Che può essere?
[Video] VLC provoca un crash
[Video] VLC provoca un crash
Ciao ragazzi ho installato VLC su Ubuntu Dapper 64bit .... appena provo ad avviarlo mi va in crash tutto e si riavvia il server grafico.
Che può essere?
Che può essere?
-
fabioamd87
- Rampante Reduce
- Messaggi: 5371
- Iscrizione: domenica 4 dicembre 2005, 15:40
- Desktop: GNOME Shell
- Distribuzione: Arch Linux
- Località: Cassino
- Contatti:
Re: [Video] VLC provoca un crash
apri un terminale e digita vlc, posta l'output...
il mio sito: http://gmcworld.altervista.org
Re: [Video] VLC provoca un crash
Se digito Vlc da terminale non succede nulla , o meglio, sembra tutto normale.. il sistema va in crash appena provo a avviare un qualsiasi filmato.. indipendentemente dal formato.
Inoltre non funziona neanche totem .. in questo caso l'errore e questo:
received X error event: BadMatch (invalid parameter attributes)
The program 'totem' received an X Window System error.
This probably reflects a bug in the program.
The error was 'BadMatch (invalid parameter attributes)'.
(Details: serial 83 error_code 8 request_code 141 minor_code 17)
(Note to programmers: normally, X errors are reported asynchronously;
that is, you will receive the error a while after causing it.
To debug your program, run it with the --sync command line
option to change this behavior. You can then get a meaningful
backtrace from your debugger if you break on the gdk_x_error() function.)
Non so se è possibile ma tempo fa ho riconfigurato xserver-xorg e ho settato il Framebuffer può essere questo? ::)
Inoltre non funziona neanche totem .. in questo caso l'errore e questo:
received X error event: BadMatch (invalid parameter attributes)
The program 'totem' received an X Window System error.
This probably reflects a bug in the program.
The error was 'BadMatch (invalid parameter attributes)'.
(Details: serial 83 error_code 8 request_code 141 minor_code 17)
(Note to programmers: normally, X errors are reported asynchronously;
that is, you will receive the error a while after causing it.
To debug your program, run it with the --sync command line
option to change this behavior. You can then get a meaningful
backtrace from your debugger if you break on the gdk_x_error() function.)
Non so se è possibile ma tempo fa ho riconfigurato xserver-xorg e ho settato il Framebuffer può essere questo? ::)
-
fabioamd87
- Rampante Reduce
- Messaggi: 5371
- Iscrizione: domenica 4 dicembre 2005, 15:40
- Desktop: GNOME Shell
- Distribuzione: Arch Linux
- Località: Cassino
- Contatti:
Re: [Video] VLC provoca un crash
Ma che! ho provato a riconfigurare xserver-xorg.... nulla! Va in crash comunque... non so proprio cosa possa essere >:(
Re: [Video] VLC provoca un crash
E ANCHE MPLAYER FA LO STESSO! Cosa può essere?
I driver Ati?
I driver Ati?
-
Janvitus
- Amministratore
- Messaggi: 18787
- Iscrizione: lunedì 25 aprile 2005, 15:52
- Desktop: GNOME Shell / Xfce
- Sesso: Maschile
- Località: Potenza
- Contatti:
Re: [Video] VLC provoca un crash
sistema > preferenze > selettore sistemi multimediali > video > plugin uscita > no xv
Re: [Video] VLC provoca un crash
ehm non ho trovato la voce "selettore sistemi multimediali" nel menù preferenze ... da terminale?
Re: [Video] VLC provoca un crash
ok fatto ma non cambia nulla....
ho notato che quando faccio partire da terminale gstreamer-properties mi segnala dei plugin mancanti
gstreamer-properties-Message: Skipping unavailable plugin 'artsdsink'
gstreamer-properties-Message: Skipping unavailable plugin 'polypsink'
gstreamer-properties-Message: Skipping unavailable plugin 'v4lmjpegsrc'
gstreamer-properties-Message: Skipping unavailable plugin 'qcamsrc'
gstreamer-properties-Message: Skipping unavailable plugin 'esdmon'
gstreamer-properties-Message: Skipping unavailable plugin 'polypsrc'
può essere questo il motivo? Anche se il fatto che crasha gnome per dei plugin mancanti mi sembra strano!
ho notato che quando faccio partire da terminale gstreamer-properties mi segnala dei plugin mancanti
gstreamer-properties-Message: Skipping unavailable plugin 'artsdsink'
gstreamer-properties-Message: Skipping unavailable plugin 'polypsink'
gstreamer-properties-Message: Skipping unavailable plugin 'v4lmjpegsrc'
gstreamer-properties-Message: Skipping unavailable plugin 'qcamsrc'
gstreamer-properties-Message: Skipping unavailable plugin 'esdmon'
gstreamer-properties-Message: Skipping unavailable plugin 'polypsrc'
può essere questo il motivo? Anche se il fatto che crasha gnome per dei plugin mancanti mi sembra strano!
