scheda ati

[Kasperyan]

sisi sto usando gli open, però avrei voluto usare catalyst (che usavo anche su W7) che è piu comodo

[cristian_c]

sisi sto usando gli open, però avrei voluto usare catalyst (che usavo anche su W7) che è piu comodo

Riposta:

Codice: Seleziona tutto

lspci -k

[Kasperyan]

Codice: Seleziona tutto

tommy@tommy:~$ lspci -k
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
	Subsystem: Hewlett-Packard Company Device 144a
	Kernel driver in use: agpgart-intel
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02)
	Kernel driver in use: pcieport
	Kernel modules: shpchp
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
	Subsystem: Hewlett-Packard Company Device 144a
	Kernel driver in use: i915
	Kernel modules: i915
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
	Subsystem: Hewlett-Packard Company Device 144a
	Kernel driver in use: mei
	Kernel modules: mei
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
	Subsystem: Hewlett-Packard Company Device 144a
	Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
	Subsystem: Hewlett-Packard Company Device 144a
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
	Kernel driver in use: pcieport
	Kernel modules: shpchp
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05)
	Kernel driver in use: pcieport
	Kernel modules: shpchp
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
	Subsystem: Hewlett-Packard Company Device 144a
	Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5)
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)
	Subsystem: Hewlett-Packard Company Device 144a
	Kernel modules: iTCO_wdt
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05)
	Subsystem: Hewlett-Packard Company Device 144a
	Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
	Subsystem: Hewlett-Packard Company Device 144a
	Kernel modules: i2c-i801
00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05)
	Subsystem: Hewlett-Packard Company Device 144a
	Kernel driver in use: intel ips
	Kernel modules: intel_ips
01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Manhattan [Mobility Radeon HD 5400 Series]
	Subsystem: Hewlett-Packard Company Device 144a
	Kernel driver in use: radeon
	Kernel modules: radeon
01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Cedar HDMI Audio [Radeon HD 5400/6300 Series]
	Subsystem: Hewlett-Packard Company Device 144a
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd-hda-intel
02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
	Subsystem: Hewlett-Packard Company U98Z062.12 802.11bgn Wireless Half-size Mini PCIe Card
	Kernel driver in use: ath9k
	Kernel modules: ath9k
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
	Subsystem: Hewlett-Packard Company Device 144a
	Kernel driver in use: r8169
	Kernel modules: r8169
7f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
	Subsystem: Hewlett-Packard Company Device 144a
7f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
	Subsystem: Hewlett-Packard Company Device 144a
7f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
	Subsystem: Hewlett-Packard Company Device 144a
7f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02)
	Subsystem: Hewlett-Packard Company Device 144a
7f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
	Subsystem: Hewlett-Packard Company Device 144a
7f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
	Subsystem: Hewlett-Packard Company Device 144a
tommy@tommy:~$ 

[cristian_c]

Se tu postassi il contenuto di /var/log/Xorg.0.log, potrebbe essere d'aiuto

[Kasperyan]

come faccio?

[dallas]

come faccio?

Codice: Seleziona tutto

 sudo gedit /var/log/Xorg.0.log 

e copi-incolli il contenuto, magari utilizzando la funzione spoiler del forum

[Kasperyan]

