Dopo l'aggiornamento X non parte

Prossima versione di Ubuntu in fase di sviluppo e test. Per i precedenti rilasci, consultare «Archivio del forum».
Scrivi risposta
Avatar utente
Telefo
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1369
Iscrizione: sabato 28 ottobre 2006, 12:27
Desktop: Gnome 3
Distribuzione: Ubuntu Gnome 16.04
Sesso: Maschile

Dopo l'aggiornamento X non parte

Messaggio da Telefo »

Rieccomi con la storia infinita di Lubuntu 12.10 e netbook asus 1025c. Il netbook monta un processore dual-core n2800 cedar-trail con video integrato gma3600. Negli ultimi kernel sono inclusi dei driver opensource che girano in 2d e che almeno riconoscono la giusta risoluzione dello schermo, come confermavo in questo post.
Dopo l'ultimo aggiornamento (ma erano parecchi giorni che non aggiornavo e non potrei dire a che data risale), però nemmeno questi driver sembrano funzionare. Infatti X non parte e vengo inviato ad una shell su tty1. Questo è il log:

Codice: Seleziona tutto

[    17.141] 
X.Org X Server 1.12.99.904 (1.13.0 RC 4)
Release Date: 2012-08-07
[    17.141] X Protocol Version 11, Revision 0
[    17.141] Build Operating System: Linux 3.2.0-26-generic i686 Ubuntu
[    17.141] Current Operating System: Linux minuscio 3.5.0-10-generic #10-Ubuntu SMP Mon Aug 13 15:25:53 UTC 2012 i686
[    17.141] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-10-generic root=UUID=c69b8e9c-4b45-4bf8-b896-bcbe69341de6 ro quiet splash
[    17.141] Build Date: 08 August 2012  11:48:12AM
[    17.141] xorg-server 2:1.12.99.904-0ubuntu1 (For technical support please see http://www.ubuntu.com/support) 
[    17.141] Current version of pixman: 0.26.0
[    17.142] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    17.142] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    17.142] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Aug 21 21:31:23 2012
[    17.363] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    17.364] (==) No Layout section.  Using the first Screen section.
[    17.364] (==) No screen section available. Using defaults.
[    17.364] (**) |-->Screen "Default Screen Section" (0)
[    17.364] (**) |   |-->Monitor "<default monitor>"
[    17.364] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    17.364] (==) Automatically adding devices
[    17.365] (==) Automatically enabling devices
[    17.365] (==) Automatically adding GPU devices
[    17.573] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    17.573] 	Entry deleted from font path.
[    17.662] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    17.662] 	Entry deleted from font path.
[    17.735] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    17.735] 	Entry deleted from font path.
[    17.735] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    17.735] 	Entry deleted from font path.
[    17.735] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	built-ins
[    17.735] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    17.735] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    17.735] (II) Loader magic: 0xb7731640
[    17.735] (II) Module ABI versions:
[    17.735] 	X.Org ANSI C Emulation: 0.4
[    17.735] 	X.Org Video Driver: 13.0
[    17.735] 	X.Org XInput driver : 18.0
[    17.735] 	X.Org Server Extension : 6.0
[    17.737] (II) config/udev: Adding drm device (/dev/dri/card0)
[    17.739] (--) PCI:*(0:0:2:0) 8086:0be2:1043:84a9 rev 9, Mem @ 0xdfc00000/1048576, I/O @ 0x0000f0c0/8
[    17.740] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    17.740] Initializing built-in extension Generic Event Extension
[    17.740] Initializing built-in extension SHAPE
[    17.740] Initializing built-in extension MIT-SHM
[    17.740] Initializing built-in extension XInputExtension
[    17.740] Initializing built-in extension XTEST
[    17.740] Initializing built-in extension BIG-REQUESTS
[    17.740] Initializing built-in extension SYNC
[    17.740] Initializing built-in extension XKEYBOARD
[    17.740] Initializing built-in extension XC-MISC
[    17.740] Initializing built-in extension SECURITY
[    17.740] Initializing built-in extension XINERAMA
[    17.740] Initializing built-in extension XFIXES
[    17.740] Initializing built-in extension RENDER
[    17.740] Initializing built-in extension RANDR
[    17.740] Initializing built-in extension COMPOSITE
[    17.740] Initializing built-in extension DAMAGE
[    17.740] Initializing built-in extension MIT-SCREEN-SAVER
[    17.740] Initializing built-in extension DOUBLE-BUFFER
[    17.740] Initializing built-in extension RECORD
[    17.740] Initializing built-in extension DPMS
[    17.740] Initializing built-in extension X-Resource
[    17.740] Initializing built-in extension XVideo
[    17.740] Initializing built-in extension XVideo-MotionCompensation
