[Risolto] Internet key e Ubuntu 16.04

[Senderos]

Salve, ho inserito una chiavetta in Ubuntu 16, dopo un pò trova la banda larga ed esce la scritta "I TIM HSDPA", quindi provo a connettermi, ma è come se la chiavetta si scollegasse dalla porta usb e si reinserisse immediatamente, quindi network manager inizia a cercare nuovamente la rete. Ho provato anche con sakis3g, quando mi connetto esce "loading device", ma subito dopo il programma si chiude e sparisce anche l'icona dal launcher.
In Ubuntu 12 la chiavetta funziona. A chiavetta inserita, ma a connessione non effettuata, se vado su Impostazioni di sistema ---> Rete ---> Banda Larga Mobile mi esce "IMEI +CGSN con il numero di serie (credo)", mentre Ubuntu 16 non mi da alcuna informazione.

[magozurlinux]

Da terminale postami questi comandi con la chiavetta Internet inserita:

Codice: Seleziona tutto

lsusb

Codice: Seleziona tutto

dmesg | grep usb

[Senderos]

Codice: Seleziona tutto

lsusb
Bus 001 Device 011: ID 1e0e:9000 Qualcomm / Option 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Codice: Seleziona tutto

dmesg | grep usb
[    0.170016] usbcore: registered new interface driver usbfs
[    0.170038] usbcore: registered new interface driver hub
[    0.170063] usbcore: registered new device driver usb
[    1.865683] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.865688] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.865692] usb usb1: Product: EHCI Host Controller
[    1.865695] usb usb1: Manufacturer: Linux 4.4.0-31-generic ehci_hcd
[    1.865699] usb usb1: SerialNumber: 0000:00:1d.7
[    1.866904] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.866908] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.866912] usb usb2: Product: UHCI Host Controller
[    1.866916] usb usb2: Manufacturer: Linux 4.4.0-31-generic uhci_hcd
[    1.866919] usb usb2: SerialNumber: 0000:00:1d.0
[    1.867729] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.867733] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.867737] usb usb3: Product: UHCI Host Controller
[    1.867741] usb usb3: Manufacturer: Linux 4.4.0-31-generic uhci_hcd
[    1.867744] usb usb3: SerialNumber: 0000:00:1d.1
[    1.868581] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.868586] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.868589] usb usb4: Product: UHCI Host Controller
[    1.868593] usb usb4: Manufacturer: Linux 4.4.0-31-generic uhci_hcd
[    1.868597] usb usb4: SerialNumber: 0000:00:1d.2
[    1.869388] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.869392] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.869396] usb usb5: Product: UHCI Host Controller
[    1.869400] usb usb5: Manufacturer: Linux 4.4.0-31-generic uhci_hcd
[    1.869403] usb usb5: SerialNumber: 0000:00:1d.3
[ 1302.692173] usb 1-8: new high-speed USB device number 2 using ehci-pci
[ 1302.827801] usb 1-8: New USB device found, idVendor=1e0e, idProduct=f000
[ 1302.827808] usb 1-8: New USB device strings: Mfr=3, Product=2, SerialNumber=4
[ 1302.827812] usb 1-8: Product: MYWAVE  
[ 1302.827816] usb 1-8: Manufacturer: MYWAVE  
[ 1302.827819] usb 1-8: SerialNumber: 1234567890ABCDEF
[ 1303.060242] usb-storage 1-8:1.0: USB Mass Storage device detected
