Connessione UMTS su per 3 secondi

[cingo_5]

Ciao a tutti, ho voluto tentare di utilizzare un vecchio LG U8110, della 3, per navigare tramite UMTS...
ho cercato un pò in giro per vedere come stabilire la connessione e ho trovato questa guida:

http://3v1n0.tuxfamily.org/blog/informa ... pitolo%203

qui si parla della connessione con tim ma per 3 basta cambiare

Codice: Seleziona tutto

AT+cgdcont=,"ip","ibox.tim.it"

con

Codice: Seleziona tutto

AT+cgdcont=,"ip","naviga.tim.it"

il "modem" è rilevato come ttyACM0/1

comunque la connessione parte mi dice che si collega, mi da la schermatina con la durata e dopo qualche secondo, dal terminale dove ho lanciato gnome-ppp esce questo

Codice: Seleziona tutto

GNOME PPP: Connessione...
GNOME PPP: STDERR: --> Ignoring malformed input line: ";Do NOT edit this file by hand!"
GNOME PPP: STDERR: --> WvDial: Internet dialer version 1.56
GNOME PPP: STDERR: --> Cannot get information for serial port.
GNOME PPP: STDERR: --> Initializing modem.
GNOME PPP: STDERR: --> Sending: ATZ
GNOME PPP: STDERR: ATZ
GNOME PPP: STDERR: OK
GNOME PPP: STDERR: --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
GNOME PPP: STDERR: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
GNOME PPP: STDERR: OK
GNOME PPP: STDERR: --> Modem initialized.
GNOME PPP: STDERR: --> Sending: ATM1L3DT*99***2#
GNOME PPP: STDERR: --> Waiting for carrier.
GNOME PPP: STDERR: ATM1L3DT*99***2#
GNOME PPP: STDERR: CONNECT
GNOME PPP: STDERR: ~[7f]}#@!}!}!} }8}#}$@#}(}"}'}"}"}&} } } } }%}&5D}67sB~
GNOME PPP: STDERR: --> Carrier detected.  Waiting for prompt.
GNOME PPP: STDERR: ~[7f]}#@!}!}"} }8}#}$@#}(}"}'}"}"}&} } } } }%}&5D}679P~
GNOME PPP: STDERR: --> PPP negotiation detected.
GNOME PPP: STDERR: --> Starting pppd at Fri Jun  1 11:20:27 2007
GNOME PPP: STDERR: --> Pid of pppd: 7723
GNOME PPP: STDERR: --> Using interface ppp0
GNOME PPP: STDERR: --> pppd: �[05][06][08]X[05][06][08]x[05][06][08]p"[06][08]P�[05][08]p�[05][08]��[05][08]

(gnome-ppp:7681): Gtk-CRITICAL **: gtk_text_buffer_emit_insert: assertion `g_utf8_validate (text, len, NULL)' failed
GNOME PPP: STDERR: --> pppd: �[05][06][08]X[05][06][08]x[05][06][08]p"[06][08]P�[05][08]p�[05][08]��[05][08]

(gnome-ppp:7681): Gtk-CRITICAL **: gtk_text_buffer_emit_insert: assertion `g_utf8_validate (text, len, NULL)' failed
GNOME PPP: STDERR: --> pppd: �[05][06][08]X[05][06][08]x[05][06][08]p"[06][08]P�[05][08]p�[05][08]��[05][08]

(gnome-ppp:7681): Gtk-CRITICAL **: gtk_text_buffer_emit_insert: assertion `g_utf8_validate (text, len, NULL)' failed
GNOME PPP: STDERR: --> pppd: �[05][06][08]X[05][06][08]x[05][06][08]p"[06][08]P�[05][08]p�[05][08]��[05][08]

(gnome-ppp:7681): Gtk-CRITICAL **: gtk_text_buffer_emit_insert: assertion `g_utf8_validate (text, len, NULL)' failed
GNOME PPP: STDERR: --> pppd: �[05][06][08]X[05][06][08]x[05][06][08]p"[06][08]P�[05][08]p�[05][08]��[05][08]

(gnome-ppp:7681): Gtk-CRITICAL **: gtk_text_buffer_emit_insert: assertion `g_utf8_validate (text, len, NULL)' failed
GNOME PPP: STDERR: --> pppd: �[05][06][08]X[05][06][08]x[05][06][08]p"[06][08]P�[05][08]p�[05][08]��[05][08]

(gnome-ppp:7681): Gtk-CRITICAL **: gtk_text_buffer_emit_insert: assertion `g_utf8_validate (text, len, NULL)' failed
GNOME PPP: STDERR: --> pppd: �[05][06][08]X[05][06][08]x[05][06][08]p"[06][08]P�[05][08]p�[05][08]��[05][08]

(gnome-ppp:7681): Gtk-CRITICAL **: gtk_text_buffer_emit_insert: assertion `g_utf8_validate (text, len, NULL)' failed
GNOME PPP: STDERR: --> Disconnecting at Fri Jun  1 11:20:29 2007
GNOME PPP: STDERR: --> The PPP daemon has died: A modem hung up the phone (exit code = 16)
GNOME PPP: STDERR: --> man pppd explains pppd error codes in more detail.
GNOME PPP: STDERR: --> Try again and look into /var/log/messages and the wvdial and pppd man pages for more information.

dopo questo si scollega e gnome-ppp si chiude...
andando a leggere /var/log/messages l'unica cosa riferita al modem è questa:

Codice: Seleziona tutto

jun  1 11:10:14 gnote pppd[7512]: Using interface ppp0

Jun  1 11:10:14 gnote pppd[7512]: Connect: ppp0 <--> /dev/ttyACM0
Jun  1 11:10:14 gnote pppd[7512]: CHAP authentication succeeded: Congratulations!
Jun  1 11:10:14 gnote pppd[7512]: CHAP authentication succeeded
Jun  1 11:10:16 gnote pppd[7512]: LCP terminated by peer
Jun  1 11:10:16 gnote pppd[7512]: Modem hangup
Jun  1 11:10:16 gnote pppd[7512]: Connection terminated.
Jun  1 11:10:17 gnote pppd[7512]: Exit.
Jun  1 11:20:27 gnote pppd[7723]: pppd 2.4.4 started by root, uid 0
Jun  1 11:20:27 gnote pppd[7723]: Using interface ppp0
Jun  1 11:20:27 gnote pppd[7723]: Connect: ppp0 <--> /dev/ttyACM0
Jun  1 11:20:27 gnote pppd[7723]: Remote message: Congratulations!
Jun  1 11:20:27 gnote pppd[7723]: PAP authentication succeeded
Jun  1 11:20:28 gnote pppd[7723]: LCP terminated by peer
Jun  1 11:20:29 gnote pppd[7723]: Modem hangup
Jun  1 11:20:29 gnote pppd[7723]: Connection terminated.
Jun  1 11:20:29 gnote pppd[7723]: Exit.

sto continuando a cercare qualcuno che a avuto un problema simile ma ancora nulla... confido in voi   
Grazie! 

