scanner brother mfc5490cn non visibile 18.04

[criceto45]

Codice: Seleziona tutto

giuseppe@giuseppe-X71TL:~$ sudo scanimage -L
[sudo] password di giuseppe: 

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
giuseppe@giuseppe-X71TL:~$ sudo sane-find-scanner

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

could not fetch string descriptor: Pipe error
could not fetch string descriptor: Pipe error
found USB scanner (vendor=0x18d1, product=0x4ee7) at libusb:001:003
found USB scanner (vendor=0x04f9 [Brother], product=0x01f5 [MFC-5490CN]) at libusb:001:005
  # Your USB scanner was (probably) detected. It may or may not be supported by
  # SANE. Try scanimage -L and read the backend's manpage.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.
giuseppe@giuseppe-X71TL:~$ 

ora non lo fa piu

[magozurlinux]

Da terminale postami questi comandi:

Codice: Seleziona tutto

cat /etc/sane.d/dll.conf

Codice: Seleziona tutto

groups

[criceto45]

Codice: Seleziona tutto

giuseppe@giuseppe-X71TL:~$ cat /etc/sane.d/dll.conf
# dll.conf - Configuration file for the SANE dynamic backend loader
#
# Backends can also be enabled by configuration snippets under the dll.d/
# directory -- third party backends can drop their configuration file in
# this in this directory, named after the backend.
#
# The next line enables the network backend; comment it out if you don't
# need to use a remote SANE scanner over the network -- see sane-net(5)
# and saned(8) for details.
net
abaton
agfafocus
apple
avision
artec
artec_eplus48u
as6e
bh
canon
canon630u
canon_dr
#canon_pp
cardscan
coolscan
#coolscan2
coolscan3
#dc25
#dc210
#dc240
dell1600n_net
dmc
epjitsu
#epson
epson2
epsonds
fujitsu
#gphoto2
genesys
gt68xx
hp
hp3900
hpsj5s
hp3500
hp4200
hp5400
hp5590
hpljm1005
hs2p
ibm
kodak
kodakaio
kvs1025
kvs20xx
leo
lexmark
ma1509
magicolor
matsushita
microtek
microtek2
mustek
#mustek_pp
mustek_usb
mustek_usb2
nec
niash
#p5
pie
pint
pixma
plustek
#plustek_pp
#pnm
qcam
ricoh
rts8891
s9036
sceptre
sharp
sm3600
sm3840
snapscan
sp15c
#st400
#stv680
tamarack
teco1
teco2
teco3
#test
u12
umax
#umax_pp
umax1220u
v4l
xerox_mfp
brother3



brother4
giuseppe@giuseppe-X71TL:~$ groups
giuseppe adm cdrom sudo dip plugdev lpadmin sambashare
giuseppe@giuseppe-X71TL:~$ 

devo ridurre gli spazi fra il 3 e il 4? manca il 2 devo metterlo? spazi ridotti

[magozurlinux]

brother2 non devi metterlo, devi togliere gli spazi tra il 3 ed il 4.

Da terminale dai questi comandi:

Codice: Seleziona tutto

sudo adduser giuseppe scanner

Codice: Seleziona tutto

sudo adduser giuseppe saned

Codice: Seleziona tutto

sudo adduser giuseppe lp

riavvia il pc, prova lo scanner.

[criceto45]

fatto tutto ma non va

Codice: Seleziona tutto

giuseppe@giuseppe-X71TL:~$ sudo adduser giuseppe scanner
[sudo] password di giuseppe: 
L'utente «giuseppe» fa già parte del gruppo «scanner».
giuseppe@giuseppe-X71TL:~$ sudo adduser giuseppe saned
L'utente «giuseppe» fa già parte del gruppo «saned».
giuseppe@giuseppe-X71TL:~$ sudo adduser giuseppe lp
L'utente «giuseppe» fa già parte del gruppo «lp».
giuseppe@giuseppe-X71TL:~$ 

[magozurlinux]

OK!

da terminale postami questo comando:

Codice: Seleziona tutto

cat /etc/sane.d/brother.conf

[criceto45]

Codice: Seleziona tutto

giuseppe@giuseppe-X71TL:~$ cat /etc/sane.d/brother.conf
cat: /etc/sane.d/brother.conf: File o directory non esistente
giuseppe@giuseppe-X71TL:~$ 

bisogna crearla?

[magozurlinux]

Da terminale dai questi comandi:

Codice: Seleziona tutto

sudo gedit /etc/sane.d/brother.conf

copia e incolla queste righe:

Codice: Seleziona tutto

# Brother USB
# For libusb support for unknown scanners use the following command
# usb <product ID> <device ID>
usb 0x04f9 0x01f5

salva ed esci dall'editor di testo.

Riavvia il pc.

