come da topic, ho installato Kubuntu Edgy AMD64 su un Acer E380 :
Athlon X2 3800+
1gb RAM
HD 320Gb
VGA GeForce 7950GT 512Mb (ho cambiato quella in dotazione standard, una Radeon X1550)
Visto così sembra ok, ma non mi trova eth0; anche configurando a mano /etc/network/interfaces se faccio un ifup eth0 mi da' errori di "No such device" (ho bisogno di collegarmi alla LAN locale
Dando un lspci ho notato che tutti i devices riportano le giuste indicazioni ma sono tutti contrassegnati come "Unknown Device" (es. Ethernet controller: Marvell Technology Group Ltd. Unknown device 4364 (rev 12))
Cosa posso tentare?
Un po' di info
uname -a
Codice: Seleziona tutto
Linux syhome 2.6.17-10-generic #2 SMP Fri Oct 13 15:34:39 UTC 2006 x86_64 GNU/Linux
Codice: Seleziona tutto
00:00.0 RAM memory: nVidia Corporation Unknown device 03ea (rev a1)
00:01.0 ISA bridge: nVidia Corporation Unknown device 03e0 (rev a2)
00:01.1 SMBus: nVidia Corporation Unknown device 03eb (rev a2)
00:01.2 RAM memory: nVidia Corporation Unknown device 03f5 (rev a2)
00:02.0 USB Controller: nVidia Corporation Unknown device 03f1 (rev a2)
00:02.1 USB Controller: nVidia Corporation Unknown device 03f2 (rev a2)
00:04.0 PCI bridge: nVidia Corporation Unknown device 03f3 (rev a1)
00:05.0 Audio device: nVidia Corporation Unknown device 03f0 (rev a2)
00:06.0 IDE interface: nVidia Corporation Unknown device 03ec (rev a2)
00:08.0 IDE interface: nVidia Corporation Unknown device 03f6 (rev a2)
00:08.1 IDE interface: nVidia Corporation Unknown device 03f6 (rev a2)
00:09.0 PCI bridge: nVidia Corporation Unknown device 03e8 (rev a2)
00:0b.0 PCI bridge: nVidia Corporation Unknown device 03e9 (rev a2)
00:0c.0 PCI bridge: nVidia Corporation Unknown device 03e9 (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:09.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)
02:00.0 VGA compatible controller: nVidia Corporation Unknown device 0295 (rev a1)
03:00.0 Ethernet controller: Marvell Technology Group Ltd. Unknown device 4364 (rev 12)
Codice: Seleziona tutto
Module Size Used by
vfat 17920 1
fat 65456 1 vfat
nls_cp437 8704 2
isofs 43236 1
udf 97288 0
rfcomm 51360 0
l2cap 31744 5 rfcomm
bluetooth 64644 4 rfcomm,l2cap
powernow_k8 16576 1
cpufreq_userspace 6560 0
cpufreq_stats 9312 0
freq_table 7104 2 powernow_k8,cpufreq_stats
cpufreq_powersave 3456 0
cpufreq_ondemand 10928 1
cpufreq_conservative 11272 0
video 22920 0
tc1100_wmi 10632 0
sony_acpi 7704 0
sbs 20928 0
pcc_acpi 19968 0
i2c_ec 7808 1 sbs
hotkey 14536 0
dev_acpi 17540 0
container 6656 0
button 9888 0
battery 14088 0
asus_acpi 21924 0
ac 8328 0
nls_utf8 3840 2
ntfs 109128 1
sky2 50436 0
sbp2 29448 0
lp 16584 0
tsdev 11136 0
sg 44584 0
i2c_core 29312 1 i2c_ec
serio_raw 10244 0
parport_pc 43560 1
parport 49932 2 lp,parport_pc
shpchp 49068 0
pci_hotplug 38912 1 shpchp
pcspkr 5248 0
psmouse 51088 0
evdev 14592 2
ext3 164624 3
jbd 74024 1 ext3
ide_cd 39584 1
cdrom 43816 1 ide_cd
usbhid 51360 0
usb_storage 89792 1
libusual 21544 1 usb_storage
ohci1394 40776 0
ieee1394 387704 2 sbp2,ohci1394
ehci_hcd 40456 0
ohci_hcd 25988 0
usbcore 167840 6 usbhid,usb_storage,libusual,ehci_hcd,ohci_hcd
ide_generic 2944 0
generic 7428 0
sd_mod 25728 8
sata_nv 13572 5
libata 88984 1 sata_nv
scsi_mod 181424 5 sbp2,sg,usb_storage,sd_mod,libata
thermal 19472 0
processor 38280 2 powernow_k8,thermal