[PiDy]

Attenzione:

Codice: Seleziona tutto

AT+cgdcont=,"ip","naviga.tim.it"

questo è sbagliato , l'APN di accesso alla rete di 3 è:

Codice: Seleziona tutto

AT+cgdcont=,"ip","tre.it"

nel caso di normale connessione senza particolari offerte,

mentre questo:

Codice: Seleziona tutto

AT+cgdcont=,"ip","naviga.tre.it"

è l'Access Point nel caso in cui tu abbia attivato l'opzione Naviga3 (ti permette di scambiare dati per un totale di 50MB al giorno al costo di 9euro al mese).

Ora non so se sia questo il tuo problema, ma intanto cominciamo a sistemare dall'inizio.

[Shaved]

Mi associo a PiDy per farti notare un'altra "stranezza": stai seguendo una guida per configurare il cellulare tramite bluetooth, ma l'LG U8110 non ha il bluetooth.

Hai sbagliato ad indicarci il modello?

Se usi il cavetto segui questa guida: http://wiki.ubuntu-it.org/Hardware/Mode ... prsUmtsUsb

[cingo_5]

Per PiDy: Grazie! più tardi provo come hai detto tu, 
Per Shaved: la guida parla di bluetooth ma l'ho collegato tramite usb e infatti il dispositivo è visto come /dev/ttyACM0 

Grazie ragazzi!

[cingo_5]

Ho provato a cambiare i parametri come ha detti PiDy ma non è cambiato nulla, provo dare un'occhiata alla guida postata da Shaved...

[spedan1]

prova questa guida:
http://linuxiano.wordpress.com/2007/02/28/ubuntu-e-connessione-a-internet-mediante-cellulare/

[cingo_5]

riprendo il discorso dopo quasi 2 mesi, scusate, ma le "ferie" si avvicininano e per lavoro devo avere la "reperibilità" (maledetta >:( ) e una connessione umts farebbe molto comodo...

allora... ho fatto un pò di prove di recente, però senza risultati,
ripeto i passi:
ho installato gnome-ppp e ho seguito la guida:

http://wiki.ubuntu-it.org/Hardware/Mode ... prsUmtsUsb

fin qui va bene... si collega... appaiono i computerini in alto... e poi si sconnette  >:(

il log recita  così:

Codice: Seleziona tutto

--> Disconnecting at Tue Jul 31 21:29:00 2007
--> The PPP daemon has died: A modem hung up the phone (exit code = 16)
--> man pppd explains pppd error codes in more detail.
--> Try again and look into /var/log/messages and the wvdial and pppd man pages for more information.

cerco su google questo errore... e in pratica succede così perchè mi scollegano "dall'altra parte"... (anche se mi pare strano)
però questo accade sempre, e comunque in posti differenti e distanti  :'(

qualche aiuto? qualche idea?  :'(

[Shaved]

Forse dico una banalità: la scheda ha credito residuo a sufficienza? Non conosco le offerte e le procedure della 3, ma potrebbe dipendere da alcuni limiti contrattuali dell'offerta.

Eventualmente, quando ti capita di disconneterti, guarda nel file /var/log/messages cosa è segnalato e riportalo in un post.

Un'ultima cosa. A volte si ottengono migliori risultati disabilitando eventuali connessioni ethernet e wireless; lo puoi fare agendo sul network manager, (la piccola icona bianca vicino all'orologio).

[TheKing]

io ho pure gli stessi problemi, però uso il bluetooth, questo è il messages:

