HD esterno non rilevato

[giok]

Salve, Ubuntu non mi riconosce un hd esterno (un hd in box di cui non conosco le caratteristiche). Non me lo rileva. Qualche consiglio?

Modifica post:
Il box è della Olidata e all'interno c'è un Western Digital Caviar SE da 500gb (WD5000AAJS).

[steff]

Hai provato con altri sistemi operativi? Posta

Codice: Seleziona tutto

dmesg

e

Codice: Seleziona tutto

sudo parted -l

dopo averlo inserito.

[giok]

Hai provato con altri sistemi operativi? Posta

Codice: Seleziona tutto

dmesg

e

Codice: Seleziona tutto

sudo parted -l

dopo averlo inserito.

Il risultato del primo comando non riesco a postarlo tutto. Il possibile:

Codice: Seleziona tutto

[    0.181528] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.181572] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.181616] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.181662] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.181707] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.181752] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.181891] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.181894] vgaarb: loaded
[    0.181896] vgaarb: bridge control possible 0000:01:00.0
[    0.182007] i2c-core: driver [aat2870] using legacy suspend method
[    0.182008] i2c-core: driver [aat2870] using legacy resume method
[    0.182087] SCSI subsystem initialized
[    0.182149] libata version 3.00 loaded.
[    0.182196] usbcore: registered new interface driver usbfs
[    0.182207] usbcore: registered new interface driver hub
[    0.182232] usbcore: registered new device driver usb
[    0.182321] PCI: Using ACPI for IRQ routing
[    0.182325] PCI: pci_cache_line_size set to 64 bytes
[    0.182390] reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
[    0.182393] reserve RAM buffer: 00000000dff90000 - 00000000dfffffff 
[    0.182496] NetLabel: Initializing
[    0.182498] NetLabel:  domain hash size = 128
[    0.182499] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.182510] NetLabel:  unlabeled traffic allowed by default
[    0.182551] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.182556] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.182560] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.188282] Switching to clocksource hpet
[    0.195982] AppArmor: AppArmor Filesystem Enabled
[    0.196046] pnp: PnP ACPI init
[    0.196068] ACPI: bus type pnp registered
[    0.196171] pnp 00:00: [bus 00-ff]
[    0.196175] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.196177] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.196180] pnp 00:00: [io  0x0d00-0xffff window]
[    0.196182] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.196184] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[    0.196187] pnp 00:00: [mem 0xe0000000-0xffffffff window]
[    0.196243] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.196252] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[    0.196303] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.196307] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.196338] pnp 00:02: [dma 4]
[    0.196340] pnp 00:02: [io  0x0000-0x000f]
[    0.196342] pnp 00:02: [io  0x0081-0x0083]
[    0.196344] pnp 00:02: [io  0x0087]
[    0.196346] pnp 00:02: [io  0x0089-0x008b]
[    0.196348] pnp 00:02: [io  0x008f]
[    0.196349] pnp 00:02: [io  0x00c0-0x00df]
[    0.196377] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.196387] pnp 00:03: [io  0x0070-0x0071]
[    0.196400] pnp 00:03: [irq 8]
[    0.196425] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.196433] pnp 00:04: [io  0x0061]
[    0.196461] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.196469] pnp 00:05: [io  0x00f0-0x00ff]
[    0.196475] pnp 00:05: [irq 13]
[    0.196505] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.196783] pnp 00:06: [irq 6]
[    0.196785] pnp 00:06: [dma 2]
[    0.196787] pnp 00:06: [io  0x03f0-0x03f5]
[    0.196789] pnp 00:06: [io  0x03f7]
[    0.196841] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.197183] pnp 00:07: [irq 7]
[    0.197186] pnp 00:07: [dma 3]
[    0.197187] pnp 00:07: [io  0x0378-0x037f]
[    0.197189] pnp 00:07: [io  0x0778-0x077f]
[    0.197329] pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.197358] pnp 00:08: [io  0x0000-0xffffffffffffffff disabled]
[    0.197360] pnp 00:08: [io  0x0000-0xffffffffffffffff disabled]
[    0.197362] pnp 00:08: [io  0x0290-0x0297]
[    0.197405] system 00:08: [io  0x0290-0x0297] has been reserved
[    0.197408] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.197477] pnp 00:09: [io  0x0010-0x001f]
[    0.197479] pnp 00:09: [io  0x0022-0x003f]
[    0.197481] pnp 00:09: [io  0x0044-0x005f]
[    0.197483] pnp 00:09: [io  0x0062-0x0063]
[    0.197485] pnp 00:09: [io  0x0065-0x006f]
[    0.197486] pnp 00:09: [io  0x0072-0x007f]
[    0.197488] pnp 00:09: [io  0x0080]
[    0.197490] pnp 00:09: [io  0x0084-0x0086]
[    0.197492] pnp 00:09: [io  0x0088]
[    0.197494] pnp 00:09: [io  0x008c-0x008e]
[    0.197496] pnp 00:09: [io  0x0090-0x009f]
[    0.197498] pnp 00:09: [io  0x00a2-0x00bf]
[    0.197499] pnp 00:09: [io  0x00e0-0x00ef]