[ 1303.068175] scsi host2: usb-storage 1-8:1.0
[ 1303.068650] usbcore: registered new interface driver usb-storage
[ 1303.121640] usbcore: registered new interface driver uas
[ 1304.272061] usb 1-8: USB disconnect, device number 2
[ 1304.644169] usb 1-8: new high-speed USB device number 3 using ehci-pci
[ 1304.785548] usb 1-8: New USB device found, idVendor=1e0e, idProduct=9000
[ 1304.785555] usb 1-8: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 1304.785560] usb 1-8: Manufacturer: MYWAVE  
[ 1304.785563] usb 1-8: SerialNumber: 1234567890ABCDEF
[ 1304.794071] usb-storage 1-8:1.2: USB Mass Storage device detected
[ 1304.794698] scsi host3: usb-storage 1-8:1.2
[ 1306.362071] usbcore: registered new interface driver usbserial
[ 1306.362103] usbcore: registered new interface driver usbserial_generic
[ 1306.362138] usbserial: USB Serial support registered for generic
[ 1306.423647] usbcore: registered new interface driver option
[ 1306.423687] usbserial: USB Serial support registered for GSM modem (1-port)
[ 1306.426833] usb 1-8: GSM modem (1-port) converter now attached to ttyUSB0
[ 1306.427127] usb 1-8: GSM modem (1-port) converter now attached to ttyUSB1
[ 1306.427374] usb 1-8: GSM modem (1-port) converter now attached to ttyUSB2
[ 1470.061531] usb 1-8: USB disconnect, device number 3
[ 1474.416184] usb 1-8: new high-speed USB device number 4 using ehci-pci
[ 1474.551871] usb 1-8: New USB device found, idVendor=1e0e, idProduct=f000
[ 1474.551879] usb 1-8: New USB device strings: Mfr=3, Product=2, SerialNumber=4
[ 1474.551883] usb 1-8: Product: MYWAVE  
[ 1474.551887] usb 1-8: Manufacturer: MYWAVE  
[ 1474.551890] usb 1-8: SerialNumber: 1234567890ABCDEF
[ 1474.559761] usb-storage 1-8:1.0: USB Mass Storage device detected
[ 1474.561786] scsi host4: usb-storage 1-8:1.0
[ 1475.788834] usb 1-8: USB disconnect, device number 4
[ 1476.132177] usb 1-8: new high-speed USB device number 5 using ehci-pci
[ 1476.273368] usb 1-8: New USB device found, idVendor=1e0e, idProduct=9000
[ 1476.273375] usb 1-8: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 1476.273379] usb 1-8: Manufacturer: MYWAVE  
[ 1476.273383] usb 1-8: SerialNumber: 1234567890ABCDEF
[ 1476.281749] usb 1-8: GSM modem (1-port) converter now attached to ttyUSB0
[ 1476.282093] usb 1-8: GSM modem (1-port) converter now attached to ttyUSB1
[ 1476.282241] usb-storage 1-8:1.2: USB Mass Storage device detected
[ 1476.283259] scsi host5: usb-storage 1-8:1.2
[ 1476.286126] usb 1-8: GSM modem (1-port) converter now attached to ttyUSB2
[ 2861.338378] usb 1-8: USB disconnect, device number 5
[ 2871.380047] usb 1-8: new high-speed USB device number 6 using ehci-pci
[ 2871.515877] usb 1-8: New USB device found, idVendor=1e0e, idProduct=f000
[ 2871.515886] usb 1-8: New USB device strings: Mfr=3, Product=2, SerialNumber=4
[ 2871.515890] usb 1-8: Product: MYWAVE  
[ 2871.515894] usb 1-8: Manufacturer: MYWAVE  
[ 2871.515897] usb 1-8: SerialNumber: 1234567890ABCDEF
[ 2871.523784] usb-storage 1-8:1.0: USB Mass Storage device detected
[ 2871.532042] scsi host6: usb-storage 1-8:1.0
[ 2872.783969] usb 1-8: USB disconnect, device number 6