Codice: Seleziona tutto

Aug  5 01:13:33 user-computer syslogd 1.4.1#20ubuntu4: restart.
Aug  5 01:13:33 user-computer kernel: Inspecting /boot/System.map-2.6.20-16-generic
Aug  5 01:13:33 user-computer kernel: Loaded 24977 symbols from /boot/System.map-2.6.20-16-generic.
Aug  5 01:13:33 user-computer kernel: Symbols match kernel version 2.6.20.
Aug  5 01:13:33 user-computer kernel: No module symbols loaded - kernel modules not enabled. 
Aug  5 01:13:33 user-computer kernel: [    0.000000] Linux version 2.6.20-16-generic (root@terranova) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Thu Jun 7 20:19:32 UTC 2007 (Ubuntu 2.6.20-16.29-generic)
Aug  5 01:13:33 user-computer kernel: [    0.000000] BIOS-provided physical RAM map:
Aug  5 01:13:33 user-computer kernel: [    0.000000] sanitize start
Aug  5 01:13:33 user-computer kernel: [    0.000000] sanitize end
Aug  5 01:13:33 user-computer kernel: [    0.000000] copy_e820_map() start: 0000000000000000 size: 00000000000a0000 end: 00000000000a0000 type: 1
Aug  5 01:13:33 user-computer kernel: [    0.000000] copy_e820_map() type is E820_RAM
Aug  5 01:13:33 user-computer kernel: [    0.000000] copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
Aug  5 01:13:33 user-computer kernel: [    0.000000] copy_e820_map() start: 0000000000100000 size: 000000000fef0000 end: 000000000fff0000 type: 1
Aug  5 01:13:33 user-computer kernel: [    0.000000] copy_e820_map() type is E820_RAM
Aug  5 01:13:33 user-computer kernel: [    0.000000] copy_e820_map() start: 000000000fff0000 size: 0000000000003000 end: 000000000fff3000 type: 4
Aug  5 01:13:33 user-computer kernel: [    0.000000] copy_e820_map() start: 000000000fff3000 size: 000000000000d000 end: 0000000010000000 type: 3
Aug  5 01:13:33 user-computer kernel: [    0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2
Aug  5 01:13:33 user-computer kernel: [    0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
Aug  5 01:13:33 user-computer kernel: [    0.000000] copy_e820_map() start: 00000000ffb00000 size: 0000000000500000 end: 0000000100000000 type: 2
Aug  5 01:13:33 user-computer kernel: [    0.000000]  BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
Aug  5 01:13:33 user-computer kernel: [    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Aug  5 01:13:33 user-computer kernel: [    0.000000]  BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
Aug  5 01:13:33 user-computer kernel: [    0.000000]  BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
Aug  5 01:13:33 user-computer kernel: [    0.000000]  BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
Aug  5 01:13:33 user-computer kernel: [    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Aug  5 01:13:33 user-computer kernel: [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Aug  5 01:13:33 user-computer kernel: [    0.000000]  BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
Aug  5 01:13:33 user-computer kernel: [    0.000000] 0MB HIGHMEM available.
Aug  5 01:13:33 user-computer kernel: [    0.000000] 255MB LOWMEM available.
Aug  5 01:13:33 user-computer kernel: [    0.000000] Zone PFN ranges:
Aug  5 01:13:33 user-computer kernel: [    0.000000]   DMA             0 ->     4096
Aug  5 01:13:33 user-computer kernel: [    0.000000]   Normal       4096 ->    65520
Aug  5 01:13:33 user-computer kernel: [    0.000000]   HighMem     65520 ->    65520
Aug  5 01:13:33 user-computer kernel: [    0.000000] early_node_map[1] active PFN ranges
Aug  5 01:13:33 user-computer kernel: [    0.000000]     0:        0 ->    65520
Aug  5 01:13:33 user-computer kernel: [    0.000000] DMI 2.2 present.
Aug  5 01:13:33 user-computer kernel: [    0.000000] ACPI: PM-Timer IO Port: 0x4008
Aug  5 01:13:33 user-computer kernel: [    0.000000] Allocating PCI resources starting at 20000000 (gap: 10000000:eec00000)
Aug  5 01:13:33 user-computer kernel: [    0.000000] Detected 2000.009 MHz processor.
Aug  5 01:13:33 user-computer kernel: [   19.072098] Built 1 zonelists.  Total pages: 65009
Aug  5 01:13:33 user-computer kernel: [   19.072107] Kernel command line: root=UUID=44179f72-6552-49a9-b928-f6b4f06cfeb9 ro quiet splash
Aug  5 01:13:33 user-computer kernel: [   19.072329] Found and enabled local APIC!
Aug  5 01:13:33 user-computer kernel: [   19.072339] Enabling fast FPU save and restore... done.
Aug  5 01:13:33 user-computer kernel: [   19.072345] Enabling unmasked SIMD FPU exception support... done.
Aug  5 01:13:33 user-computer kernel: [   19.072362] Initializing CPU#0
Aug  5 01:13:33 user-computer kernel: [   19.072493] PID hash table entries: 1024 (order: 10, 4096 bytes)
Aug  5 01:13:33 user-computer kernel: [   19.074043] Console: colour VGA+ 80x25
Aug  5 01:13:33 user-computer kernel: [   19.074330] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Aug  5 01:13:33 user-computer kernel: [   19.074663] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Aug  5 01:13:33 user-computer kernel: [   19.083168] Memory: 248892k/262080k available (1992k kernel code, 12720k reserved, 900k data, 328k init, 0k highmem)
Aug  5 01:13:33 user-computer kernel: [   19.083183] virtual kernel memory layout:
Aug  5 01:13:33 user-computer kernel: [   19.083184]     fixmap  : 0xfff4e000 - 0xfffff000   ( 708 kB)
Aug  5 01:13:33 user-computer kernel: [   19.083186]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
Aug  5 01:13:33 user-computer kernel: [   19.083187]     vmalloc : 0xd0800000 - 0xff7fe000   ( 751 MB)
Aug  5 01:13:33 user-computer kernel: [   19.083189]     lowmem  : 0xc0000000 - 0xcfff0000   ( 255 MB)
Aug  5 01:13:33 user-computer kernel: [   19.083190]       .init : 0xc03d9000 - 0xc042b000   ( 328 kB)
Aug  5 01:13:33 user-computer kernel: [   19.083191]       .data : 0xc02f2374 - 0xc03d36d4   ( 900 kB)
Aug  5 01:13:33 user-computer kernel: [   19.083193]       .text : 0xc0100000 - 0xc02f2374   (1992 kB)
Aug  5 01:13:33 user-computer kernel: [   19.083197] Checking if this processor honours the WP bit even in supervisor mode... Ok.
Aug  5 01:13:33 user-computer kernel: [   19.160330] Calibrating delay using timer specific routine.. 4003.92 BogoMIPS (lpj=8007855)
Aug  5 01:13:33 user-computer kernel: [   19.160410] Security Framework v1.0.0 initialized
Aug  5 01:13:33 user-computer kernel: [   19.160423] SELinux:  Disabled at boot.