[    0.197501] pnp 00:09: [io  0x04d0-0x04d1]
[    0.197503] pnp 00:09: [io  0x0800-0x087f]
[    0.197505] pnp 00:09: [io  0x0000-0xffffffffffffffff disabled]
[    0.197507] pnp 00:09: [io  0x0480-0x04bf]
[    0.197509] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
[    0.197511] pnp 00:09: [mem 0xfed20000-0xfed8ffff]
[    0.197565] system 00:09: [io  0x04d0-0x04d1] has been reserved
[    0.197568] system 00:09: [io  0x0800-0x087f] has been reserved
[    0.197570] system 00:09: [io  0x0480-0x04bf] has been reserved
[    0.197573] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.197576] system 00:09: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.197579] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.197639] pnp 00:0a: [mem 0xfed00000-0xfed003ff]
[    0.197672] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.197718] pnp 00:0b: [mem 0xffb00000-0xffbfffff]
[    0.197720] pnp 00:0b: [mem 0xfff00000-0xffffffff]
[    0.197748] pnp 00:0b: Plug and Play ACPI device, IDs INT0800 (active)
[    0.197786] pnp 00:0c: [mem 0xffc00000-0xffefffff]
[    0.197830] system 00:0c: [mem 0xffc00000-0xffefffff] has been reserved
[    0.197833] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.197885] pnp 00:0d: [io  0x0000-0xffffffffffffffff disabled]
[    0.197888] pnp 00:0d: [io  0x0000-0xffffffffffffffff disabled]
[    0.197890] pnp 00:0d: [mem 0xfec00000-0xfec00fff]
[    0.197892] pnp 00:0d: [mem 0xfee00000-0xfee00fff]
[    0.197936] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.197939] system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.197942] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.197968] pnp 00:0e: [io  0x0060]
[    0.197971] pnp 00:0e: [io  0x0064]
[    0.197976] pnp 00:0e: [irq 1]
[    0.198014] pnp 00:0e: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.198281] pnp 00:0f: [irq 4]
[    0.198284] pnp 00:0f: [dma 0 disabled]
[    0.198286] pnp 00:0f: [io  0x03f8-0x03ff]
[    0.198355] pnp 00:0f: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.198385] pnp 00:10: [mem 0xf0000000-0xf3ffffff]
[    0.198429] system 00:10: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.198432] system 00:10: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.198582] pnp 00:11: [mem 0x00000000-0x0009ffff]
[    0.198587] pnp 00:11: [mem 0x000c0000-0x000cffff]
[    0.198589] pnp 00:11: [mem 0x000e0000-0x000fffff]
[    0.198591] pnp 00:11: [mem 0x00100000-0xdfffffff]
[    0.198593] pnp 00:11: [mem 0x00000000-0xffffffffffffffff disabled]
[    0.198651] system 00:11: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.198654] system 00:11: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.198656] system 00:11: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.198659] system 00:11: [mem 0x00100000-0xdfffffff] could not be reserved
[    0.198662] system 00:11: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.198782] pnp: PnP ACPI: found 18 devices
[    0.198783] ACPI: ACPI bus type pnp unregistered
[    0.198787] PnPBIOS: Disabled by ACPI PNP
[    0.235110] PCI: max bus depth: 1 pci_try_num: 2
[    0.235154] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf4000000-0xf41fffff]
[    0.235158] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf4200000-0xf43fffff 64bit pref]
[    0.235162] pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
[    0.235165] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.235167] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    0.235171] pci 0000:00:01.0:   bridge window [mem 0xfa000000-0xfeafffff]
[    0.235174] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.235179] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
[    0.235181] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.235186] pci 0000:00:1c.0:   bridge window [mem 0xf4000000-0xf41fffff]
[    0.235190] pci 0000:00:1c.0:   bridge window [mem 0xf4200000-0xf43fffff 64bit pref]
[    0.235196] pci 0000:00:1c.3: PCI bridge to [bus 02-02]
[    0.235199] pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
[    0.235204] pci 0000:00:1c.3:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.235207] pci 0000:00:1c.3:   bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[    0.235213] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
[    0.235243] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.235247] pci 0000:00:01.0: setting latency timer to 64
[    0.235253] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[    0.235257] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.235261] pci 0000:00:1c.0: setting latency timer to 64
[    0.235270] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.235273] pci 0000:00:1c.3: setting latency timer to 64
[    0.235280] pci 0000:00:1e.0: setting latency timer to 64
[    0.235283] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.235285] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.235288] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.235290] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.235292] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xffffffff]
