problema porta amule
problema porta amule
CIAO a tutti io sono collegato a una rete wireless e ottengo un lowid credo sia a causa delle porta UDp e UTC poichè non più di una settimana fa avevo un ID alto. Di solito anche quando usavo windsoz per avere un id alto dovevo scegliere tra le porte 4000/1 5000/1 6000/1 ora provandole tutte e tre non ottengo nulla...cosa posso fare?
Re: problema porta amule
molto probabilmente è il firewall che ti blocca.
posta qui "sudo iptables -L", se ci entra :-)
posta qui "sudo iptables -L", se ci entra :-)
Hoc testudo docet!
-
saxtro
- Imperturbabile Insigne

- Messaggi: 2981
- Iscrizione: domenica 4 giugno 2006, 13:16
- Distribuzione: Kubuntu 20.04
Re: problema porta amule
potrebbe anche essere un problema di NAT dell' apparato wireless
Re: problema porta amule
però non il firewall...comunquemadebyn ha scritto: molto probabilmente è il firewall che ti blocca.
posta qui "sudo iptables -L", se ci entra :-)
Codice: Seleziona tutto
Chain INPUT (policy ACCEPT)
target prot opt source destination
Chain FORWARD (policy ACCEPT)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot opt source destinatioRe: problema porta amule
hai IP asegnato da dhcp e nn riservato??
magari il dhcp rinnovando il leasing dell'ip te l'ha cambiato! e quindi la porta è si mappata ma sul tuo vecchio ip....
magari il dhcp rinnovando il leasing dell'ip te l'ha cambiato! e quindi la porta è si mappata ma sul tuo vecchio ip....
Re: problema porta amule
Ho un problema molto simile, in pratica se ad aMule cambio il numero di porte da quello di default mi da sempre Id basso anche se ho aperto le porte sia sul firewall che sul router e questo mi succede anche se adopero emule con wine.Le porte che ho provato sia come TCP che come UDP sono : 1755, 7070,5060 ecc..... Vi posto il risultato del comando sudo iptables -L sperando che qualcuno mi possa aiutare. Logicamente le porte che ho provato con aMule su xp ,con eMule, vanno benissimo quindi penso che il router sia configurato a dovere. Caio.
Codice: Seleziona tutto
Chain INPUT (policy DROP)
target prot opt source destination
ACCEPT tcp -- RTA230.home anywhere tcp flags:!FIN,SYN,RST,ACK/SYN
ACCEPT udp -- RTA230.home anywhere
ACCEPT 0 -- anywhere anywhere
ACCEPT icmp -- anywhere anywhere limit: avg 10/sec burst 5
DROP 0 -- anywhere 255.255.255.255
DROP 0 -- anywhere 192.168.1.255
DROP 0 -- BASE-ADDRESS.MCAST.NET/8 anywhere
DROP 0 -- anywhere BASE/8
DROP 0 -- 255.255.255.255 anywhere
DROP 0 -- anywhere 0.0.0.0
DROP 0 -- anywhere anywhere state INVALID
LSI 0 -f anywhere anywhere limit: avg 10/min burst 5
INBOUND 0 -- anywhere anywhere
LOG_FILTER 0 -- anywhere anywhere
LOG 0 -- anywhere anywhere LOG level info prefix `Unknown Input'
Chain FORWARD (policy DROP)
target prot opt source destination
ACCEPT icmp -- anywhere anywhere limit: avg 10/sec burst 5
LOG_FILTER 0 -- anywhere anywhere
LOG 0 -- anywhere anywhere LOG level info prefix `Unknown Forward'
Chain OUTPUT (policy DROP)
target prot opt source destination
ACCEPT tcp -- 192.168.1.2 RTA230.home tcp dpt:domain
ACCEPT udp -- 192.168.1.2 RTA230.home udp dpt:domain
ACCEPT 0 -- anywhere anywhere
DROP 0 -- BASE/8 anywhere
DROP 0 -- anywhere BASE/8