[ 2873.156082] usb 1-8: new high-speed USB device number 7 using ehci-pci
[ 2873.297377] usb 1-8: New USB device found, idVendor=1e0e, idProduct=9000
[ 2873.297386] usb 1-8: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 2873.297391] usb 1-8: Manufacturer: MYWAVE  
[ 2873.297395] usb 1-8: SerialNumber: 1234567890ABCDEF
[ 2873.305883] usb 1-8: GSM modem (1-port) converter now attached to ttyUSB0
[ 2873.306238] usb 1-8: GSM modem (1-port) converter now attached to ttyUSB1
[ 2873.306398] usb-storage 1-8:1.2: USB Mass Storage device detected
[ 2873.316044] scsi host7: usb-storage 1-8:1.2
[ 2873.317796] usb 1-8: GSM modem (1-port) converter now attached to ttyUSB2
[ 2938.353909] usb 1-8: USB disconnect, device number 7
[ 2943.368041] usb 1-8: new high-speed USB device number 8 using ehci-pci
[ 2943.503847] usb 1-8: New USB device found, idVendor=1e0e, idProduct=f000
[ 2943.503857] usb 1-8: New USB device strings: Mfr=3, Product=2, SerialNumber=4
[ 2943.503862] usb 1-8: Product: MYWAVE  
[ 2943.503865] usb 1-8: Manufacturer: MYWAVE  
[ 2943.503869] usb 1-8: SerialNumber: 1234567890ABCDEF
[ 2943.511875] usb-storage 1-8:1.0: USB Mass Storage device detected
[ 2943.523256] scsi host8: usb-storage 1-8:1.0
[ 2944.886676] usb 1-8: USB disconnect, device number 8
[ 2945.256132] usb 1-8: new high-speed USB device number 9 using ehci-pci
[ 2945.395094] usb 1-8: New USB device found, idVendor=1e0e, idProduct=9000
[ 2945.395105] usb 1-8: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 2945.395109] usb 1-8: Manufacturer: MYWAVE  
[ 2945.395112] usb 1-8: SerialNumber: 1234567890ABCDEF
[ 2945.402109] usb 1-8: GSM modem (1-port) converter now attached to ttyUSB0
[ 2945.402453] usb 1-8: GSM modem (1-port) converter now attached to ttyUSB1
[ 2945.402599] usb-storage 1-8:1.2: USB Mass Storage device detected
[ 2945.420043] scsi host9: usb-storage 1-8:1.2
[ 2945.420672] usb 1-8: GSM modem (1-port) converter now attached to ttyUSB2
[ 3122.859708] usb 1-8: USB disconnect, device number 9
[ 5241.380171] usb 1-8: new high-speed USB device number 10 using ehci-pci
[ 5241.515821] usb 1-8: New USB device found, idVendor=1e0e, idProduct=f000
[ 5241.515829] usb 1-8: New USB device strings: Mfr=3, Product=2, SerialNumber=4
[ 5241.515833] usb 1-8: Product: MYWAVE  
[ 5241.515837] usb 1-8: Manufacturer: MYWAVE  
[ 5241.515840] usb 1-8: SerialNumber: 1234567890ABCDEF
[ 5241.524689] usb-storage 1-8:1.0: USB Mass Storage device detected
[ 5241.525072] scsi host10: usb-storage 1-8:1.0
[ 5242.697931] usb 1-8: USB disconnect, device number 10
[ 5243.068170] usb 1-8: new high-speed USB device number 11 using ehci-pci
[ 5243.207699] usb 1-8: New USB device found, idVendor=1e0e, idProduct=9000
[ 5243.207706] usb 1-8: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 5243.207710] usb 1-8: Manufacturer: MYWAVE  
[ 5243.207713] usb 1-8: SerialNumber: 1234567890ABCDEF
[ 5243.215570] usb 1-8: GSM modem (1-port) converter now attached to ttyUSB0
[ 5243.215910] usb 1-8: GSM modem (1-port) converter now attached to ttyUSB1
[ 5243.217325] usb-storage 1-8:1.2: USB Mass Storage device detected
[ 5243.218346] scsi host11: usb-storage 1-8:1.2
[ 5243.219213] usb 1-8: GSM modem (1-port) converter now attached to ttyUSB2

