Antix

Informazioni, consigli e novità sulla galassia delle distribuzioni GNU/Linux, *nix, *BSD e su altri sistemi operativi non liberi.
Avatar utente
20111954
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1301
Iscrizione: domenica 18 ottobre 2009, 20:36
Distribuzione: Xubuntu 18.04.5 LTS
Sesso: Maschile
Località: Reggio Calabria

Antix

Messaggio da 20111954 »

Buon pomeriggio nell’aggiornare un portatile che gira con antix ho avuto la seguente risposta come procedere? grazie

Codice: Seleziona tutto

 
Trovato:1 http://deb.debian.org/debian bookworm-backports InRelease
Trovato:2 http://security.debian.org bookworm-security InRelease
Scaricamento di:3 http://it.mxrepo.com/antix/bookworm bookworm InRelease [27,5 kB]
Trovato:4 http://ftp.it.debian.org/debian bookworm-updates InRelease
Trovato:5 http://ftp.it.debian.org/debian bookworm InRelease
Errore:3 http://it.mxrepo.com/antix/bookworm bookworm InRelease
Le seguenti firme non erano valide: EXPKEYSIG DB36CDF3452F0C20 antiX Linux repo <repo@antixlinux.com>
Lettura elenco dei pacchetti...
W: Errore GPG: http://it.mxrepo.com/antix/bookworm bookworm InRelease: Le seguenti firme non erano valide: EXPKEYSIG DB36CDF3452F0C20 antiX Linux repo <repo@antixlinux.com>
E: Il repository "http://it.mxrepo.com/antix/bookworm bookworm InRelease" non è firmato.
 

