[Risolto] Feisty e ndiswrapper

[zeldoso]

ho provato ad installare ndiswrapper su feisty seguendo la stessa procedura utilizzata per edgy.
ho aggiunto il cd di installazione da synaptic e poi ho installato ndiswrapper-utils.
l'installazione di ndiswrapper e i realtivi driver funziona, ma poi non appare niente di nuovo digitando iwconfig. (cosa che invece è accaduta su edgy).

potrebbe essere un problema di incompatibilità o è solo la mia incapacità?

[oracle]

Il che vorrebbe dire che la tua scheda wireless non viene vista?

Che dice ifconfig -a?

[zeldoso]

ecco un po' di cose che magari ti possono aiutare

Codice: Seleziona tutto

valerio@lxcasa:~$ ifconfig -a
eth0      Link encap:Ethernet  HWaddr 00:17:31:87:46:E7  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
          Interrupt:17 Base address:0xe000 

eth0:avah Link encap:Ethernet  HWaddr 00:17:31:87:46:E7  
          inet addr:169.254.7.170  Bcast:169.254.255.255  Mask:255.255.0.0
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          Interrupt:17 Base address:0xe000 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:108 errors:0 dropped:0 overruns:0 frame:0
          TX packets:108 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:8088 (7.8 KiB)  TX bytes:8088 (7.8 KiB)

valerio@lxcasa:~$ iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

valerio@lxcasa:~$ ndiswrapper -l
Installed drivers:
bcmwl5          driver installed, hardware present 
valerio@lxcasa:~$ lspci
00:00.0 Host bridge: Intel Corporation 82P965/G965 Memory Controller Hub (rev 02)
00:01.0 PCI bridge: Intel Corporation 82P965/G965 PCI Express Root Port (rev 02)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #5 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 02)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev f2)
00:1f.0 ISA bridge: Intel Corporation 82801HB/HR (ICH8/R) LPC Interface Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801H (ICH8 Family) 4 port SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)
00:1f.5 IDE interface: Intel Corporation 82801H (ICH8 Family) 2 port SATA IDE Controller (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc R430 [Radeon X800 (PCIE)]
01:00.1 Display controller: ATI Technologies Inc R430 [Radeon X800 (PCIE) Secondary]
02:00.0 IDE interface: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 02)
02:00.1 IDE interface: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 02)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
05:02.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
valerio@lxcasa:~$ 

[zeldoso]

risolto installando la versione più recente di ndiswrapper.

nonostante avessi provato a compilarlo precedentemente sembra che solo al 1.37 funzioni.
se qualcuno ha lo stesso problema vale la pena di provare