Re: [Video] VLC provoca un crash
Allora sicuramente è l'Xv che da problemi.. perchè quando faccio il test de da gstreamer-properties mi crasha tutto ..... ora ho cambiato l'impostazione del plugin video in uscita mettendo no Xv ma crasha lo stesso.
Ricordo che nella configurazione dei driver Ati c'è questo comando:
sudo aticonfig --overlay-type=Xv
questa è l'impostazione che credo sia errata... come si toglie?
Ricordo che nella configurazione dei driver Ati c'è questo comando:
sudo aticonfig --overlay-type=Xv
questa è l'impostazione che credo sia errata... come si toglie?
-
Janvitus
- Amministratore
- Messaggi: 18787
- Iscrizione: lunedì 25 aprile 2005, 15:52
- Desktop: GNOME Shell / Xfce
- Sesso: Maschile
- Località: Potenza
- Contatti:
Re: [Video] VLC provoca un crash
Tutto normale.zoth ha scritto: ok fatto ma non cambia nulla....
ho notato che quando faccio partire da terminale gstreamer-properties mi segnala dei plugin mancanti
gstreamer-properties-Message: Skipping unavailable plugin ''artsdsink''
gstreamer-properties-Message: Skipping unavailable plugin ''polypsink''
gstreamer-properties-Message: Skipping unavailable plugin ''v4lmjpegsrc''
gstreamer-properties-Message: Skipping unavailable plugin ''qcamsrc''
gstreamer-properties-Message: Skipping unavailable plugin ''esdmon''
gstreamer-properties-Message: Skipping unavailable plugin ''polypsrc''
può essere questo il motivo? Anche se il fatto che crasha gnome per dei plugin mancanti mi sembra strano!
Il problema molto probabilmente è questo, ma non conoscendo le ati non so aiutarti, controlla il manuale del driver.zoth ha scritto:
sudo aticonfig --overlay-type=Xv
questa è l''impostazione che credo sia errata... come si toglie?
Re: [Video] VLC provoca un crash
Allora è veramente un caso irrisolvibile? Mi tocca reistallare tutto?che rottura!
Il modo per cambiare l'impostazione c'è ed è sudo aticonfig -- overlay-type=disable ma non funziona neanche questo!
non è possibile! non capisco soprattutto come posso andare ad individuare l'errore visto che mi crasha gnome!...
Vi posto il mio dmesg nella speranza che ci sia qualcuno che ne capisca più di me a riguardo!
>:( >:(
Il modo per cambiare l'impostazione c'è ed è sudo aticonfig -- overlay-type=disable ma non funziona neanche questo!
non è possibile! non capisco soprattutto come posso andare ad individuare l'errore visto che mi crasha gnome!...
Vi posto il mio dmesg nella speranza che ci sia qualcuno che ne capisca più di me a riguardo!
Codice: Seleziona tutto
0.000000] Bootdata ok (command line is root=/dev/hda6 ro quiet splash )
[ 0.000000] Linux version 2.6.15-27-amd64-generic (buildd@king) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Fri Dec 8 17:50:54 UTC 2006
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffd0000 (usable)
[ 0.000000] BIOS-e820: 000000003ffd0000 - 000000003ffde000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ffde000 - 0000000040000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[ 0.000000] ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000f7870
[ 0.000000] ACPI: RSDT (v001 A M I OEMRSDT 0x03000627 MSFT 0x00000097) @ 0x000000003ffd0000
[ 0.000000] ACPI: FADT (v002 A M I OEMFACP 0x03000627 MSFT 0x00000097) @ 0x000000003ffd0200
[ 0.000000] ACPI: MADT (v001 A M I OEMAPIC 0x03000627 MSFT 0x00000097) @ 0x000000003ffd0390
[ 0.000000] ACPI: MCFG (v001 A M I OEMMCFG 0x03000627 MSFT 0x00000097) @ 0x000000003ffd03f0
[ 0.000000] ACPI: OEMB (v001 A M I AMI_OEM 0x03000627 MSFT 0x00000097) @ 0x000000003ffde040
[ 0.000000] ACPI: DSDT (v001 1ABZX 1ABZX001 0x00000001 INTL 0x02002026) @ 0x0000000000000000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] Number of nodes 1
[ 0.000000] Node 0 MemBase 0000000000000000 Limit 000000003ffd0000
[ 0.000000] Using 63 for the hash shift.