fan 7432 0
capability 7304 0
commoncap 10752 1 capability
vesafb 11048 1
cfbcopyarea 5376 1 vesafb
cfbimgblt 4352 1 vesafb
cfbfillrect 6272 1 vesafb
fbcon 45824 72
tileblit 4736 1 fbcon
font 10240 1 fbcon
bitblit 8064 1 fbcon
softcursor 3968 1 bitblit
Codice: Seleziona tutto
[ 0.000000] Bootdata ok (command line is root=/dev/sda7 ro quiet nosplash vga=791)
[ 0.000000] Linux version 2.6.17-10-generic (root@crested) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Fri Oct 13 15:34:39 UTC 2006 (Ubuntu 2.6.17-10.33-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP (v000 Nvidia ) @ 0x00000000000f8370
[ 0.000000] ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff3040
[ 0.000000] ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff30c0
[ 0.000000] ACPI: SSDT (v001 PTLTD POWERNOW 0x00000001 LTP 0x00000001) @ 0x000000003fff95c0
[ 0.000000] ACPI: HPET (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000098) @ 0x000000003fff9800
[ 0.000000] ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff9880
[ 0.000000] ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff9500
[ 0.000000] ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] Number of nodes 1
[ 0.000000] Node 0 MemBase 0000000000000000 Limit 000000003fff0000
[ 0.000000] NUMA: Using 63 for the hash shift.
[ 0.000000] Using node hash shift of 63
[ 0.000000] Bootmem setup node 0 0000000000000000-000000003fff0000
[ 0.000000] On node 0 totalpages: 257082
[ 0.000000] DMA zone: 2577 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 254505 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:11 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 15:11 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Setting APIC routing to physical flat
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000)
[ 0.000000] Checking aperture...
[ 0.000000] CPU 0: aperture @ a28e000000 size 32 MB
[ 0.000000] Aperture from northbridge cpu 0 too small (32 MB)
[ 0.000000] No AGP bridge found
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] Built 1 zonelists
[ 0.000000] Kernel command line: root=/dev/sda7 ro quiet nosplash vga=791
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] time.c: Using 25.000000 MHz WALL HPET GTOD HPET timer.
[ 0.000000] time.c: Detected 2009.250 MHz processor.
[ 29.057931] Console: colour dummy device 80x25
[ 29.058590] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 29.059572] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 29.070814] Memory: 1020476k/1048512k available (2129k kernel code, 27648k reserved, 1424k data, 188k init)
[ 29.148017] Calibrating delay using timer specific routine.. 4023.14 BogoMIPS (lpj=8046283)
[ 29.148073] Security Framework v1.0.0 initialized
[ 29.148079] SELinux: Disabled at boot.
[ 29.148101] Mount-cache hash table entries: 256
[ 29.148243] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 29.148246] CPU: L2 Cache: 512K (64 bytes/line)
[ 29.148249] CPU 0/0(2) -> Node 0 -> Core 0
[ 29.148267] SMP alternatives: switching to UP code
[ 29.148508] checking if image is initramfs... it is
[ 29.667923] Freeing initrd memory: 6216k freed
[ 29.671808] ACPI: Core revision 20060707
[ 29.674748] ACPI: Looking for DSDT ... not found!
[ 29.719515] Using local APIC timer interrupts.
[ 29.769225] result 12557812
[ 29.769227] Detected 12.557 MHz APIC timer.
