/133
[ 1.845918] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEKT-6 01.0 PQ: 0 ANSI: 5
[ 1.846108] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.846142] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.846261] sd 0:0:0:0: [sda] Write Protect is off
[ 1.846266] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.846307] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.847772] ata2.00: ATAPI: hp DVDRAM GT31L, MR52, max UDMA/100
[ 1.851769] ata2.00: configured for UDMA/100
[ 1.856805] scsi 1:0:0:0: CD-ROM hp DVDRAM GT31L MR52 PQ: 0 ANSI: 5
[ 1.860879] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.860889] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.861071] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.861177] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.899184] sda: sda1 sda2 sda3 sda4
[ 1.899836] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.901523] Freeing unused kernel memory: 920k freed
[ 1.901803] Write protecting the kernel read-only data: 12288k
[ 1.907663] Freeing unused kernel memory: 1616k freed
[ 1.912516] Freeing unused kernel memory: 1200k freed
[ 1.936712] udevd[130]: starting version 175
[ 1.988128] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.988165] r8169 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.988205] r8169 0000:04:00.0: setting latency timer to 64
[ 1.988255] r8169 0000:04:00.0: irq 43 for MSI/MSI-X
[ 1.988684] r8169 0000:04:00.0: eth0: RTL8168d/8111d at 0xffffc90000666000, 78:ac:c0:56:aa:00, XID 083000c0 IRQ 43
[ 1.988691] r8169 0000:04:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 2.204055] Refined TSC clocksource calibration: 2194.504 MHz.
[ 2.204068] Switching to clocksource tsc
[ 2.371160] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 2.600204] usb 2-3: new high-speed USB device number 2 using ehci_hcd
[ 2.960133] usb 3-2: new high-speed USB device number 2 using ehci_hcd
[ 3.372128] usb 5-5: new full-speed USB device number 2 using ohci_hcd
[ 3.471040] Initializing USB Mass Storage driver...
[ 3.471113] usbcore: registered new interface driver usb-storage
[ 3.471117] USB Mass Storage support registered.
[ 15.320762] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.344603] udevd[362]: starting version 175
[ 15.362110] Adding 4194300k swap on /dev/sda3. Priority:-1 extents:1 across:4194300k
[ 15.383410] lp: driver loaded but no devices found
[ 15.435764] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 15.490931] cfg80211: Calling CRDA to update world regulatory domain
[ 15.496039] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 15.496045] Disabling lock debugging due to kernel taint
[ 15.506325] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro
[ 15.573833] wmi: Mapper loaded
[ 15.600338] hp_accel: laptop model unknown, using default axes configuration
[ 15.600931] lis3lv02d: 8 bits sensor found
[ 15.632220] ath9k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 15.632232] ath9k 0000:03:00.0: setting latency timer to 64
[ 15.633175] [fglrx] Maximum main memory to use for locked dma buffers: 3540 MBytes.
[ 15.633304] [fglrx] vendor: 1002 device: 9712 count: 1
[ 15.633532] [fglrx] vendor: 1002 device: 68e0 count: 2
[ 15.633858] [fglrx] ioport: bar 1, base 0x4000, size: 0x100
[ 15.633874] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 15.633879] pci 0000:01:05.0: setting latency timer to 64
[ 15.634141] [fglrx] ioport: bar 4, base 0x3000, size: 0x100
[ 15.634149] pci 0000:02:00.0: enabling device (0000 -> 0003)
[ 15.634153] pci 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 15.634158] pci 0000:02:00.0: setting latency timer to 64
[ 15.634397] [fglrx] Kernel PAT support is enabled
[ 15.634424] [fglrx] module loaded - fglrx 8.96.4 [Mar 12 2012] with 2 minors
[ 15.657302] type=1400 audit(1342369007.492:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=581 comm="apparmor_parser"
[ 15.657846] type=1400 audit(1342369007.492:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=581 comm="apparmor_parser"
[ 15.658123] type=1400 audit(1342369007.492:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=581 comm="apparmor_parser"
[ 15.683736] ath: EEPROM regdomain: 0x60
[ 15.683740] ath: EEPROM indicates we should expect a direct regpair map
[ 15.683743] ath: Country alpha2 being used: 00
[ 15.683745] ath: Regpair used: 0x60
[ 15.683749] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 15.683752] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 15.683754] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 15.683757] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 15.683759] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 15.683761] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 15.683763] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 15.683766] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 15.683768] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 15.683770] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 15.683772] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 15.683775] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 15.683777] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 15.683779] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 15.683781] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 15.683784] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 15.683786] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 15.683789] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 15.683790] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 15.683793] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 15.683795] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 15.683798] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 15.683800] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 15.683802] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 15.683804] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 15.683807] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 15.683809] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 15.683811] cfg80211: 2474000 KHz - 2494000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 15.686004] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 15.689452] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 15.690037] Registered led device: ath9k-phy0
[ 15.690045] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90002600000, irq=17
[ 15.741886] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SMBI [io 0xb00-0xb0f]
[ 15.741890] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 15.742563] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 15.742730] SP5100 TCO timer: mmio address 0xb8fe00 already in use
[ 15.756105] acpi device:04: registered as cooling_device2
[ 15.756319] MCE: In-kernel MCE decoding enabled.
[ 15.759062] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input4
[ 15.759869] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 15.761009] EDAC MC: Ver: 2.1.0
[ 15.778995] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input5
[ 15.779179] Registered led device: hp::hddprotect
[ 15.779197] hp_accel: driver loaded
[ 15.805087] AMD64 EDAC driver v3.4.0
[ 15.811776] EDAC amd64: DRAM ECC disabled.