[ 0.000000] Using node hash shift of 63
[ 0.000000] Bootmem setup node 0 0000000000000000-000000003ffd0000
[ 0.000000] No mptable found.
[ 0.000000] On node 0 totalpages: 257490
[ 0.000000] DMA zone: 3017 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 254473 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages, LIFO batch:0
[ 0.000000] HighMem zone: 0 pages, LIFO batch:0
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:4 APIC version 16
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 20, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to physical flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bf780000)
[ 0.000000] Checking aperture...
[ 0.000000] CPU 0: aperture @ 3a6000000 size 32 MB
[ 0.000000] Aperture from northbridge cpu 0 too small (32 MB)
[ 0.000000] No AGP bridge found
[ 0.000000] SMP: Allowing 3 CPUs, 2 hotplug CPUs
[ 0.000000] Built 1 zonelists
[ 0.000000] Kernel command line: root=/dev/hda6 ro quiet splash
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 131072 bytes)
[ 0.000000] time.c: Using 3.579545 MHz PM timer.
[ 0.000000] time.c: Detected 1800.105 MHz processor.
[ 15.879712] Console: colour VGA+ 80x25
[ 15.880889] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 15.881677] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 15.897775] Memory: 1021036k/1048384k available (2151k kernel code, 26960k reserved, 757k data, 180k init)
[ 15.976517] Calibrating delay using timer specific routine.. 3604.51 BogoMIPS (lpj=7209038)
[ 15.976580] Security Framework v1.0.0 initialized
[ 15.976588] SELinux: Disabled at boot.
[ 15.976613] Mount-cache hash table entries: 256
[ 15.976767] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 15.976770] CPU: L2 Cache: 1024K (64 bytes/line)
[ 15.976773] CPU 0(1) -> Node 0 -> Core 0
[ 15.976782] mtrr: v2.0 (20020519)
[ 15.976791] SMP alternatives: switching to UP code
[ 15.977244] checking if image is initramfs... it is
[ 16.585412] Freeing initrd memory: 7097k freed
[ 16.593443] ACPI: Looking for DSDT ... not found!
[ 22.844910] Using local APIC timer interrupts.
[ 22.900382] Detected 12.500 MHz APIC timer.
[ 22.900452] Brought up 1 CPUs
[ 22.900473] time.c: Using PIT/TSC based timekeeping.
[ 22.900476] testing NMI watchdog ... OK.
[ 22.940758] NET: Registered protocol family 16
[ 22.940785] ACPI: bus type pci registered
[ 22.940792] PCI: Using configuration type 1
[ 22.945330] PCI: Using MMCONFIG at e0000000
[ 22.945954] ACPI: Subsystem revision 20051216
[ 23.016803] ACPI: Interpreter enabled
[ 23.016805] ACPI: Using IOAPIC for interrupt routing
[ 23.017854] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 23.017857] PCI: Probing PCI hardware (bus 00)
[ 23.020471] Boot video device is 0000:01:00.0
[ 23.020545] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 23.042138] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 23.045038] ACPI: Embedded Controller [EC0] (gpe 25) interrupt mode.
[ 23.049253] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *10 11 12 14 15)
[ 23.049561] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 23.049865] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 *11 12 14 15)
[ 23.050178] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 23.050487] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 23.050790] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 7 10 11 12 14 15)
[ 23.051095] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 23.051400] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 23.051759] ACPI: Power Resource [GFAN] (off)
[ 23.051782] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 23.051793] pnp: PnP ACPI init
[ 23.055360] pnp: PnP ACPI: found 14 devices
[ 23.055373] PCI: Using ACPI for IRQ routing
[ 23.055376] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 23.055473] PCI-DMA: Disabling IOMMU.