[    17.741] Initializing built-in extension XFree86-VidModeExtension
[    17.741] Initializing built-in extension XFree86-DGA
[    17.741] Initializing built-in extension XFree86-DRI
[    17.741] Initializing built-in extension DRI2
[    17.741] (II) LoadModule: "glx"
[    17.774] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    17.775] (II) Module glx: vendor="X.Org Foundation"
[    17.775] 	compiled for 1.12.99.904, module version = 1.0.0
[    17.775] 	ABI class: X.Org Server Extension, version 6.0
[    17.775] (==) AIGLX enabled
[    17.775] Loading extension GLX
[    17.775] (==) Matched intel as autoconfigured driver 0
[    17.775] (==) Matched intel as autoconfigured driver 1
[    17.775] (==) Matched vesa as autoconfigured driver 2
[    17.775] (==) Matched modesetting as autoconfigured driver 3
[    17.775] (==) Matched fbdev as autoconfigured driver 4
[    17.775] (==) Assigned the driver to the xf86ConfigLayout
[    17.775] (II) LoadModule: "intel"
[    17.777] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    17.777] (II) Module intel: vendor="X.Org Foundation"
[    17.777] 	compiled for 1.12.99.902, module version = 2.20.3
[    17.777] 	Module class: X.Org Video Driver
[    17.777] 	ABI class: X.Org Video Driver, version 13.0
[    17.777] (II) LoadModule: "vesa"
[    17.778] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    17.778] (II) Module vesa: vendor="X.Org Foundation"
[    17.779] 	compiled for 1.12.99.902, module version = 2.3.2
[    17.779] 	Module class: X.Org Video Driver
[    17.779] 	ABI class: X.Org Video Driver, version 13.0
[    17.779] (II) LoadModule: "modesetting"
[    17.780] (WW) Warning, couldn't open module modesetting
[    17.780] (II) UnloadModule: "modesetting"
[    17.780] (II) Unloading modesetting
[    17.780] (EE) Failed to load module "modesetting" (module does not exist, 0)
[    17.780] (II) LoadModule: "fbdev"
[    17.781] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    17.781] (II) Module fbdev: vendor="X.Org Foundation"
[    17.781] 	compiled for 1.12.99.902, module version = 0.4.3
[    17.781] 	Module class: X.Org Video Driver
[    17.781] 	ABI class: X.Org Video Driver, version 13.0
[    17.781] (==) Matched intel as autoconfigured driver 0
[    17.781] (==) Matched intel as autoconfigured driver 1
[    17.781] (==) Matched vesa as autoconfigured driver 2
[    17.781] (==) Matched modesetting as autoconfigured driver 3
[    17.782] (==) Matched fbdev as autoconfigured driver 4
[    17.782] (==) Assigned the driver to the xf86ConfigLayout
[    17.782] (II) LoadModule: "intel"
[    17.783] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    17.783] (II) Module intel: vendor="X.Org Foundation"
[    17.783] 	compiled for 1.12.99.902, module version = 2.20.3
[    17.783] 	Module class: X.Org Video Driver
[    17.783] 	ABI class: X.Org Video Driver, version 13.0
[    17.783] (II) UnloadModule: "intel"
[    17.783] (II) Unloading intel
[    17.783] (II) Failed to load module "intel" (already loaded, -1217461214)
[    17.783] (II) LoadModule: "vesa"
[    17.784] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    17.784] (II) Module vesa: vendor="X.Org Foundation"
[    17.784] 	compiled for 1.12.99.902, module version = 2.3.2
[    17.784] 	Module class: X.Org Video Driver
[    17.784] 	ABI class: X.Org Video Driver, version 13.0
[    17.784] (II) UnloadModule: "vesa"
[    17.784] (II) Unloading vesa
[    17.784] (II) Failed to load module "vesa" (already loaded, -1217461214)
[    17.784] (II) LoadModule: "modesetting"
[    17.785] (WW) Warning, couldn't open module modesetting
[    17.785] (II) UnloadModule: "modesetting"
[    17.785] (II) Unloading modesetting
[    17.785] (EE) Failed to load module "modesetting" (module does not exist, 0)
[    17.785] (II) LoadModule: "fbdev"
[    17.786] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    17.786] (II) Module fbdev: vendor="X.Org Foundation"
[    17.786] 	compiled for 1.12.99.902, module version = 0.4.3
[    17.786] 	Module class: X.Org Video Driver
[    17.786] 	ABI class: X.Org Video Driver, version 13.0
[    17.786] (II) UnloadModule: "fbdev"
[    17.786] (II) Unloading fbdev
[    17.786] (II) Failed to load module "fbdev" (already loaded, 0)
[    17.786] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
	Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
	Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
	Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
	Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
	Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
	Ivybridge Server (GT2)
[    17.788] (II) VESA: driver for VESA chipsets: vesa
[    17.788] (II) FBDEV: driver for framebuffer: fbdev
[    17.788] (++) using VT number 7

