[Install] iMPOSSIBILE OTTENERE IL LOCK

Domande e richieste di un principiante alle prime armi con Ubuntu e il mondo GNU/Linux in generale. Per domande specifiche, utilizzare le altre sezioni.
Regole della sezione
In questa sezione possono inserire nuove discussioni solo coloro che fanno parte del livello "Prode Principiante" e che non hanno superato i 100 messaggi, tutti gli altri possono comunque rispondere regolarmente. Se si fa parte di questo livello e si è registrati al forum prima del 24 aprile 2012, data del passaggio al nuovo forum, consultare questa discussione.

Immagine Come usare UbuntuPrimi passi su Ubuntu Immagine Amministrazione del sistemaComandi di baseInstallare programmiLog di sistemaRiga di comandoSudo
Avatar utente
e
Prode Principiante
Messaggi: 139
Iscrizione: venerdì 29 settembre 2006, 15:07
Contatti:

NTFS-3g

Messaggio da e »

Questo è il mio fstab. I privilegi??? Tutti e la directory /media/Berenice

Codice: Seleziona tutto

# /etc/fstab: static file system information.
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    defaults        0       0
/dev/hda1       /               ext3    defaults,errors=remount-ro 0       1
/dev/hda5       none            swap    sw              0       0
/dev/hdc        /media/cdrom0   udf,iso9660 user,noauto     0       0
/dev/sda1       /media/Berenice    ntfs-3g silent,umask=0,locale=it_IT.utf8 0 0
Hai qualche consiglio????
Tommy
Avatar utente
MaraMax
Imperturbabile Insigne
Imperturbabile Insigne
Messaggi: 3639
Iscrizione: domenica 12 marzo 2006, 22:25
Località: Altopiano di Asiago

NTFS-3g

Messaggio da MaraMax »

proviamo a vedere i permessi con
ls -l /media/

(visualizza la lista completa di cartelle e file contenuti in /media/)
"L'uomo è buono finché gli conviene." (R. Gervaso)
"Il sesso è come il bridge; se non hai un buon partner devi avere una buona mano." (C. Pierce)
maramax@jabber.linux.it
Avatar utente
e
Prode Principiante
Messaggi: 139
Iscrizione: venerdì 29 settembre 2006, 15:07
Contatti:

NTFS-3g

Messaggio da e »

Sembra che ci siano i permessi....

Codice: Seleziona tutto

root@ederoso-laptop:/home/ederoso# ls -l /media/
totale 8
drwxrwxrwx 1 root root 4096 2007-01-08 18:02 Berenice
lrwxrwxrwx 1 root root    6 2007-01-09 15:53 cdrom -> cdrom0
drwxr-xr-x 2 root root 4096 2007-01-09 15:53 cdrom0
root@ederoso-laptop:/home/ederoso#
Che dici??? Se vuoi ti do l'output di altro...
Tommy
Avatar utente
MaraMax
Imperturbabile Insigne
Imperturbabile Insigne
Messaggi: 3639
Iscrizione: domenica 12 marzo 2006, 22:25
Località: Altopiano di Asiago

NTFS-3g

Messaggio da MaraMax »

non so che dire...
ho appena provato ad installarlo io seguendo la guida passo per passo e funziona.
"L'uomo è buono finché gli conviene." (R. Gervaso)
"Il sesso è come il bridge; se non hai un buon partner devi avere una buona mano." (C. Pierce)
maramax@jabber.linux.it
Avatar utente
e
Prode Principiante
Messaggi: 139
Iscrizione: venerdì 29 settembre 2006, 15:07
Contatti:

NTFS-3g

Messaggio da e »

Questa è bella.
Se vado su fyle system>media>Berenice mi permette di scrivere ma l'icona non appare sul desktop come succede di solito.
Come potrei farla comparire??? ???
Tommy
Avatar utente
e
Prode Principiante
Messaggi: 139
Iscrizione: venerdì 29 settembre 2006, 15:07
Contatti:

NTFS-3g

Messaggio da e »

Questo è l'output di dmesg.
Qualcuno che mi dica come mai non appare l'icona sul mio desktop per favore...