[ 29.771385] SMP alternatives: switching to SMP code
[ 29.771506] Booting processor 1/2 APIC 0x1
[ 29.780405] Initializing CPU#1
[ 29.857661] Calibrating delay using timer specific routine.. 4018.00 BogoMIPS (lpj=8036019)
[ 29.857667] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 29.857670] CPU: L2 Cache: 512K (64 bytes/line)
[ 29.857672] CPU 1/1(2) -> Node 0 -> Core 1
[ 29.857747] AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
[ 29.861654] CPU 1: Syncing TSC to CPU 0.
[ 29.863113] CPU 1: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 541 cycles)
[ 29.863119] Brought up 2 CPUs
[ 29.863163] testing NMI watchdog ... OK.
[ 30.768237] migration_cost=291
[ 30.768536] NET: Registered protocol family 16
[ 30.768563] ACPI: bus type pci registered
[ 30.772055] PCI: Using MMCONFIG at f0000000
[ 30.772082] PCI: No mmconfig possible on device 0:18
[ 30.779723] ACPI: Interpreter enabled
[ 30.779725] ACPI: Using IOAPIC for interrupt routing
[ 30.780316] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 30.780319] PCI: Probing PCI hardware (bus 00)
[ 30.787087] PCI: Ignoring BAR0-3 of IDE controller 0000:00:06.0
[ 30.787314] PCI: Transparent bridge - 0000:00:04.0
[ 30.787364] Boot video device is 0000:02:00.0
[ 30.787580] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 30.874511] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 30.876596] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 30.876956] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 30.877311] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 30.877673] ACPI: PCI Interrupt Link [LNK4] (IRQs *5 7 9 10 11 14 15)
[ 30.878035] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 30.878393] ACPI: PCI Interrupt Link [LNK6] (IRQs *5 7 9 10 11 14 15)
[ 30.878747] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 30.879107] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 *11 14 15)
[ 30.879462] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 30.879818] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 30.880173] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15)
[ 30.880528] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 30.880882] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
[ 30.881237] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 30.881600] ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15)
[ 30.881964] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15)
[ 30.882318] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 30.882674] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15)
[ 30.883030] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15)
[ 30.883479] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 30.883917] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 30.884358] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[ 30.884794] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 30.885231] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[ 30.885669] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
[ 30.886109] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[ 30.886545] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[ 30.886981] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0, disabled.
[ 30.887421] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
[ 30.887859] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
[ 30.888298] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[ 30.888735] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled.
[ 30.889173] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
[ 30.889616] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
[ 30.890088] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[ 30.890529] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 30.890967] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
[ 30.891406] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
[ 30.895271] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 30.895286] pnp: PnP ACPI init
[ 30.903950] pnp: PnP ACPI: found 15 devices
[ 30.904005] PCI: Using ACPI for IRQ routing
[ 30.904010] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 30.904089] hpet0: at MMIO 0xfeff0000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 31
[ 30.904094] hpet0: 3 32-bit timers, 25000000 Hz
[ 30.905143] PCI-DMA: Disabling IOMMU.