Aug  5 01:13:33 user-computer kernel: [   19.160458] Mount-cache hash table entries: 512
Aug  5 01:13:33 user-computer kernel: [   19.160782] CPU: Trace cache: 12K uops, L1 D cache: 8K
Aug  5 01:13:33 user-computer kernel: [   19.160786] CPU: L2 cache: 128K
Aug  5 01:13:33 user-computer kernel: [   19.160790] CPU: Hyper-Threading is disabled
Aug  5 01:13:33 user-computer kernel: [   19.160814] Compat vDSO mapped to ffffe000.
Aug  5 01:13:33 user-computer kernel: [   19.160820] Remapping vsyscall page to ffffe000
Aug  5 01:13:33 user-computer kernel: [   19.160842] Checking 'hlt' instruction... OK.
Aug  5 01:13:33 user-computer kernel: [   19.176492] SMP alternatives: switching to UP code
Aug  5 01:13:33 user-computer kernel: [   19.177072] Freeing SMP alternatives: 11k freed
Aug  5 01:13:33 user-computer kernel: [   19.177497] Early unpacking initramfs... done
Aug  5 01:13:33 user-computer kernel: [   19.606943] ACPI: Core revision 20060707
Aug  5 01:13:33 user-computer kernel: [   19.613089] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
Aug  5 01:13:33 user-computer kernel: [   19.615217] ACPI: setting ELCR to 0200 (from 1c20)
Aug  5 01:13:33 user-computer kernel: [   19.665918] CPU0: Intel(R) Celeron(R) CPU 2.00GHz stepping 07
Aug  5 01:13:33 user-computer kernel: [   19.665928] SMP motherboard not detected.
Aug  5 01:13:33 user-computer kernel: [   19.771250] Brought up 1 CPUs
Aug  5 01:13:33 user-computer kernel: [   19.771714] Booting paravirtualized kernel on bare hardware
Aug  5 01:13:33 user-computer kernel: [   19.771919] Time: 23:13:01  Date: 07/04/107
Aug  5 01:13:33 user-computer kernel: [   19.771990] NET: Registered protocol family 16
Aug  5 01:13:33 user-computer kernel: [   19.772281] EISA bus registered
Aug  5 01:13:33 user-computer kernel: [   19.772299] ACPI: bus type pci registered
Aug  5 01:13:33 user-computer kernel: [   19.798051] PCI: PCI BIOS revision 2.10 entry at 0xfb190, last bus=2
Aug  5 01:13:33 user-computer kernel: [   19.798054] PCI: Using configuration type 1
Aug  5 01:13:33 user-computer kernel: [   19.798058] Setting up standard PCI resources
Aug  5 01:13:33 user-computer kernel: [   19.811351] ACPI: Interpreter enabled
Aug  5 01:13:33 user-computer kernel: [   19.811362] ACPI: Using PIC for interrupt routing
Aug  5 01:13:33 user-computer kernel: [   19.813402] ACPI: PCI Root Bridge [PCI0] (0000:00)
Aug  5 01:13:33 user-computer kernel: [   19.814168] PCI quirk: region 4000-407f claimed by ICH4 ACPI/GPIO/TCO
Aug  5 01:13:33 user-computer kernel: [   19.814176] PCI quirk: region 4080-40bf claimed by ICH4 GPIO
Aug  5 01:13:33 user-computer kernel: [   19.814995] PCI: Transparent bridge - 0000:00:1e.0
Aug  5 01:13:33 user-computer kernel: [   19.846284] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
Aug  5 01:13:33 user-computer kernel: [   19.846910] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
Aug  5 01:13:33 user-computer kernel: [   19.847561] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Aug  5 01:13:33 user-computer kernel: [   19.848145] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Aug  5 01:13:33 user-computer kernel: [   19.848737] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Aug  5 01:13:33 user-computer kernel: [   19.849343] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Aug  5 01:13:33 user-computer kernel: [   19.849947] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Aug  5 01:13:33 user-computer kernel: [   19.850539] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
Aug  5 01:13:33 user-computer kernel: [   19.856887] Linux Plug and Play Support v0.97 (c) Adam Belay
Aug  5 01:13:33 user-computer kernel: [   19.856940] pnp: PnP ACPI init
Aug  5 01:13:33 user-computer kernel: [   19.865629] pnp: PnP ACPI: found 14 devices
Aug  5 01:13:33 user-computer kernel: [   19.865643] PnPBIOS: Disabled by ACPI PNP
Aug  5 01:13:33 user-computer kernel: [   19.865822] PCI: Using ACPI for IRQ routing
Aug  5 01:13:33 user-computer kernel: [   19.865831] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Aug  5 01:13:33 user-computer kernel: [   19.879400] NET: Registered protocol family 8
Aug  5 01:13:33 user-computer kernel: [   19.879405] NET: Registered protocol family 20
Aug  5 01:13:33 user-computer kernel: [   19.880181] pnp: 00:02: ioport range 0x4000-0x40f7 could not be reserved
Aug  5 01:13:33 user-computer kernel: [   19.881530] PCI: Bridge: 0000:00:01.0
Aug  5 01:13:33 user-computer kernel: [   19.881535]   IO window: disabled.
Aug  5 01:13:33 user-computer kernel: [   19.881542]   MEM window: e6000000-e7ffffff
Aug  5 01:13:33 user-computer kernel: [   19.881548]   PREFETCH window: e4000000-e5ffffff
Aug  5 01:13:33 user-computer kernel: [   19.881556] PCI: Bridge: 0000:00:1e.0
Aug  5 01:13:33 user-computer kernel: [   19.881561]   IO window: c000-cfff
Aug  5 01:13:33 user-computer kernel: [   19.881568]   MEM window: e8000000-e9ffffff
Aug  5 01:13:33 user-computer kernel: [   19.881574]   PREFETCH window: 20000000-200fffff
Aug  5 01:13:33 user-computer kernel: [   19.881669] NET: Registered protocol family 2
Aug  5 01:13:33 user-computer kernel: [   19.919048] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
Aug  5 01:13:33 user-computer kernel: [   19.919269] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
Aug  5 01:13:33 user-computer kernel: [   19.919375] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
Aug  5 01:13:33 user-computer kernel: [   19.919424] TCP: Hash tables configured (established 8192 bind 4096)
Aug  5 01:13:33 user-computer kernel: [   19.919429] TCP reno registered
Aug  5 01:13:33 user-computer kernel: [   19.931112] checking if image is initramfs... it is
Aug  5 01:13:33 user-computer kernel: [   20.755005] Freeing initrd memory: 6769k freed
Aug  5 01:13:33 user-computer kernel: [   20.756283] audit: initializing netlink socket (disabled)
Aug  5 01:13:33 user-computer kernel: [   20.756315] audit(1186269182.720:1): initialized
Aug  5 01:13:33 user-computer kernel: [   20.756723] VFS: Disk quotas dquot_6.5.1
Aug  5 01:13:33 user-computer kernel: [   20.756776] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Aug  5 01:13:33 user-computer kernel: [   20.756916] io scheduler noop registered
Aug  5 01:13:33 user-computer kernel: [   20.756922] io scheduler anticipatory registered