Codice: Seleziona tutto

root@ederoso-laptop:/home/ederoso# dmesg
[17179569.184000] Linux version 2.6.15-27-386 (buildd@terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Fri Dec 8 17:51:56 UTC 2006
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[17179569.184000]  BIOS-e820: 0000000000100000 - 000000000f7d0000 (usable)
[17179569.184000]  BIOS-e820: 000000000f7d0000 - 000000000f7df000 (ACPI data)
[17179569.184000]  BIOS-e820: 000000000f7df000 - 000000000f800000 (ACPI NVS)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 247MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 63440
[17179569.184000]   DMA zone: 4096 pages, LIFO batch:0
[17179569.184000]   DMA32 zone: 0 pages, LIFO batch:0
[17179569.184000]   Normal zone: 59344 pages, LIFO batch:15
[17179569.184000]   HighMem zone: 0 pages, LIFO batch:0
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 ACPIAM                                ) @ 0x000f59f0
[17179569.184000] ACPI: RSDT (v001 A M I  OEMRSDT  0x07000423 MSFT 0x00000097) @ 0x0f7d0000
[17179569.184000] ACPI: FADT (v002 A M I  OEMFACP  0x07000423 MSFT 0x00000097) @ 0x0f7d0200
[17179569.184000] ACPI: OEMB (v001 A M I  AMI_OEM  0x07000423 MSFT 0x00000097) @ 0x0f7df040
[17179569.184000] ACPI: SSDT (v001    AMI   CPU1PM 0x00000001 INTL 0x02002026) @ 0x0f7d39d0
[17179569.184000] ACPI: DSDT (v001  0ABCM 0ABCM008 0x00000008 INTL 0x02002026) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x408
[17179569.184000] Allocating PCI resources starting at 10000000 (gap: 0f800000:f0800000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hda1 ro quiet splash
[17179569.184000] Found and enabled local APIC!
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 1024 (order: 10, 16384 bytes)
[17179569.184000] Detected 1500.212 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179569.404000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179569.404000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[17179569.408000] Memory: 241076k/253760k available (1976k kernel code, 12096k reserved, 606k data, 288k init, 0k highmem)
[17179569.408000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179569.488000] Calibrating delay using timer specific routine.. 3002.69 BogoMIPS (lpj=6005386)
[17179569.488000] Security Framework v1.0.0 initialized
[17179569.488000] SELinux:  Disabled at boot.
[17179569.488000] Mount-cache hash table entries: 512
[17179569.488000] CPU: After generic identify, caps: afe9fbbf 00000000 00000000 00000000 00000180 00000000 00000000
[17179569.488000] CPU: After vendor identify, caps: afe9fbbf 00000000 00000000 00000000 00000180 00000000 00000000
[17179569.488000] CPU: L1 I cache: 32K, L1 D cache: 32K
[17179569.488000] CPU: L2 cache: 2048K
[17179569.488000] CPU: After all inits, caps: afe9fbbf 00000000 00000000 00000040 00000180 00000000 00000000
[17179569.488000] mtrr: v2.0 (20020519)
[17179569.488000] CPU: Intel(R) Pentium(R) M processor 1.50GHz stepping 06
[17179569.488000] Enabling fast FPU save and restore... done.
[17179569.488000] Enabling unmasked SIMD FPU exception support... done.
[17179569.488000] Checking 'hlt' instruction... OK.
[17179569.504000] checking if image is initramfs... it is
[17179570.196000] Freeing initrd memory: 6616k freed
[17179570.204000] ACPI: Looking for DSDT ... not found!
[17179570.204000] ACPI: setting ELCR to 0200 (from 0c00)
[17179570.360000] NET: Registered protocol family 16
[17179570.360000] EISA bus registered
[17179570.360000] ACPI: bus type pci registered
[17179570.360000] PCI: Using configuration type 1
[17179570.360000] ACPI: Subsystem revision 20051216
[17179570.364000] ACPI: Interpreter enabled
[17179570.364000] ACPI: Using PIC for interrupt routing
[17179570.364000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179570.364000] PCI: Probing PCI hardware (bus 00)
[17179570.368000] Boot video device is 0000:00:02.0
[17179570.368000] PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
[17179570.368000] PCI quirk: region 0500-053f claimed by ICH4 GPIO
[17179570.368000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[17179570.368000] PCI: Transparent bridge - 0000:00:1e.0
[17179570.368000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179570.372000] ACPI: Embedded Controller [EC] (gpe 28) interrupt mode.
[17179570.380000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[17179570.380000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12)
[17179570.380000] ACPI: PCI Interrupt Link [LNKB] (IRQs *11)
[17179570.380000] ACPI: PCI Interrupt Link [LNKC] (IRQs *10)
[17179570.380000] ACPI: PCI Interrupt Link [LNKD] (IRQs *10)