Spoiler

Mostra

[ 18.711]
X.Org X Server 1.11.3
Release Date: 2011-12-16
[ 18.711] X Protocol Version 11, Revision 0
[ 18.711] Build Operating System: Linux 2.6.42-34-generic x86_64 Ubuntu
[ 18.711] Current Operating System: Linux tommy 3.2.0-38-generic #61-Ubuntu SMP Tue Feb 19 12:18:21 UTC 2013 x86_64
[ 18.711] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-38-generic root=UUID=c487c044-f7e3-4b83-b206-bf63c09de6e1 ro quiet splash vt.handoff=7
[ 18.711] Build Date: 17 January 2013 06:14:10AM
[ 18.711] xorg-server 2:1.11.4-0ubuntu10.11 (For technical support please see http://www.ubuntu.com/support)
[ 18.711] Current version of pixman: 0.24.4
[ 18.711] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 18.711] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 18.711] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar 6 12:45:39 2013
[ 18.711] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 18.711] (==) No Layout section. Using the first Screen section.
[ 18.711] (==) No screen section available. Using defaults.
[ 18.711] (**) |-->Screen "Default Screen Section" (0)
[ 18.711] (**) | |-->Monitor "<default monitor>"
[ 18.712] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 18.712] (==) Automatically adding devices
[ 18.712] (==) Automatically enabling devices
[ 18.712] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 18.712] Entry deleted from font path.
[ 18.712] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 18.712] Entry deleted from font path.
[ 18.712] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 18.712] Entry deleted from font path.
[ 18.712] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 18.712] Entry deleted from font path.
[ 18.712] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 18.712] Entry deleted from font path.
[ 18.712] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 18.712] Entry deleted from font path.
[ 18.712] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 18.712] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 18.712] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 18.712] (II) Loader magic: 0x7f3460e04b00
[ 18.712] (II) Module ABI versions:
[ 18.712] X.Org ANSI C Emulation: 0.4
[ 18.712] X.Org Video Driver: 11.0
[ 18.712] X.Org XInput driver : 16.0
[ 18.712] X.Org Server Extension : 6.0
[ 18.712] (--) PCI:*(0:0:2:0) 8086103c:144a rev 2, Mem @ 0xc0000000/4194304, 0xb0000000/268435456, I/O @ 0x00005050/8
[ 18.713] (--) PCI: (0:1:0:0) 1002:68e0144a rev 0, Mem @ 0xa0000000/268435456, 0xc4400000/131072, I/O @ 0x00004000/256, BIOS @ 0x????????/131072
[ 18.713] (II) Open ACPI successful (/var/run/acpid.socket)
[ 18.713] (II) LoadModule: "extmod"
[ 18.747] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 18.747] (II) Module extmod: vendor="X.Org Foundation"
[ 18.747] compiled for 1.11.3, module version = 1.0.0
[ 18.747] Module class: X.Org Server Extension
[ 18.747] ABI class: X.Org Server Extension, version 6.0
[ 18.747] (II) Loading extension MIT-SCREEN-SAVER
[ 18.747] (II) Loading extension XFree86-VidModeExtension
[ 18.747] (II) Loading extension XFree86-DGA