Aug  5 01:13:33 user-computer kernel: [   20.756926] io scheduler deadline registered
Aug  5 01:13:33 user-computer kernel: [   20.756962] io scheduler cfq registered (default)
Aug  5 01:13:33 user-computer kernel: [   20.757705] isapnp: Scanning for PnP cards...
Aug  5 01:13:33 user-computer kernel: [   21.111353] isapnp: No Plug & Play device found
Aug  5 01:13:33 user-computer kernel: [   21.292698] Real Time Clock Driver v1.12ac
Aug  5 01:13:33 user-computer kernel: [   21.292877] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Aug  5 01:13:33 user-computer kernel: [   21.293125] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Aug  5 01:13:33 user-computer kernel: [   21.293735] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Aug  5 01:13:33 user-computer kernel: [   21.296099] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Aug  5 01:13:33 user-computer kernel: [   21.297096] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Aug  5 01:13:33 user-computer kernel: [   21.298113] mice: PS/2 mouse device common for all mice
Aug  5 01:13:33 user-computer kernel: [   21.300525] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
Aug  5 01:13:33 user-computer kernel: [   21.300988] input: Macintosh mouse button emulation as /class/input/input0
Aug  5 01:13:33 user-computer kernel: [   21.301132] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Aug  5 01:13:33 user-computer kernel: [   21.301141] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Aug  5 01:13:33 user-computer kernel: [   21.301714] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
Aug  5 01:13:33 user-computer kernel: [   21.301720] PNP: PS/2 controller doesn't have AUX irq; using default 12
Aug  5 01:13:33 user-computer kernel: [   21.556022] serio: i8042 KBD port at 0x60,0x64 irq 1
Aug  5 01:13:33 user-computer kernel: [   21.556508] EISA: Probing bus 0 at eisa.0
Aug  5 01:13:33 user-computer kernel: [   21.556543] Cannot allocate resource for EISA slot 4
Aug  5 01:13:33 user-computer kernel: [   21.556546] Cannot allocate resource for EISA slot 5
Aug  5 01:13:33 user-computer kernel: [   21.556560] EISA: Detected 0 cards.
Aug  5 01:13:33 user-computer kernel: [   21.586681] TCP cubic registered
Aug  5 01:13:33 user-computer kernel: [   21.586709] NET: Registered protocol family 1
Aug  5 01:13:33 user-computer kernel: [   21.586956] Testing NMI watchdog ... OK.
Aug  5 01:13:33 user-computer kernel: [   21.626616] Using IPI No-Shortcut mode
Aug  5 01:13:33 user-computer kernel: [   21.626816] ACPI: (supports S0 S1 S4 S5)
Aug  5 01:13:33 user-computer kernel: [   21.626904]   Magic number: 3:919:250
Aug  5 01:13:33 user-computer kernel: [   21.626967]   hash matches device ttyw6
Aug  5 01:13:33 user-computer kernel: [   21.627579] Time: tsc clocksource has been installed.
Aug  5 01:13:33 user-computer kernel: [   21.627971] Freeing unused kernel memory: 328k freed
Aug  5 01:13:33 user-computer kernel: [   21.642276] input: AT Translated Set 2 keyboard as /class/input/input1
Aug  5 01:13:33 user-computer kernel: [   23.207098] Capability LSM initialized
Aug  5 01:13:33 user-computer kernel: [   23.304176] ACPI: Fan [FAN] (on)
Aug  5 01:13:33 user-computer kernel: [   23.312299] ACPI: CPU0 (power states: C1[C1] C2[C2])
Aug  5 01:13:33 user-computer kernel: [   23.312333] ACPI: Processor [CPU0] (supports 2 throttling states)
Aug  5 01:13:33 user-computer kernel: [   23.315298] ACPI: Thermal Zone [THRM] (19 C)
Aug  5 01:13:33 user-computer kernel: [   24.718134] SCSI subsystem initialized
Aug  5 01:13:33 user-computer kernel: [   24.734604] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001f000 irq 14
Aug  5 01:13:33 user-computer kernel: [   24.734688] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001f008 irq 15
Aug  5 01:13:33 user-computer kernel: [   24.734730] scsi0 : ata_piix
Aug  5 01:13:33 user-computer kernel: [   24.750113] usbcore: registered new interface driver usbfs
Aug  5 01:13:33 user-computer kernel: [   24.750177] usbcore: registered new interface driver hub
Aug  5 01:13:33 user-computer kernel: [   24.750273] usbcore: registered new device driver usb
Aug  5 01:13:33 user-computer kernel: [   24.752006] USB Universal Host Controller Interface driver v3.0
Aug  5 01:13:33 user-computer kernel: [   24.979884] Floppy drive(s): fd0 is 1.44M
Aug  5 01:13:33 user-computer kernel: [   25.048055] FDC 0 is a post-1991 82077
Aug  5 01:13:33 user-computer kernel: [    5.940000] Time: acpi_pm clocksource has been installed.
Aug  5 01:13:33 user-computer kernel: [    6.016000] ata1.00: ATAPI, max UDMA/33
Aug  5 01:13:33 user-computer kernel: [    6.016000] ata1.01: ATAPI, max MWDMA2
Aug  5 01:13:33 user-computer kernel: [    6.180000] ata1.00: configured for UDMA/33
Aug  5 01:13:33 user-computer kernel: [    6.344000] ata1.01: configured for MWDMA2
Aug  5 01:13:33 user-computer kernel: [    6.344000] scsi1 : ata_piix
Aug  5 01:13:33 user-computer kernel: [    6.508000] ata2.00: ata_hpa_resize 1: sectors = 160086528, hpa_sectors = 160086528
Aug  5 01:13:33 user-computer kernel: [    6.508000] ata2.00: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133
Aug  5 01:13:33 user-computer kernel: [    6.508000] ata2.00: 160086528 sectors, multi 16: LBA 
Aug  5 01:13:33 user-computer kernel: [    6.520000] ata2.00: ata_hpa_resize 1: sectors = 160086528, hpa_sectors = 160086528
Aug  5 01:13:33 user-computer kernel: [    6.520000] ata2.00: configured for UDMA/100
Aug  5 01:13:33 user-computer kernel: [    6.520000] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVD-ROM GDR8164B 0L06 PQ: 0 ANSI: 5
Aug  5 01:13:33 user-computer kernel: [    6.524000] scsi 0:0:1:0: CD-ROM            HL-DT-ST CD-ROM GCR-8520B 1.00 PQ: 0 ANSI: 5
Aug  5 01:13:33 user-computer kernel: [    6.524000] scsi 1:0:0:0: Direct-Access     ATA      Maxtor 6Y080L0   YAR4 PQ: 0 ANSI: 5
Aug  5 01:13:33 user-computer kernel: [    6.532000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
Aug  5 01:13:33 user-computer kernel: [    6.532000] ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
Aug  5 01:13:33 user-computer kernel: [    6.532000] uhci_hcd 0000:00:1f.2: UHCI Host Controller
Aug  5 01:13:33 user-computer kernel: [    6.532000] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