Codice: Seleziona tutto

System:
  Kernel: 6.1.60-antix.1-amd64-smp arch: x86_64 bits: 64 compiler: gcc v: 12.2.0 clocksource: hpet
    available: acpi_pm parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.60-antix.1-amd64-smp
    root=UUID=65dd130b-6f14-4ec6-9fc0-272c08304518 ro quiet selinux=0
  Desktop: IceWM v: 3.4.5 dm: slimski v: 1.5.0 Distro: antiX-23.1_x64-full Arditi del Popolo 21
    February 2024 base: Debian GNU/Linux 12 (bookworm)
Machine:
  Type: Laptop System: Hewlett-Packard product: HP Compaq nx7300 (RU608ES#ABZ) v: F.0E
    serial: <superuser required> Chassis: type: 10 serial: <superuser required>
  Mobo: Hewlett-Packard model: 30A2 v: KBC Version 40.17 serial: <superuser required>
    BIOS: Hewlett-Packard v: 68YGU Ver. F.0E date: 08/27/2008
Battery:
  ID-1: C1BE charge: 11.6 Wh (100.0%) condition: 11.6/11.6 Wh (100.0%) volts: 12.6 min: 10.8
    model: Hewlett-Packard Primary type: Li-ion serial: <filter> status: full
Memory:
  System RAM: total: 2 GiB available: 1.92 GiB used: 884.7 MiB (45.0%)
  RAM Report: permissions: Unable to run dmidecode. Root privileges required.
PCI Slots:
  Permissions: Unable to run dmidecode. Root privileges required.
CPU:
  Info: model: Intel Celeron M 520 bits: 64 arch: Core2 Merom level: v1 built: 2006-09
    process: Intel 65nm family: 6 model-id: 0xF (15) stepping: 6 microcode: 0xD1
  Topology: cpus: 1x cores: 1 smt: <unsupported> cache: L1: 64 KiB desc: d-1x32 KiB; i-1x32 KiB
    L2: 1024 KiB desc: 1x1024 KiB
  Speed (MHz): 1596 min/max: N/A core: 1: 1596 bogomips: 3192
  Flags: acpi aperfmperf apic arch_perfmon bts clflush cmov constant_tsc cpuid cx16 cx8 de
    ds_cpl dtes64 dtherm dts fpu fxsr lahf_lm lm mca mce mmx monitor msr mtrr nopl nx pae pat pbe
    pdcm pebs pge pni pse pse36 pti rep_good sep sse sse2 ssse3 syscall tm tm2 tsc vme xtpr
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: itlb_multihit status: KVM: VMX unsupported
  Type: l1tf mitigation: PTE Inversion
  Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT disabled
  Type: meltdown mitigation: PTI
  Type: mmio_stale_data status: Unknown: No mitigations
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass status: Vulnerable
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Retpolines, STIBP: disabled, RSB filling, PBRSB-eIBRS: Not
    affected
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: Intel Mobile 945GM/GMS 943/940GML Express Integrated Graphics vendor: Hewlett-Packard
    driver: i915 v: kernel alternate: intelfb arch: Gen-3.5 process: Intel 90nm built: 2005-06 ports:
    active: LVDS-1 empty: SVIDEO-1,VGA-1 bus-ID: 00:02.0 chip-ID: 8086:27a2 class-ID: 0300
  Display: server: X.Org v: 1.21.1.7 driver: X: loaded: intel dri: i915 gpu: i915
    display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 1280x800 s-dpi: 96 s-size: 338x211mm (13.31x8.31") s-diag: 398mm (15.69")
  Monitor-1: LVDS-1 mapped: LVDS1 model: AU Optronics 0x1874 built: 2005 res: 1280x800 hz: 60
    dpi: 98 gamma: 1.2 chroma: red: x: 0.600 y: 0.341 green: x: 0.310 y: 0.561 blue: x: 0.149
    y: 0.114 white: x: 0.314 y: 0.329 size: 331x207mm (13.03x8.15") diag: 390mm (15.4")
    ratio: 16:10 modes: 1280x800
  API: EGL v: 1.5 hw: drv: intel i915 platforms: device: 0 egl: 1.4 drv: i915 device: 1
    drv: swrast gbm: egl: 1.4 drv: i915 surfaceless: egl: 1.4 drv: i915 x11: egl: 1.4 drv: i915
    inactive: wayland
  API: OpenGL v: 2.1 vendor: mesa v: 22.3.6 glx-v: 1.4 es-v: 2.0 direct-render: yes
    renderer: i915 (: 945GM) device-ID: 8086:27a2 memory: 187.5 MiB unified: yes
Audio:
  Device-1: Intel NM10/ICH7 Family High Definition Audio vendor: Hewlett-Packard
    driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:27d8 class-ID: 0403
  API: ALSA v: k6.1.60-antix.1-amd64-smp status: kernel-api with: apulse type: pulse-emulator
    tools: alsactl,alsamixer,amixer
  Server-1: PipeWire v: 1.2.1 status: off with: 1: pipewire-pulse status: off 2: wireplumber
    status: off 3: pipewire-alsa type: plugin 4: pw-jack type: plugin tools: pw-cat,pw-cli,wpctl
Network:
  Device-1: Broadcom BCM4401-B0 100Base-TX vendor: Hewlett-Packard NX7300 laptop driver: b44
    v: kernel port: N/A bus-ID: 02:0e.0 chip-ID: 14e4:170c class-ID: 0200
  Device-2: Broadcom BCM4311 802.11b/g WLAN vendor: Hewlett-Packard driver: b43-pci-bridge v: N/A
    modules: ssb,wl pcie: gen: 1 speed: 2.5 GT/s lanes: 1 bus-ID: 10:00.0 chip-ID: 14e4:4311
    class-ID: 0280
  IF-ID-1: eth0 state: down mac: <filter>
  IF-ID-2: wlan0 state: up mac: <filter>
  IP v4: <filter> scope: global broadcast: <filter>
  IP v6: <filter> scope: link
  WAN IP: <filter>
Bluetooth:
  Device-1: HP Bluetooth 2.0 Interface [Broadcom BCM2045] driver: btusb v: 0.8 type: USB rev: 2.0
    speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 2-1:2 chip-ID: 03f0:171d class-ID: fe01