[magozurlinux]

OK!

Da terminale postami questi comandi, sempre col la chiavetta Internet inserita:

Codice: Seleziona tutto

ls -l /etc/usb_modeswitch.d/

Codice: Seleziona tutto

usb-devices

Codice: Seleziona tutto

dpkg -l | grep usb-modeswitch

[Senderos]

Codice: Seleziona tutto

ls -l /etc/usb_modeswitch.d/

totale 0

Codice: Seleziona tutto

usb-devices

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 8
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev=04.04
S:  Manufacturer=Linux 4.4.0-31-generic ehci_hcd
S:  Product=EHCI Host Controller
S:  SerialNumber=0000:00:1d.7
C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub

T:  Bus=01 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#=  4 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0781 ProdID=556b Rev=01.27
S:  Manufacturer=SanDisk
S:  Product=Cruzer Edge
S:  SerialNumber=4C530101511007114033
C:  #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=200mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage

T:  Bus=01 Lev=01 Prnt=01 Port=07 Cnt=02 Dev#=  3 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1e0e ProdID=9000 Rev=00.00
S:  Manufacturer=MYWAVE  
S:  SerialNumber=1234567890ABCDEF
C:  #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 2 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option

T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0001 Rev=04.04
S:  Manufacturer=Linux 4.4.0-31-generic uhci_hcd
S:  Product=UHCI Host Controller
S:  SerialNumber=0000:00:1d.0
C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub

T:  Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0001 Rev=04.04
S:  Manufacturer=Linux 4.4.0-31-generic uhci_hcd
S:  Product=UHCI Host Controller
S:  SerialNumber=0000:00:1d.1
C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub

T:  Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0001 Rev=04.04
S:  Manufacturer=Linux 4.4.0-31-generic uhci_hcd
S:  Product=UHCI Host Controller
S:  SerialNumber=0000:00:1d.2
C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub

T:  Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0001 Rev=04.04
S:  Manufacturer=Linux 4.4.0-31-generic uhci_hcd
S:  Product=UHCI Host Controller
S:  SerialNumber=0000:00:1d.3
C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub

Codice: Seleziona tutto

dpkg -l | grep usb-modeswitch

ii  usb-modeswitch                             2.2.5+repack0-1ubuntu1                                      i386         mode switching tool for controlling "flip flop" USB devices
ii  usb-modeswitch-data                        20151101-1                                                  all          mode switching data for usb-modeswitch

[magozurlinux]

Da terminale dai questi comandi:

Codice: Seleziona tutto

sudo -H gedit /etc/usb_modeswitch.d/1e0e:f000

copia e incolla queste righe:

Codice: Seleziona tutto

########################################################
# Option iCON 210
# PROLiNK PHS100 (various looks)
# Hyundai Mobile MB-810
#
# One report of switching with DetachStorageOnly. Needs at least
# a second to settle before binding to usbserial
#
# Contributor: wahlm, Peter Kraker, Pakdhetimin Sekum

DefaultVendor=  0x1e0e
DefaultProduct= 0xf000

TargetVendor=   0x1e0e
TargetProduct=  0x9000
TargetClass=    0xff

# only for reference
MessageEndpoint=0x01

MessageContent="555342431234567800000000000006bd000000020000000000000000000000"

ResponseEndpoint=0x01

salva ed esci dall'editor di testo.

crea la regola udev per la tua chiavetta dando questi comandi:

Codice: Seleziona tutto

sudo -H gedit /etc/udev/rules.d/45-leonardo.rules

copia ed incolla queste righe:

Codice: Seleziona tutto

# Udev rules for chiavetta Leonardo

# When seen as a storage, switch it:
SUBSYSTEM=="usb", ATTRS{idVendor}=="1e0e", ATTRS{idProduct}=="f000", \
RUN+="/sbin/rmmod usb-storage", RUN+="/sbin/usb_modeswitch -c /etc/usb_modeswitch.d/1e0e:f000"

# When seen as a modem, use it:
SUBSYSTEM=="usb", ATTRS{idVendor}=="1e0e", ATTRS{idProduct}=="9000", \
RUN+="/sbin/modprobe usbserial vendor=0x1e product=0x9000"

salva ed esci dall'editor di testo.

Da terminale riavviare il servizio udev

Codice: Seleziona tutto

sudo service udev restart 

Riavvia il pc.

Dopo aver riavviato Ubuntu, inserisci la chiavetta Leonardo; da terminale postami questi comandi:

Codice: Seleziona tutto

lsusb

Codice: Seleziona tutto

dmesg | tail

prova la connessione ad Internet con chiavetta.

A presto!

