stato di salute HD

Riconoscimento, installazione e configurazione delle periferiche.
axr
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1909
Iscrizione: sabato 1 aprile 2006, 16:10
Distribuzione: kubuntu 22.04

stato di salute HD

Messaggio da axr »

salve ho un Seagate Barracuda 7200.10 modello ST3250310AS,
gsmartcontroll mi da un warning su Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 33
vi allego il file di output, potreste gentilmente darmi un consiglio se è il caso di cambiarlo o no?
crystaldiskinfo per windows mi dice che è a rischio...
in tal caso che ne pensate del toshiba p300 da 1TB?
ho letto che sono molto affidabili, ero orientato per i wd ma ho letto che non sono più validi come prima, inoltre ne presi uno da 2,5" per il notobook di mia moglie ed è molto rumoroso!
grazie a tutti

Codice: Seleziona tutto

smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.3.0-040300-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.10
Device Model:     ST3250310AS
Serial Number:    6RY6YTKE
Firmware Version: 3.AHB
User Capacity:    250,059,350,016 bytes [250 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA/ATAPI-7 (minor revision not indicated)
Local Time is:    Tue Sep 26 15:15:48 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(  433) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  56) minutes.
SCT capabilities: 	       (0x0035)	SCT Status supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   100   253   006    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0002   097   097   000    Old_age   Always       -       0
  4 Start_Stop_Count        0x0032   090   090   020    Old_age   Always       -       10974
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       33
  7 Seek_Error_Rate         0x000f   087   060   030    Pre-fail  Always       -       473882427
  9 Power_On_Hours          0x0032   079   079   000    Old_age   Always       -       19079
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0033   090   090   020    Pre-fail  Always       -       10974
184 End-to-End_Error        0x0033   100   253   097    Pre-fail  Always       -       0
187 Reported_Uncorrect      0x003a   100   100   000    Old_age   Always       -       0
189 High_Fly_Writes         0x0022   100   100   045    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   062   054   000    Old_age   Always       -       38 (Min/Max 34/38)
194 Temperature_Celsius     0x001a   038   046   000    Old_age   Always       -       38 (0 4 0 0 0)
195 Hardware_ECC_Recovered  0x0012   066   061   000    Old_age   Always       -       138030261
197 Current_Pending_Sector  0x0010   100   100   000    Old_age   Offline      -       0
198 Offline_Uncorrectable   0x003e   100   100   000    Old_age   Always       -       0
199 UDMA_CRC_Error_Count    0x0000   200   200   000    Old_age   Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     18996         -
# 2  Short offline       Completed without error       00%     18264         -
# 3  Short offline       Completed without error       00%     17986         -
# 4  Short offline       Completed without error       00%     17314         -
# 5  Short offline       Completed without error       00%     17313         -
# 6  Short offline       Completed without error       00%     15443         -
# 7  Short offline       Completed without error       00%     15437         -
# 8  Short offline       Completed without error       00%     15357         -
# 9  Extended offline    Aborted by host               80%         0         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Avatar utente
Mdfalcubo
Moderatore Globale
Moderatore Globale
Messaggi: 20420
Iscrizione: venerdì 26 dicembre 2008, 11:17
Desktop: Solo XFCE
Distribuzione: Xubuntu 64 bit
Sesso: Maschile

Re: stato di salute HD

Messaggio da Mdfalcubo »

Se due sw diversi, da due sistemi diversi, ti avvisano di possibili problemi, direi che è il caso di correre ai ripari, a prescindere dai dettagli del log.
"Il genere umano è stimolante, è la gente che non sopporto,, (Linus - Peanuts)
axr
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1909
Iscrizione: sabato 1 aprile 2006, 16:10
Distribuzione: kubuntu 22.04

Re: stato di salute HD

Messaggio da axr »

Ti ringrazio:-) che ne pensi del Toshiba p300 come sostituto?
Scrivi risposta

Ritorna a “Driver e periferiche”

Chi c’è in linea

Visualizzano questa sezione: Majestic-12 [Bot] e 6 ospiti