[    0.235294] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    0.235297] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfeafffff]
[    0.235299] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[    0.235301] pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
[    0.235303] pci_bus 0000:03: resource 1 [mem 0xf4000000-0xf41fffff]
[    0.235306] pci_bus 0000:03: resource 2 [mem 0xf4200000-0xf43fffff 64bit pref]
[    0.235308] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.235310] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[    0.235312] pci_bus 0000:02: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
[    0.235315] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
[    0.235317] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
[    0.235319] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[    0.235321] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
[    0.235324] pci_bus 0000:04: resource 8 [mem 0xe0000000-0xffffffff]
[    0.235371] NET: Registered protocol family 2
[    0.235445] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.235670] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.236117] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.236346] TCP: Hash tables configured (established 131072 bind 65536)
[    0.236348] TCP reno registered
[    0.236351] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.236362] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.236448] NET: Registered protocol family 1
[    0.236490] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.236508] pci 0000:00:1d.0: PCI INT A disabled
[    0.236515] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.236531] pci 0000:00:1d.1: PCI INT B disabled
[    0.236544] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.236559] pci 0000:00:1d.2: PCI INT C disabled
[    0.236566] pci 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    0.236581] pci 0000:00:1d.3: PCI INT D disabled
[    0.236589] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.236616] pci 0000:00:1d.7: PCI INT A disabled
[    0.236640] pci 0000:01:00.0: Boot video device
[    0.236646] PCI: CLS 32 bytes, default 64
[    0.236970] audit: initializing netlink socket (disabled)
[    0.236979] type=2000 audit(1344427183.232:1): initialized
[    0.263101] highmem bounce pool size: 64 pages
[    0.263107] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.278282] VFS: Disk quotas dquot_6.5.2
[    0.278352] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.278875] fuse init (API version 7.17)
[    0.278963] msgmni has been set to 1625
[    0.279251] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.279275] io scheduler noop registered
[    0.279277] io scheduler deadline registered
[    0.279283] io scheduler cfq registered (default)
[    0.279391] pcieport 0000:00:01.0: setting latency timer to 64
[    0.279425] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.279470] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.279505] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    0.279561] pcieport 0000:00:1c.3: setting latency timer to 64
[    0.279596] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[    0.279672] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.279697] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.279774] intel_idle: MWAIT substates: 0x22220
[    0.279776] intel_idle: does not run on family 6 model 23
[    0.279857] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.279861] ACPI: Power Button [PWRB]
[    0.279908] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.279911] ACPI: Power Button [PWRF]
[    0.281430] ERST: Table is not found!
[    0.281432] GHES: HEST is not enabled!
[    0.281520] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.288070] isapnp: Scanning for PnP cards...
[    0.301871] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.452220] Freeing initrd memory: 13820k freed
[    0.640925] isapnp: No Plug & Play device found
[    0.712645] 00:0f: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.728325] Linux agpgart interface v0.103
[    0.729938] brd: module loaded
[    0.730697] loop: module loaded
[    0.730866] ata_piix 0000:00:1f.1: version 2.13
[    0.730881] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.730919] ata_piix 0000:00:1f.1: setting latency timer to 64
[    0.731235] scsi0 : ata_piix
[    0.731311] scsi1 : ata_piix
[    0.732488] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    0.732491] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    0.732515] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.732520] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.732560] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.732840] scsi2 : ata_piix
[    0.732907] scsi3 : ata_piix
[    0.734063] ata3: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xb880 irq 19
[    0.734066] ata4: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb888 irq 19
[    0.734423] Fixed MDIO Bus: probed
[    0.734442] tun: Universal TUN/TAP device driver, 1.6
[    0.734444] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.734500] PPP generic driver version 2.4.2