[Senderos]

Codice: Seleziona tutto

lsusb

Bus 001 Device 002: ID 1e0e:9000 Qualcomm / Option 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Codice: Seleziona tutto

dmesg | tail

[   49.523380] usbserial: USB Serial support registered for generic
[   49.784454] usbcore: registered new interface driver option
[   49.785421] usbserial: USB Serial support registered for GSM modem (1-port)
[   49.785634] option 1-8:1.0: GSM modem (1-port) converter detected
[   49.786121] usb 1-8: GSM modem (1-port) converter now attached to ttyUSB0
[   49.786234] option 1-8:1.1: GSM modem (1-port) converter detected
[   49.787850] usb 1-8: GSM modem (1-port) converter now attached to ttyUSB1
[   49.787980] option 1-8:1.3: GSM modem (1-port) converter detected
[   49.794756] usb 1-8: GSM modem (1-port) converter now attached to ttyUSB2
[   50.398269] IPv6: ADDRCONF(NETDEV_UP): wlp6s5: link is not ready

Continuo ad avere lo stesso problema. Quando ho chiuso l'editor di testo, poi nel terminale sono usciti messaggi d'errore.

[magozurlinux]

Il 2° output va bene.

Il PIN della SIM è disabilitato?

Riprova con sakis3G dando questo comando da terminale:

Codice: Seleziona tutto

sudo ./sakis3g --interactive

[Senderos]

Sì, il pin è disabilitato.


Adesso Sakis3g mi da questo messaggio:

Codice: Seleziona tutto

Error occured

Port/dev/ttyUSB2 is currently occupied by 1855 ModemManager

[magozurlinux]

Da terminale dai questi comandi:

Codice: Seleziona tutto

kill 1855

Codice: Seleziona tutto

sudo ./sakis3g --interactive

[Senderos]

Oggi il messaggio d'errore non da più 1855, ma 1874.

Codice: Seleziona tutto

kill 1874

bash: kill: (1874) - Operazione non permessa

[magozurlinux]

Oggi il messaggio d'errore non da più 1855, ma 1874.

Codice: Seleziona tutto

kill 1874

bash: kill: (1874) - Operazione non permessa

Da terminale dai questi comandi:

Codice: Seleziona tutto

sudo systemctl stop ModemManager

Codice: Seleziona tutto

sudo systemctl disable ModemManager

ridai questo comando:

Codice: Seleziona tutto

sudo ./sakis3g --interactive

vedi se così funziona la tua chiavetta Internet.

[Senderos]

Rispondo solo adesso perchè ero in ferie. Adesso Sakis3g procede, ma dopo l'APN mi chiede la password e nel sito del mio operatore dice di lasciare campo vuoto e Sakis invece la richiede.

[magozurlinux]

Da terminale postami questo comando con la chiavetta Internet inserita:

Codice: Seleziona tutto

sudo mmcli -b 0

[Senderos]

Codice: Seleziona tutto

sudo mmcli -b 0

error: couldn't find the ModemManager process in the bus

[magozurlinux]

Da terminale dai questi comandi:

Codice: Seleziona tutto

sudo systemctl enable ModemManager

Codice: Seleziona tutto

sudo systemctl start ModemManager

da terminale postami di nuovo questo comando:

Codice: Seleziona tutto

sudo mmcli -b 0

[Senderos]

Codice: Seleziona tutto

sudo mmcli -b 0

error: couldn't find bearer at '/org/freedesktop/ModemManager1/Bearer/0': 'no modems found'

[magozurlinux]

Deve essere qualche bug di ModemManager.

Da terminale dai questi comandi:

Codice: Seleziona tutto

sudo systemctl stop ModemManager

Codice: Seleziona tutto

sudo systemctl disable ModemManager

ridai questo comando:

Codice: Seleziona tutto

sudo ./sakis3g --interactive

quando ti chiede la password metti tim

[Senderos]

Finalmente sono riuscito ad utilizzare la chiavetta. Ti ringrazio per il tempo che mi hai dedicato. Buona giornata.

[magozurlinux]

Prego, di nulla!

Perfetto!



Ciao

Buona giornata.