[    17.793] (WW) Falling back to old probe method for vesa
[    17.793] (WW) Falling back to old probe method for fbdev
[    17.794] (II) Loading sub module "fbdevhw"
[    17.794] (II) LoadModule: "fbdevhw"
[    17.794] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    17.794] (II) Module fbdevhw: vendor="X.Org Foundation"
[    17.795] 	compiled for 1.12.99.904, module version = 0.0.2
[    17.795] 	ABI class: X.Org Video Driver, version 13.0
[    17.795] (EE) intel(0): [drm] Failed to detect GEM.  Kernel 2.6.28 required.
[    17.795] (EE) intel(0): Failed to become DRM master.
[    17.795] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    17.795] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    17.795] (==) intel(0): RGB weight 888
[    17.795] (==) intel(0): Default visual is TrueColor
[    17.796] (WW) intel(0): unknown chipset
[    17.796] (II) UnloadModule: "intel"
[    17.796] (EE) Screen(s) found, but none have a usable configuration.
[    17.796] 
Fatal server error:
[    17.796] no screens found
[    17.796] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[    17.796] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[    17.796] (EE) 
[    17.805] Server terminated with error (1). Closing log file.
Come si può vedere l'errore principale è
(EE) Screen(s) found, but none have a usable configuration.
Francamente non saprei come procedere. sono disponibile a prove ardue ;-)
Forsan et haec olim meminisse iuvabit...
Avatar utente
trekfan1
Moderatore Globale
Moderatore Globale
Messaggi: 23518
Iscrizione: domenica 21 maggio 2006, 10:51
Desktop: Gnome
Distribuzione: Ubuntu 23.10 e 24.04 (dev)
Sesso: Maschile
Località: Formigine (MO) | Accecante Asceta

Re: Dopo l'aggiornamento X non parte

Messaggio da trekfan1 »

Il fatto è che forse il problema potrebbe derivare dall'eliminazione di Unity 2D che è diventato un pacchetto "virtuale".
Avatar utente
Telefo
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1369
Iscrizione: sabato 28 ottobre 2006, 12:27
Desktop: Gnome 3
Distribuzione: Ubuntu Gnome 16.04
Sesso: Maschile

Re: Dopo l'aggiornamento X non parte

Messaggio da Telefo »

Ma io ho lxde non unity
Forsan et haec olim meminisse iuvabit...
Avatar utente
trekfan1
Moderatore Globale
Moderatore Globale
Messaggi: 23518
Iscrizione: domenica 21 maggio 2006, 10:51
Desktop: Gnome
Distribuzione: Ubuntu 23.10 e 24.04 (dev)
Sesso: Maschile
Località: Formigine (MO) | Accecante Asceta

Re: Dopo l'aggiornamento X non parte

Messaggio da trekfan1 »

ah ops, mi sa che ho letto di fretta, scusa. :)
riki79
Prode Principiante
Messaggi: 41
Iscrizione: giovedì 14 febbraio 2008, 18:00
Desktop: Unity
Distribuzione: Ubuntu 14.04 LTS
Località: Verona

Re: Dopo l'aggiornamento X non parte

Messaggio da riki79 »

Se può essere utile condivido la mia soluzione su:
- Netbook ASUS 1015CX
- scheda video Intel GMA3600
- Lubuntu 12.04