[ 30.905679] pnp: 00:01: ioport range 0x1000-0x107f could not be reserved
[ 30.905683] pnp: 00:01: ioport range 0x1080-0x10ff has been reserved
[ 30.905687] pnp: 00:01: ioport range 0x1400-0x147f has been reserved
[ 30.905690] pnp: 00:01: ioport range 0x1480-0x14ff could not be reserved
[ 30.905693] pnp: 00:01: ioport range 0x1800-0x187f has been reserved
[ 30.905697] pnp: 00:01: ioport range 0x1880-0x18ff has been reserved
[ 30.905940] PCI: Bridge: 0000:00:04.0
[ 30.905943] IO window: b000-bfff
[ 30.905947] MEM window: fde00000-fdefffff
[ 30.905950] PREFETCH window: fdf00000-fdffffff
[ 30.905956] PCI: Bridge: 0000:00:09.0
[ 30.905958] IO window: a000-afff
[ 30.905961] MEM window: fa000000-fcffffff
[ 30.905964] PREFETCH window: e0000000-efffffff
[ 30.905967] PCI: Bridge: 0000:00:0b.0
[ 30.905969] IO window: 9000-9fff
[ 30.905972] MEM window: fdd00000-fddfffff
[ 30.905975] PREFETCH window: fdc00000-fdcfffff
[ 30.905977] PCI: Bridge: 0000:00:0c.0
[ 30.905979] IO window: 8000-8fff
[ 30.905982] MEM window: fdb00000-fdbfffff
[ 30.905985] PREFETCH window: fda00000-fdafffff
[ 30.905994] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 30.906000] PCI: Setting latency timer of device 0000:00:09.0 to 64
[ 30.906005] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 30.906011] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 30.906062] NET: Registered protocol family 2
[ 30.945722] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 30.945953] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 30.947281] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 30.947957] TCP: Hash tables configured (established 131072 bind 65536)
[ 30.947960] TCP reno registered
[ 30.948396] IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
[ 30.948752] audit: initializing netlink socket (disabled)
[ 30.948764] audit(1171526768.896:1): initialized
[ 30.948932] VFS: Disk quotas dquot_6.5.1
[ 30.948954] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 30.949009] Initializing Cryptographic API
[ 30.949013] io scheduler noop registered
[ 30.949022] io scheduler anticipatory registered
[ 30.949032] io scheduler deadline registered
[ 30.949053] io scheduler cfq registered (default)
[ 30.949620] PCI: Setting latency timer of device 0000:00:09.0 to 64
[ 30.949625] pcie_portdrv_probe->Dev[03e8:10de] has invalid IRQ. Check vendor BIOS
[ 30.949640] assign_interrupt_mode Found MSI capability
[ 30.949683] Allocate Port Service[0000:00:09.0:pcie00]
[ 30.949719] Allocate Port Service[0000:00:09.0:pcie03]
[ 30.949754] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 30.949757] pcie_portdrv_probe->Dev[03e9:10de] has invalid IRQ. Check vendor BIOS
[ 30.949770] assign_interrupt_mode Found MSI capability
[ 30.949786] Allocate Port Service[0000:00:0b.0:pcie00]
[ 30.949819] Allocate Port Service[0000:00:0b.0:pcie03]
[ 30.949851] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 30.949854] pcie_portdrv_probe->Dev[03e9:10de] has invalid IRQ. Check vendor BIOS
[ 30.949867] assign_interrupt_mode Found MSI capability
[ 30.949883] Allocate Port Service[0000:00:0c.0:pcie00]
[ 30.949909] Allocate Port Service[0000:00:0c.0:pcie03]
[ 30.971114] Real Time Clock Driver v1.12ac
[ 30.971292] hpet_resources: 0xfeff0000 is busy
[ 30.971301] Linux agpgart interface v0.101 (c) Dave Jones
[ 30.971304] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 30.971423] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 30.971570] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 30.971999] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 30.972173] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 30.972356] mice: PS/2 mouse device common for all mice
[ 30.972881] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 30.972992] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 30.972996] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 30.973163] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 31.512523] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 31.512913] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 31.513549] TCP bic registered
[ 31.518552] NET: Registered protocol family 1
[ 31.518557] NET: Registered protocol family 8
[ 31.518559] NET: Registered protocol family 20
[ 31.518658] ACPI: (supports S0 S3 S4 S5)
[ 31.518705] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 31.518730] Freeing unused kernel memory: 188k freed
[ 31.560013] input: AT Translated Set 2 keyboard as /class/input/input0
[ 31.593042] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc20010100000, using 3072k, total 262144k
[ 31.593048] vesafb: mode is 1024x768x16, linelength=2048, pages=1
[ 31.593050] vesafb: scrolling: redraw
[ 31.593053] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 31.608117] Console: switching to colour frame buffer device 128x48
[ 31.608122] fb0: VESA VGA frame buffer device
[ 31.616458] Capability LSM initialized
[ 31.641133] ACPI: Fan [FAN] (on)
[ 31.645868] ACPI: Thermal Zone [THRM] (25 C)
[ 31.996291] SCSI subsystem initialized
[ 31.999819] libata version 1.20 loaded.