[ 18.747] (II) Loading extension DPMS
[ 18.747] (II) Loading extension XVideo
[ 18.747] (II) Loading extension XVideo-MotionCompensation
[ 18.747] (II) Loading extension X-Resource
[ 18.747] (II) LoadModule: "dbe"
[ 18.747] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 18.747] (II) Module dbe: vendor="X.Org Foundation"
[ 18.747] compiled for 1.11.3, module version = 1.0.0
[ 18.747] Module class: X.Org Server Extension
[ 18.747] ABI class: X.Org Server Extension, version 6.0
[ 18.747] (II) Loading extension DOUBLE-BUFFER
[ 18.747] (II) LoadModule: "glx"
[ 18.748] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 18.748] (II) Module glx: vendor="X.Org Foundation"
[ 18.748] compiled for 1.11.3, module version = 1.0.0
[ 18.748] ABI class: X.Org Server Extension, version 6.0
[ 18.748] (==) AIGLX enabled
[ 18.748] (II) Loading extension GLX
[ 18.748] (II) LoadModule: "record"
[ 18.748] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 18.748] (II) Module record: vendor="X.Org Foundation"
[ 18.748] compiled for 1.11.3, module version = 1.13.0
[ 18.748] Module class: X.Org Server Extension
[ 18.748] ABI class: X.Org Server Extension, version 6.0
[ 18.748] (II) Loading extension RECORD
[ 18.748] (II) LoadModule: "dri"
[ 18.748] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 18.748] (II) Module dri: vendor="X.Org Foundation"
[ 18.748] compiled for 1.11.3, module version = 1.0.0
[ 18.748] ABI class: X.Org Server Extension, version 6.0
[ 18.748] (II) Loading extension XFree86-DRI
[ 18.748] (II) LoadModule: "dri2"
[ 18.749] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 18.749] (II) Module dri2: vendor="X.Org Foundation"
[ 18.749] compiled for 1.11.3, module version = 1.2.0
[ 18.749] ABI class: X.Org Server Extension, version 6.0
[ 18.749] (II) Loading extension DRI2
[ 18.749] (==) Matched intel as autoconfigured driver 0
[ 18.749] (==) Matched vesa as autoconfigured driver 1
[ 18.749] (==) Matched fbdev as autoconfigured driver 2
[ 18.749] (==) Assigned the driver to the xf86ConfigLayout
[ 18.749] (II) LoadModule: "intel"
[ 18.749] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 18.749] (II) Module intel: vendor="X.Org Foundation"
[ 18.749] compiled for 1.11.3, module version = 2.17.0
[ 18.749] Module class: X.Org Video Driver
[ 18.749] ABI class: X.Org Video Driver, version 11.0
[ 18.749] (II) LoadModule: "vesa"
[ 18.749] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 18.749] (II) Module vesa: vendor="X.Org Foundation"
[ 18.749] compiled for 1.11.3, module version = 2.3.0
[ 18.749] Module class: X.Org Video Driver
[ 18.749] ABI class: X.Org Video Driver, version 11.0
[ 18.749] (II) LoadModule: "fbdev"
[ 18.749] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 18.749] (II) Module fbdev: vendor="X.Org Foundation"
[ 18.749] compiled for 1.11.3, module version = 0.4.2
[ 18.749] ABI class: X.Org Video Driver, version 11.0
[ 18.749] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2)
[ 18.750] (II) VESA: driver for VESA chipsets: vesa
[ 18.750] (II) FBDEV: driver for framebuffer: fbdev
[ 18.750] (++) using VT number 7