Da terminale postami questi comandi:

Codice: Seleziona tutto

sudo scanimage -L

Codice: Seleziona tutto

sudo sane-find-scanner

Codice: Seleziona tutto

brsaneconfig4  -q

[criceto45]

simple scan ci ha riprovato

Codice: Seleziona tutto

giuseppe@giuseppe-X71TL:~$ sudo scanimage -L
[sudo] password di giuseppe: 

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
giuseppe@giuseppe-X71TL:~$ sudo sane-find-scanner

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

could not fetch string descriptor: Pipe error
could not fetch string descriptor: Pipe error
found USB scanner (vendor=0x18d1, product=0x4ee7) at libusb:001:004
found USB scanner (vendor=0x04f9 [Brother], product=0x01f5 [MFC-5490CN]) at libusb:001:003
  # Your USB scanner was (probably) detected. It may or may not be supported by
  # SANE. Try scanimage -L and read the backend's manpage.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.
giuseppe@giuseppe-X71TL:~$ brsaneconfig4  -q
USAGE: brsaneconfig4 [-OPTION]   OPTION:
       -a name=FRIENDLY-NAME model=MODEL-NAME ip=xx.xx.xx.xx    
       -a name=FRIENDLY-NAME model=MODEL-NAME nodename=BRN_xxxxx 
                   : Add network scanner
       -r FRIENDLY-NAME [FRIENDLY-NAME ...]
                   : Remove network scanner
       -d          : Diagnosis
       -p          : Ping (for network scanners)  
       -s:[LABEL]  : Save current configuration
       -l:[LABEL]  : Load saved configuration
giuseppe@giuseppe-X71TL:~$ 

vado al lavoro.lasciami pure le istruxioni grazie.a stasera o domani mattina

[magozurlinux]

Prego, di nulla!

Da terminale postami questi comandi con la Brother accesa:

Codice: Seleziona tutto

brscan-skey -l

Codice: Seleziona tutto

brsaneconfig4 -d

Codice: Seleziona tutto

dpkg -l | grep sane

[criceto45]

eccoti il tutto

Codice: Seleziona tutto

giuseppe@giuseppe-X71TL:~$ brscan-skey -l

 MFC-5490CN        : brother3:bus6;dev2  : USB                  Not registered
giuseppe@giuseppe-X71TL:~$ brsaneconfig4 -d
-----------------------------
cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda1 during installation
UUID=d5ba6209-177c-4c36-b375-91cbb8e01bba /               ext4    errors=remount-ro 0       1
# /home was on /dev/sda3 during installation
UUID=dbe6b7b7-4e30-4fb5-aac2-113380e487f3 /home           ext4    defaults        0       2
# swap was on /dev/sda5 during installation
UUID=4e6dd0ca-d558-48f2-98d7-f177750ac026 none            swap    sw              0       0
-----------------------------
sane-find-scanner

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

could not open USB device 0x1d6b/0x0002 at 002:001: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0001 at 006:001: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0001 at 005:001: Access denied (insufficient permissions)
could not open USB device 0x04f2/0xb012 at 001:005: Access denied (insufficient permissions)
found USB scanner (vendor=0x04f9 [Brother], product=0x01f5 [MFC-5490CN]) at libusb:001:003
could not open USB device 0x1d6b/0x0002 at 001:001: Access denied (insufficient permissions)
could not open USB device 0x18d1/0x4ee7 at 004:002: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0001 at 004:001: Access denied (insufficient permissions)
could not open USB device 0x0000/0x0538 at 003:002: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0001 at 003:001: Access denied (insufficient permissions)
  # Your USB scanner was (probably) detected. It may or may not be supported by
  # SANE. Try scanimage -L and read the backend's manpage.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.

  # You may want to run this program as root to find all devices. Once you
  # found the scanner devices, be sure to adjust access permissions as
  # necessary.
-----------------------------
ls -R -all /proc/bus/usb
ls: impossibile accedere a '/proc/bus/usb': File o directory non esistente
-----------------------------
cat /proc/bus/usb/devices
cat: /proc/bus/usb/devices: File o directory non esistente
-----------------------------
scanimage -L

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
-----------------------------
-----------------------------
/etc/opt/brother/scanner/brscan4//brsanenetdevice4.cfg:
-----------------------------
/etc/opt/brother/scanner/brscan4//Brsane4.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_5.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_9.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_14.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_17.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_4.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_16.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_6.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_3.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_18.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_7.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_2.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_15.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_20.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_10.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_11.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_1.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_13.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_12.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_8.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_19.ini:
-----------------------------
-----------------------------
ping
giuseppe@giuseppe-X71TL:~$ dpkg -l | grep sane
ii  libsane-common                                1.0.27-1~experimental3ubuntu2       all          API library for scanners -- documentation and support files
ii  libsane-dev:amd64                             1.0.27-1~experimental3ubuntu2       amd64        API development library for scanners [development files]
ii  libsane-extras:amd64                          1.0.22.5                            amd64        API library for scanners -- extra backends
ii  libsane-extras-common                         1.0.22.5                            all          API library for scanners -- documentation and support files
ii  libsane-hpaio:amd64                           3.17.10+repack0-5                   amd64        HP SANE backend for multi-function peripherals
ii  libsane1:amd64                                1.0.27-1~experimental3ubuntu2       amd64        API library for scanners
ii  sane                                          1.0.14-12build1                     amd64        scanner graphical frontends
ii  sane-dbg                                      1.0.14-12build1                     amd64        scanner graphical frontends (debug symbols)
ii  sane-utils                                    1.0.27-1~experimental3ubuntu2       amd64        API library for scanners -- utilities
ii  xsane                                         0.999-5ubuntu2                      amd64        featureful graphical frontend for SANE (Scanner Access Now Easy)
ii  xsane-common                                  0.999-5ubuntu2                      all          xsane architecture independent files
ii  xsane-dbg:amd64                               0.999-5ubuntu2                      amd64        featureful graphical frontend for SANE (Debug files)
giuseppe@giuseppe-X71TL:~$ 