[    0.734599] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.734615] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.734628] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.734631] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.734681] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.734698] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    0.734708] ehci_hcd 0000:00:1d.7: debug port 1
[    0.738584] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.738597] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9ffbc00
[    0.752022] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.752171] hub 1-0:1.0: USB hub found
[    0.752175] hub 1-0:1.0: 8 ports detected
[    0.752249] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.752261] uhci_hcd: USB Universal Host Controller Interface driver
[    0.752277] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.752283] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.752286] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.752326] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.752347] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c480
[    0.752469] hub 2-0:1.0: USB hub found
[    0.752473] hub 2-0:1.0: 2 ports detected
[    0.752531] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.752538] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.752541] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.752587] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.752608] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c800
[    0.752725] hub 3-0:1.0: USB hub found
[    0.752729] hub 3-0:1.0: 2 ports detected
[    0.752784] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.752790] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.752793] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.752834] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.752863] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c880
[    0.752976] hub 4-0:1.0: USB hub found
[    0.752979] hub 4-0:1.0: 2 ports detected
[    0.753037] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    0.753043] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.753046] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.753091] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.753119] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000cc00
[    0.753233] hub 5-0:1.0: USB hub found
[    0.753236] hub 5-0:1.0: 2 ports detected
[    0.753337] usbcore: registered new interface driver libusual
[    0.753395] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.753397] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.753901] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.754003] mousedev: PS/2 mouse device common for all mice
[    0.754148] rtc_cmos 00:03: RTC can wake from S4
[    0.754248] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.754270] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.754327] device-mapper: uevent: version 1.0.3
[    0.754397] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    0.754431] EISA: Probing bus 0 at eisa.0
[    0.754433] EISA: Cannot allocate resource for mainboard
[    0.754435] Cannot allocate resource for EISA slot 1
[    0.754437] Cannot allocate resource for EISA slot 2
[    0.754439] Cannot allocate resource for EISA slot 3
[    0.754440] Cannot allocate resource for EISA slot 4
[    0.754442] Cannot allocate resource for EISA slot 5
[    0.754443] Cannot allocate resource for EISA slot 6
[    0.754445] Cannot allocate resource for EISA slot 7
[    0.754447] Cannot allocate resource for EISA slot 8
[    0.754448] EISA: Detected 0 cards.
[    0.754456] cpufreq-nforce2: No nForce2 chipset.
[    0.754459] cpuidle: using governor ladder
[    0.754460] cpuidle: using governor menu
[    0.754462] EFI Variables Facility v0.08 2004-May-17
[    0.754709] TCP cubic registered
[    0.754821] NET: Registered protocol family 10
[    0.755346] NET: Registered protocol family 17
[    0.755350] Registering the dns_resolver key type
[    0.755369] Using IPI No-Shortcut mode
[    0.755470] PM: Hibernation image not present or could not be loaded.
[    0.755481] registered taskstats version 1
[    0.768093]   Magic number: 8:221:984
[    0.768181] rtc_cmos 00:03: setting system clock to 2012-08-08 11:59:44 UTC (1344427184)
[    0.768493] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.768495] EDD information not available.
[    0.782478] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    0.896277] ata4.01: NODEV after polling detection
[    0.904538] ata4.00: ATAPI: HL-DT-ST DVDRAM GH22NS40, NL00, max UDMA/100
[    0.904713] ata3.00: ATA-8: MAXTOR STM3500320AS, MX1A, max UDMA/133
[    0.904718] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    0.920206] ata4.00: configured for UDMA/100
[    0.920595] ata3.00: configured for UDMA/133
[    0.928297] ata1.00: ATAPI: PHILIPS SPD2413P, GP02, max UDMA/66
[    0.928591] ata1.01: ATA-5: ST310212A, 3.02, max UDMA/66
[    0.928596] ata1.01: 20005650 sectors, multi 32: LBA 
[    0.928604] ata1.00: limited to UDMA/33 due to 40-wire cable
[    0.928608] ata1.01: limited to UDMA/33 due to 40-wire cable