[ 18.751] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 18.751] (WW) Falling back to old probe method for vesa
[ 18.751] (WW) Falling back to old probe method for fbdev
[ 18.751] (II) Loading sub module "fbdevhw"
[ 18.751] (II) LoadModule: "fbdevhw"
[ 18.751] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 18.751] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 18.751] compiled for 1.11.3, module version = 0.0.2
[ 18.751] ABI class: X.Org Video Driver, version 11.0
[ 18.751] drmOpenDevice: node name is /dev/dri/card0
[ 18.751] drmOpenDevice: open result is 9, (OK)
[ 18.751] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 18.751] drmOpenDevice: node name is /dev/dri/card0
[ 18.751] drmOpenDevice: open result is 9, (OK)
[ 18.751] drmOpenByBusid: drmOpenMinor returns 9
[ 18.751] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 18.751] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 18.751] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 18.751] (==) intel(0): RGB weight 888
[ 18.752] (==) intel(0): Default visual is TrueColor
[ 18.752] (II) intel(0): Integrated Graphics Chipset: Intel(R) Arrandale
[ 18.752] (--) intel(0): Chipset: "Arrandale"
[ 18.752] (**) intel(0): Relaxed fencing enabled
[ 18.752] (**) intel(0): Wait on SwapBuffers? enabled
[ 18.752] (**) intel(0): Triple buffering? enabled
[ 18.752] (**) intel(0): Framebuffer tiled
[ 18.752] (**) intel(0): Pixmaps tiled
[ 18.752] (**) intel(0): 3D buffers tiled
[ 18.752] (**) intel(0): SwapBuffers wait enabled
[ 18.752] (==) intel(0): video overlay key set to 0x101fe
[ 18.752] (II) intel(0): Output LVDS1 has no monitor section
[ 18.752] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video1
[ 18.752] (II) intel(0): Output VGA1 has no monitor section
[ 18.752] (II) intel(0): EDID for output LVDS1
[ 18.752] (II) intel(0): Manufacturer: SEC Model: 3651 Serial#: 0
[ 18.752] (II) intel(0): Year: 2008 Week: 0
[ 18.752] (II) intel(0): EDID Version: 1.3
[ 18.752] (II) intel(0): Digital Display Input
[ 18.752] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 18.752] (II) intel(0): Gamma: 2.20
[ 18.752] (II) intel(0): No DPMS capabilities specified
[ 18.752] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 18.752] (II) intel(0): First detailed timing is preferred mode
[ 18.752] (II) intel(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
[ 18.752] (II) intel(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
[ 18.752] (II) intel(0): Manufacturer's mask: 0
[ 18.752] (II) intel(0): Supported detailed timing:
[ 18.752] (II) intel(0): clock: 69.3 MHz Image Size: 344 x 194 mm
[ 18.752] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1480 h_border: 0
[ 18.752] (II) intel(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 780 v_border: 0
[ 18.752] (II) intel(0): Unknown vendor-specific block f
[ 18.752] (II) intel(0): SAMSUNG
[ 18.752] (II) intel(0): 156AT05-H01
[ 18.752] (II) intel(0): EDID (in hex):
[ 18.752] (II) intel(0): 00ffffffffffff004ca3513600000000
[ 18.752] (II) intel(0): 00120103802213780a87f594574f8c27
[ 18.752] (II) intel(0): 27505400000001010101010101010101
[ 18.752] (II) intel(0): 010101010101121b567250000c303020
[ 18.752] (II) intel(0): 250058c2100000190000000f00000000
[ 18.752] (II) intel(0): 00000000001eb4027400000000fe0053
[ 18.753] (II) intel(0): 414d53554e470a2020202020000000fe
[ 18.753] (II) intel(0): 00313536415430352d4830310a200015
[ 18.753] (II) intel(0): EDID vendor "SEC", prod id 13905
[ 18.753] (II) intel(0): Printing DDC gathered Modelines:
[ 18.753] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 18.753] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 18.753] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 18.753] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 18.753] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 18.753] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 18.753] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 18.753] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 18.753] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 18.753] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 18.753] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 18.753] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[ 18.753] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 18.753] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 18.753] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 18.753] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[ 18.753] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[ 18.753] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 18.753] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 18.753] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[ 18.753] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[ 18.753] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 18.753] (II) intel(0): Printing probed modes for output LVDS1
[ 18.753] (II) intel(0): Modeline "1366x768"x60.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 18.753] (II) intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 18.753] (II) intel(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz)