Aug  5 01:13:33 user-computer kernel: [    6.532000] uhci_hcd 0000:00:1f.2: irq 11, io base 0x0000d000
Aug  5 01:13:33 user-computer kernel: [    6.536000] usb usb1: configuration #1 chosen from 1 choice
Aug  5 01:13:33 user-computer kernel: [    6.536000] hub 1-0:1.0: USB hub found
Aug  5 01:13:33 user-computer kernel: [    6.536000] hub 1-0:1.0: 2 ports detected
Aug  5 01:13:33 user-computer kernel: [    6.592000] sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
Aug  5 01:13:33 user-computer kernel: [    6.592000] Uniform CD-ROM driver Revision: 3.20
Aug  5 01:13:33 user-computer kernel: [    6.596000] sr1: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
Aug  5 01:13:33 user-computer kernel: [    6.604000] sr 0:0:0:0: Attached scsi generic sg0 type 5
Aug  5 01:13:33 user-computer kernel: [    6.604000] sr 0:0:1:0: Attached scsi generic sg1 type 5
Aug  5 01:13:33 user-computer kernel: [    6.604000] scsi 1:0:0:0: Attached scsi generic sg2 type 0
Aug  5 01:13:33 user-computer kernel: [    6.616000] SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB)
Aug  5 01:13:33 user-computer kernel: [    6.616000] sda: Write Protect is off
Aug  5 01:13:33 user-computer kernel: [    6.624000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug  5 01:13:33 user-computer kernel: [    6.628000] SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB)
Aug  5 01:13:33 user-computer kernel: [    6.628000] sda: Write Protect is off
Aug  5 01:13:33 user-computer kernel: [    6.628000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug  5 01:13:33 user-computer kernel: [    6.628000]  sda:ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 5
Aug  5 01:13:33 user-computer kernel: [    6.644000] ACPI: PCI Interrupt 0000:00:1f.4[C] -> Link [LNK1] -> GSI 5 (level, low) -> IRQ 5
Aug  5 01:13:33 user-computer kernel: [    6.644000] uhci_hcd 0000:00:1f.4: UHCI Host Controller
Aug  5 01:13:33 user-computer kernel: [    6.644000] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
Aug  5 01:13:33 user-computer kernel: [    6.644000] uhci_hcd 0000:00:1f.4: irq 5, io base 0x0000d800
Aug  5 01:13:33 user-computer kernel: [    6.644000] usb usb2: configuration #1 chosen from 1 choice
Aug  5 01:13:33 user-computer kernel: [    6.644000] hub 2-0:1.0: USB hub found
Aug  5 01:13:33 user-computer kernel: [    6.644000] hub 2-0:1.0: 2 ports detected
Aug  5 01:13:33 user-computer kernel: [    6.652000]  sda1 sda2
Aug  5 01:13:33 user-computer kernel: [    6.652000] sd 1:0:0:0: Attached scsi disk sda
Aug  5 01:13:33 user-computer kernel: [    6.752000] ACPI: PCI Interrupt 0000:02:0b.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
Aug  5 01:13:33 user-computer kernel: [    6.752000] 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
Aug  5 01:13:33 user-computer kernel: [    6.752000] 0000:02:0b.0: 3Com PCI 3c905B Cyclone 100baseTx at d081e000.
Aug  5 01:13:33 user-computer kernel: [    6.884000] usb 1-1: new low speed USB device using uhci_hcd and address 2
Aug  5 01:13:33 user-computer kernel: [    7.060000] usb 1-1: configuration #1 chosen from 1 choice
Aug  5 01:13:33 user-computer kernel: [    7.104000] Attempting manual resume
Aug  5 01:13:33 user-computer kernel: [    7.168000] kjournald starting.  Commit interval 5 seconds
Aug  5 01:13:33 user-computer kernel: [    7.168000] EXT3-fs: mounted filesystem with ordered data mode.
Aug  5 01:13:33 user-computer kernel: [    7.312000] usb 1-2: new full speed USB device using uhci_hcd and address 3
Aug  5 01:13:33 user-computer kernel: [   17.488000] usb 1-2: configuration #1 chosen from 1 choice
Aug  5 01:13:33 user-computer kernel: [   17.492000] usbcore: registered new interface driver hiddev
Aug  5 01:13:33 user-computer kernel: [   17.564000] input: Logitech USB Mouse as /class/input/input2
Aug  5 01:13:33 user-computer kernel: [   17.564000] input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:1f.2-1
Aug  5 01:13:33 user-computer kernel: [   17.564000] usbcore: registered new interface driver usbhid
Aug  5 01:13:33 user-computer kernel: [   17.564000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Aug  5 01:13:33 user-computer kernel: [   18.832000] Bluetooth: Core ver 2.11
Aug  5 01:13:33 user-computer kernel: [   18.832000] NET: Registered protocol family 31
Aug  5 01:13:33 user-computer kernel: [   18.832000] Bluetooth: HCI device and connection manager initialized
Aug  5 01:13:33 user-computer kernel: [   18.832000] Bluetooth: HCI socket layer initialized
Aug  5 01:13:33 user-computer kernel: [   18.856000] Bluetooth: HCI USB driver ver 2.9
Aug  5 01:13:33 user-computer kernel: [   18.860000] usbcore: registered new interface driver hci_usb
Aug  5 01:13:33 user-computer kernel: [   19.080000] eth0:  setting full-duplex.
Aug  5 01:13:33 user-computer kernel: [   20.292000] NET: Registered protocol family 17
Aug  5 01:13:33 user-computer kernel: [   22.280000] Linux agpgart interface v0.102 (c) Dave Jones
Aug  5 01:13:33 user-computer kernel: [   22.304000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Aug  5 01:13:33 user-computer kernel: [   22.308000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Aug  5 01:13:33 user-computer kernel: [   22.548000] iTCO_vendor_support: vendor-support=0
Aug  5 01:13:33 user-computer kernel: [   22.548000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
Aug  5 01:13:33 user-computer kernel: [   22.548000] iTCO_wdt: No card detected
Aug  5 01:13:33 user-computer kernel: [   22.588000] agpgart: Detected an Intel i845 Chipset.
Aug  5 01:13:33 user-computer kernel: [   22.592000] agpgart: AGP aperture is 64M @ 0xe0000000
Aug  5 01:13:33 user-computer kernel: [   23.012000] input: PC Speaker as /class/input/input3
Aug  5 01:13:33 user-computer kernel: [   23.212000] parport: PnPBIOS parport detected.
Aug  5 01:13:33 user-computer kernel: [   23.212000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
Aug  5 01:13:33 user-computer kernel: [   23.764000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 12
Aug  5 01:13:33 user-computer kernel: [   23.764000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 12 (level, low) -> IRQ 12
Aug  5 01:13:33 user-computer kernel: [   24.080000] intel8x0_measure_ac97_clock: measured 54912 usecs
