problema risoluzione video(risolto)

[gaino]

ciaoo dopo aver aggiornato ho come risoluzione massima 800x600 al posto di 1900xboh non ricordo ::) avrà scaricato qualche driver nvidia...ma quale? grazieeee

[gaino]

gaino@gaino:~$ cat /etc/X11/xorg.conf

Codice: Seleziona tutto

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder3)  Mon Feb 26 23:38:46 PST 2007

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
  Identifier "Default Layout"
  screen 0 "Default Screen" 0 0
  InputDevice "Generic Keyboard"
  InputDevice "Configured Mouse"
  InputDevice "stylus" "SendCoreEvents"
  InputDevice "cursor" "SendCoreEvents"
  InputDevice "eraser" "SendCoreEvents"
  InputDevice "Synaptics Touchpad"
EndSection

Section "Files"

  # path to defoma fonts
  FontPath "/usr/share/fonts/X11/misc"
  FontPath "/usr/share/fonts/X11/cyrillic"
  FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
  FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
  FontPath "/usr/share/fonts/X11/Type1"
  FontPath "/usr/share/fonts/X11/100dpi"
  FontPath "/usr/share/fonts/X11/75dpi"
  FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
  Load "i2c"
  Load "bitmap"
  Load "ddc"
  Load "extmod"
  Load "freetype"
  Load "int10"
  Load "vbe"
  load "glx"
  load "v4l"
EndSection

Section "InputDevice"
  Identifier "Generic Keyboard"
  Driver "kbd"
  option "CoreKeyboard"
  option "XkbRules" "xorg"
  option "XkbModel" "pc105"
  option "XkbLayout" "it"
  option "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
  Identifier "Configured Mouse"
  Driver "mouse"
  option "CorePointer"
  option "Device" "/dev/input/mice"
  option "Protocol" "ImPS/2"
  option "ZAxisMapping" "4 5"
  option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
  Identifier "Synaptics Touchpad"
  Driver "synaptics"
  option "SendCoreEvents" "true"
  option "Device" "/dev/psaux"
  option "Protocol" "auto-dev"
  option "HorizScrollDelta" "0"
EndSection

Section "InputDevice"

  # /dev/input/event
  # for USB
  Identifier "stylus"
  Driver "wacom"
  option "Device" "/dev/wacom"# Change to
  option "Type" "stylus"
  option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"

  # /dev/input/event
  # for USB
  Identifier "eraser"
  Driver "wacom"
  option "Device" "/dev/wacom"# Change to
  option "Type" "eraser"
  option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"

  # /dev/input/event
  # for USB
  Identifier "cursor"
  Driver "wacom"
  option "Device" "/dev/wacom"# Change to
  option "Type" "cursor"
  option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "Monitor"
  identifier "Generic Monitor"
  vendorname "Plug 'n' Play"
  modelname "Plug 'n' Play"
  modeline  "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
  gamma 1.0
EndSection

Section "Device"
  identifier "nVidia Corporation G72M [Quadro NVS 110M/GeForce Go 7300]"
  boardname "nv"
  busid "PCI:1:0:0"
  driver "nvidia"
  screen 0
EndSection

Section "Screen"
  Identifier "Default Screen"
  Device "nVidia Corporation G72M [Quadro NVS 110M/GeForce Go 7300]"
  Monitor "Generic Monitor"
  DefaultDepth 24
  SubSection "Display"
    depth 24
    virtual 640 480
    modes "640x480@60"
  EndSubSection
EndSection

Section "device" #
  identifier "device1"
  boardname "nv"
  busid "PCI:1:0:0"
  driver "nvidia"
  screen 1
EndSection
Section "screen" #
  identifier "screen1"
  device "device1"
  defaultdepth 24
  monitor "monitor1"
  SubSection "Display"
    depth 24
    modes "640x480@60"
  EndSubSection
EndSection
Section "monitor" #
  identifier "monitor1"
  vendorname "Plug 'n' Play"
  modelname "Plug 'n' Play"
  modeline  "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
  gamma 1.0
EndSection
Section "ServerFlags"
EndSection
gaino@gaino:~$

[Giooogle.tk]

Devi aggiungere la tua risoluzione (cerca di ricordarla..) nel file xorg.conf, nella sezione "Screen", alla voce "modes". Scrivi la tua risoluzione per ogni profondità di colore (nel tuo file mi pare ce ne sia una sola). In alternativa puoi configurare il file eseguendo:

Codice: Seleziona tutto

sudo dpkg-reconfigure xserver-xorg

e rispondendo alle domande.

Ps. la prossima volta ricordati di usare i tad # per inserire testi così lunghi...

[gaino]

grazieeee (good)

[Giooogle.tk]

Funziona? Metti un [Risolto] nel titolo del topic...  (b2b)

[gaino]

tutto ok (good)