In pratica accade questo: (è un problema vecchio e ci ho convissuto fino ad ora sperando in bugfix vari ma nulla: ho deciso di agire... quindi aiuto!)
1. Avvio ubuntu da usb bootable, inserisco la chiavetta internet, viene letta perfettamente, la configuro, mi connetto a internet, decido di installare ubuntu 16.04.1
2. Spengo e riaccendo il pc, inserisco la chiavetta e... NON VIENE PIù VISTA dal network manager.
3. Spulcio un po' su internet dall'altro pc e trovo un workaround: lanciare da terminale questo comando
Codice: Seleziona tutto
sudo usb_modeswitch -W -v 19d2 -p 2000 -K4. dopo un minuto dal comando la chiavetta viene magicamente riconosciuta come tale e posso connettermi senza problemi. Se mi disconnetto posso riconnettermi. se stacco la chiavetta e poi la reinserisco posso riconnettermi. Se spengo il pc devo rilanciare la stringa da terminale per connettermi.
AIUTO! ci deve essere per forza un modo per farla funzionare senza lanciare sempre il comando da terminale, perché per funzionare funziona, ma non si attiva da sola
Qui i comandi che ho dato da terminale con chiavetta collegata ma non letta:
-lsusb (e la chiavetta non mi faceva connettere)
poi
-sudo usb_modeswitch -W -v 19d2 -p 2000 -K (e ancora non mi connette)
poi
-lsusb (e dopo un poco di tempo mi viene disponibile la connessione a banda larga mobile)
Codice: Seleziona tutto
emanuele@emanuele-Lenovo-G50-70:~$ lsusb
Bus 001 Device 002: ID 8087:8000 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 005: ID 0bda:b728 Realtek Semiconductor Corp.
Bus 002 Device 004: ID 5986:0652 Acer, Inc
Bus 002 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 002 Device 002: ID 19d2:2000 ZTE WCDMA Technologies MSM MF627/MF628/MF628+/MF636+ HSDPA/HSUPA
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
emanuele@emanuele-Lenovo-G50-70:~$ sudo usb_modeswitch -W -v 19d2 -p 2000 -K
[sudo] password di emanuele:
Take all parameters from the command line
* usb_modeswitch: handle USB devices with multiple modes
* Version 2.2.5 (C) Josua Dietze 2015
* Based on libusb1/libusbx
! PLEASE REPORT NEW CONFIGURATIONS !
DefaultVendor= 0x19d2
DefaultProduct= 0x2000
StandardEject=1
NeedResponse=0
Look for default devices ...
found USB ID 8087:8000
found USB ID 1d6b:0002
found USB ID 1d6b:0003
found USB ID 0bda:b728
found USB ID 5986:0652
found USB ID 0bda:0129
found USB ID 19d2:2000
vendor ID matched
product ID matched
found USB ID 1d6b:0002
Found devices in default mode (1)
Access device 002 on bus 002
Current configuration number is 1
Use interface number 0
Use endpoints 0x01 (out) and 0x81 (in)
USB description data (for identification)
-------------------------
Manufacturer: ONDA,Incorporated
Product: ONDA WCDMA Technologies MSM
Serial No.: 1234567890ABCDEF
-------------------------
Sending standard EJECT sequence
Looking for active driver ...
No active driver found. Detached before or never attached
Set up interface 0
Use endpoint 0x01 for message sending ...
Trying to send message 1 to endpoint 0x01 ...
OK, message successfully sent
Read the response to message 1 (CSW) ...
Response successfully read (13 bytes).
Trying to send message 2 to endpoint 0x01 ...
OK, message successfully sent
Read the response to message 2 (CSW) ...
Response successfully read (13 bytes).
Reset response endpoint 0x81
Reset message endpoint 0x01
-> Run lsusb to note any changes. Bye!
emanuele@emanuele-Lenovo-G50-70:~$ lsusb
Bus 001 Device 002: ID 8087:8000 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 005: ID 0bda:b728 Realtek Semiconductor Corp.
Bus 002 Device 004: ID 5986:0652 Acer, Inc
Bus 002 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 002 Device 006: ID 19d2:0037 ZTE WCDMA Technologies MSM
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
emanuele@emanuele-Lenovo-G50-70:~$ 