[ 18.753] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 18.753] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 18.753] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 18.753] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 18.753] (II) intel(0): EDID for output VGA1
[ 18.753] (II) intel(0): Output LVDS1 connected
[ 18.753] (II) intel(0): Output VGA1 disconnected
[ 18.753] (II) intel(0): Using exact sizes for initial modes
[ 18.753] (II) intel(0): Output LVDS1 using initial mode 1366x768
[ 18.753] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 18.753] (II) intel(0): Kernel page flipping support detected, enabling
[ 18.753] (**) intel(0): Display dimensions: (340, 190) mm
[ 18.753] (**) intel(0): DPI set to (102, 102)
[ 18.753] (II) Loading sub module "fb"
[ 18.753] (II) LoadModule: "fb"
[ 18.753] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 18.753] (II) Module fb: vendor="X.Org Foundation"
[ 18.753] compiled for 1.11.3, module version = 1.0.0
[ 18.753] ABI class: X.Org ANSI C Emulation, version 0.4
[ 18.753] (II) Loading sub module "dri2"
[ 18.753] (II) LoadModule: "dri2"
[ 18.754] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 18.754] (II) Module dri2: vendor="X.Org Foundation"
[ 18.754] compiled for 1.11.3, module version = 1.2.0
[ 18.754] ABI class: X.Org Server Extension, version 6.0
[ 18.754] (II) UnloadModule: "vesa"
[ 18.754] (II) Unloading vesa
[ 18.754] (II) UnloadModule: "fbdev"
[ 18.754] (II) Unloading fbdev
[ 18.754] (II) UnloadModule: "fbdevhw"
[ 18.754] (II) Unloading fbdevhw
[ 18.754] (==) Depth 24 pixmap format is 32 bpp
[ 18.754] (II) intel(0): [DRI2] Setup complete
[ 18.754] (II) intel(0): [DRI2] DRI driver: i965
[ 18.754] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[ 18.762] (II) UXA(0): Driver registered support for the following operations:
[ 18.762] (II) solid
[ 18.762] (II) copy
[ 18.762] (II) composite (RENDER acceleration)
[ 18.762] (II) put_image
[ 18.762] (II) get_image
[ 18.762] (==) intel(0): Backing store disabled
[ 18.762] (==) intel(0): Silken mouse enabled
[ 18.762] (II) intel(0): Initializing HW Cursor
[ 18.824] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 18.824] (==) intel(0): DPMS enabled
[ 18.824] (==) intel(0): Intel XvMC decoder enabled
[ 18.824] (II) intel(0): Set up textured video
[ 18.824] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 18.824] (II) intel(0): direct rendering: DRI2 Enabled
[ 18.824] (==) intel(0): hotplug detection: "enabled"
[ 18.824] (--) RandR disabled
[ 18.824] (II) Initializing built-in extension Generic Event Extension
[ 18.824] (II) Initializing built-in extension SHAPE
[ 18.824] (II) Initializing built-in extension MIT-SHM
[ 18.824] (II) Initializing built-in extension XInputExtension
[ 18.824] (II) Initializing built-in extension XTEST
[ 18.824] (II) Initializing built-in extension BIG-REQUESTS
[ 18.824] (II) Initializing built-in extension SYNC
[ 18.824] (II) Initializing built-in extension XKEYBOARD
[ 18.824] (II) Initializing built-in extension XC-MISC
[ 18.824] (II) Initializing built-in extension SECURITY
[ 18.824] (II) Initializing built-in extension XINERAMA
[ 18.824] (II) Initializing built-in extension XFIXES
[ 18.824] (II) Initializing built-in extension RENDER
[ 18.824] (II) Initializing built-in extension RANDR
[ 18.824] (II) Initializing built-in extension COMPOSITE
[ 18.824] (II) Initializing built-in extension DAMAGE
[ 18.832] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 18.832] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 18.832] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 18.832] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 18.832] (II) AIGLX: Loaded and initialized i965
[ 18.832] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 18.832] (II) intel(0): Setting screen physical size to 361 x 203
[ 18.838] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 18.840] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 18.840] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 18.840] (II) LoadModule: "evdev"
[ 18.840] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.841] (II) Module evdev: vendor="X.Org Foundation"
[ 18.841] compiled for 1.11.3, module version = 2.7.0
[ 18.841] Module class: X.Org XInput Driver
[ 18.841] ABI class: X.Org XInput driver, version 16.0
[ 18.841] (II) Using input driver 'evdev' for 'Power Button'
[ 18.841] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.841] (**) Power Button: always reports core events
[ 18.841] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 18.841] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 18.841] (--) evdev: Power Button: Found keys
[ 18.841] (II) evdev: Power Button: Configuring as keyboard
[ 18.841] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 18.841] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 18.841] (**) Option "xkb_rules" "evdev"
[ 18.841] (**) Option "xkb_model" "pc105"
[ 18.841] (**) Option "xkb_layout" "it"
[ 18.842] (II) XKB: reuse xkmfile /var/lib/xkb/server-3781FECB9CB8D26EE03343DB2C93394EA704B98F.xkm
[ 18.843] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 18.843] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 18.843] (II) Using input driver 'evdev' for 'Video Bus'