[magozurlinux]

brscan-skey -l

MFC-5490CN : brother3:bus6;dev2 : USB Not registered

Da terminale dai questi comandi:

Codice: Seleziona tutto

sudo gedit /etc/sane.d/dll.conf

vai in fondo al file; cancella o commenta con un # la riga brother4.

salva ed esci dall'editor di testo.

Riavvia il pc.

Da terminale postami questo comando:

Codice: Seleziona tutto

grep 04f9 /lib/udev/rules.d/60-libsane1.rules

[criceto45]

Codice: Seleziona tutto

s9036
sceptre
sharp
sm3600
sm3840
snapscan
sp15c
#st400
#stv680
tamarack
teco1
teco2
teco3
#test
u12
umax
#umax_pp
umax1220u
v4l
xerox_mfp
brother3
#brother4

ora riavvio

Codice: Seleziona tutto

giuseppe@giuseppe-X71TL:~$ grep 04f9 /lib/udev/rules.d/60-libsane1.rules
ATTRS{idVendor}=="04f9", ATTRS{idProduct}=="01f5", ENV{libsane_matched}="yes"
giuseppe@giuseppe-X71TL:~$ 

[magozurlinux]

Da terminale dai questi comandi:

Codice: Seleziona tutto

sudo gedit  /lib/udev/rules.d/60-libsane1.rules

modifica la riga così:

ATTRS{idVendor}=="04f9", ATTRS{idProduct}=="01f5", MODE="664", GROUP="scanner", ENV{libsane_matched}="yes"

salva ed esci dall'editor di testo.

Codice: Seleziona tutto

sudo service udev restart

riavvia il pc e prova lo scanner.

[criceto45]

ci prova con simple compaino i pallini ma poi non lo rileva

Codice: Seleziona tutto

# Hewlett-Packard ScanJet 5p
ATTRS{type}=="3", ATTRS{vendor}=="HP", ATTRS{model}=="C5110A", ENV{libsane_matched}="yes"

# Hewlett-Packard ScanJet 6200C
ATTRS{type}=="3", ATTRS{vendor}=="HP", ATTRS{model}=="C6270A", ENV{libsane_matched}="yes"

# Hewlett-Packard ScanJet 6300C
ATTRS{type}=="3", ATTRS{vendor}=="HP", ATTRS{model}=="C7670A", ENV{libsane_matched}="yes"

# Brother MFC-5490CN
ATTRS{idVendor}=="04f9", ATTRS{idProduct}=="01f5", MODE="664", GROUP="scanner", ENV{libsane_matched}="yes"

LABEL="libsane_rules_end"

[magozurlinux]

Da terminale postami questo comando:

Codice: Seleziona tutto

simple-scan -d

[criceto45]