[ 23.056459] pnp: 00:09: ioport range 0xa00-0xa0f has been reserved
[ 23.056633] PCI: Bridge: 0000:00:01.0
[ 23.056636] IO window: b000-bfff
[ 23.056641] MEM window: fe200000-fe2fffff
[ 23.056644] PREFETCH window: bdf00000-ddefffff
[ 23.056648] PCI: Bus 2, cardbus bridge: 0000:00:0a.0
[ 23.056650] IO window: 00001000-000010ff
[ 23.056653] IO window: 00001400-000014ff
[ 23.056657] PREFETCH window: 50000000-51ffffff
[ 23.056660] MEM window: 52000000-53ffffff
[ 23.056675] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 23.056684] GSI 16 sharing vector 0xA9 and IRQ 16
[ 23.056687] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 169
[ 23.056916] IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
[ 23.057226] audit: initializing netlink socket (disabled)
[ 23.057235] audit(1168346739.188:1): initialized
[ 23.057378] VFS: Disk quotas dquot_6.5.1
[ 23.057398] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 23.057457] Initializing Cryptographic API
[ 23.057461] io scheduler noop registered
[ 23.057469] io scheduler anticipatory registered
[ 23.057475] io scheduler deadline registered
[ 23.057490] io scheduler cfq registered
[ 23.058300] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 23.058305] pcie_portdrv_probe->Dev[0004:1039] has invalid IRQ. Check vendor BIOS
[ 23.058328] assign_interrupt_mode Found MSI capability
[ 23.058369] Allocate Port Service[pcie00]
[ 23.071700] Real Time Clock Driver v1.12
[ 23.071739] Linux agpgart interface v0.101 (c) Dave Jones
[ 23.071846] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 23.073877] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 23.074840] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 23.075039] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 23.075228] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 23.075423] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 23.075612] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 23.075647] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[ 23.075802] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 23.077771] GSI 17 sharing vector 0xC1 and IRQ 17
[ 23.077774] ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18 (level, low) -> IRQ 193
[ 23.077782] ACPI: PCI interrupt for device 0000:00:02.6 disabled
[ 23.078154] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 23.078207] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 23.078211] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 23.078413] mice: PS/2 mouse device common for all mice
[ 23.078849] NET: Registered protocol family 2
[ 23.116142] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 23.116530] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 23.118719] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 23.119801] TCP: Hash tables configured (established 131072 bind 65536)
[ 23.119805] TCP reno registered
[ 23.120707] TCP bic registered
[ 23.120718] NET: Registered protocol family 1
[ 23.120727] NET: Registered protocol family 8
[ 23.120730] NET: Registered protocol family 20
[ 23.120937] ACPI wakeup devices:
[ 23.120939] PCI0 PS2K PS2M UAR2 AC97 MC97 MAC CBS0 P394 MPCI EUSB USB USB2 USB3 SLPB
[ 23.120952] ACPI: (supports S0 S1 S3 S4 S5)
[ 23.121016] Freeing unused kernel memory: 180k freed
[ 23.160341] vga16fb: initializing
[ 23.160345] vga16fb: mapped to 0xffff8100000a0000
[ 23.236865] input: AT Translated Set 2 keyboard as /class/input/input0
[ 23.275445] Console: switching to colour frame buffer device 80x25
[ 23.275449] fb0: VGA16 VGA frame buffer device
[ 24.288053] Capability LSM initialized
[ 24.408147] ACPI: Fan [FN00] (off)
[ 24.411377] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 24.411382] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 24.427688] ACPI: Thermal Zone [THRM] (68 C)
[ 24.882777] SIS5513: IDE controller at PCI slot 0000:00:02.5
[ 24.882800] SIS5513: chipset revision 1
[ 24.882803] SIS5513: not 100% native mode: will probe irqs later
[ 24.882814] SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
[ 24.882827] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
[ 24.882839] ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
[ 24.882849] Probing IDE interface ide0...
[ 25.171174] hda: FUJITSU MHV2100AT PL, ATA DISK drive
[ 25.845734] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 25.846200] Probing IDE interface ide1...