DROP 0 -- 255.255.255.255 anywhere
DROP 0 -- anywhere 0.0.0.0
DROP 0 -- anywhere anywhere state INVALID
OUTBOUND 0 -- anywhere anywhere
LOG_FILTER 0 -- anywhere anywhere
LOG 0 -- anywhere anywhere LOG level info prefix `Unknown Output'
Chain INBOUND (1 references)
target prot opt source destination
ACCEPT tcp -- anywhere anywhere state RELATED,ESTABLISHED
ACCEPT udp -- anywhere anywhere state RELATED,ESTABLISHED
ACCEPT tcp -- anywhere anywhere tcp dpt:7070
ACCEPT udp -- anywhere anywhere udp dpt:7070
ACCEPT tcp -- anywhere anywhere tcp dpts:6881:6889
ACCEPT udp -- anywhere anywhere udp dpts:6881:6889
ACCEPT tcp -- anywhere anywhere tcp dpt:6969
ACCEPT udp -- anywhere anywhere udp dpt:6969
ACCEPT tcp -- anywhere anywhere tcp dpt:1755
ACCEPT udp -- anywhere anywhere udp dpt:1755
ACCEPT tcp -- anywhere anywhere tcp dpt:sip
ACCEPT udp -- anywhere anywhere udp dpt:sip
ACCEPT tcp -- anywhere anywhere tcp dpt:sip-tls
ACCEPT udp -- anywhere anywhere udp dpt:sip-tls
ACCEPT tcp -- anywhere anywhere tcp dpt:4662
ACCEPT udp -- anywhere anywhere udp dpt:4662
ACCEPT tcp -- anywhere anywhere tcp dpt:4672
ACCEPT udp -- anywhere anywhere udp dpt:4672
LSI 0 -- anywhere anywhere
Chain LOG_FILTER (5 references)
target prot opt source destination
Chain LSI (2 references)
target prot opt source destination
LOG_FILTER 0 -- anywhere anywhere
LOG tcp -- anywhere anywhere tcp flags:FIN,SYN,RST,ACK/SYN limit: avg 1/sec burst 5 LOG level info prefix `Inbound '
DROP tcp -- anywhere anywhere tcp flags:FIN,SYN,RST,ACK/SYN
LOG tcp -- anywhere anywhere tcp flags:FIN,SYN,RST,ACK/RST limit: avg 1/sec burst 5 LOG level info prefix `Inbound '
DROP tcp -- anywhere anywhere tcp flags:FIN,SYN,RST,ACK/RST
LOG icmp -- anywhere anywhere icmp echo-request limit: avg 1/sec burst 5 LOG level info prefix `Inbound '
DROP icmp -- anywhere anywhere icmp echo-request
LOG 0 -- anywhere anywhere limit: avg 5/sec burst 5 LOG level info prefix `Inbound '
DROP 0 -- anywhere anywhere
Chain LSO (0 references)
target prot opt source destination
LOG_FILTER 0 -- anywhere anywhere
LOG 0 -- anywhere anywhere limit: avg 5/sec burst 5 LOG level info prefix `Outbound '
REJECT 0 -- anywhere anywhere reject-with icmp-port-unreachable
Chain OUTBOUND (1 references)
target prot opt source destination
ACCEPT icmp -- anywhere anywhere
ACCEPT tcp -- anywhere anywhere state RELATED,ESTABLISHED
ACCEPT udp -- anywhere anywhere state RELATED,ESTABLISHED
ACCEPT 0 -- anywhere anywhere
Ultima modifica di whyle il giovedì 10 maggio 2007, 17:33, modificato 1 volta in totale.
Re: problema porta amule
sì se non capisco male ciò che dici il mio IP cambia ogni volta che riavvio il router ma le porte dovrei poterle scegliere tra le 3 che ti dicevo prima...almeno fino a una settimana fa succedeva così...sandvik86 ha scritto: hai IP asegnato da dhcp e nn riservato??
magari il dhcp rinnovando il leasing dell'ip te l'ha cambiato! e quindi la porta è si mappata ma sul tuo vecchio ip....
Re: problema porta amule
boh adesso funzione...le ho ricambiate e ora fva...cavolo 2 secondo dopo aver avuto l'IP alto stavo già scaricando a 50kb con IP basso dopo una notte ero ancora a 0
Chi c’è in linea
Visualizzano questa sezione: 0 utenti iscritti e 2 ospiti