[17179570.380000] ACPI: PCI Interrupt Link [LNKE] (IRQs 11) *0, disabled.
[17179570.380000] ACPI: PCI Interrupt Link [LNKF] (IRQs *11)
[17179570.380000] ACPI: PCI Interrupt Link [LNKG] (IRQs *11)
[17179570.380000] ACPI: PCI Interrupt Link [LNKH] (IRQs *10)
[17179570.380000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179570.380000] pnp: PnP ACPI init
[17179570.388000] pnp: PnP ACPI: found 10 devices
[17179570.388000] PnPBIOS: Disabled by ACPI PNP
[17179570.388000] PCI: Using ACPI for IRQ routing
[17179570.388000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[17179570.388000] pnp: 00:06: ioport range 0x600-0x67f has been reserved
[17179570.388000] pnp: 00:08: ioport range 0x6a0-0x6a0 has been reserved
[17179570.388000] pnp: 00:08: ioport range 0x1100-0x113f has been reserved
[17179570.388000] pnp: 00:08: ioport range 0x1254-0x1254 has been reserved
[17179570.388000] pnp: 00:08: ioport range 0x12d4-0x12d4 has been reserved
[17179570.388000] pnp: 00:08: ioport range 0x1300-0x1375 has been reserved
[17179570.388000] pnp: 00:08: ioport range 0x1377-0x137f has been reserved
[17179570.388000] pnp: 00:08: ioport range 0x1376-0x1376 has been reserved
[17179570.388000] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
[17179570.388000] PCI: Bus 2, cardbus bridge: 0000:01:04.0
[17179570.388000]   IO window: 0000c000-0000c0ff
[17179570.388000]   IO window: 0000c400-0000c4ff
[17179570.388000]   PREFETCH window: 10000000-11ffffff
[17179570.388000]   MEM window: 14000000-15ffffff
[17179570.388000] PCI: Bridge: 0000:00:1e.0
[17179570.388000]   IO window: c000-cfff
[17179570.388000]   MEM window: e0000000-e00fffff
[17179570.388000]   PREFETCH window: 10000000-11ffffff
[17179570.388000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[17179570.388000] **** SET: Misaligned resource pointer: ce1dc5c2 Type 07 Len 0
[17179570.388000] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
[17179570.388000] PCI: setting IRQ 11 as level-triggered
[17179570.388000] ACPI: PCI Interrupt 0000:01:04.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
[17179570.388000] PCI: Setting latency timer of device 0000:01:04.0 to 64
[17179570.388000] audit: initializing netlink socket (disabled)
[17179570.388000] audit(1168511678.388:1): initialized
[17179570.388000] VFS: Disk quotas dquot_6.5.1
[17179570.388000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179570.388000] Initializing Cryptographic API
[17179570.388000] io scheduler noop registered
[17179570.388000] io scheduler anticipatory registered
[17179570.388000] io scheduler deadline registered
[17179570.388000] io scheduler cfq registered
[17179570.388000] isapnp: Scanning for PnP cards...
[17179570.744000] isapnp: No Plug & Play device found
[17179570.756000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f12:PS2M] at 0x60,0x64 irq 1,12
[17179570.764000] i8042.c: Detected active multiplexing controller, rev 1.1.
[17179570.764000] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[17179570.772000] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[17179570.772000] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[17179570.772000] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[17179570.772000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179570.772000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[17179570.776000] **** SET: Misaligned resource pointer: cf69d1c2 Type 07 Len 0
[17179570.776000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[17179570.776000] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[17179570.776000] ACPI: PCI interrupt for device 0000:00:1f.6 disabled
[17179570.776000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179570.776000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179570.776000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179570.776000] mice: PS/2 mouse device common for all mice
[17179570.776000] EISA: Probing bus 0 at eisa.0
[17179570.776000] EISA: Detected 0 cards.
[17179570.776000] NET: Registered protocol family 2
[17179570.796000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179570.820000] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)[17179570.820000] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[17179570.820000] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[17179570.820000] TCP: Hash tables configured (established 8192 bind 8192)
[17179570.820000] TCP reno registered
[17179570.820000] TCP bic registered
[17179570.820000] NET: Registered protocol family 1
[17179570.820000] NET: Registered protocol family 8
[17179570.820000] NET: Registered protocol family 20