Aug  5 01:13:33 user-computer kernel: [   24.080000] intel8x0: clocking to 48000
Aug  5 01:13:33 user-computer kernel: [   24.348000] fuse init (API version 7.8)
Aug  5 01:13:33 user-computer kernel: [   24.400000] lp0: using parport0 (interrupt-driven).
Aug  5 01:13:33 user-computer kernel: [   24.432000] Bluetooth: L2CAP ver 2.8
Aug  5 01:13:33 user-computer kernel: [   24.432000] Bluetooth: L2CAP socket layer initialized
Aug  5 01:13:33 user-computer kernel: [   24.440000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Aug  5 01:13:33 user-computer kernel: [   24.520000] Adding 2000052k swap on /dev/disk/by-uuid/3f178f3c-2ed1-432b-be05-d41a61869542.  Priority:-1 extents:1 across:2000052k
Aug  5 01:13:33 user-computer kernel: [   24.680000] EXT3 FS on sda2, internal journal
Aug  5 01:13:33 user-computer kernel: [   30.020000] NET: Registered protocol family 10
Aug  5 01:13:33 user-computer kernel: [   30.020000] lo: Disabled Privacy Extensions
Aug  5 01:13:33 user-computer kernel: [   30.940000] Using specific hotkey driver
Aug  5 01:13:33 user-computer kernel: [   31.100000] No dock devices found.
Aug  5 01:13:33 user-computer kernel: [   31.340000] input: Power Button (FF) as /class/input/input4
Aug  5 01:13:33 user-computer kernel: [   31.352000] ACPI: Power Button (FF) [PWRF]
Aug  5 01:13:33 user-computer kernel: [   31.392000] input: Power Button (CM) as /class/input/input5
Aug  5 01:13:33 user-computer kernel: [   31.392000] ACPI: Power Button (CM) [PWRB]
Aug  5 01:13:33 user-computer kernel: [   31.412000] input: Sleep Button (CM) as /class/input/input6
Aug  5 01:13:33 user-computer kernel: [   31.412000] ACPI: Sleep Button (CM) [SLPB]
Aug  5 01:13:33 user-computer kernel: [   31.628000] pcc_acpi: loading...
Aug  5 01:13:35 user-computer dhcdbd: Started up.
Aug  5 01:13:35 user-computer dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.reason
Aug  5 01:13:35 user-computer dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.reason
Aug  5 01:13:37 user-computer kernel: [   36.460000] ppdev: user-space parallel port driver
Aug  5 01:13:38 user-computer hpiod: 1.7.3 accepting connections at 2208... 
Aug  5 01:13:38 user-computer kernel: [   37.596000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
Aug  5 01:13:38 user-computer kernel: [   37.596000] apm: overridden by ACPI.
Aug  5 01:13:40 user-computer dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.host_name
Aug  5 01:13:40 user-computer dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.nis_domain
Aug  5 01:13:40 user-computer dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.nis_servers
Aug  5 01:13:40 user-computer diald[4890]: start sl0: SIOCSIFMETRIC: Operation not supported 
Aug  5 01:13:40 user-computer kernel: [   39.420000] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
Aug  5 01:13:40 user-computer kernel: [   39.420000] CSLIP: code copyright 1989 Regents of the University of California.
Aug  5 01:13:40 user-computer kernel: [   39.420000] SLIP linefill/keepalive option.
Aug  5 01:13:47 user-computer kernel: [   47.308000] Bluetooth: RFCOMM socket layer initialized
Aug  5 01:13:47 user-computer kernel: [   47.308000] Bluetooth: RFCOMM TTY layer initialized
Aug  5 01:13:47 user-computer kernel: [   47.308000] Bluetooth: RFCOMM ver 1.8
Aug  5 01:14:40 user-computer gconfd (user-7332): inizializzazione (versione 2.18.0.1), pid 7332, utente "user"
Aug  5 01:14:40 user-computer gconfd (user-7332): L'indirizzo "xml:readonly:/etc/gconf/gconf.xml.mandatory" è stato risolta ad una sorgente di configurazione in sola lettura in posizione 0
Aug  5 01:14:40 user-computer gconfd (user-7332): L'indirizzo "xml:readwrite:/home/user/.gconf" è stato risolto ad una sorgente di configurazione scrivibile in posizione 1
Aug  5 01:14:40 user-computer gconfd (user-7332): L'indirizzo "xml:readonly:/etc/gconf/gconf.xml.defaults" è stato risolta ad una sorgente di configurazione in sola lettura in posizione 2
Aug  5 01:14:40 user-computer gconfd (user-7332): L'indirizzo "xml:readonly:/var/lib/gconf/debian.defaults" è stato risolta ad una sorgente di configurazione in sola lettura in posizione 3
Aug  5 01:14:40 user-computer gconfd (user-7332): L'indirizzo "xml:readonly:/var/lib/gconf/defaults" è stato risolta ad una sorgente di configurazione in sola lettura in posizione 4
Aug  5 01:14:47 user-computer gconfd (user-7332): L'indirizzo "xml:readwrite:/home/user/.gconf" è stato risolto ad una sorgente di configurazione scrivibile in posizione 0
Aug  5 01:16:59 user-computer pppd[7542]: pppd 2.4.4 started by user, uid 1000
Aug  5 01:16:59 user-computer kernel: [  238.436000] PPP generic driver version 2.4.2
Aug  5 01:16:59 user-computer pppd[7542]: Using interface ppp0
Aug  5 01:16:59 user-computer pppd[7542]: Connect: ppp0 <--> /dev/rfcomm0
Aug  5 01:16:59 user-computer pppd[7542]: CHAP authentication succeeded
Aug  5 01:16:59 user-computer pppd[7542]: CHAP authentication succeeded
Aug  5 01:16:59 user-computer kernel: [  238.872000] PPP BSD Compression module registered
Aug  5 01:16:59 user-computer kernel: [  238.940000] PPP Deflate Compression module registered
Aug  5 01:17:01 user-computer pppd[7542]: Modem hangup
Aug  5 01:17:01 user-computer pppd[7542]: Connection terminated.
Aug  5 01:17:01 user-computer pppd[7542]: Exit.
Aug  5 01:17:19 user-computer gconfd (root-7606): inizializzazione (versione 2.18.0.1), pid 7606, utente "root"
Aug  5 01:17:19 user-computer gconfd (root-7606): L'indirizzo "xml:readonly:/etc/gconf/gconf.xml.mandatory" è stato risolta ad una sorgente di configurazione in sola lettura in posizione 0
Aug  5 01:17:19 user-computer gconfd (root-7606): L'indirizzo "xml:readwrite:/root/.gconf" è stato risolto ad una sorgente di configurazione scrivibile in posizione 1
Aug  5 01:17:19 user-computer gconfd (root-7606): L'indirizzo "xml:readonly:/etc/gconf/gconf.xml.defaults" è stato risolta ad una sorgente di configurazione in sola lettura in posizione 2
Aug  5 01:17:19 user-computer gconfd (root-7606): L'indirizzo "xml:readonly:/var/lib/gconf/debian.defaults" è stato risolta ad una sorgente di configurazione in sola lettura in posizione 3
Aug  5 01:17:19 user-computer gconfd (root-7606): L'indirizzo "xml:readonly:/var/lib/gconf/defaults" è stato risolta ad una sorgente di configurazione in sola lettura in posizione 4