[ 32.000928] sata_nv 0000:00:08.0: version 0.8
[ 32.001435] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[ 32.001441] GSI 16 sharing vector 0xC9 and IRQ 16
[ 32.001448] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 201
[ 32.001654] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 32.001745] ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xDC00 irq 201
[ 32.001823] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xDC08 irq 201
[ 32.204055] ata1: SATA link up 3.0 Gbps (SStatus 123)
[ 32.367954] ata1: dev 0 cfg 49:2f00 82:746b 83:7f61 84:4023 85:7468 86:3c41 87:4023 88:407f
[ 32.367958] ata1: dev 0 ATA-7, max UDMA/133, 625142448 sectors: LBA48
[ 32.375937] ata1: dev 0 configured for UDMA/133
[ 32.375939] scsi0 : sata_nv
[ 32.579578] ata2: SATA link down (SStatus 0)
[ 32.579581] scsi1 : sata_nv
[ 32.579683] Vendor: ATA Model: WDC WD3200JS-00P Rev: 21.0
[ 32.579691] Type: Direct-Access ANSI SCSI revision: 05
[ 32.580222] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
[ 32.580227] GSI 17 sharing vector 0xD1 and IRQ 17
[ 32.580233] ACPI: PCI Interrupt 0000:00:08.1[B] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 209
[ 32.580450] PCI: Setting latency timer of device 0000:00:08.1 to 64
[ 32.580514] ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xC800 irq 209
[ 32.580534] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xC808 irq 209
[ 32.584532] SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
[ 32.584545] sda: Write Protect is off
[ 32.584547] sda: Mode Sense: 00 3a 00 00
[ 32.584561] SCSI device sda: drive cache: write back
[ 32.584605] SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
[ 32.584613] sda: Write Protect is off
[ 32.584615] sda: Mode Sense: 00 3a 00 00
[ 32.584627] SCSI device sda: drive cache: write back
[ 32.584632] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 >
[ 32.645738] sd 0:0:0:0: Attached scsi disk sda
[ 32.783345] ata3: SATA link down (SStatus 0)
[ 32.783351] scsi2 : sata_nv
[ 32.987066] ata4: SATA link down (SStatus 0)
[ 32.987072] scsi3 : sata_nv
[ 33.151305] Probing IDE interface ide0...
[ 33.167344] usbcore: registered new driver usbfs
[ 33.167371] usbcore: registered new driver hub
[ 33.175718] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[ 33.176244] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
[ 33.176250] GSI 18 sharing vector 0xD9 and IRQ 18
[ 33.176257] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, low) -> IRQ 217
[ 33.176435] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 33.176441] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 33.176586] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 33.203350] ohci_hcd 0000:00:02.0: irq 217, io mem 0xfe02f000
[ 33.217172] ieee1394: Initialized config rom entry `ip1394'
[ 33.260888] usb usb1: configuration #1 chosen from 1 choice
[ 33.260986] hub 1-0:1.0: USB hub found
[ 33.260997] hub 1-0:1.0: 10 ports detected
[ 33.363216] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
[ 33.363221] GSI 19 sharing vector 0xE1 and IRQ 19
[ 33.363227] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 20 (level, low) -> IRQ 225
[ 33.363403] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 33.363409] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 33.363633] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[ 33.363662] ehci_hcd 0000:00:02.1: debug port 1
[ 33.363666] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[ 33.363680] ehci_hcd 0000:00:02.1: irq 225, io mem 0xfe02e000
[ 33.363688] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 33.363824] usb usb2: configuration #1 chosen from 1 choice
[ 33.363921] hub 2-0:1.0: USB hub found
[ 33.363929] hub 2-0:1.0: 10 ports detected
[ 33.467083] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[ 33.467089] GSI 20 sharing vector 0xE9 and IRQ 20
[ 33.467095] ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 233
[ 33.467102] PCI: Setting latency timer of device 0000:01:09.0 to 64
[ 33.517267] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[233] MMIO=[fdeff000-fdeff7ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 34.013890] hda: HL-DT-STDVD+-RW GSA-H21N, ATAPI CD/DVD-ROM drive
[ 34.073663] usb 2-6: new high speed USB device using ehci_hcd and address 3
[ 34.222190] usb 2-6: configuration #1 chosen from 1 choice
[ 34.349310] Probing IDE interface ide1...