[17179570.820000] Using IPI Shortcut mode
[17179570.820000] ACPI wakeup devices:
[17179570.820000] SMBS AUDI MODM USB1 USB2 USB3 CBC0  LAN MPC0 MPC1
[17179570.820000] ACPI: (supports S0 S1 S3 S4 S5)
[17179570.820000] Freeing unused kernel memory: 288k freed
[17179570.864000] vga16fb: initializing
[17179570.864000] vga16fb: mapped to 0xc00a0000
[17179570.976000] Console: switching to colour frame buffer device 80x25
[17179570.976000] fb0: VGA16 VGA frame buffer device
[17179571.996000] Capability LSM initialized
[17179572.092000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[17179572.092000] ACPI: Processor [CPU1] (supports 8 throttling states)
[17179572.444000] ICH4: IDE controller at PCI slot 0000:00:1f.1
[17179572.444000] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
[17179572.444000] **** SET: Misaligned resource pointer: cf6931c2 Type 07 Len 0
[17179572.444000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[17179572.444000] PCI: setting IRQ 10 as level-triggered
[17179572.444000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
[17179572.444000] ICH4: chipset revision 3
[17179572.444000] ICH4: not 100% native mode: will probe irqs later
[17179572.444000]     ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
[17179572.444000]     ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
[17179572.444000] Probing IDE interface ide0...
[17179572.732000] hda: TOSHIBA MK4025GAS, ATA DISK drive
[17179573.404000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179573.452000] Probing IDE interface ide1...
[17179574.188000] hdc: QSI CD-RW/DVD-ROM SBW-241, ATAPI CD/DVD-ROM drive
[17179574.524000] ide1 at 0x170-0x177,0x376 on irq 15
[17179574.528000] hda: max request size: 128KiB
[17179574.536000] hda: 78140160 sectors (40007 MB), CHS=65535/16/63, UDMA(100)
[17179574.536000] hda: cache flushes supported
[17179574.536000]  hda: hda1 hda2 < hda5 >
[17179574.616000] hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179574.616000] Uniform CD-ROM driver Revision: 3.20
[17179574.864000] usbcore: registered new driver usbfs
[17179574.864000] usbcore: registered new driver hub
[17179574.864000] USB Universal Host Controller Interface driver v2.3
[17179574.864000] **** SET: Misaligned resource pointer: cf41d502 Type 07 Len 0
[17179574.864000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[17179574.864000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[17179574.864000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[17179574.864000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[17179574.864000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[17179574.864000] uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000d800
[17179574.864000] hub 1-0:1.0: USB hub found
[17179574.864000] hub 1-0:1.0: 2 ports detected
[17179574.928000] ieee1394: Initialized config rom entry `ip1394'
[17179574.968000] **** SET: Misaligned resource pointer: cf3cfec2 Type 07 Len 0
[17179574.968000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
[17179574.968000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
[17179574.968000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[17179574.968000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[17179574.968000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[17179574.968000] uhci_hcd 0000:00:1d.1: irq 10, io base 0x0000d880
[17179574.968000] hub 2-0:1.0: USB hub found
[17179574.968000] hub 2-0:1.0: 2 ports detected
[17179575.072000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
[17179575.072000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[17179575.072000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[17179575.072000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[17179575.072000] uhci_hcd 0000:00:1d.2: irq 10, io base 0x0000dc00
[17179575.072000] hub 3-0:1.0: USB hub found
[17179575.072000] hub 3-0:1.0: 2 ports detected
[17179575.176000] **** SET: Misaligned resource pointer: cf3cf8c2 Type 07 Len 0
[17179575.176000] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
[17179575.176000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10
[17179575.176000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[17179575.176000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[17179575.176000] ehci_hcd 0000:00:1d.7: debug port 1
[17179575.176000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[17179575.176000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
[17179575.176000] ehci_hcd 0000:00:1d.7: irq 10, io mem 0xe01ff400
[17179575.180000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179575.180000] hub 4-0:1.0: USB hub found