[ 18.843] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.843] (**) Video Bus: always reports core events
[ 18.843] (**) evdev: Video Bus: Device: "/dev/input/event7"
[ 18.843] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 18.843] (--) evdev: Video Bus: Found keys
[ 18.843] (II) evdev: Video Bus: Configuring as keyboard
[ 18.843] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7/event7"
[ 18.843] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 18.843] (**) Option "xkb_rules" "evdev"
[ 18.843] (**) Option "xkb_model" "pc105"
[ 18.843] (**) Option "xkb_layout" "it"
[ 18.843] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[ 18.843] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 18.843] (II) Using input driver 'evdev' for 'Video Bus'
[ 18.843] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.843] (**) Video Bus: always reports core events
[ 18.843] (**) evdev: Video Bus: Device: "/dev/input/event8"
[ 18.843] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 18.843] (--) evdev: Video Bus: Found keys
[ 18.843] (II) evdev: Video Bus: Configuring as keyboard
[ 18.843] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:10/LNXVIDEO:02/input/input8/event8"
[ 18.843] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id
[ 18.843] (**) Option "xkb_rules" "evdev"
[ 18.843] (**) Option "xkb_model" "pc105"
[ 18.843] (**) Option "xkb_layout" "it"
[ 18.844] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 18.844] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 18.844] (II) Using input driver 'evdev' for 'Power Button'
[ 18.844] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.844] (**) Power Button: always reports core events
[ 18.844] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 18.844] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 18.844] (--) evdev: Power Button: Found keys
[ 18.844] (II) evdev: Power Button: Configuring as keyboard
[ 18.844] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 18.844] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 18.844] (**) Option "xkb_rules" "evdev"
[ 18.844] (**) Option "xkb_model" "pc105"
[ 18.844] (**) Option "xkb_layout" "it"
[ 18.845] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 18.845] (II) No input driver specified, ignoring this device.
[ 18.845] (II) This device may have been added with another device file.
[ 18.845] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event12)
[ 18.845] (II) No input driver specified, ignoring this device.
[ 18.845] (II) This device may have been added with another device file.
[ 18.845] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event10)
[ 18.845] (II) No input driver specified, ignoring this device.
[ 18.845] (II) This device may have been added with another device file.
[ 18.845] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event9)
[ 18.845] (II) No input driver specified, ignoring this device.
[ 18.845] (II) This device may have been added with another device file.
[ 18.846] (II) config/udev: Adding input device HP Webcam (/dev/input/event4)
[ 18.846] (**) HP Webcam: Applying InputClass "evdev keyboard catchall"
[ 18.846] (II) Using input driver 'evdev' for 'HP Webcam'
[ 18.846] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.846] (**) HP Webcam: always reports core events
[ 18.846] (**) evdev: HP Webcam: Device: "/dev/input/event4"
[ 18.846] (--) evdev: HP Webcam: Vendor 0x408 Product 0x3b2
[ 18.846] (--) evdev: HP Webcam: Found keys
[ 18.846] (II) evdev: HP Webcam: Configuring as keyboard
[ 18.846] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input4/event4"
[ 18.846] (II) XINPUT: Adding extended input device "HP Webcam" (type: KEYBOARD, id 10)
[ 18.846] (**) Option "xkb_rules" "evdev"
[ 18.846] (**) Option "xkb_model" "pc105"
[ 18.846] (**) Option "xkb_layout" "it"
[ 18.846] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 18.846] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 18.846] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 18.846] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.846] (**) AT Translated Set 2 keyboard: always reports core events
[ 18.846] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[ 18.846] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 18.846] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 18.846] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 18.846] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 18.846] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 18.846] (**) Option "xkb_rules" "evdev"
[ 18.846] (**) Option "xkb_model" "pc105"
[ 18.846] (**) Option "xkb_layout" "it"
[ 18.847] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event11)
[ 18.847] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 18.847] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 18.847] (II) LoadModule: "synaptics"
[ 18.847] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 18.847] (II) Module synaptics: vendor="X.Org Foundation"
[ 18.847] compiled for 1.11.3, module version = 1.6.2
[ 18.848] Module class: X.Org XInput Driver
[ 18.848] ABI class: X.Org XInput driver, version 16.0