Codice: Seleziona tutto

iuseppe@giuseppe-X71TL:~$ simple-scan -d
[+0,00s] DEBUG: simple-scan.vala:637: Starting Simple Scan 3.28.0, PID=7805
[+0,13s] CRITICAL: g_action_print_detailed_name: assertion 'g_action_name_is_valid (action_name)' failed
[+0,13s] CRITICAL: gtk_application_set_accels_for_action: assertion 'detailed_action_name != NULL' failed
[+0,20s] DEBUG: app-window.vala:1714: Loading state from /home/giuseppe/.cache/simple-scan/state
[+0,20s] DEBUG: app-window.vala:1671: Restoring window to 600x400 pixels
[+0,20s] DEBUG: autosave-manager.vala:64: Loading autosave information
[+0,20s] DEBUG: autosave-manager.vala:259: Waiting to autosave...
[+0,38s] DEBUG: scanner.vala:1454: sane_init () -> SANE_STATUS_GOOD
[+0,38s] DEBUG: autosave-manager.vala:281: Autosaving book information
[+0,38s] DEBUG: scanner.vala:1460: SANE version 1.0.27
[+0,38s] DEBUG: scanner.vala:1521: Requesting redetection of scan devices
[+0,38s] DEBUG: scanner.vala:806: Processing request
[+0,47s] DEBUG: app-window.vala:1775: Saving state to /home/giuseppe/.cache/simple-scan/state
[+0,68s] DEBUG: app-window.vala:1775: Saving state to /home/giuseppe/.cache/simple-scan/state
[+1,01s] DEBUG: app-window.vala:1775: Saving state to /home/giuseppe/.cache/simple-scan/state
[+6,93s] DEBUG: scanner.vala:341: sane_get_devices () -> SANE_STATUS_GOOD
[+6,93s] DEBUG: scanner.vala:1521: Requesting redetection of scan devices
[+6,94s] DEBUG: scanner.vala:806: Processing request
[+7,04s] DEBUG: app-window.vala:1775: Saving state to /home/giuseppe/.cache/simple-scan/state
[+11,50s] DEBUG: app-window.vala:1775: Saving state to /home/giuseppe/.cache/simple-scan/state
[+11,58s] DEBUG: autosave-manager.vala:195: Deleting autosave records
[+11,58s] DEBUG: scanner.vala:1597: Stopping scan thread
[+12,93s] DEBUG: scanner.vala:341: sane_get_devices () -> SANE_STATUS_GOOD
[+12,93s] DEBUG: scanner.vala:806: Processing request
[+12,95s] DEBUG: scanner.vala:1608: sane_exit ()
[+12,95s] CRITICAL: app_window_set_scan_devices: assertion 'self != NULL' failed
giuseppe@giuseppe-X71TL:~$ 

xsane non lo vede

[magozurlinux]

Per xsane:

Hai dato questo comando:

Codice: Seleziona tutto

sudo xsane

da terminale dai questo comando:

Codice: Seleziona tutto

export SANE_DEBUG_DLL=255

da terminale postami questo comando

Codice: Seleziona tutto

scanimage --test

[criceto45]

sudo xsane non produce risultati

Codice: Seleziona tutto

giuseppe@giuseppe-X71TL:~$ sudo xsane
[sudo] password di giuseppe: 
Gtk-Message: 22:56:04.804: Failed to load module "canberra-gtk-module"
giuseppe@giuseppe-X71TL:~$ 