[    0.960185] ata1.00: configured for UDMA/33
[    0.976440] ata1.01: configured for UDMA/33
[    0.978165] scsi 0:0:0:0: CD-ROM            PHILIPS  SPD2413P         GP02 PQ: 0 ANSI: 5
[    0.980804] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    0.980809] cdrom: Uniform CD-ROM driver Revision: 3.20
[    0.980947] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    0.981070] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    0.981502] scsi 0:0:1:0: Direct-Access     ATA      ST310212A        3.02 PQ: 0 ANSI: 5
[    0.981604] sd 0:0:1:0: [sda] 20005650 512-byte logical blocks: (10.2 GB/9.53 GiB)
[    0.981627] sd 0:0:1:0: Attached scsi generic sg1 type 0
[    0.981647] sd 0:0:1:0: [sda] Write Protect is off
[    0.981649] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
[    0.981706] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.981768] scsi 2:0:0:0: Direct-Access     ATA      MAXTOR STM350032 MX1A PQ: 0 ANSI: 5
[    0.981871] sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    0.981922] sd 2:0:0:0: [sdb] Write Protect is off
[    0.981924] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    0.981927] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    0.981955] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.985453] scsi 3:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH22NS40  NL00 PQ: 0 ANSI: 5
[    0.991297] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    0.991424] sr 3:0:0:0: Attached scsi CD-ROM sr1
[    0.991535] sr 3:0:0:0: Attached scsi generic sg3 type 5
[    1.006412]  sda:
[    1.006580] sd 0:0:1:0: [sda] Attached SCSI disk
[    1.010313]  sdb: sdb1 < sdb5 sdb6 > sdb2 sdb4
[    1.010694] sd 2:0:0:0: [sdb] Attached SCSI disk
[    1.010761] Freeing unused kernel memory: 740k freed
[    1.011035] Write protecting the kernel text: 5816k
[    1.011052] Write protecting the kernel read-only data: 2376k
[    1.011053] NX-protecting the kernel data: 4424k
[    1.025699] udevd[94]: starting version 175
[    1.082852] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.082874] r8169 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    1.082902] r8169 0000:02:00.0: setting latency timer to 64
[    1.082958] r8169 0000:02:00.0: irq 43 for MSI/MSI-X
[    1.083557] r8169 0000:02:00.0: eth0: RTL8168c/8111c at 0xf8416000, 00:24:8c:b6:af:ec, XID 1c4000c0 IRQ 43
[    1.083560] r8169 0000:02:00.0: eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[    1.094969] Floppy drive(s): fd0 is 1.44M
[    1.112366] FDC 0 is a post-1991 82077
[    1.232032] usb 1-5: new high-speed USB device number 4 using ehci_hcd
[    1.236024] Refined TSC clocksource calibration: 2499.999 MHz.
[    1.236032] Switching to clocksource tsc
[    1.368472] usbcore: registered new interface driver uas
[    1.368781] Initializing USB Mass Storage driver...
[    1.368953] scsi4 : usb-storage 1-5:1.0
[    1.369024] usbcore: registered new interface driver usb-storage
[    1.369026] USB Mass Storage support registered.
[    1.476031] usb 1-6: new high-speed USB device number 5 using ehci_hcd
[    1.478900] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[    1.848028] usb 2-2: new full-speed USB device number 2 using uhci_hcd
[    2.268037] usb 3-1: new low-speed USB device number 2 using uhci_hcd
[    2.368807] scsi 4:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
[    2.369311] scsi 4:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
[    2.369935] scsi 4:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
[    2.370533] scsi 4:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
[    2.370979] sd 4:0:0:0: Attached scsi generic sg4 type 0
[    2.371125] sd 4:0:0:1: Attached scsi generic sg5 type 0
[    2.371331] sd 4:0:0:2: Attached scsi generic sg6 type 0
[    2.371478] sd 4:0:0:3: Attached scsi generic sg7 type 0
[    2.376911] sd 4:0:0:2: [sde] Attached SCSI removable disk
[    2.377537] sd 4:0:0:0: [sdc] Attached SCSI removable disk
[    2.378160] sd 4:0:0:1: [sdd] Attached SCSI removable disk
[    2.378910] sd 4:0:0:3: [sdf] Attached SCSI removable disk
[   10.744166] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   10.769711] udevd[317]: starting version 175
[   10.793860] Adding 4193276k swap on /dev/sdb6.  Priority:-1 extents:1 across:4193276k 
[   10.809773] lp: driver loaded but no devices found
[   10.915943] parport_pc 00:07: reported by Plug and Play ACPI
[   10.916110] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[   10.949634] EXT4-fs (sdb5): re-mounted. Opts: errors=remount-ro
[   10.950600] nvidia: module license 'NVIDIA' taints kernel.
[   10.950603] Disabling lock debugging due to kernel taint
[   10.969473] intel_rng: FWH not detected
[   10.977661] type=1400 audit(1344419994.705:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=514 comm="apparmor_parser"
[   10.978057] type=1400 audit(1344419994.705:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=514 comm="apparmor_parser"
[   10.978277] type=1400 audit(1344419994.705:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=514 comm="apparmor_parser"
[   10.980829] leds_ss4200: no LED devices found