[ 15.811786] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 15.811787] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 15.811789] (Note that use of the override may cause unknown side effects.)
[ 15.823012] Bluetooth: Core ver 2.16
[ 15.823100] NET: Registered protocol family 31
[ 15.823102] Bluetooth: HCI device and connection manager initialized
[ 15.823106] Bluetooth: HCI socket layer initialized
[ 15.823108] Bluetooth: L2CAP socket layer initialized
[ 15.823114] Bluetooth: SCO socket layer initialized
[ 15.845091] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 15.845095] Bluetooth: BNEP filters: protocol multicast
[ 15.853215] ppdev: user-space parallel port driver
[ 15.866791] Bluetooth: RFCOMM TTY layer initialized
[ 15.866799] Bluetooth: RFCOMM socket layer initialized
[ 15.866801] Bluetooth: RFCOMM ver 1.11
[ 15.873837] type=1400 audit(1342369007.708:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=765 comm="apparmor_parser"
[ 15.879351] type=1400 audit(1342369007.712:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=765 comm="apparmor_parser"
[ 15.930732] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 15.930784] snd_hda_intel 0000:00:14.2: setting latency timer to 64
[ 15.935904] acpi device:09: registered as cooling_device3
[ 15.935993] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:06/LNXVIDEO:01/input/input6
[ 15.936152] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
[ 16.012363] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 16.012450] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 16.032055] snd_hda_intel 0000:02:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 16.032141] snd_hda_intel 0000:02:00.1: irq 44 for MSI/MSI-X
[ 16.032167] snd_hda_intel 0000:02:00.1: setting latency timer to 64
[ 16.058091] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 16.058170] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card1/input9
[ 16.090111] init: failsafe main process (804) killed by TERM signal
[ 16.182344] type=1400 audit(1342369008.016:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=956 comm="apparmor_parser"
[ 16.182536] usbcore: registered new interface driver uas
[ 16.186028] type=1400 audit(1342369008.020:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=955 comm="apparmor_parser"
[ 16.187439] type=1400 audit(1342369008.020:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=956 comm="apparmor_parser"
[ 16.187750] type=1400 audit(1342369008.020:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=956 comm="apparmor_parser"
[ 16.204975] type=1400 audit(1342369008.040:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=962 comm="apparmor_parser"
[ 16.231727] usb 3-2: USB disconnect, device number 2
[ 16.256170] scsi4 : usb-storage 3-2:1.0
[ 16.256516] usbcore: registered new interface driver ums-realtek
[ 16.257822] Linux video capture interface: v2.00
[ 16.264853] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 16.267228] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.0/usb5/5-5/5-5:1.0/input/input10
[ 16.267844] generic-usb 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:13.0-5/input0
[ 16.268303] uvcvideo: Found UVC 1.00 device 2SF022 (0bda:5801)
[ 16.268632] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 16.277138] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.0/usb5/5-5/5-5:1.1/input/input11
[ 16.278627] generic-usb 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.0-5/input1
[ 16.278820] usbcore: registered new interface driver usbhid
[ 16.278822] usbhid: USB HID core driver
[ 16.291942] input: 2SF022 as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/input/input12
[ 16.292094] usbcore: registered new interface driver uvcvideo
[ 16.292096] USB Video Class driver (1.1.1)
[ 16.300673] ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20110623/dsopcode-236)
[ 16.300682] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWMC] (Node ffff880118c4a320), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
[ 16.300693] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff880118c4a500), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
[ 16.300729] ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20110623/dsopcode-236)
[ 16.300735] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWMC] (Node ffff880118c4a320), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
[ 16.300742] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff880118c4a500), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
[ 16.300808] input: HP WMI hotkeys as /devices/virtual/input/input13
[ 16.306078] ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20110623/dsopcode-236)
[ 16.306086] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWMC] (Node ffff880118c4a320), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
[ 16.306097] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff880118c4a500), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
[ 16.312623] ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20110623/dsopcode-236)
[ 16.312633] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWMC] (Node ffff880118c4a320), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
[ 16.312647] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff880118c4a500), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
Re: Ubuntu nn si spegne..
credo che sarebbe meglio se tu riportassi il bug su bugzilla.kernel.org
We no longer think of chairs as technology; we just think of them as chairs. But there was a time when we hadn't worked out how many legs chairs should have, how tall they should be, and they would often 'crash' when we tried to use them.
-
dadexix86
- Tenace Tecnocrate
- Messaggi: 16364
- Iscrizione: domenica 22 marzo 2009, 19:58
- Desktop: Unity
- Distribuzione: Ubuntu 18.04 x86_64
- Località: Paris, France
Re: Ubuntu nn si spegne..
Sì, arrivati a questo punto direi che il consiglio di kimj è la cosa migliore da fare.
Nel frattempo prova utilizzando un altro kernel
Nel frattempo prova utilizzando un altro kernel
Non si dà supporto tramite mp in forum
L'utilizzo del tasto [Code] quando scrivi in forum risolve i 2/3 dei tuoi problemi
Per problemi con Skype rivolgersi qui. | Un Matematico Migrante
L'utilizzo del tasto [Code] quando scrivi in forum risolve i 2/3 dei tuoi problemi
Per problemi con Skype rivolgersi qui. | Un Matematico Migrante
Chi c’è in linea
Visualizzano questa sezione: 0 utenti iscritti e 11 ospiti