ecco gli altri comandi

Codice: Seleziona tutto

giuseppe@giuseppe-X71TL:~$ export SANE_DEBUG_DLL=255
giuseppe@giuseppe-X71TL:~$ scanimage --test
[sanei_debug] Setting debug level of dll to 255.
[dll] sane_init: SANE dll backend version 1.0.13 from sane-backends 1.0.27
[dll] sane_init/read_dlld: attempting to open directory `./dll.d'
[dll] sane_init/read_dlld: attempting to open directory `/etc/sane.d/dll.d'
[dll] sane_init/read_dlld: using config directory `/etc/sane.d/dll.d'
[dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/hplip
[dll] sane_init/read_config: reading dll.d/hplip
[dll] add_backend: adding backend `hpaio'
[dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/libsane-extras
[dll] sane_init/read_config: reading dll.d/libsane-extras
[dll] add_backend: adding backend `ls5000'
[dll] sane_init/read_dlld: done.
[dll] sane_init/read_config: reading dll.conf
[dll] add_backend: adding backend `net'
[dll] add_backend: adding backend `abaton'
[dll] add_backend: adding backend `agfafocus'
[dll] add_backend: adding backend `apple'
[dll] add_backend: adding backend `avision'
[dll] add_backend: adding backend `artec'
[dll] add_backend: adding backend `artec_eplus48u'
[dll] add_backend: adding backend `as6e'
[dll] add_backend: adding backend `bh'
[dll] add_backend: adding backend `canon'
[dll] add_backend: adding backend `canon630u'
[dll] add_backend: adding backend `canon_dr'
[dll] add_backend: adding backend `cardscan'
[dll] add_backend: adding backend `coolscan'
[dll] add_backend: adding backend `coolscan3'
[dll] add_backend: adding backend `dell1600n_net'
[dll] add_backend: adding backend `dmc'
[dll] add_backend: adding backend `epjitsu'
[dll] add_backend: adding backend `epson2'
[dll] add_backend: adding backend `epsonds'
[dll] add_backend: adding backend `fujitsu'
[dll] add_backend: adding backend `genesys'
[dll] add_backend: adding backend `gt68xx'
[dll] add_backend: adding backend `hp'
[dll] add_backend: adding backend `hp3900'
[dll] add_backend: adding backend `hpsj5s'
[dll] add_backend: adding backend `hp3500'
[dll] add_backend: adding backend `hp4200'
[dll] add_backend: adding backend `hp5400'
[dll] add_backend: adding backend `hp5590'
[dll] add_backend: adding backend `hpljm1005'
[dll] add_backend: adding backend `hs2p'
[dll] add_backend: adding backend `ibm'
[dll] add_backend: adding backend `kodak'
[dll] add_backend: adding backend `kodakaio'
[dll] add_backend: adding backend `kvs1025'
[dll] add_backend: adding backend `kvs20xx'
[dll] add_backend: adding backend `leo'
[dll] add_backend: adding backend `lexmark'
[dll] add_backend: adding backend `ma1509'
[dll] add_backend: adding backend `magicolor'
[dll] add_backend: adding backend `matsushita'
[dll] add_backend: adding backend `microtek'
[dll] add_backend: adding backend `microtek2'
[dll] add_backend: adding backend `mustek'
[dll] add_backend: adding backend `mustek_usb'
[dll] add_backend: adding backend `mustek_usb2'
[dll] add_backend: adding backend `nec'
[dll] add_backend: adding backend `niash'
[dll] add_backend: adding backend `pie'
[dll] add_backend: adding backend `pint'
[dll] add_backend: adding backend `pixma'
[dll] add_backend: adding backend `plustek'
[dll] add_backend: adding backend `qcam'
[dll] add_backend: adding backend `ricoh'
[dll] add_backend: adding backend `rts8891'
[dll] add_backend: adding backend `s9036'
[dll] add_backend: adding backend `sceptre'
[dll] add_backend: adding backend `sharp'
[dll] add_backend: adding backend `sm3600'
[dll] add_backend: adding backend `sm3840'
[dll] add_backend: adding backend `snapscan'
[dll] add_backend: adding backend `sp15c'
[dll] add_backend: adding backend `tamarack'
[dll] add_backend: adding backend `teco1'
[dll] add_backend: adding backend `teco2'
[dll] add_backend: adding backend `teco3'
[dll] add_backend: adding backend `u12'
[dll] add_backend: adding backend `umax'
[dll] add_backend: adding backend `umax1220u'
[dll] add_backend: adding backend `v4l'
[dll] add_backend: adding backend `xerox_mfp'
[dll] add_backend: adding backend `brother3'
[dll] sane_get_devices
[dll] load: searching backend `brother3' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-brother3.so.1'
[dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-brother3.so.1' (No such file or directory)
[dll] load: couldn't find backend `brother3' (No such file or directory)
[dll] load: searching backend `xerox_mfp' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-xerox_mfp.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-xerox_mfp.so.1'
[dll] init: initializing backend `xerox_mfp'
[dll] init: backend `xerox_mfp' is version 1.0.13
[dll] load: searching backend `v4l' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-v4l.so.1'
[dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-v4l.so.1' (No such file or directory)
[dll] load: couldn't find backend `v4l' (No such file or directory)
[dll] load: searching backend `umax1220u' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-umax1220u.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-umax1220u.so.1'
[dll] init: initializing backend `umax1220u'
[dll] init: backend `umax1220u' is version 1.0.2
[dll] load: searching backend `umax' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-umax.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-umax.so.1'
[dll] init: initializing backend `umax'
[dll] init: backend `umax' is version 1.0.45
[dll] load: searching backend `u12' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-u12.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-u12.so.1'
[dll] init: initializing backend `u12'
[dll] init: backend `u12' is version 1.0.0
[dll] load: searching backend `teco3' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco3.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco3.so.1'
[dll] init: initializing backend `teco3'
[dll] init: backend `teco3' is version 1.0.1
[dll] load: searching backend `teco2' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco2.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco2.so.1'
[dll] init: initializing backend `teco2'
[dll] init: backend `teco2' is version 1.0.10
[dll] load: searching backend `teco1' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco1.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco1.so.1'
[dll] init: initializing backend `teco1'
[dll] init: backend `teco1' is version 1.0.10
[dll] load: searching backend `tamarack' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-tamarack.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-tamarack.so.1'
[dll] init: initializing backend `tamarack'
[dll] init: backend `tamarack' is version 1.0.0