Se non riesco a risolvere questo problema entro oggi, il mio amico sarà costretto ad abbandonare ubuntu, e questo non deve succedere!!

[Muffu]

@cingo_5

Di solito, il casino succede perchè in /etc/ppp/options c'è il commento davanti alla direttiva "noauth".

Cerca le righe :

# Require the peer to authenticate itself before allowing network
# packets to be sent or received.
# Please do not disable this setting. It is expected to be standard in
# future releases of pppd. Use the call option (see manpage) to disable
# authentication for specific peers.
# noauth

Togli il # davanti a noauth in modo che diventi :

noauth


A me ha fatto rinc....ehm.... mi ha creato problemi più volte proprio con l'error code 16. Prova e fammi sapere.

Mi dispiace di aver visto il topic solo oggi (per caso), sennò te lo avrei suggerito prima. Se poi in realtà non risolvi, allora sono un pirla e scusa se ti ho fatto perder tempo 

Ciao !

[Shaved]

Mi dispiace di aver visto il topic solo oggi (per caso), sennò te lo avrei suggerito prima. Se poi in realtà non risolvi, allora sono un pirla e scusa se ti ho fatto perder tempo 

Mi sa invece che l'indicazione è quella giusta

Spesso anche con i modem analogici a 56k devi fare questa mossa (b2b)

[cingo_5]

Scusate l'assenza, è un periodo no e non c'ho molto tempo da dedicare al pc,
grazie della risposta!  cmq...
in quel file avevo già così:

Codice: Seleziona tutto

# Require the peer to authenticate itself before allowing network
# packets to be sent or received.
# Please do not disable this setting. It is expected to be standard in
# future releases of pppd. Use the call option (see manpage) to disable
# authentication for specific peers.
noauth
#auth

ho provato a togliere il commento a auth però non si collega per niente...
ho remmato entrambe le righe però non si collega ugualmente...
sento che la soluzione è in quel file però (non chiedetemi perchè) appena c'ho tempo ci metterò le mani con impegno cambiando un pò di impostazioni, intanto se qualcuno ha un lampo di genio... beh io sono qui! 

@ Shaved: il credito ce l'ho non sono così rimba  (rotfl) , ado un'occhiata anche /var/log/messages e ve lo posto, grazie!

[Shaved]

Provo a suggerirti un'altra soluzione un po'....estrema :
nel file /etc/ppp/options commenta le righe

Codice: Seleziona tutto

lcp-echo-interval 30
cp-echo-failure 4

[...]@ Shaved: il credito ce l'ho non sono così rimba  (rotfl) , ado un'occhiata anche /var/log/messages e ve lo posto, grazie!

Ops....allora mi devo preoccupare: a me è successo di non avere più credito senza accorgermene. La Tim prevede che si vada anche "sotto zero" e si continui lo stesso ad usufruire del servizio

[cingo_5]

Mi sono venute in mente altre 2 prove che posso fare  :
1. posso provare a fare la connessione con un altro telefono lg umts (me lo faccio prestare da un mio amico), così sono sicuro che non sia un problema hardware!
2. non ho provato con una connessione "standard" esempio con tiscali con i numeri 702345... etc etc, se mi da lo stesso errore allora sono sicuro che è un problema di conf. del modem...

il problema è che mi vengono in mente le cose da fare ma non c'ho tempo per provarle!!!!!  :'(

Ops....allora mi devo preoccupare: a me è successo di non avere più credito senza accorgermene. La Tim prevede che si vada anche "sotto zero" e si continui lo stesso ad usufruire del servizio

(rotfl) grande! non so se la stessa cosa vale per 3, comunque non importa tanto quel telefono lo uso solo per "provare" a collegarmi in umts