[17179575.180000] hub 4-0:1.0: 6 ports detected
[17179575.208000] usb 1-1: new full speed USB device using uhci_hcd and address 2
[17179575.284000] ohci1394: $Rev: 1313 $ Ben Collins <bcollins@debian.org>
[17179575.284000] **** SET: Misaligned resource pointer: cf3cf5c2 Type 07 Len 0
[17179575.284000] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
[17179575.284000] ACPI: PCI Interrupt 0000:01:04.1[B] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11
[17179575.336000] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11]  MMIO=[e00ff800-e00fffff]  Max Packet=[2048]
[17179575.496000] Attempting manual resume
[17179575.564000] EXT3-fs: mounted filesystem with ordered data mode.
[17179575.576000] kjournald starting.  Commit interval 5 seconds
[17179575.640000] usb 4-1: new high speed USB device using ehci_hcd and address 2
[17179576.320000] usb 2-1: new low speed USB device using uhci_hcd and address 2[17179576.616000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00000ae6ff2327a4]
[17179586.092000] Linux agpgart interface v0.101 (c) Dave Jones
[17179586.108000] agpgart: Detected an Intel 855 Chipset.
[17179586.108000] agpgart: Detected 8060K stolen memory.
[17179586.116000] agpgart: AGP aperture is 128M @ 0xd8000000
[17179586.448000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179586.456000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179586.480000] hw_random hardware driver 1.0.0 loaded
[17179586.580000] usbcore: registered new driver hiddev
[17179586.596000] input: Acrox USB & PS/2 Mouse as /class/input/input1
[17179586.596000] input: USB HID v1.10 Mouse [Acrox USB & PS/2 Mouse] on usb-0000:00:1d.1-1
[17179586.596000] usbcore: registered new driver usbhid
[17179586.596000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179586.732000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[17179586.732000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[17179586.820000] Real Time Clock Driver v1.12
[17179586.856000] input: PC Speaker as /class/input/input2
[17179587.096000] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x1d6eb1, caps: 0xa04713/0x4006
[17179587.140000] input: SynPS/2 Synaptics TouchPad as /class/input/input3
[17179587.144000] ts: Compaq touchscreen protocol output
[17179587.444000] 8139too Fast Ethernet driver 0.9.27
[17179587.504000] ieee80211_1_1_13_crypt: registered algorithm 'NULL'
[17179587.504000] ieee80211_1_1_13: 802.11 data/management/control stack, 1.1.13[17179587.504000] ieee80211_1_1_13: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[17179587.524000] SCSI subsystem initialized
[17179587.540000] ieee80211_crypt: registered algorithm 'NULL'
[17179587.548000] ieee80211: 802.11 data/management/control stack, git-1.1.7
[17179587.548000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[17179587.552000] intel8x0_measure_ac97_clock: measured 55445 usecs
[17179587.552000] intel8x0: clocking to 48000
[17179587.552000] **** SET: Misaligned resource pointer: c9c09bc2 Type 07 Len 0
[17179587.552000] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11
[17179587.552000] ACPI: PCI Interrupt 0000:01:03.0[A] -> Link [LNKG] -> GSI 11 (level, low) -> IRQ 11
[17179587.552000] eth0: RealTek RTL8139 at 0xd02c2400, 00:11:5b:1f:f1:09, IRQ 11[17179587.552000] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
[17179587.552000] ACPI: PCI Interrupt 0000:01:04.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
[17179587.552000] Yenta: CardBus bridge found at 0000:01:04.0 [1019:0f44]
[17179587.552000] Initializing USB Mass Storage driver...
[17179587.552000] scsi0 : SCSI emulation for USB Mass Storage devices
[17179587.552000] usb-storage: device found at 2
[17179587.552000] usb-storage: waiting for device to settle before scanning
[17179587.552000] usbcore: registered new driver usb-storage
[17179587.552000] USB Mass Storage support registered.
[17179587.572000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[17179587.592000] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.1.1[17179587.592000] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[17179587.592000] Warning: PCI driver ipw2200 has a struct device_driver shutdown method, please update!
[17179587.592000] ACPI: PCI Interrupt 0000:01:02.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[17179587.592000] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection[17179587.680000] Yenta: ISA IRQ mask 0x00b8, PCI irq 11
[17179587.680000] Socket status: 30000006
[17179587.680000] Yenta: Raising subordinate bus# of parent bus (#01) from #01 to #05
[17179587.680000] pcmcia: parent PCI bridge I/O window: 0xc000 - 0xcfff