[dll] load: searching backend `sp15c' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sp15c.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sp15c.so.1'
[dll] init: initializing backend `sp15c'
[dll] init: backend `sp15c' is version 1.0.0
[dll] load: searching backend `snapscan' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-snapscan.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-snapscan.so.1'
[dll] init: initializing backend `snapscan'
[dll] init: backend `snapscan' is version 1.4.53
[dll] load: searching backend `sm3840' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3840.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3840.so.1'
[dll] init: initializing backend `sm3840'
[dll] init: backend `sm3840' is version 1.0.0
[dll] load: searching backend `sm3600' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3600.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3600.so.1'
[dll] init: initializing backend `sm3600'
[dll] init: backend `sm3600' is version 1.0.6
[dll] load: searching backend `sharp' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sharp.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sharp.so.1'
[dll] init: initializing backend `sharp'
[dll] init: backend `sharp' is version 1.0.0
[dll] load: searching backend `sceptre' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sceptre.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sceptre.so.1'
[dll] init: initializing backend `sceptre'
[dll] init: backend `sceptre' is version 1.0.10
[dll] load: searching backend `s9036' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-s9036.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-s9036.so.1'
[dll] init: initializing backend `s9036'
[dll] init: backend `s9036' is version 1.0.0
[dll] load: searching backend `rts8891' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-rts8891.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-rts8891.so.1'
[dll] init: initializing backend `rts8891'
[dll] init: backend `rts8891' is version 1.0.2401
[dll] load: searching backend `ricoh' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh.so.1'
[dll] init: initializing backend `ricoh'
[dll] init: backend `ricoh' is version 1.0.0
[dll] load: searching backend `qcam' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-qcam.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-qcam.so.1'
[dll] init: initializing backend `qcam'
[dll] init: backend `qcam' is version 1.0.0
[dll] load: searching backend `plustek' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-plustek.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-plustek.so.1'
[dll] init: initializing backend `plustek'
[dll] init: backend `plustek' is version 1.0.0
[dll] load: searching backend `pixma' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1'
[dll] init: initializing backend `pixma'
[dll] init: backend `pixma' is version 1.0.17
[dll] load: searching backend `pint' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pint.so.1'
[dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-pint.so.1' (No such file or directory)
[dll] load: couldn't find backend `pint' (No such file or directory)
[dll] load: searching backend `pie' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pie.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pie.so.1'
[dll] init: initializing backend `pie'
[dll] init: backend `pie' is version 1.0.9
[dll] load: searching backend `niash' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-niash.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-niash.so.1'
[dll] init: initializing backend `niash'
[dll] init: backend `niash' is version 1.0.1
[dll] load: searching backend `nec' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-nec.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-nec.so.1'
[dll] init: initializing backend `nec'
[dll] init: backend `nec' is version 1.0.0
[dll] load: searching backend `mustek_usb2' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb2.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb2.so.1'
[dll] init: initializing backend `mustek_usb2'
[dll] init: backend `mustek_usb2' is version 1.0.10
[dll] load: searching backend `mustek_usb' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb.so.1'
[dll] init: initializing backend `mustek_usb'
[dll] init: backend `mustek_usb' is version 1.0.18
[dll] load: searching backend `mustek' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek.so.1'
[dll] init: initializing backend `mustek'
[dll] init: backend `mustek' is version 1.0.138
[dll] load: searching backend `microtek2' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek2.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek2.so.1'
[dll] init: initializing backend `microtek2'
[dll] init: backend `microtek2' is version 1.0.0
[dll] load: searching backend `microtek' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek.so.1'
[dll] init: initializing backend `microtek'
[dll] init: backend `microtek' is version 1.0.0
[dll] load: searching backend `matsushita' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-matsushita.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-matsushita.so.1'
[dll] init: initializing backend `matsushita'
[dll] init: backend `matsushita' is version 1.0.7
[dll] load: searching backend `magicolor' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-magicolor.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-magicolor.so.1'
[dll] init: initializing backend `magicolor'
[dll] init: backend `magicolor' is version 1.0.1
[dll] load: searching backend `ma1509' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ma1509.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ma1509.so.1'
[dll] init: initializing backend `ma1509'
[dll] init: backend `ma1509' is version 1.0.3
[dll] load: searching backend `lexmark' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-lexmark.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-lexmark.so.1'
[dll] init: initializing backend `lexmark'
[dll] init: backend `lexmark' is version 1.0.32
[dll] load: searching backend `leo' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-leo.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-leo.so.1'
[dll] init: initializing backend `leo'
[dll] init: backend `leo' is version 1.0.11
[dll] load: searching backend `kvs20xx' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs20xx.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs20xx.so.1'
[dll] init: initializing backend `kvs20xx'
[dll] init: backend `kvs20xx' is version 1.0.2
[dll] load: searching backend `kvs1025' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs1025.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs1025.so.1'
[dll] init: initializing backend `kvs1025'