[ 34.525106] usb 1-5: new low speed USB device using ohci_hcd and address 2
[ 34.739697] usb 1-5: configuration #1 chosen from 1 choice
[ 34.742728] usbcore: registered new driver libusual
[ 34.746416] Initializing USB Mass Storage driver...
[ 34.746500] scsi4 : SCSI emulation for USB Mass Storage devices
[ 34.746551] usb-storage: device found at 3
[ 34.746554] usb-storage: waiting for device to settle before scanning
[ 34.746567] usbcore: registered new driver usb-storage
[ 34.746571] USB Mass Storage support registered.
[ 34.749555] usbcore: registered new driver hiddev
[ 34.766722] input: Acer IR Receiver as /class/input/input1
[ 34.766749] input,hiddev96: USB HID v1.10 Keyboard [Acer IR Receiver] on usb-0000:00:02.0-5
[ 34.766763] usbcore: registered new driver usbhid
[ 34.766766] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 34.784954] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00000ae6ff700fb4]
[ 34.908633] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 34.917109] hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
[ 34.917117] Uniform CD-ROM driver Revision: 3.20
[ 34.970055] Attempting manual resume
[ 34.995879] kjournald starting. Commit interval 5 seconds
[ 34.995908] EXT3-fs: mounted filesystem with ordered data mode.
[ 39.738420] usb-storage: device scan complete
[ 39.744391] Vendor: Generic- Model: Compact Flash Rev: 1.00
[ 39.744399] Type: Direct-Access ANSI SCSI revision: 00
[ 39.750307] Vendor: Generic- Model: SM/xD-Picture Rev: 1.00
[ 39.750314] Type: Direct-Access ANSI SCSI revision: 00
[ 39.756355] Vendor: Generic- Model: SD/MMC Rev: 1.00
[ 39.756363] Type: Direct-Access ANSI SCSI revision: 00
[ 39.765013] Vendor: Generic- Model: MS/MS-Pro Rev: 1.00
[ 39.765021] Type: Direct-Access ANSI SCSI revision: 00
[ 39.769238] sd 4:0:0:0: Attached scsi removable disk sdb
[ 39.771851] sd 4:0:0:1: Attached scsi removable disk sdc
[ 39.774474] sd 4:0:0:2: Attached scsi removable disk sdd
[ 39.777096] sd 4:0:0:3: Attached scsi removable disk sde
[ 41.634540] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 41.712401] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 42.112734] parport: PnPBIOS parport detected.
[ 42.112781] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 42.232760] input: PC Speaker as /class/input/input2
[ 42.288071] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 42.288108] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 42.288137] sd 4:0:0:1: Attached scsi generic sg2 type 0
[ 42.288164] sd 4:0:0:2: Attached scsi generic sg3 type 0
[ 42.288193] sd 4:0:0:3: Attached scsi generic sg4 type 0
[ 42.909869] input: ImPS/2 Logitech Wheel Mouse as /class/input/input3
[ 42.920368] ts: Compaq touchscreen protocol output
[ 43.095416] lp0: using parport0 (interrupt-driven).
[ 43.127880] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[ 43.127884] ieee1394: sbp2: Try serialize_io=0 for better performance
[ 43.185197] Adding 2096440k swap on /dev/disk/by-uuid/b411908d-2da0-479a-9e42-eeb839417b61. Priority:-1 extents:1 across:2096440k
[ 43.330812] EXT3 FS on sda7, internal journal
[ 43.595184] kjournald starting. Commit interval 5 seconds
[ 43.601571] EXT3 FS on sda6, internal journal
[ 43.601577] EXT3-fs: mounted filesystem with ordered data mode.