[ 26.581097] hdc: MATSHITADVD-RAM UJ-841S, ATAPI CD/DVD-ROM drive
[ 26.916751] ide1 at 0x170-0x177,0x376 on irq 15
[ 26.922455] hda: max request size: 128KiB
[ 26.994611] hda: 195371568 sectors (100030 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
[ 26.999267] hda: cache flushes supported
[ 26.999407] hda: hda1 hda2 hda3 < hda5 hda6 hda7 >
[ 27.057039] hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 27.057047] Uniform CD-ROM driver Revision: 3.20
[ 27.751286] usbcore: registered new driver usbfs
[ 27.751562] usbcore: registered new driver hub
[ 27.753532] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[ 27.754127] GSI 18 sharing vector 0xC9 and IRQ 18
[ 27.754131] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 201
[ 27.754491] ohci_hcd 0000:00:03.0: OHCI Host Controller
[ 27.755573] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
[ 27.755586] ohci_hcd 0000:00:03.0: irq 201, io mem 0xfebff000
[ 27.781647] ieee1394: Initialized config rom entry `ip1394'
[ 27.813222] hub 1-0:1.0: USB hub found
[ 27.813236] hub 1-0:1.0: 3 ports detected
[ 27.915112] GSI 19 sharing vector 0xD1 and IRQ 19
[ 27.915116] ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 209
[ 27.915440] ohci_hcd 0000:00:03.1: OHCI Host Controller
[ 27.915683] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
[ 27.915695] ohci_hcd 0000:00:03.1: irq 209, io mem 0xfebfe000
[ 27.973114] hub 2-0:1.0: USB hub found
[ 27.973125] hub 2-0:1.0: 3 ports detected
[ 28.074842] GSI 20 sharing vector 0xD9 and IRQ 20
[ 28.074846] ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 217
[ 28.074996] ohci_hcd 0000:00:03.2: OHCI Host Controller
[ 28.075220] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
[ 28.075234] ohci_hcd 0000:00:03.2: irq 217, io mem 0xfebfd000
[ 28.132878] hub 3-0:1.0: USB hub found
[ 28.132888] hub 3-0:1.0: 2 ports detected
[ 28.218511] usb 1-2: new full speed USB device using ohci_hcd and address 2
[ 28.236778] ohci1394: $Rev: 1313 $ Ben Collins <bcollins@debian.org>
[ 28.236798] ACPI: PCI Interrupt 0000:00:0a.1[B] -> GSI 18 (level, low) -> IRQ 193
[ 28.258448] GSI 21 sharing vector 0xE1 and IRQ 21
[ 28.258451] ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 225
[ 28.258991] ehci_hcd 0000:00:03.3: EHCI Host Controller
[ 28.259031] PCI: cache line size of 64 is not supported by device 0000:00:03.3
[ 28.259251] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 4
[ 28.259262] ehci_hcd 0000:00:03.3: irq 225, io mem 0xfebfc000
[ 28.259273] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 28.259522] hub 4-0:1.0: USB hub found
[ 28.259531] hub 4-0:1.0: 8 ports detected
[ 28.290604] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[193] MMIO=[febf9800-febf9fff] Max Packet=[2048]
[ 28.540016] Attempting manual resume
[ 28.560672] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 28.560676] EXT3-fs: write access will be enabled during recovery.
[ 28.817630] usb 4-4: new high speed USB device using ehci_hcd and address 2
[ 29.544546] usb 3-2: new full speed USB device using ohci_hcd and address 2
[ 29.565295] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e018000351451c]
[ 29.796922] EXT3-fs: recovery complete.
[ 29.796948] kjournald starting. Commit interval 5 seconds
[ 29.797356] EXT3-fs: mounted filesystem with ordered data mode.
[ 40.133657] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 40.240168] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 40.281749] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 169
[ 40.281762] Yenta: CardBus bridge found at 0000:00:0a.0 [1043:1107]
[ 40.361108] sdhci: Secure Digital Host Controller Interface driver, 0.10
[ 40.361112] sdhci: Copyright(c) Pierre Ossman
[ 40.409306] Yenta: ISA IRQ mask 0x04b8, PCI irq 169
[ 40.409311] Socket status: 30000006
[ 40.413358] GSI 22 sharing vector 0xE9 and IRQ 22
[ 40.413362] ACPI: PCI Interrupt 0000:00:0a.2[C] -> GSI 19 (level, low) -> IRQ 233
[ 40.463620] sdhci: ============== REGISTER DUMP ==============
[ 40.463625] sdhci: Sys addr: 0x00000000 | Version: 0x00000200
[ 40.463628] sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000
[ 40.463632] sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
[ 40.463635] sdhci: Present: 0x01fa0000 | Host ctl: 0x00000000
[ 40.463638] sdhci: Power: 0x00000000 | Blk gap: 0x00000000
[ 40.463641] sdhci: Walk up: 0x00000000 | Clock: 0x00000000
[ 40.463644] sdhci: Timeout: 0x0000000e | Int stat: 0x00000000
[ 40.463648] sdhci: Int enab: 0xe1ff00cf | Sig enab: 0xe1ff00cf
[ 40.463651] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
[ 40.463655] sdhci: Caps: 0x018021a1 | Max curr: 0x00000040
[ 40.463657] sdhci: ===========================================
[ 40.513739] mmc0: SDHCI at 0xfebf9400 irq 233 DMA
[ 40.514244] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 40.514264] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 233
[ 40.515335] eth0: Identified chip type is 'RTL8169s/8110s'.