[dll] init: backend `kvs1025' is version 1.0.5
[dll] load: searching backend `kodakaio' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kodakaio.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kodakaio.so.1'
[dll] init: initializing backend `kodakaio'
[dll] init: backend `kodakaio' is version 1.0.3
[dll] load: searching backend `kodak' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kodak.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kodak.so.1'
[dll] init: initializing backend `kodak'
[dll] init: backend `kodak' is version 1.0.7
[dll] load: searching backend `ibm' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ibm.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ibm.so.1'
[dll] init: initializing backend `ibm'
[dll] init: backend `ibm' is version 1.0.0
[dll] load: searching backend `hs2p' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hs2p.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hs2p.so.1'
[dll] init: initializing backend `hs2p'
[dll] init: backend `hs2p' is version 1.0.0
[dll] load: searching backend `hpljm1005' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpljm1005.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpljm1005.so.1'
[dll] init: initializing backend `hpljm1005'
[dll] init: backend `hpljm1005' is version 1.0.1
[dll] load: searching backend `hp5590' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5590.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5590.so.1'
[dll] init: initializing backend `hp5590'
[dll] init: backend `hp5590' is version 1.0.7
[dll] load: searching backend `hp5400' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5400.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5400.so.1'
[dll] init: initializing backend `hp5400'
[dll] init: backend `hp5400' is version 1.0.3
[dll] load: searching backend `hp4200' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp4200.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp4200.so.1'
[dll] init: initializing backend `hp4200'
[dll] init: backend `hp4200' is version 1.0.0
[dll] load: searching backend `hp3500' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3500.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3500.so.1'
[dll] init: initializing backend `hp3500'
[dll] init: backend `hp3500' is version 1.0.0
[dll] load: searching backend `hpsj5s' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpsj5s.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpsj5s.so.1'
[dll] init: initializing backend `hpsj5s'
[dll] init: backend `hpsj5s' is version 1.0.3
[dll] load: searching backend `hp3900' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3900.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3900.so.1'
[dll] init: initializing backend `hp3900'
[dll] init: backend `hp3900' is version 1.0.0
[dll] load: searching backend `hp' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp.so.1'
[dll] init: initializing backend `hp'
[dll] init: backend `hp' is version 1.0.8
[dll] load: searching backend `gt68xx' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-gt68xx.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-gt68xx.so.1'
[dll] init: initializing backend `gt68xx'
[dll] init: backend `gt68xx' is version 1.0.84
[dll] load: searching backend `genesys' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-genesys.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-genesys.so.1'
[dll] init: initializing backend `genesys'
[dll] init: backend `genesys' is version 1.0.2511
[dll] load: searching backend `fujitsu' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-fujitsu.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-fujitsu.so.1'
[dll] init: initializing backend `fujitsu'
[dll] init: backend `fujitsu' is version 1.0.133
[dll] load: searching backend `epsonds' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epsonds.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epsonds.so.1'
[dll] init: initializing backend `epsonds'
[dll] init: backend `epsonds' is version 1.0.0
[dll] load: searching backend `epson2' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epson2.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epson2.so.1'
[dll] init: initializing backend `epson2'
[dll] init: backend `epson2' is version 1.0.124
[dll] load: searching backend `epjitsu' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epjitsu.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epjitsu.so.1'
[dll] init: initializing backend `epjitsu'
[dll] init: backend `epjitsu' is version 1.0.31
[dll] load: searching backend `dmc' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-dmc.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-dmc.so.1'
[dll] init: initializing backend `dmc'
[dll] init: backend `dmc' is version 1.0.0
[dll] load: searching backend `dell1600n_net' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-dell1600n_net.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-dell1600n_net.so.1'
[dll] init: initializing backend `dell1600n_net'
[dll] init: backend `dell1600n_net' is version 1.0.0
[dll] load: searching backend `coolscan3' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan3.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan3.so.1'
[dll] init: initializing backend `coolscan3'
[dll] init: backend `coolscan3' is version 1.0.0
[dll] load: searching backend `coolscan' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan.so.1'
[dll] init: initializing backend `coolscan'
[dll] init: backend `coolscan' is version 1.0.0
[dll] load: searching backend `cardscan' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-cardscan.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-cardscan.so.1'
[dll] init: initializing backend `cardscan'
[dll] init: backend `cardscan' is version 1.0.3
[dll] load: searching backend `canon_dr' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1'
[dll] init: initializing backend `canon_dr'
[dll] init: backend `canon_dr' is version 1.0.56
[dll] load: searching backend `canon630u' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1'
[dll] init: initializing backend `canon630u'
[dll] init: backend `canon630u' is version 1.0.1
[dll] load: searching backend `canon' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1'
[dll] init: initializing backend `canon'
[dll] init: backend `canon' is version 1.0.0
[dll] load: searching backend `bh' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-bh.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-bh.so.1'
[dll] init: initializing backend `bh'
[dll] init: backend `bh' is version 1.0.4
[dll] load: searching backend `as6e' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-as6e.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-as6e.so.1'