[   11.002378] Linux video capture interface: v2.00
[   11.002745] gspca_main: v2.14.0 registered
[   11.003097] gspca_main: STV06xx-2.14.0 probing 046d:0850
[   11.033717] usbcore: registered new interface driver usbhid
[   11.033719] usbhid: USB HID core driver
[   11.038473] gspca_stv06xx: vv6410 sensor detected
[   11.038519] lp0: using parport0 (interrupt-driven).
[   11.260841] ppdev: user-space parallel port driver
[   11.272737] input: A4Tech RF USB Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input3
[   11.272917] a4tech 0003:09DA:001A.0001: input,hidraw0: USB HID v1.10 Mouse [A4Tech RF USB Mouse] on usb-0000:00:1d.1-1/input0
[   11.308083] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   11.308094] nvidia 0000:01:00.0: setting latency timer to 64
[   11.308101] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   11.308626] NVRM: loading NVIDIA UNIX x86 Kernel Module  295.40  Thu Apr  5 21:28:09 PDT 2012
[   11.325528] input: STV06xx as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/input/input4
[   11.327120] usbcore: registered new interface driver STV06xx
[   11.351385] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   11.351441] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[   11.351468] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[   11.411317] init: failsafe main process (743) killed by TERM signal
[   11.427072] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[   11.427166] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   11.427233] input: HDA Intel Line-Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   11.431183] usbcore: registered new interface driver snd-usb-audio
[   11.598696] Bluetooth: Core ver 2.16
[   11.617222] NET: Registered protocol family 31
[   11.617226] Bluetooth: HCI device and connection manager initialized
[   11.617229] Bluetooth: HCI socket layer initialized
[   11.617231] Bluetooth: L2CAP socket layer initialized
[   11.617499] type=1400 audit(1344419995.345:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=841 comm="apparmor_parser"
[   11.617609] Bluetooth: SCO socket layer initialized
[   11.618019] type=1400 audit(1344419995.345:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=841 comm="apparmor_parser"
[   11.635705] Bluetooth: RFCOMM TTY layer initialized
[   11.635710] Bluetooth: RFCOMM socket layer initialized
[   11.635712] Bluetooth: RFCOMM ver 1.11
[   11.659931] type=1400 audit(1344419995.385:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=870 comm="apparmor_parser"
[   11.661039] type=1400 audit(1344419995.389:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=870 comm="apparmor_parser"
[   11.661377] type=1400 audit(1344419995.389:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=869 comm="apparmor_parser"
[   11.661931] type=1400 audit(1344419995.389:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=870 comm="apparmor_parser"
[   11.674372] type=1400 audit(1344419995.401:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=873 comm="apparmor_parser"
[   11.742813] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   11.742816] Bluetooth: BNEP filters: protocol multicast
[   11.756452] r8169 0000:02:00.0: eth0: link down
[   11.756457] r8169 0000:02:00.0: eth0: link down
[   11.756792] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   11.757160] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   11.768086] vesafb: mode is 1280x720x32, linelength=5120, pages=0
[   11.768088] vesafb: scrolling: redraw
[   11.768091] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[   11.768098] mtrr: type mismatch for fb000000,400000 old: write-back new: write-combining
[   11.768101] mtrr: type mismatch for fb000000,200000 old: write-back new: write-combining
[   11.768104] mtrr: type mismatch for fb000000,100000 old: write-back new: write-combining
[   11.768107] mtrr: type mismatch for fb000000,80000 old: write-back new: write-combining
[   11.768110] mtrr: type mismatch for fb000000,40000 old: write-back new: write-combining
[   11.768113] mtrr: type mismatch for fb000000,20000 old: write-back new: write-combining
[   11.768116] mtrr: type mismatch for fb000000,10000 old: write-back new: write-combining
[   11.768119] mtrr: type mismatch for fb000000,8000 old: write-back new: write-combining
[   11.768121] mtrr: type mismatch for fb000000,4000 old: write-back new: write-combining
[   11.768124] mtrr: type mismatch for fb000000,2000 old: write-back new: write-combining
[   11.768127] mtrr: type mismatch for fb000000,1000 old: write-back new: write-combining
[   11.768508] vesafb: framebuffer at 0xfb000000, mapped to 0xf8b00000, using 3648k, total 3648k
[   11.770486] Console: switching to colour frame buffer device 160x45
[   11.770511] fb0: VESA VGA frame buffer device
[   13.506552] r8169 0000:02:00.0: eth0: link up
[   13.509104] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   13.818927] init: plymouth-upstart-bridge main process (800) killed by TERM signal
[   24.128007] eth0: no IPv6 routers present
[  331.456349] usb 1-6: USB disconnect, device number 5
[ 2091.544057] usb 1-6: new high-speed USB device number 6 using ehci_hcd