[ 40.515340] eth0: RTL8169 at 0xffffc200100a4c00, 00:17:31:01:5d:64, IRQ 233
[ 40.959466] input: PC Speaker as /class/input/input1
[ 40.989998] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 193
[ 41.132304] irda_init()
[ 41.132327] NET: Registered protocol family 23
[ 41.504467] Bluetooth: Core ver 2.8
[ 41.504471] NET: Registered protocol family 31
[ 41.504473] Bluetooth: HCI device and connection manager initialized
[ 41.504487] Bluetooth: HCI socket layer initialized
[ 41.528784] r8169: eth0: link down
[ 41.536574] Bluetooth: HCI USB driver ver 2.9
[ 41.538838] usbcore: registered new driver hci_usb
[ 41.594400] parport: PnPBIOS parport detected.
[ 41.594428] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
[ 41.613365] ieee80211_crypt: registered algorithm 'NULL'
[ 41.631082] ieee80211: 802.11 data/management/control stack, git-1.1.7
[ 41.631087] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 41.691063] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008
[ 41.705096] bcm43xx driver
[ 41.730227] input: SynPS/2 Synaptics TouchPad as /class/input/input2
[ 41.796739] ts: Compaq touchscreen protocol output
[ 41.806509] intel8x0_measure_ac97_clock: measured 55465 usecs
[ 41.806512] intel8x0: clocking to 48000
[ 41.808354] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 18 (level, low) -> IRQ 193
[ 41.883411] usbcore: registered new driver snd-usb-audio
[ 42.088679] ieee80211_crypt: registered algorithm 'WEP'
[ 42.425533] lp0: using parport0 (interrupt-driven).
[ 42.587764] SCSI subsystem initialized
[ 42.618278] sbp2: $Rev: 1306 $ Ben Collins <bcollins@debian.org>
[ 42.618282] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[ 42.618284] ieee1394: sbp2: Try serialize_io=0 for better performance
[ 42.698378] Adding 1052216k swap on /dev/hda5. Priority:-1 extents:1 across:1052216k
[ 43.098104] EXT3 FS on hda6, internal journal
[ 43.221109] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[ 43.221113] md: bitmap version 4.39
[ 43.634176] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[ 44.313046] NET: Registered protocol family 17
[ 44.471619] cdrom: open failed.
[ 84.097699] kjournald starting. Commit interval 5 seconds
[ 84.098013] EXT3 FS on hda7, internal journal
[ 84.098018] EXT3-fs: mounted filesystem with ordered data mode.
[ 88.363915] CSLIP: code copyright 1989 Regents of the University of California
[ 88.383483] PPP generic driver version 2.4.2
[ 88.454713] NET: Registered protocol family 10
[ 88.454851] lo: Disabled Privacy Extensions
[ 88.454914] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 88.454916] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 88.454946] IPv6 over IPv4 tunneling driver
[ 130.652751] ACPI: AC Adapter [AC0] (on-line)
[ 130.696493] ACPI: Battery Slot [BAT0] (battery present)
[ 130.726106] Asus Laptop ACPI Extras version 0.29
[ 130.726380] no string returned by INIT
[ 130.726382] trying default values, supply the developers with your DSDT
[ 130.753485] ACPI: Power Button (FF) [PWRF]
[ 130.753509] ACPI: Power Button (CM) [PWRB]
[ 130.753518] ACPI: Lid Switch [LID]
[ 130.753528] ACPI: Sleep Button (CM) [SLPB]
[ 130.839337] ibm_acpi: ec object not found
[ 130.863048] pcc_acpi: loading...
[ 130.943346] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 131.255716] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.4)
[ 131.258784] powernow-k8: 0 : fid 0x0 (800 MHz), vid 0x16 (1000 mV)
[ 131.258787] powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0xc (1250 mV)
[ 131.258790] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xa (1300 mV)
[ 131.258794] cpu_init done, current fid 0xa, vid 0xa
[ 134.726960] SoftMAC: Open Authentication completed with 00:0c:f6:20:4f:50
[ 134.738431] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 137.398894] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 137.401022] [fglrx] Maximum main memory to use for locked dma buffers: 922 MBytes.