[dll] init: initializing backend `as6e'
[dll] load: searching backend `artec_eplus48u' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-artec_eplus48u.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-artec_eplus48u.so.1'
[dll] init: initializing backend `artec_eplus48u'
[dll] init: backend `artec_eplus48u' is version 1.0.0
[dll] load: searching backend `artec' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-artec.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-artec.so.1'
[dll] init: initializing backend `artec'
[dll] init: backend `artec' is version 1.0.0
[dll] load: searching backend `avision' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-avision.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-avision.so.1'
[dll] init: initializing backend `avision'
[dll] init: backend `avision' is version 1.0.297
[dll] load: searching backend `apple' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-apple.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-apple.so.1'
[dll] init: initializing backend `apple'
[dll] init: backend `apple' is version 1.0.0
[dll] load: searching backend `agfafocus' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-agfafocus.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-agfafocus.so.1'
[dll] init: initializing backend `agfafocus'
[dll] init: backend `agfafocus' is version 1.0.0
[dll] load: searching backend `abaton' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-abaton.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-abaton.so.1'
[dll] init: initializing backend `abaton'
[dll] init: backend `abaton' is version 1.0.0
[dll] load: searching backend `net' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1'
[dll] init: initializing backend `net'
[dll] init: backend `net' is version 1.0.27
[dll] load: searching backend `ls5000' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ls5000.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ls5000.so.1'
[dll] init: initializing backend `ls5000'
[dll] init: backend `ls5000' is version 1.0.0
[dll] load: searching backend `hpaio' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpaio.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpaio.so.1'
[dll] init: initializing backend `hpaio'
[dll] init: backend `hpaio' is version 1.0.0
[dll] sane_get_devices: found 0 devices
scanimage: no SANE devices found
[dll] sane_exit: exiting
[dll] sane_exit: calling backend `xerox_mfp's exit function
[dll] sane_exit: calling backend `umax1220u's exit function
[dll] sane_exit: calling backend `umax's exit function
[dll] sane_exit: calling backend `u12's exit function
[dll] sane_exit: calling backend `teco3's exit function
[dll] sane_exit: calling backend `teco2's exit function
[dll] sane_exit: calling backend `teco1's exit function
[dll] sane_exit: calling backend `tamarack's exit function
[dll] sane_exit: calling backend `sp15c's exit function
[dll] sane_exit: calling backend `snapscan's exit function
[dll] sane_exit: calling backend `sm3840's exit function
[dll] sane_exit: calling backend `sm3600's exit function
[dll] sane_exit: calling backend `sharp's exit function
[dll] sane_exit: calling backend `sceptre's exit function
[dll] sane_exit: calling backend `s9036's exit function
[dll] sane_exit: calling backend `rts8891's exit function
[dll] sane_exit: calling backend `ricoh's exit function
[dll] sane_exit: calling backend `qcam's exit function
[dll] sane_exit: calling backend `plustek's exit function
[dll] sane_exit: calling backend `pixma's exit function
[dll] sane_exit: calling backend `pie's exit function
[dll] sane_exit: calling backend `niash's exit function
[dll] sane_exit: calling backend `nec's exit function
[dll] sane_exit: calling backend `mustek_usb2's exit function
[dll] sane_exit: calling backend `mustek_usb's exit function
[dll] sane_exit: calling backend `mustek's exit function
[dll] sane_exit: calling backend `microtek2's exit function
[dll] sane_exit: calling backend `microtek's exit function
[dll] sane_exit: calling backend `matsushita's exit function
[dll] sane_exit: calling backend `magicolor's exit function
[dll] sane_exit: calling backend `ma1509's exit function
[dll] sane_exit: calling backend `lexmark's exit function
[dll] sane_exit: calling backend `leo's exit function
[dll] sane_exit: calling backend `kvs20xx's exit function
[dll] sane_exit: calling backend `kvs1025's exit function
[dll] sane_exit: calling backend `kodakaio's exit function
[dll] sane_exit: calling backend `kodak's exit function
[dll] sane_exit: calling backend `ibm's exit function
[dll] sane_exit: calling backend `hs2p's exit function
[dll] sane_exit: calling backend `hpljm1005's exit function
[dll] sane_exit: calling backend `hp5590's exit function
[dll] sane_exit: calling backend `hp5400's exit function
[dll] sane_exit: calling backend `hp4200's exit function
[dll] sane_exit: calling backend `hp3500's exit function
[dll] sane_exit: calling backend `hpsj5s's exit function
[dll] sane_exit: calling backend `hp3900's exit function
[dll] sane_exit: calling backend `hp's exit function
[dll] sane_exit: calling backend `gt68xx's exit function
[dll] sane_exit: calling backend `genesys's exit function
[dll] sane_exit: calling backend `fujitsu's exit function
[dll] sane_exit: calling backend `epsonds's exit function
[dll] sane_exit: calling backend `epson2's exit function
[dll] sane_exit: calling backend `epjitsu's exit function
[dll] sane_exit: calling backend `dmc's exit function
[dll] sane_exit: calling backend `dell1600n_net's exit function
[dll] sane_exit: calling backend `coolscan3's exit function
[dll] sane_exit: calling backend `coolscan's exit function
[dll] sane_exit: calling backend `cardscan's exit function
[dll] sane_exit: calling backend `canon_dr's exit function
[dll] sane_exit: calling backend `canon630u's exit function
[dll] sane_exit: calling backend `canon's exit function
[dll] sane_exit: calling backend `bh's exit function
[dll] sane_exit: calling backend `artec_eplus48u's exit function
[dll] sane_exit: calling backend `artec's exit function
[dll] sane_exit: calling backend `avision's exit function
[dll] sane_exit: calling backend `apple's exit function
[dll] sane_exit: calling backend `agfafocus's exit function
[dll] sane_exit: calling backend `abaton's exit function
[dll] sane_exit: calling backend `net's exit function
[dll] sane_exit: calling backend `ls5000's exit function
[dll] sane_exit: calling backend `hpaio's exit function
[dll] sane_exit: finished
giuseppe@giuseppe-X71TL:~$ 

[magozurlinux]

Da terminale connesso ad Internet dai questo comando:

Codice: Seleziona tutto

sudo apt-get install libcanberra-gtk*