[ 18.848] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 18.848] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 18.848] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 18.848] (**) Option "Device" "/dev/input/event11"
[ 18.924] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 18.924] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[ 18.924] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5672
[ 18.924] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4550
[ 18.924] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 18.924] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 18.924] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[ 18.924] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 18.924] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 18.924] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 18.928] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event11"
[ 18.928] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[ 18.928] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 18.928] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 18.928] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.038
[ 18.928] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 18.928] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 18.928] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 18.928] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 18.928] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 18.928] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 18.928] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 18.929] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event5)
[ 18.929] (II) No input driver specified, ignoring this device.
[ 18.929] (II) This device may have been added with another device file.
[ 18.929] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[ 18.929] (II) No input driver specified, ignoring this device.
[ 18.929] (II) This device may have been added with another device file.
[ 18.930] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event6)
[ 18.930] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 18.930] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[ 18.930] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.930] (**) HP WMI hotkeys: always reports core events
[ 18.930] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event6"
[ 18.930] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[ 18.930] (--) evdev: HP WMI hotkeys: Found keys
[ 18.930] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[ 18.930] (**) Option "config_info" "udev:/sys/devices/virtual/input/input6/event6"
[ 18.930] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 13)
[ 18.930] (**) Option "xkb_rules" "evdev"
[ 18.930] (**) Option "xkb_model" "pc105"
[ 18.930] (**) Option "xkb_layout" "it"
[ 19.685] (II) intel(0): EDID vendor "SEC", prod id 13905
[ 19.685] (II) intel(0): Printing DDC gathered Modelines:
[ 19.685] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 20.073] (II) intel(0): EDID vendor "SEC", prod id 13905
[ 20.073] (II) intel(0): Printing DDC gathered Modelines:
[ 20.073] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 20.320] (II) intel(0): EDID vendor "SEC", prod id 13905
[ 20.320] (II) intel(0): Printing DDC gathered Modelines:
[ 20.320] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 25.012] (II) intel(0): EDID vendor "SEC", prod id 13905
[ 25.012] (II) intel(0): Printing DDC gathered Modelines:
[ 25.012] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 168.250] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse1)
[ 168.250] (II) No input driver specified, ignoring this device.
[ 168.250] (II) This device may have been added with another device file.
[ 168.250] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event13)
[ 168.250] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 168.250] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[ 168.250] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 168.250] (**) Logitech USB Optical Mouse: always reports core events
[ 168.250] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event13"
[ 168.250] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc06c
[ 168.250] (--) evdev: Logitech USB Optical Mouse: Found 3 mouse buttons
[ 168.251] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[ 168.251] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[ 168.251] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[ 168.251] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[ 168.251] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[ 168.251] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 168.251] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 168.251] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input13/event13"
[ 168.251] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 14)
[ 168.251] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[ 168.251] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 168.251] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[ 168.251] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 168.251] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4