[ 137.401157] [fglrx] module loaded - fglrx 8.32.5 [Dec 12 2006] on minor 0
[ 137.432640] GSI 23 sharing vector 0x32 and IRQ 23
[ 137.432647] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 50
[ 139.012877] ppdev: user-space parallel port driver
[ 139.739712] [fglrx] total GART = 130023424
[ 139.739804] [fglrx] free GART = 114032640
[ 139.739807] [fglrx] max single GART = 114032640
[ 139.739810] [fglrx] total LFB = 134086656
[ 139.739812] [fglrx] free LFB = 119697408
[ 139.739814] [fglrx] max single LFB = 119697408
[ 139.739817] [fglrx] total Inv = 0
[ 139.739819] [fglrx] free Inv = 0
[ 139.739820] [fglrx] max single Inv = 0
[ 139.739822] [fglrx] total TIM = 0
[ 140.644460] Bluetooth: L2CAP ver 2.8
[ 140.644464] Bluetooth: L2CAP socket layer initialized
[ 140.648436] Bluetooth: RFCOMM socket layer initialized
[ 140.648454] Bluetooth: RFCOMM TTY layer initialized
[ 140.648456] Bluetooth: RFCOMM ver 1.7
[ 141.109749] /dev/vmmon[4863]: Module vmmon: registered with major=10 minor=165
[ 141.110004] /dev/vmmon[4863]: Module vmmon: initialized
[ 141.424169] /dev/vmnet: open called by PID 4889 (vmnet-bridge)
[ 141.424402] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 141.424548] /dev/vmnet: port on hub 0 successfully opened
[ 141.424684] bridge-eth0: enabling the bridge
[ 141.424794] bridge-eth0: up
[ 141.424879] bridge-eth0: already up
[ 141.424978] bridge-eth0: attached
[ 141.450540] /dev/vmnet: open called by PID 4899 (vmnet-bridge)
[ 141.451386] /dev/vmnet: hub 2 does not exist, allocating memory.
[ 141.451540] /dev/vmnet: port on hub 2 successfully opened
[ 141.451673] bridge-eth1: enabling the bridge
[ 141.451780] bridge-eth1: is a Wireless Adapter
[ 141.451929] bridge-eth1: up
[ 141.452013] bridge-eth1: already up
[ 141.452109] bridge-eth1: attached
[ 141.486947] /dev/vmnet: open called by PID 4908 (vmnet-natd)
[ 141.487186] /dev/vmnet: hub 8 does not exist, allocating memory.
[ 141.487334] /dev/vmnet: port on hub 8 successfully opened
[ 144.316617] /dev/vmnet: open called by PID 5006 (vmnet-netifup)
[ 144.316719] /dev/vmnet: hub 1 does not exist, allocating memory.
[ 144.316820] /dev/vmnet: port on hub 1 successfully opened
[ 144.332551] /dev/vmnet: open called by PID 5007 (vmnet-netifup)
[ 144.332655] /dev/vmnet: port on hub 8 successfully opened
[ 144.571733] eth1: no IPv6 routers present
[ 144.847496] /dev/vmnet: open called by PID 5032 (vmnet-dhcpd)
[ 144.847595] /dev/vmnet: port on hub 1 successfully opened
[ 144.848665] /dev/vmnet: open called by PID 5033 (vmnet-dhcpd)
[ 144.848757] /dev/vmnet: port on hub 8 successfully opened
[ 149.073559] vmnet1: no IPv6 routers present
[ 149.201362] vmnet8: no IPv6 routers present
[ 152.503984] Losing some ticks... checking if CPU frequency changed.