[ 43.615014] kjournald starting. Commit interval 5 seconds
[ 43.621567] EXT3 FS on sda8, internal journal
[ 43.621571] EXT3-fs: mounted filesystem with ordered data mode.
[ 43.693566] NTFS driver 2.1.27 [Flags: R/O MODULE].
[ 43.730879] NTFS volume version 3.1.
[ 45.845513] ACPI: Power Button (FF) [PWRF]
[ 45.845525] ACPI: Power Button (CM) [PWRB]
[ 45.957938] ibm_acpi: ec object not found
[ 45.997002] pcc_acpi: loading...
[ 46.269370] powernow-k8: Found 2 AMD Athlon 64 / Opteron processors (version 1.60.2)
[ 46.269501] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0xc (1250 mV)
[ 46.269506] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xe (1200 mV)
[ 46.269509] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV)
[ 46.269515] cpu_init done, current fid 0xc, vid 0xc
[ 51.419436] Bluetooth: Core ver 2.8
[ 51.419441] NET: Registered protocol family 31
[ 51.419443] Bluetooth: HCI device and connection manager initialized
[ 51.419460] Bluetooth: HCI socket layer initialized
[ 51.469181] Bluetooth: L2CAP ver 2.8
[ 51.469186] Bluetooth: L2CAP socket layer initialized
[ 51.633061] Bluetooth: RFCOMM socket layer initialized
[ 51.633081] Bluetooth: RFCOMM TTY layer initialized
[ 51.633083] Bluetooth: RFCOMM ver 1.7
[ 63.574592] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 63.601535] ISOFS: changing to secondary root
[ 85.193806] usb 2-8: new high speed USB device using ehci_hcd and address 4
[ 85.262038] usb 2-8: configuration #1 chosen from 1 choice
[ 85.262269] scsi5 : SCSI emulation for USB Mass Storage devices
[ 85.262160] usb-storage: device found at 4
[ 85.262162] usb-storage: waiting for device to settle before scanning
[ 87.758853] usb-storage: device scan complete
[ 87.758930] Vendor: Model: USB DISK Pro Rev: PMAP
[ 87.758939] Type: Direct-Access ANSI SCSI revision: 00
[ 87.759230] Vendor: Model: USB DISK Pro Rev: PMAP
[ 87.759239] Type: Direct-Access ANSI SCSI revision: 00
[ 88.042336] SCSI device sdf: 1967104 512-byte hdwr sectors (1007 MB)
[ 88.042646] sdf: Write Protect is off
[ 88.042649] sdf: Mode Sense: 23 00 00 00
[ 88.042651] sdf: assuming drive cache: write through
[ 88.043769] SCSI device sdf: 1967104 512-byte hdwr sectors (1007 MB)
[ 88.044081] sdf: Write Protect is off
[ 88.044083] sdf: Mode Sense: 23 00 00 00
[ 88.044085] sdf: assuming drive cache: write through
[ 88.044089] sdf: sdf1
[ 88.044637] sd 5:0:0:0: Attached scsi removable disk sdf
[ 88.044689] sd 5:0:0:0: Attached scsi generic sg5 type 0
[ 88.045614] SCSI device sdg: 2880 512-byte hdwr sectors (1 MB)
[ 88.045925] sdg: Write Protect is off
[ 88.045928] sdg: Mode Sense: 23 94 00 00
[ 88.045930] sdg: assuming drive cache: write through
[ 88.046986] SCSI device sdg: 2880 512-byte hdwr sectors (1 MB)
[ 88.047297] sdg: Write Protect is off
[ 88.047301] sdg: Mode Sense: 23 94 00 00
[ 88.047304] sdg: assuming drive cache: write through
[ 88.047308] sdg: unknown partition table
[ 88.048264] sd 5:0:0:1: Attached scsi removable disk sdg
[ 88.048302] sd 5:0:0:1: Attached scsi generic sg6 type 0
[ 90.835063] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
