Ho un modem Agere AC'97 con la connessione Teleconomy di Telecom. L'unico modo per navigare è come spiegava Trevino qui, è inserire la stringa di inizializzazione 2 ATX3+MS=34 che limita la velocità a 33.6k
Ora, trovato un nuovo driver qui, seguo sempre la guida di Trevino che suggerisce di decomprimere il file scaricato (nel mio caso slamr-2.6.17-10-generic.tar.gz) entrare nella cartella aprire il terminale e digitare
Codice: Seleziona tutto
sudo sh setupCodice: Seleziona tutto
When asked about your country, Enter:
USA
Installing the Debian packages supporting autoloading
(Lettura del database ... 107434 file e directory attualmente installati.)
Mi preparo a sostituire sl-modem-daemon 2.9.10+2.9.9d+e-pre2-5build1 (con sl-modem-daemon_2.9.10+2.9.9d+e-pre2-5build1_i386.deb) ...
Shutting down SmartLink Modem driver normally.
Unloading modem driver from kernel ... slamr.
Spacchetto il sostituto di sl-modem-daemon ...
Configuro sl-modem-daemon (2.9.10+2.9.9d+e-pre2-5build1) ...
Starting SmartLink Modem driver for: slamr0.
Creating /dev/modem symlink, pointing to: /dev/ttySL0.
Copying over newer files
cp: impossibile fare stat di `sl-modem-daemon.modutils': Nessun file o directory
Making folder /lib/modules/2.6.17-11-generic/extra
Copying drivers to /lib/modules/2.6.17-11-generic/extra
Checking driver install
slamr.ko slusb.ko ungrab-winmodem.ko
Finished installs.
Informing the System
Starting function tests, loading drivers:
Running diagnostic:
[17179597.892000] slamr: module license 'Smart Link Ltd.' taints kernel.
[17179597.892000] slamr: SmartLink AMRMO modem.
[17179597.892000] slamr: probe 1039:7013 SiS630 card...
[17179597.904000] slamr: mc97 codec is SIL27
[17179597.904000] slamr: slamr0 is SiS630 card.
[17182195.892000] slamr: SmartLink AMRMO modem.
[17182195.892000] slamr: probe 1039:7013 SiS630 card...
[17182195.908000] slamr: mc97 codec is SIL27
[17182195.908000] slamr: slamr0 is SiS630 card.
[17182220.132000] slamr: SmartLink AMRMO modem.
[17182220.132000] slamr: probe 1039:7013 SiS630 card...
[17182220.152000] slamr: mc97 codec is SIL27
[17182220.152000] slamr: slamr0 is SiS630 card.
ports should be created by:
slmodemd -c USA /dev/slamr0
error: mdm setup: cannot open dev `/dev/slamr0': Device or resource busy
error: cannot setup device `/dev/slamr0'
Checking for success
Running wvdialconf
Editing `/etc/wvdial.conf'.
Scanning your serial ports for a modem.
Modem Port Scan<*1>: S0 S1 S2 S3
WvModem<*1>: Cannot get information for serial port.
ttySL0<*1>: ATQ0 V1 E1 -- OK
ttySL0<*1>: ATQ0 V1 E1 Z -- OK
ttySL0<*1>: ATQ0 V1 E1 S0=0 -- OK
ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttySL0<*1>: Modem Identifier: ATI -- SmartLink Soft Modem
ttySL0<*1>: Speed 4800: AT -- OK
ttySL0<*1>: Speed 9600: AT -- OK
ttySL0<*1>: Speed 19200: AT -- OK
ttySL0<*1>: Speed 38400: AT -- OK
ttySL0<*1>: Speed 57600: AT -- OK
ttySL0<*1>: Speed 115200: AT -- OK
ttySL0<*1>: Speed 230400: AT -- OK
ttySL0<*1>: Speed 460800: AT -- OK
ttySL0<*1>: Max speed is 460800; that should be safe.
ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
Found a modem on /dev/ttySL0.
Modem configuration written to /etc/wvdial.conf.
ttySL0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
Modem detection successful
edit /etc/wvdial.conf with:
sudo gedit /etc/wvdial.conf
at the lines beginning with ; and deleting the ;
Then dialout with:
sudo wvdial
Running setup again is NOT necessary. Only for dialout the:
sudo wvdial
Read the Slamr.txt record, other 1st_Read.txt CountryList.txt wvdial.txt files and the sample wvdial.conf.
Secondo voi ho qualche speranza di navigare a più di 33,6k ? :-\
P.S. Dimenticavo: ho kubuntu 6.10 (correttamente installato ed aggiornato) ed uso kppp per la connessione.