In parole povere ho aggiornato il kernel.
Ecco i comandi da eseguire:
wget -O linux-kernel-3.5.2 http://goo.gl/sy5Y0
chmod +x linux-kernel-3.5.2
sudo sh linux-kernel-3.5.2
Avatar utente
mibofra
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 2075
Iscrizione: venerdì 25 maggio 2012, 0:01
Desktop: Mate
Distribuzione: Ubuntu 17.04/ParrotSec OS
Sesso: Maschile
Località: Palermo
Contatti:

Re: Dopo l'aggiornamento X non parte

Messaggio da mibofra »

Posso sempre aiutarti a creare un file di configurazione xorg.conf e modificarlo per le tue esigenze, allora X userà quel file per le impostazioni, chiedi pure se ti va, solo che ci vuole un pò di tempo, ma alla fine il risultato è funzionante, vuoi tentare :D ?
Portatile principale: ASUS X550JX con Ubuntu 17.04 e ParrotSec OS 3.7 onboard
Portatile secondario: ASUS T200TA con Ubuntu 17.04 onboard
Server "domestico": ASUS Q170T + i7 6700 + 32 GB RAM Corsair Vengeance con OpenSUSE Tumbleweed onboard
Avatar utente
Telefo
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1369
Iscrizione: sabato 28 ottobre 2006, 12:27
Desktop: Gnome 3
Distribuzione: Ubuntu Gnome 16.04
Sesso: Maschile

Re: Dopo l'aggiornamento X non parte

Messaggio da Telefo »

Certo che l'aiuto è ben accetto :-) Io ho giò fatto il primo passo creando uno xrog.conf nuovo, con

Codice: Seleziona tutto

sudo Xorg -configure
ma senza ulteriori aggiustamenti ovviamente non andava.
il driver deve essere intel?
intanto ecco il mio xorg.conf.new creato

Codice: Seleziona tutto

Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
	Screen      1  "Screen1" RightOf "Screen0"
	Screen      2  "Screen2" RightOf "Screen1"
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	ModulePath   "/usr/lib/xorg/modules"
	FontPath     "/usr/share/fonts/X11/misc"
	FontPath     "/usr/share/fonts/X11/cyrillic"
	FontPath     "/usr/share/fonts/X11/100dpi/:unscaled"
	FontPath     "/usr/share/fonts/X11/75dpi/:unscaled"
	FontPath     "/usr/share/fonts/X11/Type1"
	FontPath     "/usr/share/fonts/X11/100dpi"
	FontPath     "/usr/share/fonts/X11/75dpi"
	FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
	FontPath     "built-ins"
EndSection

Section "Module"
	Load  "glx"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
EndSection

Section "Monitor"
	Identifier   "Monitor1"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
EndSection

Section "Monitor"
	Identifier   "Monitor2"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "NoAccel"            	# [<bool>]
        #Option     "AccelMethod"        	# <str>
        #Option     "DRI"                	# [<bool>]
        #Option     "ColorKey"           	# <i>
        #Option     "VideoKey"           	# <i>
        #Option     "Tiling"             	# [<bool>]
        #Option     "LinearFramebuffer"  	# [<bool>]
        #Option     "SwapbuffersWait"    	# [<bool>]
        #Option     "XvPreferOverlay"    	# [<bool>]
        #Option     "HotPlug"            	# [<bool>]
        #Option     "RelaxedFencing"     	# [<bool>]
        #Option     "Throttle"           	# [<bool>]
        #Option     "ZaphodHeads"        	# <str>
        #Option     "DelayedFlush"       	# [<bool>]
        #Option     "TearFree"           	# [<bool>]
        #Option     "PerCrtcPixmaps"     	# [<bool>]
        #Option     "FallbackDebug"      	# [<bool>]
        #Option     "DebugFlushBatches"  	# [<bool>]
        #Option     "DebugFlushCaches"   	# [<bool>]
        #Option     "DebugWait"          	# [<bool>]
        #Option     "BufferCache"        	# [<bool>]
        #Option     "TripleBuffer"       	# [<bool>]
	Identifier  "Card0"
	Driver      "intel"
	BusID       "PCI:0:2:0"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "ShadowFB"           	# [<bool>]
        #Option     "Rotate"             	# <str>
        #Option     "fbdev"              	# <str>
        #Option     "debug"              	# [<bool>]
	Identifier  "Card1"
	Driver      "fbdev"
	BusID       "PCI:0:2:0"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "ShadowFB"           	# [<bool>]
        #Option     "DefaultRefresh"     	# [<bool>]
        #Option     "ModeSetClearScreen" 	# [<bool>]
	Identifier  "Card2"
	Driver      "vesa"
	BusID       "PCI:0:2:0"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	SubSection "Display"
		Viewport   0 0
		Depth     1
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     4
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     15
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