[ 162.797594] usb 1-1: new low speed USB device using ohci_hcd and address 3
[ 162.965667] usbcore: registered new driver hiddev
[ 162.969824] input: HID 0461:4d03 as /class/input/input3
[ 162.970219] input: USB HID v1.00 Mouse [HID 0461:4d03] on usb-0000:00:03.0-1
[ 162.970345] usbcore: registered new driver usbhid
[ 162.970425] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 171.804580] fgl_glxgears[5259] trap divide error rip:2aaaabc88bcd rsp:7fffffb6a8f0 error:0
[ 203.841381] Xorg[4579]: segfault at 0000000000000000 rip 0000000000000000 rsp 0000000000000000 error 14
[ 203.844954] scheduling while atomic: Xorg/0x00000001/4579
[ 203.844958]
[ 203.844959] Call Trace:<ffffffff8031545a>{schedule+122} <ffffffff80134d03>{__wake_up_common+67}
[ 203.844985] <ffffffff80134d83>{__wake_up+67} <ffffffff8846a352>{:fglrx:firegl_irq_cleanup+274}
[ 203.845036] <ffffffff884697f9>{:fglrx:firegl_takedown+2329} <ffffffff88468674>{:fglrx:firegl_release+260}
[ 203.845097] <ffffffff801919e2>{__fput+178} <ffffffff8018e898>{filp_close+104}
[ 203.845114] <ffffffff8013f4fa>{put_files_struct+122} <ffffffff80140707>{do_exit+599}
[ 203.845131] <ffffffff8014a938>{__dequeue_signal+536} <ffffffff8014126c>{do_group_exit+252}
[ 203.845149] <ffffffff8014bfda>{get_signal_to_deliver+1498} <ffffffff8010f5ad>{do_signal+157}
[ 203.845168] <ffffffff8017ef95>{remove_vma+85} <ffffffff80180793>{do_munmap+675}
[ 203.845189] <ffffffff8011052c>{retint_signal+61}
[ 204.658077] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 50
[ 205.916187] [fglrx] PCIe has already been initialized. Reinitializing ...
[ 205.950913] [fglrx] total GART = 130023424
[ 205.951146] [fglrx] free GART = 114032640
[ 205.951259] [fglrx] max single GART = 114032640
[ 205.951369] [fglrx] total LFB = 134086656
[ 205.951479] [fglrx] free LFB = 119697408
[ 205.951589] [fglrx] max single LFB = 119697408
[ 205.951698] [fglrx] total Inv = 0
[ 205.951797] [fglrx] free Inv = 0
[ 205.951895] [fglrx] max single Inv = 0
[ 205.951994] [fglrx] total TIM = 0
[ 276.535023] APIC error on CPU0: 00(40)
[ 276.535514] APIC error on CPU0: 40(40)
[ 277.984620] APIC error on CPU0: 40(40)
[ 277.985364] APIC error on CPU0: 40(40)
[ 278.161099] APIC error on CPU0: 40(40)
[ 297.857830] APIC error on CPU0: 40(40)
[ 303.928332] APIC error on CPU0: 40(40)
[ 304.006832] APIC error on CPU0: 40(40)
[ 314.632903] APIC error on CPU0: 40(40)
[ 393.891127] APIC error on CPU0: 40(40)
[ 466.301343] APIC error on CPU0: 40(40)
[ 472.338754] APIC error on CPU0: 40(40)
[ 472.748101] APIC error on CPU0: 40(40)
[ 473.056345] APIC error on CPU0: 40(40)
[ 473.746062] APIC error on CPU0: 40(40)
[ 473.751446] APIC error on CPU0: 40(40)
[ 487.454647] APIC error on CPU0: 40(40)
[ 490.874899] APIC error on CPU0: 40(40)
[ 490.949572] APIC error on CPU0: 40(40)
[ 502.460250] APIC error on CPU0: 40(40)
[ 502.968322] APIC error on CPU0: 40(40)
[ 572.948852] APIC error on CPU0: 40(40)
[ 577.112912] APIC error on CPU0: 40(40)
[ 577.113269] APIC error on CPU0: 40(40)
[ 577.133487] APIC error on CPU0: 40(40)
[ 577.566158] APIC error on CPU0: 40(40)
[ 600.674711] APIC error on CPU0: 40(40)
[ 601.917814] APIC error on CPU0: 40(40)
Ultima modifica di Janvitus il martedì 9 gennaio 2007, 20:25, modificato 1 volta in totale.
-
Janvitus
- Amministratore
- Messaggi: 18787
- Iscrizione: lunedì 25 aprile 2005, 15:52
- Desktop: GNOME Shell / Xfce
- Sesso: Maschile
- Località: Potenza
- Contatti:
Re: [Video] VLC provoca un crash
La prossima volta usa la funzione inserisci codice, altrimenti escono messaggi chilometrici 
Cmq mi sembra ci sia un problema con xorg e il driver ati.
Cmq mi sembra ci sia un problema con xorg e il driver ati.
Codice: Seleziona tutto
[ 171.804580] fgl_glxgears[5259] trap divide error rip:2aaaabc88bcd rsp:7fffffb6a8f0 error:0
[ 203.841381] Xorg[4579]: segfault at 0000000000000000 rip 0000000000000000 rsp 0000000000000000 error 14
[ 203.844954] scheduling while atomic: Xorg/0x00000001/4579Chi c’è in linea
Visualizzano questa sezione: 0 utenti iscritti e 1 ospite