  Report: hciconfig ID: hci0 rfk-id: 1 state: down bt-service: running rfk-block: hardware: no
    software: yes address: <filter>
  Info: acl-mtu: 1017:8 sco-mtu: 64:8 link-policy: rswitch hold sniff park
    link-mode: peripheral accept
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 111.79 GiB used: 7.35 GiB (6.6%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/sda maj-min: 8:0 vendor: Kingston model: SA400S37120G size: 111.79 GiB block-size:
    physical: 512 B logical: 512 B speed: 1.5 Gb/s tech: SSD serial: <filter> fw-rev: 61K1
    scheme: GPT
  Optical-1: /dev/sr0 vendor: HL-DT-ST model: DVDRAM GSA-T10N rev: PC05
    dev-links: cdrom,cdrw,dvd,dvdrw
  Features: speed: 24 multisession: yes audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram
    state: running
Partition:
  ID-1: / raw-size: 111.79 GiB size: 109.47 GiB (97.93%) used: 7.35 GiB (6.7%) fs: ext4
    dev: /dev/sda2 maj-min: 8:2 label: rootantiX23 uuid: 65dd130b-6f14-4ec6-9fc0-272c08304518
Swap:
  Kernel: swappiness: 10 (default 60) cache-pressure: 50 (default 100) zswap: no
  ID-1: swap-1 type: file size: 1024 MiB used: 68.5 MiB (6.7%) priority: -2 file: /swap/swap
Unmounted:
  ID-1: /dev/sda1 maj-min: 8:1 size: 1024 KiB fs: <superuser required> label: N/A uuid: N/A
USB:
  Hub-1: 1-0:1 info: full speed or root hub ports: 8 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1
    mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 2-0:1 info: full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s (1.4 MiB/s) lanes: 1
    mode: 1.1 chip-ID: 1d6b:0001 class-ID: 0900
  Device-1: 2-1:2 info: HP Bluetooth 2.0 Interface [Broadcom BCM2045] type: bluetooth
    driver: btusb interfaces: 4 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1
    chip-ID: 03f0:171d class-ID: fe01
  Hub-3: 3-0:1 info: full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s (1.4 MiB/s) lanes: 1
    mode: 1.1 chip-ID: 1d6b:0001 class-ID: 0900
  Hub-4: 4-0:1 info: full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s (1.4 MiB/s) lanes: 1
    mode: 1.1 chip-ID: 1d6b:0001 class-ID: 0900
  Device-1: 4-2:2 info: HP HP 1000 USB Optical Mouse type: mouse driver: hid-generic,usbhid
    interfaces: 1 rev: 2.0 speed: 1.5 Mb/s (183 KiB/s) lanes: 1 mode: 1.0 power: 100mA
    chip-ID: 03f0:2a41 class-ID: 0301
  Hub-5: 5-0:1 info: full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s (1.4 MiB/s) lanes: 1
    mode: 1.1 chip-ID: 1d6b:0001 class-ID: 0900
Sensors:
  System Temperatures: cpu: 59.0 C mobo: N/A
  Fan Speeds (rpm): N/A
Repos:
  Packages: pm: dpkg pkgs: 1760 libs: 838 tools: apt,apt-get,aptitude,synaptic
  Active apt repos in: /etc/apt/sources.list.d/antix.list
    1: deb [signed-by=/etc/apt/keyrings/antix-archive-keyring.gpg] http: //it.mxrepo.com/antix/bookworm bookworm main nonfree nosystemd
  Active apt repos in: /etc/apt/sources.list.d/bookworm-backports.list
    1: deb http: //deb.debian.org/debian bookworm-backports main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http: //ftp.it.debian.org/debian/ bookworm-updates main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http: //ftp.it.debian.org/debian/ bookworm main contrib non-free non-free-firmware
    2: deb http: //security.debian.org/ bookworm-security main contrib non-free non-free-firmware
  No active apt repos in: /etc/apt/sources.list.d/librewolf.list
  No active apt repos in: /etc/apt/sources.list.d/liquorix.list
Processes:
  CPU top: 5 of 139
  1: cpu: 100% command: ps pid: 19296 mem: 3.20 MiB (0.1%)
  2: cpu: 33.9% command: yad pid: 19281 mem: 31.9 MiB (1.6%)
  3: cpu: 7.8% command: firefox-esr pid: 5725 mem: 365.6 MiB (18.6%)
  4: cpu: 3.0% command: xorg pid: 1706 mem: 43.2 MiB (2.1%)
  5: cpu: 2.0% command: firefox-esr pid: 5924 mem: 129.0 MiB (6.5%)
  Memory top: 5 of 139
  1: mem: 365.6 MiB (18.6%) command: firefox-esr pid: 5725 cpu: 7.8%
  2: mem: 129.0 MiB (6.5%) command: firefox-esr pid: 5924 cpu: 2.0%
  3: mem: 102.6 MiB (5.2%) command: firefox-esr pid: 5785 cpu: 0.2%
  4: mem: 49.3 MiB (2.5%) command: firefox-esr pid: 5834 cpu: 0.0%
  5: mem: 43.2 MiB (2.1%) command: xorg pid: 1706 cpu: 3.0%
Info:
  Processes: 139 Uptime: 51m wakeups: 0 Init: SysVinit v: 3.06 runlevel: 2 default: 2 tool: service
  Compilers: gcc: 12.2.0 alt: 12 Client: IceWM v: 3.4.5 inxi: 3.3.31  
caturen
Tenace Tecnocrate
Tenace Tecnocrate
Messaggi: 18107
Iscrizione: giovedì 8 aprile 2010, 18:41
Desktop: diversi
Distribuzione: debian

Re: Antix

Messaggio da caturen »

l'errore è chiaro: devi cambiare questo repository
Errore:3 http://it.mxrepo.com/antix/bookworm bookworm InRelease
che non è firmato ed usarne un altro
Scrivi risposta

Ritorna a “Altre distribuzioni e sistemi operativi”

Chi c’è in linea

Visualizzano questa sezione: 0 utenti iscritti e 2 ospiti