Il risultato del secondo comando:

Codice: Seleziona tutto

giuseppe@giu-ubuntu:~$ sudo parted -l
[sudo] password for giuseppe: 
Modello: ATA ST310212A (scsi)
Disco /dev/sda: 10,2GB
Dimensione del settore (logica/fisica): 512B/512B
Tabella delle partizioni: msdos

Numero  Inizio  Fine  Dimensione  Tipo  File system  Flag


Modello: ATA MAXTOR STM350032 (scsi)
Disco /dev/sdb: 500GB
Dimensione del settore (logica/fisica): 512B/512B
Tabella delle partizioni: msdos

Numero  Inizio  Fine    Dimensione  Tipo      File system     Flag
 1      1048kB  33,0GB  33,0GB      extended
 5      1049kB  28,7GB  28,7GB      logical   ext4
 6      28,7GB  33,0GB  4294MB      logical   linux-swap(v1)
 2      33,0GB  71,9GB  38,9GB      primary   ntfs            avvio
 4      71,9GB  500GB   428GB       primary   ntfs

E da quello che si vede mi legge solo i 2 hd interni, rispettivamente da 10gb e 500gb, ma non mi legge il terzo (l'hd esterno da 500gb).

Tra l'altro ho provato con Windows 7 E ME LO TROVA COM Initio Combo Device (?!) ma non come hd

[steff]

Sembra che non lo vede davvero, poi ho sbagliato, il comando giusto sarebbe

Codice: Seleziona tutto

dmesg |tail

da dare dopo l'inserimento, riprova.

[giok]

Codice: Seleziona tutto

gio@gio-ubu:~$ dmesg | tail
[   21.271901] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   32.240085] wlan0: no IPv6 routers present
[ 1640.859874] CE: hpet increased min_delta_ns to 20113 nsec
[ 6150.284130] usb 7-2: new full-speed USB device number 2 using uhci_hcd
[ 6150.503012] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 6150.503520] usbcore: registered new interface driver btusb
[ 7824.072062] usb 7-2: USB disconnect, device number 2
[ 8938.392113] usb 2-2: new high-speed USB device number 7 using ehci_hcd
[ 8953.163884] usb 2-2: USB disconnect, device number 7
[ 8959.632139] usb 2-2: new high-speed USB device number 8 using ehci_hcd
gio@gio-ubu:~$

L'hd l'ho montato sun un pc fisso come disco interno e me lo leggo bene.
Ho testato anche il box con un altro hd (da 2,5" a differenza dell'altro che è da 3,5"). A questo punto mi viene da pensare che non funziona l'alimentazione del box.

[steff]

Qualcosa vede, ma ci sta che è il box.

[giok]

Però è strano che l'altro hd me lo legga.