Section "Screen"
	Identifier "Screen1"
	Device     "Card1"
	Monitor    "Monitor1"
	SubSection "Display"
		Viewport   0 0
		Depth     1
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     4
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     15
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

Section "Screen"
	Identifier "Screen2"
	Device     "Card2"
	Monitor    "Monitor2"
	SubSection "Display"
		Viewport   0 0
		Depth     1
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     4
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     15
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection
Forsan et haec olim meminisse iuvabit...
Avatar utente
mibofra
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 2075
Iscrizione: venerdì 25 maggio 2012, 0:01
Desktop: Mate
Distribuzione: Ubuntu 17.04/ParrotSec OS
Sesso: Maschile
Località: Palermo
Contatti:

Re: Dopo l'aggiornamento X non parte

Messaggio da mibofra »

Se la tua scheda video è intel :D , se no

Codice: Seleziona tutto

lshw
che vedo io che sceda video è :D .
Portatile principale: ASUS X550JX con Ubuntu 17.04 e ParrotSec OS 3.7 onboard
Portatile secondario: ASUS T200TA con Ubuntu 17.04 onboard
Server "domestico": ASUS Q170T + i7 6700 + 32 GB RAM Corsair Vengeance con OpenSUSE Tumbleweed onboard
Avatar utente
Telefo
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1369
Iscrizione: sabato 28 ottobre 2006, 12:27
Desktop: Gnome 3
Distribuzione: Ubuntu Gnome 16.04
Sesso: Maschile

Re: Dopo l'aggiornamento X non parte

Messaggio da Telefo »

Sì è intel.
Telefo ha scritto:Il netbook monta un processore dual-core n2800 cedar-trail con video integrato gma3600. Negli ultimi kernel sono inclusi dei driver opensource che girano in 2d e che almeno riconoscono la giusta risoluzione dello schermo, come confermavo in questo post.
Vorrei fugare ogni dubbio. stiamo parlando della stessa cosa che in questo post sul forum internazionale è arrivata a 15 pagine di discussione:
http://ubuntuforums.org/showthread.php?t=1953734
per le schede integrate con i processori intel n2600/n2800 ci sono ancora questi driver in rodaggio nelle ultime versioni del kernel, ma non sono stati rilasciati dei driver veramente funzionanti, come si può vedere ad esempio dalle diverse richieste fatte a intel, come questa:
http://communities.intel.com/thread/28472
o questa
http://communities.intel.com/thread/29157
giusto per fare due esempi.
Il problema dunque è dei driver che non funzionano, non di uno xorg fatto male. Detto questo però sono disposto a fare qualche prova. Appena sono sul netbook ti posto lshw.
Forsan et haec olim meminisse iuvabit...
Avatar utente
mibofra
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 2075
Iscrizione: venerdì 25 maggio 2012, 0:01
Desktop: Mate
Distribuzione: Ubuntu 17.04/ParrotSec OS
Sesso: Maschile
Località: Palermo
Contatti:

Re: Dopo l'aggiornamento X non parte

Messaggio da mibofra »

Questo lo sapevo, ma si può sempre forzare xorg a far funzionare gli intel, anche perché almeno i vesa dovrebbero andare , e invece :D P.S. Puoi sempre prendere l'ultima versione del kernel che trovi pacchettizzata , ho ti scarichi gli ultimissimi sorgenti del kernel dal launchpad o da http://www.kernel.org :D e ricompilarlo :) .
Portatile principale: ASUS X550JX con Ubuntu 17.04 e ParrotSec OS 3.7 onboard
Portatile secondario: ASUS T200TA con Ubuntu 17.04 onboard
Server "domestico": ASUS Q170T + i7 6700 + 32 GB RAM Corsair Vengeance con OpenSUSE Tumbleweed onboard
Scrivi risposta

Ritorna a “Quantal Quetzal 12.10”

Chi c’è in linea

Visualizzano questa sezione: 0 utenti iscritti e 1 ospite