[cristian_c]

Puoi postare anche una schermata del bios?

P.S. Perché utilizzi i tag 'spoiler'?

Edit:

e copi-incolli il contenuto, magari utilizzando la funzione spoiler del forum

[dallas]

Perché utilizzi i tag 'spoiler'?

Edit:

e copi-incolli il contenuto, magari utilizzando la funzione spoiler del forum

per rendere più leggibile il thread e non occupare un intera schermata per un log...

[Kasperyan]

che immagine ti serve del bios?

[cristian_c]

Perché utilizzi i tag 'spoiler'?

Edit:

e copi-incolli il contenuto, magari utilizzando la funzione spoiler del forum

per rendere più leggibile il thread e non occupare un intera schermata per un log...

E non vanno bene i tag 'code' in questo caso (anche perché i tag 'spoiler' occupano comunque tutto lo spazio, aperti, non avendo la scrollbar di navigazione)?

che immagine ti serve del bios?

Magari una con opzioni relative alla scheda video

[Kasperyan]

ho cercato nel bios, non trovo nulla riguardo alle schede video

[cristian_c]

ho cercato nel bios, non trovo nulla riguardo alle schede video

Di quale bios si tratta?

[Kasperyan]

bios hp... intendi questo?

[cristian_c]

bios hp... intendi questo?

Mmm, apri un terminale e digita:

Codice: Seleziona tutto

sudo dmidecode --type bios

[Kasperyan]

Codice: Seleziona tutto

tommy@tommy:~$ sudo dmidecode --type bios
[sudo] password for tommy: 
# dmidecode 2.11
SMBIOS 2.6 present.

Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
	Vendor: Hewlett-Packard
	Version: F.12
	Release Date: 08/05/2010
	ROM Size: 1536 kB
	Characteristics:
		PCI is supported
		BIOS is upgradeable
		BIOS shadowing is allowed
		Boot from CD is supported
		Selectable boot is supported
		EDD is supported
		Japanese floppy for NEC 9800 1.2 MB is supported (int 13h)
		Japanese floppy for Toshiba 1.2 MB is supported (int 13h)
		5.25"/360 kB floppy services are supported (int 13h)
		5.25"/1.2 MB floppy services are supported (int 13h)
		3.5"/720 kB floppy services are supported (int 13h)
		3.5"/2.88 MB floppy services are supported (int 13h)
		8042 keyboard services are supported (int 9h)
		CGA/mono video services are supported (int 10h)
		ACPI is supported
		USB legacy is supported
		BIOS boot specification is supported
		Targeted content distribution is supported
	BIOS Revision: 15.18
	Firmware Revision: 101.39

tommy@tommy:~$ 

[cristian_c]

Codice: Seleziona tutto

tommy@tommy:~$ sudo dmidecode --type bios
[sudo] password for tommy: 
# dmidecode 2.11
SMBIOS 2.6 present.

Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
	Vendor: Hewlett-Packard
	Version: F.12
	Release Date: 08/05/2010
	ROM Size: 1536 kB
	Characteristics:
		PCI is supported
		BIOS is upgradeable
		BIOS shadowing is allowed
		Boot from CD is supported
		Selectable boot is supported
		EDD is supported
		Japanese floppy for NEC 9800 1.2 MB is supported (int 13h)
		Japanese floppy for Toshiba 1.2 MB is supported (int 13h)
		5.25"/360 kB floppy services are supported (int 13h)
		5.25"/1.2 MB floppy services are supported (int 13h)
		3.5"/720 kB floppy services are supported (int 13h)
		3.5"/2.88 MB floppy services are supported (int 13h)
		8042 keyboard services are supported (int 9h)
		CGA/mono video services are supported (int 10h)
		ACPI is supported
		USB legacy is supported
		BIOS boot specification is supported
		Targeted content distribution is supported
	BIOS Revision: 15.18
	Firmware Revision: 101.39

tommy@tommy:~$ 

Posta comunque le immagini

[cristian_c]

@dallas,
dalla posta elettronica ho visto che mi hai inviato un messaggio privato, ma non ne conosco il contenuto

[dallas]

@dallas,
dalla posta elettronica ho visto che mi hai inviato un messaggio privato, ma non ne conosco il contenuto

Chiedevo scusa per aver suggerito l'uso del tag spoiler, i tag code in effetti vanno più che bene! Avevo suggerito l'utilizzo dello spoiler perché da smartphone i tag code non hanno le scroll bar ed effettivamente c'erano pagnie occupate solo dai log
Ti avevo scritto in mp per non rischiare di andare eccessivamente in off-topic

[cristian_c]

@dallas,
dalla posta elettronica ho visto che mi hai inviato un messaggio privato, ma non ne conosco il contenuto

Chiedevo scusa per aver suggerito l'uso del tag spoiler, i tag code in effetti vanno più che bene! Avevo suggerito l'utilizzo dello spoiler perché da smartphone i tag code non hanno le scroll bar ed effettivamente c'erano pagnie occupate solo dai log
Ti avevo scritto in mp per non rischiare di andare eccessivamente in off-topic

Ok, scusa, ma è una cosa che riscontri soltanto con questo forum? In caso affermativo, potresti farlo presente in Gruppo forum