[17179587.680000] cs: IO port probe 0xc000-0xcfff: clean.
[17179587.680000] pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xe00fffff
[17179587.680000] pcmcia: parent PCI bridge Memory window: 0x10000000 - 0x11ffffff
[17179588.180000] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
[17179588.576000] cs: IO port probe 0x100-0x3af: clean.
[17179588.580000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[17179588.580000] cs: IO port probe 0x820-0x8ff: clean.
[17179588.580000] cs: IO port probe 0xc00-0xcf7: clean.
[17179588.580000] cs: IO port probe 0xa00-0xaff: clean.
[17179588.996000] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[17179589.648000] lp: driver loaded but no devices found
[17179589.688000] sbp2: $Rev: 1306 $ Ben Collins <bcollins@debian.org>
[17179589.688000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[17179589.688000] ieee1394: sbp2: Try serialize_io=0 for better performance
[17179589.756000] Adding 730916k swap on /dev/hda5.  Priority:-1 extents:1 across:730916k
[17179589.876000] EXT3 FS on hda1, internal journal
[17179590.052000] NET: Registered protocol family 17
[17179590.068000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179590.068000] md: bitmap version 4.39
[17179590.816000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[17179591.620000] NET: Registered protocol family 10
[17179591.620000] lo: Disabled Privacy Extensions
[17179591.620000] IPv6 over IPv4 tunneling driver
[17179591.628000] eth1: NETDEV_TX_BUSY returned; driver should report queue full via ieee_device->is_queue_full.
[17179591.724000] cdrom: open failed.
[17179592.584000]   Vendor: TOSHIBA   Model: MK1032GAX         Rev: AB21
[17179592.584000]   Type:   Direct-Access                      ANSI SCSI revision: 00
[17179592.588000] usb-storage: device scan complete
[17179592.736000] Driver 'sd' needs updating - please use bus_type methods
[17179592.764000] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
[17179592.764000] sda: assuming drive cache: write through
[17179592.772000] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
[17179592.772000] sda: assuming drive cache: write through
[17179592.772000]  sda: sda1
[17179593.116000] sd 0:0:0:0: Attached scsi disk sda
[17179593.124000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[17179596.876000] ACPI: AC Adapter [ADP0] (on-line)
[17179596.892000] ACPI: Battery Slot [BAT0] (battery present)
[17179596.968000] ACPI: Power Button (FF) [PWRF]
[17179596.972000] ACPI: Power Button (CM) [PWRB]
[17179596.972000] ACPI: Lid Switch [LID0]
[17179597.060000] ibm_acpi: ec object not found
[17179597.088000] pcc_acpi: loading...
[17179597.188000] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[17179602.272000] eth1: no IPv6 routers present
[17179602.412000] eth0: no IPv6 routers present
[17179604.028000] [drm] Initialized drm 1.0.1 20051102
[17179604.088000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[17179604.088000] [drm] Initialized i915 1.4.0 20060119 on minor 0
[17179604.088000] [drm] Initialized i915 1.4.0 20060119 on minor 1
[17179605.824000] ppdev: user-space parallel port driver
[17179606.380000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[17179606.380000] apm: overridden by ACPI.
[17179606.736000] Bluetooth: Core ver 2.8
[17179606.736000] NET: Registered protocol family 31
[17179606.736000] Bluetooth: HCI device and connection manager initialized
[17179606.736000] Bluetooth: HCI socket layer initialized
[17179606.756000] Bluetooth: L2CAP ver 2.8
[17179606.756000] Bluetooth: L2CAP socket layer initialized
[17179606.760000] Bluetooth: RFCOMM socket layer initialized
[17179606.760000] Bluetooth: RFCOMM TTY layer initialized
[17179606.760000] Bluetooth: RFCOMM ver 1.7
[17179648.216000] fuse init (API version 7.3)
root@ederoso-laptop:/home/ederoso#
Tommy
Avatar utente
totò
Gruppo Promozione
Gruppo Promozione
Messaggi: 4363
Iscrizione: giovedì 30 marzo 2006, 16:26
Desktop: Ubuntu Mate
Distribuzione: Ubuntu 18.04.1 LTS i686
Sesso: Maschile
Località: Scalea (CS)
Contatti:

Re: NTFS-3g

Messaggio da totò »

Ho unito questa discussione con quella iniziata qui.
Aprire piu post con lo stesso problema è considerato crossposting, che è vietato dal regolamento:
http://forum.ubuntu-it.org/index.php?ac ... db33da766e

ciao
Ultima modifica di Anonymous il giovedì 11 gennaio 2007, 13:40, modificato 1 volta in totale.
Salvatore
Vuoi gli stickers di ubuntu, clicca qui :)
Ubuntu-it non è potere, ma supporto.
Scrivi risposta

Ritorna a “Dilemmi del principiante”

Chi c’è in linea

Visualizzano questa sezione: 0 utenti iscritti e 4 ospiti